BalanceRecurring type for system accounts

Hi All!
Is it possible to make system accounts (like Shares Owned etc) with type Balance Recurring?
I just want to enter or calculate data for system accounts in Jan and use it in next periods. And I want change it for next periods only if I need, but not for all periods.
Thanks in advance!

It is not possible to change the Account Type of the system account. You can create a new account which you can tag as Balance Recurring and in the calulation sub routine you can flow that accounts value to the system account.
Hope this is helpful
Varun

Similar Messages

  • Valuation type for two account category reference

    Hi Experts
    I created valuation type for
    1)     DOMESTIC & IMPORT with account category reference 0001 (for raw material)
    it is applicable only with ROH material type.
    2)     Same Valuation type DOMESTIC & IMPORT system donu2019t allow to create for other account category reference 0003 ( it is for ZESS spares)
    Here requirement is material type ROH & ZESS need to DOMESTIC purchase and IMPORT purchase. hence both material type need DOMESTIC & IMPORT  valuation type How to solve this?
    karan

    Assign both the valuation class to the account category reference. And then assign both the material types to the same account category reference.
    You can assign multiple valuation class to an Account Category Reference.
    A valuation class can only be assigned to only one account category reference
    Only ONE account category reference can be assigned to a material type
    where as multiple Material Types can be assigned to a account category reference.
    Hope this helps!!
    Edited by: Reetesh on Dec 5, 2011 7:54 AM
    Edited by: Reetesh on Dec 5, 2011 8:06 AM

  • Contact Type for an Account

    Why 'Contact Type' is required to be entered for an Account, as we already define 'Account Type' and ideally same should be populated for a 'Contact Type' while linking a 'Contact' to 'Account'? Any specific reason ? (Scenario > I am first creating an Account & then linking Contact to an Account)

    Hi Bobb,
    Thx for you answer, but i am still not convinced on a contact being linked to multiple Accounts,
    Lets take a scenario; i created an Account "General Electric" with Account Type = 'Customer'. I am now creating a contact for this account (from Account Detail page) named "Mr. John Miller"; logically this contact should be 'Customer' type only, as i cannot have this contact as my 'Competitor' or something else. Do you agree?

  • "my card" in address book for system accounts

    I have four macs.. I would love to have them refer to the same card in the Address Book for my logon.. instead I have four seperate cards.. Can anyone give me any leads?

    no help here .. but hey I am down to two macs with my G% and powerbook dying.. less of a [problem

  • System Account tied to RSO

    Is it ok to change the configuration for system accounts to use an alternative user? In most cases, this would be prodikaadmin. While testing Reduced Sign-On, the prodikaadmin account cannot be used to login to the UI (since it's not currently setup in active directory) and is causing other issues based on what was configured in the Setup Assistant tool. Would adding prodikaadmin to an active directory group resolve this? Or what is the recommended process?
    Thanks!

    Unfortunately, our reference LDAP authentication strategy was not updated for the 6.1.1.1 release. It is missing some code. However, we have a way that you can get around this.
    For your Prod environment, you will have to change your authentication configuration a little bit. We basically have an Authentication strategy that is composed of other authentication strategies, and it will handle the scenario where one of the authentication strategies (in this case, your LDAP one) doesn’t implement the new interface methods. Basically, it wraps your LDAP authentication safely, so that you don’t need to make any code changes in your LDAP class.
    Here is what you should try:
    You are going to change your AuthenticationStrategy to a new one, we’ll call CompositeLDAP.
    You’ll add this CompositeLDAP as a new Authentication strategy to the AuthenticationStrategies node. This composite strategy has subnodes to say which of the other authentication strategies this should wrap/use.
    So here we add a new IncludedStrategy node, and reference your RSO LDAP one. If your prod environment also used Prodika authentication for a prodikaadmin type user, then you would add another IncludedStrategy with the id of “Prodika”, but then you would have to change the allMustPass attribute value to false.
    <AuthenticationService configChildKey="name">
                            <envvar name="UseTrustBridge" value="true" configAttributeOverrideBehavior="Replace"/>
                                    <!-- Uncomment the following and fill in the LDAP server configuration to enable LDAP authentication -->
                                    <envvar name="AuthenticationStrategy" value="CompositeLDAP" configAttributeOverrideModifier="IsLocked"/>
                                    <envvar name="AuthenticationStrategies">
                                              <AuthenticationStrategy id="LDAP" ldapServer="LDAP://LDAP_SERVER:PORT" userDomain="DOMAIN"/>         
                                              <AuthenticationStrategy id="CompositeLDAP" 
    factory="Class:Xeno.Prodika.Services.AuthenticationBridgeService.CompositeAuthenticationStrategyFactory,GeneralServices"
    allMustPass="true">
    <IncludedStrategy id="LDAP" />
    </AuthenticationStrategy>
    </envvar>
                                    <envvar name="EncryptionScheme" value="SHA256" configAttributeOverrideModifier="IsLocked"/>
    </AuthenticationService>
    Hope that isn’t too confusing.
    Give this a try, and let me know how it goes.
    Regards,
    Ron

  • Designer Workflows with System Account

    Hi..
    I created a SharePoint List Workflows using SharePOint Designer and i want to know the reason why workflow not working for
    System Account and for remaining users it working fine.
    Ravindranath

    Check these links...you may find your answer here...
    http://blogs.msdn.com/b/sowmyancs/archive/2009/03/31/issue-with-sharepoint-designer-workflow-to-start-under-system-acccount.aspx?Redirected=true
    https://blogs.technet.com/b/victorbutuza/archive/2009/03/14/workflows-do-not-start.aspx
    ***If my post is answer for your query please mark as answer***
    ***If my answer is helpful please vote***

  • XI Installation: SAP System Account+Password- Login failed

    Hi All,
    This is my first attempt in installing XI.
    I have installed SAP Web AS 6.40 ABAP+Java System and am trying to install XI now.
    I can also confirm that my J2EE engine is up and running. I ran the J2EE example on HTTP using port 50000.
    Here is my basic config:
    VMWare with Windows 2003 Server SE, 60Gigs dedicated HDD space, 2Gig RAM, MS SQL Server 2k Enterprise SP4.
    My Problem is that when I run the "XI Installation" from "NetWeaver Components Running on Java" I get asked for my SAP System Account's (user: l01adm) password. I know what my password for System account is, but for some reason I get "Invalid Password" error message from SAPInst GUI program.
    Since I am very new to SAP Web AS and XI, there could be quite a few reasons why this is not working.
    Could anyone please shed some light my direction regarding the possible things that could be causing my problem?
    Regards,
    -Alen Ribic

    C if any of these threads can help you out -
    XI Installation: invalid XI SAP <sid>adm password
    Re: invalid password during xi-installation
    Also ref note : 721548

  • I need to delete my Apple ID on my iPhone 4.  I forgot my psw for my account.  When I answer the security question, the system responds incorrect answer.  I created a new Apple iTunes account but I still unable to delete the old iTunes account.

    I need to delete my Apple ID on my iPhone 4.  I forgot my psw for my account.  When I answer the security question, the system responds incorrect answer.  I created a new Apple iTunes account but I still unable to delete the old iTunes account.

    AppleFAN7591 wrote:
    I need to delete my Apple ID on my iPhone 4.  I forgot my psw for my account.  When I answer the security question, the system responds incorrect answer.  I created a new Apple iTunes account but I still unable to delete the old iTunes account.
    How to reset your Apple ID password.
    Go to iforgot.apple.com and type in your Apple ID, then click 'Next'.
    Verify your date of birth, then click 'Next'.
    You'll be able to choose one of two methods to reset your password, either E-Mail Authentication or Answer Security Questions.
    If neither method works, then go to https://getsupport.apple.com
    (If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
    Choose 'More Products & Services', then 'Apple ID'.
    A new page will open.
    Choose 'Other Apple ID Topics', then 'Lost or forgotten Apple ID password'.
    Click the blue 'Continue' button.
    Select the contact option that suits your needs best.
    How to reset your Apple ID security questions.
    Go to appleid.apple.com, click on the blue button that says 'Manage Your Apple ID'.
    Log in with your Apple ID and password. (If you have forgotten your Apple ID password, go to iforgot.apple.com first to reset your password with a password recovery email)
    Go to the Password & Security section on the left side, and click on the link underneath the security questions that says 'Forgot your answers? Send reset security info email to [email]'.  This will generate an automated e-mail that will allow you to reset your security questions.
    If that doesn't work, or  there is no rescue email link available, then click on 'Temporary Support PIN' that is in the bottom left side, and generate a 4-digit PIN for the Apple Account Security Advisor you will be contacting later.
    Next, go to https://getsupport.apple.com
    (If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
    Choose 'More Products & Services', then 'Apple ID'.
    A new page will open.
    Choose 'Other Apple ID Topics', then 'Forgotten Apple ID Security Questions'.
    Click the blue 'Continue' button.
    Select the contact option that suits your needs best.

  • System don`t check an order number for CO account assignment

    hi,
    I have this problem. When I creta a sales order in CRM and then system creates as a follow up document a sales order in SD system don`t check an order number for CO account assignment. If I want to create a sales order not as a follow up document, but directly in transaction VA01 and I use exactly the same data system gives me a message " The CO account assignment object belongs to company code X, not Y
    You want to make a posting in company code Y.
    At the same time, a CO account assignment object was specified that is assigned to company code X.
    This is account assignment object with object type ORD, and object key 1xxxxxxxxxxx...".
    My question is why system don`t check order number when a sales order in SD is created as a follow up document and what should I do to correct this.
    Regards,
    Mateusz

    Check note
    a)  352261  or
    b)  557562
    thanks
    G. Lakshmipathi

  • Cost Distribution in Shopping Cart for different account assignment type

    Hi friends,
    We are at SRM Server 5.5 at level SAPKIBKT07. Business scenario is extended classic.
    User is creating a shopping cart with single line item and distributing the cost to multiple account assignments (say Cost Center and Order). Shopping cart has a valid source of supply. System creates a PO in SRM and tryu2019s to replicate the PO in ECC backend, however fails to replicate.
    My understanding is that in ECC backend it is not possible to combine two different account assignments while distributing cost at item details.
    Solution would be to create separate line items for different account assignments (distribute between similar account assignments).
    Is my understanding right?
    Thanking you in advance,
    Sandeep

    Sreedhar,
    Thanks for your update.
    I am also MM consultant, so as far as MM goes we can only maintain one account assignment type per line item. In MM we have provision of multiple account assignment but it works only for single account assignment type per line item. Which means if account assignment is "k" then we can split between multiple cost centers, but we cannot split between cost center and WBS element in one line item.
    You said it is possible to split between multiple account assignments in one line item. Will it be possible for you to try at your end and let me know how PO/PR are created in backend?
    Sandeep

  • F-29 Customer down payment, error, system ask for vendor account

    Hello,
    When I enter customer down payment through F-29 I receive message F5243 'Account type K is not defined for document type DZ'.
    If I use other document type, I receive the same message. I DO NOT NEED ACCOUNT TYPE 'VENDOR' HERE. (When I choose with F4 I receive search for CUSTOMER, and special GL also for CUSTOMER.)
    If I change that (and allow acct type 'K'), system issue message F5104 'Vendor not created in CoCode'.
    If, for example I have the same number for vendor and customer (SAME NUMBER, NOT THE SAME COMPANY), system allows me to go further, but takes information for 'Vendor down payment' (made in Customizing).
    I would like to point that there is no link in master date between customer and vendor account.
    My only clue is that something is wrong with this transaction (there is no SAP note for this exact problem, and all other posts on the same subject here on SDN are not resolved)
    Maybe someone has idea about connection of this tcode with logistic...
    PLEASE HELP

    Hi Amina,
    For that u check weather u assign vendor special gl account to customer reconcile account in OBXR.
    Select special gl type  D in OBXR and give the reconcilation account of customer and special gl account
    Regards
    Surya

  • SSRS Database Configuration Manager Error - Could not connect to server: The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception

    I'm Getting the "Could not connect to server: The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception" Error on an existing Instance of SSRS that had been working previously (lots of installs/patches since).
    Any time I try to hit the "Test Connection" button on existing connections or create new ones from the SSRS Config Mgr., it throws that error.
    I know the SQL Server connectivity works (I have SSMS installed on there and can cut and paste server Login to connect). The problem is I can't really get any more details on the error...Event Viewer isn't logging anything, I have upped the trace level
    to 4 in the reportingservicesservice.config file, I have even watched it with procmon and nothing obvious pops up.
    Let me know if anyone else has been down this path and what they have tried.

    Hi BillOlive,
    Based on my research, the issue may be related to user access permission. You can refer to the following method to troubleshooting the issue:
    Open C:\Windows\Microsoft.NET\Framework\v2.0.50727\CONFIG folder | right click on the machine.config file | Properties | Security | make sure your domain account has FULL CONTROL permission on this file.
    If above steps still do not work, please backup your machine.config file to somewhere else and replace with the attached one from my Windows Server 2008 environment.
    Alternatively, app.config file also may cause the same issue. There is a similar issue, you can refer to it.
    http://stackoverflow.com/questions/6922879/exception-type-initializer-for-system-data-sqlclient-sqlconnection
    Hope this helps.
    Regards,
    Alisa Tang
    If you have any feedback on our support, please click
    here.
    Alisa Tang
    TechNet Community Support

  • What is the password for predefined SYSTEM account

    Hi ,
    i am trying to use predifined account called as 'SYSTEM' to assign priviliges to a user .
    But i am unable to login into SYSTEM account .
    please tell me what is the password for this SYSTEM account . . Thanks

    If anybody has forgotten their SYSTEM account , do this way
    Start SQL*Plus (Start -> Programs -> Oracle – Instance Name -> Application Development -> SQL Plus).
    At the login prompt, in the user-name field, type ”/as sysdba” (including the forward slash, but without the quotes). Click OK.
    You are now connected as system with full DBA rights.
    To reset the password of the SYSTEM password (or any other user password), run the following query:
    alter user system identified by NewPasswordHere;
    Keep helping others .

  • How do I remove a credit/debit card from my account? I ask because I currently have a VISA gift/debit card with 50 dollars on it, but the money has run out so I want to usea new card. Also, there is no 'None' check option for payment type on my account.

    How do I remove a credit/debit card from my account? I ask because I currently have a VISA gift/debit card with 50 dollars on it, but the money has run out so I want to usea new card. Also, there is no 'None' check option for payment type on my account.

    Depending on how you created your account, "None" may or may not be an option. I believe it has something to do with whether the account was made through an App Store request or the regular iTunes Store. For example, my account allows no card but my father's doesn't allow there to be no card.
    To change the card, go to your account settings and change the information to your new card, and hit save.

  • RSAR2318 : IDoc type for source system T90CLNT090 is not available

    Hi all,
    I am working on BI + ECC 6.0. Have created a ODS object using RSA1OLD. While activating the ODS, am getting this error:
    1. Error:
    R7I028
    Object could not be activated
    2. Error:
    RSAR238
    IDoc type for source system T90CLNT090 is not available
    Error when creating the export datasource and dependent objects
    Error RSAR238 : IDoc type for source system T90CLNT090 is not available
    I have already checked trx & dtps, but could not find resolution.
    Kindly help me with this error.
    Thanks and regards,
    MS

    M Sharma wrote:
    But how exactly can I create when T90CLNT is not active? Help please.
    Yes, you would need to check with BASIS team how they have created an alternate source system (for debugging) & prepare a RFC b/n these systems. Can you just check the settings in the source system and BI source system...and check the source system for the same BI system. Right click > Check and then do a restore or take the help of basis to fix it. What I think is a possible solution is : RSA1 > Source system > Search System > Right Click > Activate

Maybe you are looking for