BAM Data Source and deployment setting in weblogic

like In db adapter we need to create datasource and deployment plan in weblogic. what I want to know is this same process is valid for BAM adapter also? If yes, what we will specify in baam data source (What configuration i need to give).
one more thing i noticed that, Outbound connection pool option is also not coming under BAM configuration
Please help!!
Thanks,

hello,
For BAM related settings are out of the box in web-logic server,here below points are describes steps to setup the Datasource whatever you call;
1. In the Settings for oracle-bam-adapter page, select the Configuration tab, and then the Outbound Connection Pools tab.
2. Configure the connection factory interface that you intend to use in Oracle JDeveloper, by expanding the appropriate Group and Instance target and clicking the Java Naming and Directory Interface (JNDI) name.
3. To configure the connection factory for RMI-based calls, click to expand the oracle.bam.adapter.adc.RMIConnectionFactory group and select the JNDI name that the user uses in Oracle JDeveloper. The eis/bam/rmi connection factory is provided out of the box.
4. To configure the connection factory for SOAP-based calls, click to expand the oracle.bam.adapter.adc.SOAPConnectionFactory group and select the JNDI name that the user uses in Oracle JDeveloper. The eis/bam/soap connection factory is provided out of the box.
Hostname : local host (host name of BAM server)
Instance Name: ADCServer1 (default for RMI)
Password : welcome1 (password of BAM server)
Port Number : 9001(port number of BAM server)
Username : weblogic (user name of BAM server)
5. after saving it need to re-deploy OracleBAMAdaper, In deployments select OracleBAMAdapter click Update button.
I hope these steps are helpful.
PS Outbound connection pool option is also not coming under BAM configuration -- for this check BAM server is running or not or any other BAM server installation or ect.
Thanks
Siva Sankar
TechDemocracy

Similar Messages

Create a Generic Data Source and deploy a webservice on a domain using WLST

Hello for everyone,
I usually create generic data sources and deploy webservices on a wls domain by using the Administrator Console. I wonder if you can pass me a script sample to do this task by using WSLT. On the other hand, if you can pass me a "quick start" guide about WLST, this would be very helpful.
Additionally, may I be able to create groups, application roles and users to a domain by using WLST?
Thanks for your help.

You can use standard infoobjects as well..
You can create a view on those R/3 tables and use this view for creating a generic datsource in RSO2 transaction..
Check the below pdf for delta in generic datasources
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33

Issue with data source after deploying

We are experiencing an issue with our data source after deployment of a cube. On the datasource properties in Visual Studio 2012, we have the max connections set to 0 before the deployment. Once the cube is deployed, I can navigate to the <name>.0.ds.xml
file and open it and see that the <MaxActiveConnections>0</MaxActiveConnections> is indeed set to 0. At some point over the next couple days, a process of the cube or some other action causes that value to get updated to some number too large to
be converted to an int, and makes the datasource invalid. At that point we cannot view the datasource properties in SSMS, we cannot open the cube project from Visual Studio, and we’ve even had failures when trying to process the cube. Is there a config
somewhere that would cause this value to get overwritten, or some other behind the scenes process that we can look at?
Our server information is:
Microsoft SQL Server 2012 (SP1) - 11.0.3153.0 (X64)
                Jul 22 2014 15:26:36
                Copyright (c) Microsoft Corporation
                Enterprise Edition: Core-based Licensing (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
Chad Dotzenrod SWC | TECHNOLOGY PARTNERS 1420 Kensington Road, Suite 110 Oak Brook, Illinois 60523-2144 http://www.swc.com

Typically you would import the metadata from the source location and either use that location as the data source (and so not need to redeploy), or deploy it to a separate target location.
The replace action is destructive as you've found, and effectively performs a drop table followed by create table. Hence any data in the table is lost.
If you just want the Control Center Manager to correctly display that the table is deployed, try setting the action to "Upgrade". This will try to upgrade the deployed object to match the definition in OWB, but as the two are identical this will result in no changes. However, it will update the deployment records to indicate that the object is deployed.
Nigel.

Create a ReportingServices data source and upload to a data connection library

I have installed reporting services 2012 in SharePoint 2013 integrated mode. I need to create a report data source and upload it to a data connection library using
C#.
As I know it uses the ReportingServices2010 class but I cannot explore a reporting server url.
There is a ReportingServices2010.asmx file in the 15 hive though.
Also it works fine when I manually set the data source.

Hi,
The following materials would be helpful:
Inserting Data Connections into a SharePoint Library
https://social.technet.microsoft.com/Forums/en-US/df79dce5-fd92-4506-af4e-11127cb0d655/inserting-data-connections-into-a-sharepoint-library?forum=sharepointdevelopment
Programmatically exporting reports from SQL 2012 Reporting Services
http://stackoverflow.com/questions/12199995/programmatically-exporting-reports-from-sql-2012-reporting-services
Report Server Web Service Endpoints
http://msdn.microsoft.com/en-us/library/ms155398(v=sql.110).aspx
Best Regards
Dennis Guo
TechNet Community Support

Change PowerPivot data source when deploying from Dev - Staging - Production

We have PowerPivot workbooks we store in SharePoint 2013 Libraries.
We have a powershell script which automates the deployment of sites and pages. Is there a way using PowerShell (or any scripting language really) to look into the workbook and change the PowerPivot data source when deployment from one environment to
another? (Dev -> Stage -> Prod) We need to update the workbooks to point to our SSAS cubes Dev -> Stage -> Prod respectively.
Thank you for any expert advice you may offer,
Sincerely,
-Craig

Basically, it's an excel file (XLSX) file and you can use excel OM for this.
A simple program (in C# or any language of your choice) can be written to do the following and achieve what you need.
using XLS = Microsoft.Office.Interop.Excel;
string info = null;
XLS.Application application = null;
try
application = new XLS.Application();
var book = application.Workbooks.Open(filepath);
foreach (XLS.WorkbookConnection wc in book.Connections)
  switch (wc.Type)
   case XLS.XlConnectionType.xlConnectionTypeOLEDB:
    info = wc.Name + " " + wc.OLEDBConnection.Connection.ToString() + "\r\n";
    break;
book.Close();
finally
if (application != null)
  application.Quit();
Hopefully, this was helpful.

Data source and attribute list transport

Hello gurus!
How can we transport data source and attribute list to another system?
In IMG system writes "Transport is not required".
Best regards,
Artur Litvinov.

Hi Artur
Attribute sets can be transfered thorugh RFC connection. Create the RFC of the source system in target system, then import the Attribute sets using the option "Transfer of Attribute Sets from Other System " tcode CRMD_MKT_TOOLS - Expert Tools.
Hope this will help
Rgds
Mallikarjun

OWB 10g -- Can't Create Database Links for Data Source and Target

We installed OWB 10g server components on a Unix box running Oracle 10g (R2) database. The Designer Repository is in one instance. The Runtime Repository and the Target are in another instance. The OWB client component was installed on Windows XP. We create a data source module and a target module in OWB. The data source is on another Unix box running Oracle 9i (R2) database. We try to create database links for data source module and target module, respective. But when we created and tested the DB links, the DB links were failed.
For the database link of data source, we got the following error message:
Testing...
Failed.
SQL Exception
Repository Error:SQL Exception..
Class Name: CacheMediator.
Method Name: getDDEntryFromDB.
Repository Error Message: ORA-12170: TNS:Connect timeout occurred
For the database link of target , we got the following error message:
Testing...
Failed.
API2215: Cannot create database link. Please contact Oracle Support with the stack trace and the details on how to reproduce it.
Repository Error:SQL Exception..
Class Name: oracle.wh.ui.integrator.common.RepositoryUtils.
Method Name: createDBLink(String, String, String, String).
Method Name: -1.
Repository Error Message: java.sql.SQLException: ORA-00933: SQL command not properly ended.
However, we could connect to the two databases (data source and target) using the OWBs utility SQL Plus.
Please help us to solve this problem. Thank you.

As I said prior the database link creation should work from within the OWB client (also in 10).
Regarding your issue when deploying, have you registered your target locations in the deployment manager and did you first deployed your target location's connector which points out to your source?
I myself had some problems with database link creations in the past and I can't remember exactly what they were but it had something to do with
- the use of abnormal characters in the database link name
- long domain name used in as names.default_domain in my sqlnet.ora file
What you can do is check the actual script created when deploying the database link so see if there's something strange and check if executing the created script manually works or not.

How to change the Data sources after deploying the application ??

Hi All,
i want to know how to change the Data sources after deploying the application to the application server ???
I'm using Oracle Application Server 10g Release 3 (10.1.3.1.0)

Can you access the Enrprise Manager website of the target Application Server from your location? If so, you can change the datasource in it. If not, yo can bundle the datasource definition in your archive and use that one instead of the one configured in the target OC4J container. Or this will just be the responsability of your customer: whenever you send a new WAR file, they have to modify the datasource if needed and deploy the application?

Create two or more data sources and mapping to DSO

Hi,
I´m using SAP Netweaver BI 7.0.
If there are two or three data sources which have to be mapped to DSO which field from Data Sources has to be mapped to which field in DSO?
Is it possible to have only one DSO or should it be three DSOs because of the three Data Sources?
The thing is I have created one view out of three tables. For the view I have created one DSO. Everything worked fine. But now the requirements have changed because of currencies.
The view I have created is now mixing currencies because in the view is only one currency field, which is filled from the three tables. Two tables have different currencies and one table has one currency.
The one currency of the one table is important and should stay like it is.
I´m thinking about something like three different currency key fields in DSO which are mapped from data source. Also for every field of data source mapping with corresponding field in DSO.
Some hints? I have found articles in SDN about creating data sources and so on but they don´t help me in this matter.
Thank you in advance!

Thank you guys for explaining! I´m new to SAP BW and trying to better understand.
I`ll try it also with the view. It sounds "easier".
But if I´m doing it with the 3 data sources, that means that for each currency field of the data source I will need an corresponding currency field in the DSO for mapping.
Is it possible to have 3 times the 0Currency field in the DSO and each data source currency field will be mapped to the DSO?
If that would work the 0Currency has to be contained in the key figures.
But if the 0Currency is contained in each key figure will the assignment of currency work correct?
+For example:+
Data Source1:
Turnover in Euro.
(All currency is in Euro)
Data Source2:
Profit in Dollar.
Profit in Euro.
Profit in Yen.
Profit in different currencies available.
Data Source3:
Sales in Dollar.
Sales in Euro.
Sales in Yen.
Sales in different currencies available.
For mapping from DataSources to DSO if it is possible to have 3 times 0Currency in DSO:
Data Source1 currency fiield ---> DSO 0Currency
Data Source2 currency fiield ---> DSO 0Currency
Data Source3 currency fiield ---> DSO 0Currency
Does it make sense?

Help to read a table with data source and convert time stamp

Hi Gurus,
I have a req and need to write a ABAP prog. As soon as i excute ABAP program it should ask me enter a data source name, then my ABAP prog has excute teh code, in ABAP code i have to read a table with this data source as key, sort time stamp from table and should display the data source and time stamp as output.
As follows:
Enter Data Source Name:
Then user enters : 2lis_11_vahdr
Then out put should be "Data source :" 10-15-2008.
The time stamp format in table is 20,050,126,031,520 (YYYYMMDDhhmmss). I have to display as 05-26-2005. Any help would be apprciated.
Thanks,
Ram

Hi Jayanthi Babu Peruri,
I tried to extract YEAR, MONTH, DAY separately and using
EDIT MASK written it.
Definitely there will be some STANDARD CONVERSION ROUTINE will be there. But no idea about it.
DATA : V_TS      TYPE TIMESTAMP,
       V_TS_T    TYPE CHAR16,
       V_YYYY    TYPE CHAR04,
       V_MM      TYPE CHAR02,
       V_DD      TYPE CHAR02.
START-OF-SELECTION.
GET TIME STAMP FIELD V_TS.
V_TS_T = V_TS.
CONDENSE V_TS_T.
V_YYYY = V_TS_T.
V_MM   = V_TS_T+4(2).
V_DD   = V_TS_T+6(2).
V_TS_T(2) = V_MM.
V_TS_T+2(2) = V_DD.
V_TS_T+4(4) = V_YYYY.
SKIP 10.
WRITE : /10 V_TS," USING EDIT MASK '____-__-________'.
          /10 V_YYYY,
          /10 V_MM,
          /10 V_DD,
          /10 V_TS_T USING EDIT MASK '__-__-__________'.
If you want DATE alone, just declare the length of V_TS_T as 10.
Regards,
R.Nagarajan.
We can -

I added 0AMOUNT in generic data source and in rsa3 i am seeing the data ..b

i added 0AMOUNT in generic data source and in rsa3 i am seeing the data ..but i am not seeing any data in target table..
what would be the cause

Hi,
I guess you mean the target table in BW, correct?
First replicate your DSource in BW
Open your TRules. In tab Transfer structure/Datasource locate your field in the right pane (should be greyed, not blue); move it from to the left (to the transfer structure); reactivate and reload.
You should now see the field in your PSA table.
hope this helps...
Olivier.

SQL ENTERPRISE: The edition of Reporting Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database

The error below makes absolutely no sense! I'm using Enterprise Core...yet I'm being told I can't use remote data sources:
w3wp!library!8!03/05/2015-19:08:48:: i INFO: Catalog SQL Server Edition = EnterpriseCore
w3wp!library!8!03/05/2015-19:08:48:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: , Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: The feature: "The edition of Reporting
Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database." is not supported in this edition of Reporting Services.;
Really? This totally contradicts the documentation found here:
https://msdn.microsoft.com/en-us/library/ms157285(v=sql.110).aspx
That article says remote connections are completely supported.
ARGH! Why does this have to be so difficult to setup?!?

Hi jeffoliver1000,
According to your description, you are using Enterprise Core edition and you are prompted that you can’t use remote data sources.
In your scenario, we neither ignore your point nor be doubt with what you say. But actually we have met the case before that even though the SQL Server engine is Enterprise but the reporting services is still standard. So I would recommend you to find the
actual edition of reporting services you are using. You can find Reporting Services starting SKU in the Reporting Service logs ( default location: C:\Program Files\Microsoft SQL Server\<instance name>\Reporting Services\LogFiles). For more information,
please refer to the similar thread below:
https://social.technet.microsoft.com/Forums/en-US/f98c2f3e-1a30-4993-ab41-acbc5014f92e/data-driven-subscription-button-not-displayed?forum=sqlreportingservices
By the way, have you installed the other SQL Server edition before?
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Create a data source and database tables using WSAD

Hi, guys:
the following is from a tutorial:
http://www-106.ibm.com/developerworks/websphere/techjournal/0306_wosnick/wosnick.html
"To create the data source and Cloudscape database tables automatically, right click on the HelloWorldServer in the Servers view, and select the Create tables and data sources menu item. A dialog will then display showing that the data source and database tables were created successfully (Figure 5)."
I am using WSAD 5.0 trial version. I cannot find Create tables and data sources menu item if I right click on the HelloWorldServer in the Servers view. I am wondering if this is because trial version does not have this feature?
regards

This question is a little off topic but you may get a reply. Please note this forum is about Sun's J2EE SDK and its related technologies. You may have better luck posting your question to an IBM specific resource.

Non transactional data source and ejb transaction

Inside an ejb method with trans-attribute = Required,
Do a bunch of things using a transactional data source and a bunch of things using
a non trasnactional data source.
Looks like the time spent doing the non-transactional data source related work
does not count for the transaction timeout defined for the ejb.
So, what happens here, the ejb transaction is suspended ( when I start using the
non transactional ds ) ?

Hi,
"siddiqut" <[email protected]> wrote in message news:3fa7c79d$[email protected]..
Inside an ejb method with trans-attribute = Required,
Do a bunch of things using a transactional data source and a bunch of things using
a non trasnactional data source.
Looks like the time spent doing the non-transactional data source related work
does not count for the transaction timeout defined for the ejb.
So, what happens here, the ejb transaction is suspended ( when I start using the
non transactional ds ) ?The transaction is not suspended when you call something
which is not non-transactional.
Regards,
Slava Imeshev

Maintaining attributes, data source and attribute list in web UI

Hi
Can we maintain attributes, data source and attribute list in web UI level. We can do it in SAP GUI level but do we have the option of doing it on web UI level??
Regards
Aakshi

HI
data sources and Attribute lists need to be maintained in GUI but these can further be used for Segmentation in Web UI using the Graphical Modeler.
hey main thing is that when we design all the things our out put is reflected in both interface & most important thing is that 90% of our customization done in gui.only web_ui related customization done in web_ui.
for more details revert me back
debi prasad

BAM Data Source and deployment setting in weblogic

Similar Messages

Maybe you are looking for