Bank Holiday Blues - Access package in root directory..

I have the following file directory:
mainDir:
---- *PRESCRIPT (PACKAGE)
---- main.java (imports prescript & imports operators)
---- operators (package)
     |
     ----> *PRESCRIPT (PACKAGE)
     |
     ----> opertorA (imports prescript)
     |
     ----> opertorB (imports prescript)
     |
     ----> opertorC (imports prescript)
     |
     ----> opertorD (imports prescript)
     |
     ----> opertorE (imports prescript)
Currently I have the prescript package in two places and I would only like it to be in the main directory
I want to make a jar file for the program and I think that i can alter the manifest such that I can do this..
Any ideas guidance?

The manifest lists what it is in the jar, nothing more. If you want to prevent something from being in the jar then you need to use the jar command in such a way that only what you want is in there.

Similar Messages

What are these hidden drives in my root directory? Why can I not access them?

Noticed two drives (?) in my root directory a week or so back that were never there before, one called net and one called home. Also have been getting anomalous folders appearing on the left of explorer as 'shared' folders/devices. Odd thing is I have no access to them (read only attribute, but even less than read only as I can't actually read any data on them) and they say they are zero bytes and created in 2001?! But the "date modified" date is always right up to date. So why can I not delete them? Anyone know what these are? Are they normal? See this picture http://oi62.tinypic.com/iyzyc1.jpg
Would there be a way to use terminal to gain access or to dig a little deeper into what they are?

Another odd thing is the network icon in my root directory (which is set to neighborhood) when I click 'get info' the lock button is greyed out, and the more info just hangs on the 'fetching' spinning wheel.
Secondly I have a 'shared' device/server/folder(?) called Bthub4 on the left in explorer, right clicking 'get info' for that gives similar results with no access, or info. See pic below.
http://i60.tinypic.com/15n99cp.png
Trying to view the Bthub4 shared device/server/folder gives a prompt to enter a name and password "for the server 'bthub4'" No password (operating system, or wifi related) works, and the guest account fails to give me access to the server. Pic of prompt: http://i62.tinypic.com/ae5jjk.png
Why server? Why do I not have access to any of these areas?
Can anyone else verify if they have any of these things in their root directory?

I used Iolo to "clean" my hard drive, and now I can't access some websites, including facebook. How can I fix this? I get what looks like a root directory.

Since using Iolo yesterday, I can't bring up the full front page of some websites, including Bing. Bing is a grey, blank screen. Lumosity looks like part of a root directory. How can I fix this? I'm trying to use IE instead, and having problems with that, too, and I don't like it anyway.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Unknown variable or property name 'ReportFilePath'. Error accessing item 'Runstate.Root.Locals.ReportFilePath'. in TestStand

Hi all.
I was using Teststand 4.2 up to last week and upgraded to TS 2013. In 4.2 I was using the following to get the location of the teststand report:
Runstate.Root.Locals.ReportFilePath
but with TS 2013 this no longer works.. is the following error:
Unknown variable or property name 'ReportFilePath'.
Error accessing item 'Runstate.Root.Locals.ReportFilePath'. in TestStand - Get Property Value (String).vi->
I've tried the following now with no success:
RunState.Root.Report.Location
So my question is how can I get the location (path) of the report file during test programmatically please?
Please find enclosed a screenshot of the report config:
Solved!
Go to Solution.
Attachments:
TS_ReportConfig.png ‏42 KB

Shashidhar,
Thanks for your help! With your tips, I finally got it to work. For anyone else trying to modify report names based on user input after the sequential process model sets the file name path I will re tell what I did:
Edit the Ni_RerportGenerator.seq plugin found in C:\Program Files (x86)\National Instruments\TestStand 2014\Components\Models\ModelPlugins\
You go into this file and add the step higlighted in Blue at that same location. Please see the expression I typed in the expression box. Setting Parameters.ReportOptions.NewFileNameForEachUUTStatus to true forces re-evaluation of the report name at the end of the sequentialmodel.seq.
Then you add a FileGlobal in the sequenatialmodel.seq. I called my FileGlobal ReportFileName
Then I added an expression in my test sequence that modified the the new FileGlobal I created:
Finally I updated the report options (Go to Cofigure>Report Options > Report File Pathname and under File/Directory Options select "Specify Report File Path by Expression" and I entered my expression. It appears that you can disregard the evaluated report file path error (box below) because your pathname won't be generated until run-time.
This worked well for me hopefully it will for others.
Thanks,
Marco

Find The Txt Files in root directory

Iin Sql if we want to check a text fiile in root directory (D:\windows\commands\dil.txt) exists or not what is right way or right command for it
Thanks in Advance

Oracle beginner wrote:
utl_file.fgetattr('D:\windows\commands\', 'dil.txt', ex, flen, bsize);Wrong. Common mistake in thinking that the directory can be specified like that. It cannot. *+
Oracle does not allow direct access to server directories as this will be a security violation.
Instead, Oracle allows you to define a directory object that refers to a specific server directory. Once defined, read and write access on this object can be granted to schemas.
This then provides a security mechanism - requiring PL/SQL code to use a directory object and have access (read and/or write) to the object.
Secondly, it also support abstraction of the actual physical directory path. For example, the application code can use the directory object CSV_FILES - and the actual location can be implementation specific and differ from the mainframe Oracle server, to the Unix Oracle server to the Windows Oracle server.
Details on FGETATTR are in [Oracle® Database PL/SQL Packages and Types Reference|http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_file.htm#i1003488] guide.
* Please note that the old style utl_file_dir parameter has been discontinued in Oracle and its use is not recommended by Oracle and constitutes a pretty serious security violation if used.

WDTV Live has lost all content, Root Directory no longer showing on PC - HELP

Hi All, I disconnected my WDTV Live last night from my TV and connected directly to my router with a network cable. When I click on the WDTV under networks in my computer there is nothing there at all! no root folder, none of my files etc. I have tried dropping a new folder in there but it wont let me and the option to right click add new folder is not availble. When plugged back to the tv there is no file contents either, everything is gone. Please help, I'm runnning Windows 7, the WD still turns on, I have no files no root directory, NOTHING!

A co-worker of mine is having a very similar problem with her WD Media Hub. I was the one who helped her get it setup when she first purchased the media hub (a few years back) and so she came to me when she recently went to use it and it acted like as if there was no content on the thing at all. She brought me the device to work and i was able to get it connected to the network and access it via IE (using the web page at http://10.70.0.86:80/) but any attempt to connect directly via windows explorer fails. The hubs name is the default WDTVLiveHub and when I type in \\WDTVLIveHub\ in Windows Explorer it can’t find the device nor can I map a network drive to it. This is how we originally setup her media hub with content, using Windows Explore to copy a bunch of content. When I was able to access the device via IE at 10.70.0.86:80 I went to the System and selected Storage and in the drop down for device the drop down is blank with nothing to select. In the top right there as a red exclamation mark and when I selected it I got a warning saying the drive's was near capacity. This tells me the files are there but for some reason they can’t be accessed. I did a hard reset via the button on the bottom of the device but that did not fix the problem with accessing it via Windows Explorer. I told her to take it home and see if it will work for her when she hooks it up to her tv,.It’s definitely not a firmware update issue because she's not had it connected to the internet so any firmware update would have had to been done manually. Any feedback or troubleshooting suggestions is most welcome.

FinRep 9.3.1: All users getting error opening reports from root directory

We are having an irritating, although not missiion critical error
When a user (any user) attempts to open a report from the explorer view in Financial Reporting 9.3.1, we receive an "_Error 1000165"._ No explanation is provided. No folders are openable within the explorer view except "Personal Page."
It is possible to open reports by opening a report that got accidentally stored in the root directory and then opening another report from the menu system in the usual way. So it is not a user permissions/provisioning issue.
Is there a fix to this? I am afraid someone will clean out the root directory and then we won't be able to access our reports.
Update: I can use the pattern "VariancePercent([B(A)],[A(A)])" to cut this to 27 Columns by varying the direct reference to the column. But is there an easier way to do this?
Edited by: user10868938 on Feb 24, 2009 3:43 PM

We have been able to complete the update of our users SSID's in our Planning SQL tables through the utility. We had to create the users in Essbase first though.
However, if I try to log into Planning (through Workspace) I still cannot see the Planning applicaitons I should have access too. In Shared Services if I pull up my network ID and View Report, I do not get any Planning groups to show up that I belong too. I can open the group in HSS and see my ID is in it but when I do the View Report on my ID nothing comes up.
Additionally, if I add a user from scratch to the existing Planning groups that we've migrated and do the View Report they will show up for that user and the security passes through to Planning/Essbase so that I could log on fine. So, the problem is not with adding new users but the existing one's that were migrated. HSS shows the users in the groups but if you view a Report for those users it doesn't look like you belong to any groups.
We are going to apply a patch to Shared Services to see if it helps. It's suppose to deal with Groups that have users from multple domains but one set of those users cannot log into the application they should have access too. We applied this in our stand-alone S9 Essbase environment a couple of months ago to deal with a break between our existing users and groups from HSS to Essbase. Maybe this will be the final piece.

Import Error: The root directory does not exist

Hi,
I have some isuuses with importing the extended page. When I try to Import it throws an error.
Root Directory does not exist.
I am using the following command.
import c:\jdev\jdevhome\jdev\myprojects\oracle\apps\asn\opportunity\webui\EMCOpptyDetPG.xml -includeSubpackages -validate -rootdir c:\prabhat\Jdev\jdevhome\jdev\myprojects -mmddir C:\prabhat\Jdev\jdevhome\jdev\myhtml\OA_HTML\jrad -userId 1 -username apps -password apps -dbconnection "(description = (address_list = (address = (community = tcp.world)(protocol = tcp)(host =xxxx)(port =xxx)))(connect_data = (sid = xxxx)))" -jdk13
Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetP
G":
Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG":
Invalid value "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" for property
"Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubt
abPrmRN". Component "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" cannot
be referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabPr
mRN" because it violates scope restrictions.
Invalid value "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" for property "Exte
nds" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTas
kRN". Component "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" cannot be refere
nced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN" bec
ause it violates scope restrictions.
The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTable" of t
able style because it is inside "tableLayout".
The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTaskButtonR
N" of stackLayout style because it is inside "tableLayout".
Invalid value "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" for property
"Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmS
tack". Component "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" cannot be
referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmStack" b
ecause it violates scope restrictions.
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Import completed.
But After this when I try to see from the server there is no file with name EMCOpptyDetPG.xml exist. So I think this file is not imported.
Could suggest how to solve this problem.
Thanks
Prabhat

Hi Tapash
while deploying a page to mds Repository i m getting the same error that root Directory does not exist but it also says that import completed successfully.
when i see the same using jdr_utils.listDocuments('xxxx/oracle/apps/ak/server/webui/xxxPG')
it says printing /xxxx/oracle/apps/ak/server/webui/xxxPG thus page is available in the mds repository and i m able to access the page at run time
my concern is why i m getting this error
my import command looks like this
java oracle.jrad.tools.xml.importer.XMLImporter $JAVA_TOP/xxxx/oracle/apps/ak/server/webui/xxxxPG.xml -jdk13 -mmddir $OA_HTML/jrad -username apps -password apps -rootdir $JAVA_TOP -validate -dbconnection " (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xyxyxyxyxy)(PORT = xyxyx)) (CONNECT_DATA = (SID =yyy)))"
could u pls suggest some solution.

Import Error:Root Directory Does not exist

Hi,
I have some isuuses with importing the extended page. When I try to Import it throws an error.
Root Directory does not exist.
I am using the following command.
import c:\jdev\jdevhome\jdev\myprojects\oracle\apps\asn\opportunity\webui\EMCOpptyDetPG.xml -includeSubpackages -validate -rootdir c:\prabhat\Jdev\jdevhome\jdev\myprojects -mmddir C:\prabhat\Jdev\jdevhome\jdev\myhtml\OA_HTML\jrad -userId 1 -username apps -password apps -dbconnection "(description = (address_list = (address = (community = tcp.world)(protocol = tcp)(host =xxxx)(port =xxx)))(connect_data = (sid = xxxx)))" -jdk13
Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetP
G":
Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG":
Invalid value "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" for property
"Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubt
abPrmRN". Component "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" cannot
be referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabPr
mRN" because it violates scope restrictions.
Invalid value "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" for property "Exte
nds" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTas
kRN". Component "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" cannot be refere
nced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN" bec
ause it violates scope restrictions.
The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTable" of t
able style because it is inside "tableLayout".
The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTaskButtonR
N" of stackLayout style because it is inside "tableLayout".
Invalid value "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" for property
"Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmS
tack". Component "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" cannot be
referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmStack" b
ecause it violates scope restrictions.
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Import completed.
But After this when I try to see from the server there is no file with name EMCOpptyDetPG.xml exist. So I think this file is not imported.
Could suggest how to solve this problem.
Thanks
Prabhat

Hi Tapash
while deploying a page to mds Repository i m getting the same error that root Directory does not exist but it also says that import completed successfully.
when i see the same using jdr_utils.listDocuments('xxxx/oracle/apps/ak/server/webui/xxxPG')
it says printing /xxxx/oracle/apps/ak/server/webui/xxxPG thus page is available in the mds repository and i m able to access the page at run time
my concern is why i m getting this error
my import command looks like this
java oracle.jrad.tools.xml.importer.XMLImporter $JAVA_TOP/xxxx/oracle/apps/ak/server/webui/xxxxPG.xml -jdk13 -mmddir $OA_HTML/jrad -username apps -password apps -rootdir $JAVA_TOP -validate -dbconnection " (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xyxyxyxyxy)(PORT = xyxyx)) (CONNECT_DATA = (SID =yyy)))"
could u pls suggest some solution.

How do I get iWeb to publish just the files to my root directory

Hey all, when I publish my site to my hosting server via iWeb it's just copying the entire folder into my root directory instead of copying the files to the root directory. This is causing my site url to look like this: www.mysite.com/myfolder/ how do I get iWeb to publich the files in the "myfolder" to my server instead of the entire folder?

I needed to do this while keeping ftp publishing inside iWeb, and so I developed a sneaky solution. I just figured this out, so there may be some extra steps in here. Here goes:
Find the iWeb application on the computer you are publishing from.
Control-Click on the application and choose "Show Package Contents".
In the window that appears, open the folder "Contents".
Control-Click on the folder "Resources" and choose "Get Info".
In the window that appears, open the "Sharing and Permissions" drop-down.
Click the lock in the lower-right corner and enter your password.
Where it says "Read Only" across from "Everyone", click the arrows and choose "Read and Write".
Close the "Info" window and open the "Resources" folder.
Find the "defaultPublishConfiguration.plist" file and change the permissions (repeat steps 4-7 but with "defaultPublishConfiguration.plist" instead of the "Resources" folder).
Open the "defaultPublishConfiguration.plist" file in TextEdit.
Find the line "<string>/Web/Sites</string>".
Change it to "<string>/Web</string>".
Save and close the text file.
Restart iWeb.
Go to your publishing settings and enter the information for your server. Point the "Directory/Path" to the folder above your server's root web folder.
Set "Site Name" to the name of your server's web folder.
Make sure that none of the files in your server's web folder have the same name as those iWeb would upload.
Select File>Publish Entire Site.
It should now publish your site to "http://www.yourdomain.org/Home.html".
Hope it works!
mindoftea

How can I publish iWeb site in root directory in place of a prior site?

Hi there... I have created a family web site and published it to my .mac account. The problem is that I had previously published another site and that site remains in the 'root' directory of my account. Practically, this means that if anyone types in:
web.mac.com/[username]
... they will get my old site instead of the site i wish them to see... Is there any way I can move my new site so that typing the more simplified 'root' address (above) will bring up the site I wish for them to view?
Powerbook G4 Mac OS X (10.3.9)
Powerbook G4 Mac OS X (10.3.9)

Do you have both sites in iWeb together? If so, then simply look in the Site Organizer, select the site that you want to come up by the short URL and drag it to the top of the organizer. iWeb will make whatever site is at the top of the Site Organizer the default site. You should probably do a "Publish ALL to .Mac" after doing this so that all the files are in the right place. So once you do this you can access the default site with the short URL http://web.mac.com/yourname and then you can access the second site by using its URL directly... http://web.mac.com/yourname/iWeb/sitetwoname You could also provide links from site one to site two and vice versa to "link" the two sites together.

Perl modules are being installed to the wrong root directory

This is kind of a package, kind of an AUR question. I don't think it is the usual "upgrade to perl-5.20" issue; I've done lots of searching with no obvious mention of my issue.
I have downloaded the PKGBUILDs for perl-tk (in extra) and perl-pdl (in AUR). When I run makepkg on them, the resultant package has the wrong root directory. For example, perl-pdl tries to install into
/home/<username>/perl5/bin/
rather than
/usr/bin
and the libraries want to go into
/home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL
rather than something like
/usr/lib/perl5/vendor_perl/PDL
I don't think I'm doing anything unusual with the build. For perl-pdl, I download the tarball from the AUR and untar it in ~/tmp. Cd to ~/tmp/perl-pdl and then run makepkg. The start of the build process says:
==> Making package: perl-pdl 2.007-1 (Wed Jun 18 16:12:19 PDT 2014)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Found PDL-2.007.tar.gz
-> Found perldl.conf
==> Validating source files with md5sums...
PDL-2.007.tar.gz ... Passed
perldl.conf ... Passed
==> Extracting sources...
-> Extracting PDL-2.007.tar.gz with bsdtar
==> Removing existing pkg/ directory...
==> Starting build()...
INFORMATION: using file /home/<username>/tmp/perl-pdl/src/perldl.conf to set configuration defaults
Makefile.PL: Found required OpenGL version, setting USE_POGL => 1
Types.pm.PL: using typedef long PDL_Indx
Extracting Types.pm
making PDL_B...
making PDL_S...
making PDL_US...
making PDL_L...
making PDL_IND...
making PDL_LL...
making PDL_F...
making PDL_D...
Warning: prerequisite Astro::FITS::Header 0 not found.
Warning: prerequisite Convert::UU 0 not found.
Warning: prerequisite File::Map 0.57 not found.
Warning: prerequisite Module::Compile 0.23 not found.
Generating a Unix-style Makefile
Writing Makefile for PDL::pod
Generating a Unix-style Makefile
Writing Makefile for Inline
Writing MYMETA.yml and MYMETA.json
Generating a Unix-style Makefile
Writing Makefile for PDL::PP
Generating a Unix-style Makefile
Writing Makefile for PDL::NiceSlice
Writing MYMETA.yml and MYMETA.json
Basic/Core/Makefile.PL: got root build dir /home/<username>/tmp/perl-pdl/src/PDL-2.007
Basic/Core/Makefile.PL: adding /home/<usenname>/tmp/perl-pdl/src/PDL-2.007/inc
Trying to figure out POSIX threads support ...
Saw pthread.h. Fine.
Fine, your perl was linked against pthread library.
==> Will build PDL with POSIX thread support. Gifts to TJL :-)
and wraps up with
Installing /home/<username>/tmp/perl-pdl/pkg/perl-pdl/home/<username>/perl5/man/man3/PDL::Perldl2::NiceSlice.3pm
Installing /home/<username>/tmp/perl-pdl/pkg/perl-pdl/home/<username>/perl5/man/man3/PDL::Perldl2::PDLCommands.3pm
Installing /home/<username>/tmp/perl-pdl/pkg/perl-pdl/home/<username>/perl5/man/man3/PDL::Perldl2::PrintControl.3pm
Installing /home/<username>/tmp/perl-pdl/pkg/perl-pdl/home/<username>/perl5/man/man3/PDL::pdl2.3pm
Installing /home/<username>/tmp/perl-pdl/pkg/perl-pdl/home/<username>/perl5/bin/pdl2
Installing /home/<username>/tmp/perl-pdl/pkg/perl-pdl/home/<username>/perl5/bin/pptemplate
Installing /home/<username>/tmp/perl-pdl/pkg/perl-pdl/home/<username>/perl5/bin/perldl
Installing /home/<username>/tmp/perl-pdl/pkg/perl-pdl/home/<username>/perl5/bin/pdldoc
Appending installation info to /home/<username>/tmp/perl-pdl/pkg/perl-pdl/home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/perllocal.pod
==> Tidying install...
-> Purging unwanted files...
-> Removing libtool files...
-> Removing static library files...
-> Removing empty directories...
-> Compressing man and info pages...
-> Stripping unneeded symbols from binaries and libraries...
==> Creating package "perl-pdl"...
-> Generating .PKGINFO file...
-> Adding changelog file...
-> Generating .MTREE file...
-> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: perl-pdl 2.007-1 (Wed Jun 18 16:21:25 PDT 2014)
Excerpts of "pacman -Qlp perl-pdl-2.007-1-x86_64.pkg.tar.xz" look like
perl-pdl /home/
perl-pdl /home/<username>/
perl-pdl /home/<username>/perl5/
perl-pdl /home/<username>/perl5/bin/
perl-pdl /home/<username>/perl5/bin/pdl
perl-pdl /home/<username>/perl5/bin/pdl2
perl-pdl /home/<username>/perl5/bin/pdldoc
perl-pdl /home/<username>/perl5/bin/perldl
perl-pdl /home/<username>/perl5/bin/pptemplate
perl-pdl /home/<username>/perl5/lib/
perl-pdl /home/<username>/perl5/lib/perl5/
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/Inline/
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/Inline/MakePdlppInstallable.pm
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/Inline/Pdlpp.pmperl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL.pm
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL/
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL/AutoLoader.pm
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL/Bad.pm
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL/Basic.pm
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL/CallExt.pm
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL/Char.pm
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL/Complex.pm
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL/Compression.pm
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL/Config.pm
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL/Constants.pm
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL/Core.pm
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL/Core/
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL/Core/Dev.pmperl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL/Core/pdl.h
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL/Core/pdlcore.h
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/Bad/
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/Bad/Bad.so
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/CallExt/
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/CallExt/CallExt.so
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/Complex/
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/Complex/Complex.so
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/Compression/
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/Compression/Compression.so
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/Core/
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/Core/Core.so
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/FFT/
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/FFT/FFT.so
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/Fit/
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/Fit/Gaussian/
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/Fit/Gaussian/Gaussian.so
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/GIS/
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/GIS/Pr
perl-pdl /home/<username>/perl5/man/
perl-pdl /home/<username>/perl5/man/man1/
perl-pdl /home/<username>/perl5/man/man1/PDL::API.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::BadValues.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::Bugs.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::Course.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::Dataflow.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::Delta.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::FAQ.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::Indexing.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::Internals.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::MATLAB.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::Modules.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::Objects.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::PP-Inline.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::PP.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::ParallelCPU.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::Philosophy.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::QuickStart.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::Scilab.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::Threading.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::Tips.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::Tutorials.1p
perl-pdl /home/<username>/perl5/man/man1/pdl2.1p
perl-pdl /home/<username>/perl5/man/man1/pdldoc.1p
perl-pdl /home/<username>/perl5/man/man1/perldl.1p
perl-pdl /home/<username>/perl5/man/man1/pptemplate.1p
perl-pdl /home/<username>/perl5/man/man3/
perl-pdl /home/<username>/perl5/man/man3/PDL.3pm
perl-pdl /home/<username>/perl5/man/man3/PDL::AutoLoader.3pm
perl-pdl /home/<username>/perl5/man/man3/PDL::BAD2_demo.3pm
It seems like the $pkgdir variable is screwed up, but non-perl AUR packages have installed just fine. Any pointers? Thanks.

As usual I am probably too late to help. If you have local::lib installed and activated, it will override your destination directory when building packages. This is accomplished by setting environment variables. Joel hinted at this and you've seemed to fix them. Here is a decent list of them, mostly written by me I believe: https://wiki.archlinux.org/index.php/Pe … _variables
I've made tools that generate PKGBUILDs for perl modules and I always try to override these environment variables for just such an occasion. Entirely too much info on the subject is available at the wiki page above. Very few official PKGBUILDs will override these. Only the packages I used to maintain which retain my PKGBUILD will work for you. So... beware.

How do I set up a root directory for a web site

So this is probably a naive newbie question.
I have been creating websites driven by php/mysql on my mac for years using the previous the web preference pane to run Apache and since that went away using XAMPP to provide Apache/php/mysql functionality on localhost.
I decided to download OSX server and try to use that. Figured might as well go native MAC.
I am baffled.
The manual says to set up a web site in Server by working through the Websites Services interface. I did that and pointed the setup at the directory where I have all of my web site files. I now have no idea how to access that page from my local machine.
I have tried:
http://localhost/myURL
http://localhost/~username/Sites/[root file directory] -- where the files are stored
I also tried some typical localhost ip address
None access my site.
How do I access my site over my local netework?
I feel like just dumping server.app and stting things up through the terminal.
Thanks,
--Kenoli

How familiar are you with the bash command line and with Apache, and how much do you want to learn about Apache and related topics? (If you're not already, then I'd encourage learning about this material, as this knowledge is very useful for maintaining and updating sites, and knowledge of correctly securing files and directories is critical to building and maintaining secure web sites — all of managing and running and updating a web server builds on these foundations. There are various good books and web sites on Apache, and the Apache web site has various materials available, if you don't already have something.)
The localhost host name and the 127.0.0.1 IPv4 address are both synonyms for the "me" host. It's the name and the address that always gets you to the current host.
With http://localhost/ or http://127.0.0.1 specification, what you enter at the URL address bar is relative to the root directory specified for the default web server, and will default to the index.html or index.php page or whatever the default web site is configured to use. With OS X Server, this root directory is configured via Server.app. To use Server.app, launch it, connect to the server, select Websites from the left navigation, and you (by default) will see a default site and a secure site. Select the default site. Select the edit button below the site to edit (and to view) the configuration.
With the details of the default site visible, you will see the path to the default web directory. This path to the default web directory is where the files for the default web sever location reside.
The default path to the default web site is /Library/Server/Web/Data/Sites/Default
If you place foo.html in that directory (or whatever the defailt web site is using), you can view it via your web browser and the URLs:
http://127.0.0.1/foo.html
http://localhost/foo.html
To get to the default web site using the GUI, launch Finder and select Go To Folder, and enter that string into the box. You will now get a GUI view of that folder. (I'd strongly recommend using the command line here, and not the GUI. To get to the directory from the command line and then list the files present, launch Terminal.app from Applications > Utilities folder and issue the following commands:
cd /Library/Server/Web/Data/Sites/Default
ls
If you want to test something in the browser, you can use the file:///path-to-file-to-test mechanism. Most web browsers will allow you to render local files directly using file and three slashes.
You will need to ensure the executable files (scripts) are marked as executable to OS X, using a Terminal.app command such as the following:
chmod o+x path-to-file
Enabling ~/user per-user sites involves directly editing the configuration file, as Apple has disabled that by default.
There's an Apache tutorial with an overview of what's involved with enabling per-user directories here, and there's what's been listed in my earlier replies and links. With OS X Server Mavericks, the default configuration file for Apache is located in the Library folder, and can be viewed with the following Terminal.app command:
cat /library/server/web/config/apache2/httpd_server_app.conf
This file is the OS X Server equivalent of the oft-cited httpd.conf file you'll see listed in various documentation.
If you want to enable the per-user directories or tweak other Apache settings, then shut down Apache from Server.app or from the command line, and then edit the configuration file with nano or some other command-line editor using a command similar to this:
sudo nano /library/server/web/config/apache2/httpd_server_app.conf
you'll end up finding and uncommenting (removing the #) from the following two lines:
#LoadModule apple_userdir_module ${SERVER_INSTALL_PATH_PREFIX}/usr/libexec/apache2/mod_userdir_apple.so
#Include /private/etc/apache2/extra/httpd-userdir.conf
If you have specific questions about this, then I and others here can answer those. If you don't understand something, then asking a question about that can help you learn, and can help me understand what it is that I'm posting in my replies here that's confusing you. There are also various resources available for learning Apache, and I'd encourage spending a little time with those if you've not already done so or feeling at all unsure about how that tool works; I end up re-re-reviewing the Apache docs fairly regularly.

Problem in JAVA proxy scenario: cannot locate QSI root directory

Hi Frnds,
i am using RFC to JavaProxy, actually through java proxy we are connecting to the bank for payment.
And the bank has provided one payment client application which needs to be installed on the server for interacting with the bank,
and we had installed the payment client on to the server. But we are getting following type of error in the response,
SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Error invoking method egateJavaMsgIntInOutJava of proxy bean $Proxy258: cannot locate QSI root directory: com.sap.aii.proxy.xiruntime.core.XmlInboundException: Error invoking method egateJavaMsgIntInOutJava of proxy bean $Proxy258: cannot locate QSI root directory</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
What could be the possible solution in order to solve this error.
Thanks,
Raj
Edited by: RajSrivastava on Jul 8, 2009 11:03 AM

Hi Madhav,
Please check the following links regarding to u rproblem.
Java Proxy Server: cannot locate proxy bean...
Cannot locate proxy bean IN RWB
https://forums.sdn.sap.com/click.jspa?searchID=11113489&messageID=3039952
warm regards
mahesh.

Setting up the class root directory and choosing class files.

I made a simple test application as it is proposed at the J2EE 1.4 Tutorial and all worked.
(Chapter 24 Getting started with Enterprise Beans)
Than I deleted the ear file to try out the deploy mechanism again.
And after generating the new application with File-> New application which worked well I also
tried to use the EJB Wizard feature of the J2EE deployment tool. After I had selected the appropriate EJB classes to add to my jar, I clicked NEXT and I got the following message:
The class (converter.Converter) could not be loaded:
Please consult online help for assistance in setting up the class root directory and choosing class files.
The online helps isnt very usefull for this type of problem.
Do you have a hint what to do ?

Hi san-deepu,
I couldn't reproduce the error you are having when I followed Ch. 24 tutorial in packaging the ear. Is there anymore information in deploytool's logfile? This is in <user_home>/.deploytool/logfile, or you can run in verbose mode: <as_install>/bin/deploytool -v
When you say you deleted the ear file, did you also close the ear file in deploytool first? You may also want to exit deploytool () , and try deleting the temporary files. Deploytool usually cleans up the temp files automatically upon exit - maybe there are some left behind that it couldn't delete. On windows the temporary files are located by default in C:\Documents and Settings\Administrator\Local Settings\Temp\sun-dt-Administrator. In deploytool go to Edit --> Preferences --> General to find what the temporary directory is set to.
Which version of the appserver are you using? jdk version? operating system?
J

Bank Holiday Blues - Access package in root directory..

Similar Messages

Maybe you are looking for