Banking Services 5.0 Problem with BCA_ACC_MST_RUN

Hi,
I want to run the report BCA_ACC_MST_RUN within Banking Services 5.0 to transfer the contract data of a loan to FI-CA System (ERP 2005).The report runs, but does not grap newly created contracts and transfer them to Open Item Management system. I would appreciate an idea how to solve the problem.
Thanks, Christina

Hi Christina!!!
I am working in the communication between Deposits Management System and the ERP Systems (Loans, FI, CO)...
Do you have a installation guides or notes to solve it? Could you reply this thread with the url or number of the notes?
Please, I can not found anything to do it.
Thanks

Similar Messages

How can i view Service outage/fault problems with ...

I have been driving my self nuts going around and around the BT site trying to find a link to Service outage/fault problems with Broadband in my area.
Any ideas!!!
Mike
Solved!
Go to Solution.

http://usertools.plus.net/exchanges/mso.php
http://usertools.plus.net/exchanges/?
http://btbusiness.custhelp.com/app/service_status
http://bt.custhelp.com/app/answers/detail/a_id/15036
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Crystal 11 - Latest Service Pack loaded - problem with Kyocera printer

Post Author: sorrock
CA Forum: Integrated Solutions
Hi
We are using Crystal 11 Report Writer, and Sage ACCPAC. Since Upgrading our ACCPAC all the crystal reports that ACCPAC utilises are coming up as garbage on the preview screen. I have ruled out a sage issue by opening crystal directly and opening the respective report, the garbage still appears, if I change the printer that it is set to then the report appears fine.
The printer is a Kyocera - fs-c8026n the driver is a Kyocera Mita extended Driver.
Any other printer is fine - so I am looking for anyone who has had problems with a Kyocera printing garbage.
I have loaded the latest service pack for Crystal.
Can anyone please help - apologies if I have put this on the incorrect forum
Thanks
Stacey

Hi Jim,
You can upgrade to CR XI R2 for free by downlaoding the trial version, install using your XI keycode and then getting a keycode for XI R2 to enable all features.
Or to upgrade XI only then install the latest service pack will bring you up to date.
Thank you
Don

Apps like Bank of America have Problems with iOS 7

When I upgraded to iOS7, I started having problems logging into certain apps that required a password. Apps like Bank of America, Etrade and Starbucks were all giving me a problem. I am sure other apps exist that may exhibit similar problems. I called Apple Support and they said other people were having similar problems. I thought I should post this so other folks experiencing the same issues may find this helpful. The solution that Apple Support gave me was to reset my iPhone, which is a real headache.
I finally figured out how to fix the problem. You have to set Safari to accept cookies. Once I did this I was able to log in successfuly to all of these apps.
Go to Settings > Safari. Look for a feature called Block Cookies in the Privacy & Security section. Set the Block Cookies option to "Never."
Once you do this, make sure to double click the home button and close the apps so they are not running in the background anymore. You don't have to close all the running apps. Just close the ones with which you were having a problem. You just double click the home button and flick the apps in the up direction to get rid of them.
Once you are sure the apps are not running in the background, try logging in again. With the Block Cookies option set to "Never," the apps should allow you to log in successfuly.
Hope this works.

Pezelias - thank you. Fixed my problem with my Starbucks app.
As an FYI, I had previously called Starbucks support and they are aware of the issue. Apparently an update / fix is in the works but the timing is uncertain.

Cannot open any e-mails using Firefox. Has ATT service. No problems with other web sites.

I have used internet explorer and had no problems opening my e-mails. When I access my e-mail which is provided by AT&T using firefox, my entire e-mail is frozen. I am using att.net mail beta or Yahoo mail beta. What can I do to resolve the problem, I do not like using internet explorer. It was working when I switched from basic att mail to the new bata for the last few weeks then all of a sudden it would freeze when I access my e-mail.

Hi,
Thank you for your post.
I'm trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thanks & Regards,
Emir
Emir Liu
TechNet Community Support

Web Services Activity Insert problem with linking to child contact records

Hi - I am trying to use WS 2.0 to insert a new activity and link it to a list of contacts. I have converted this from WS 1.0. It works fine without the contact linking code but fails with the following message when linking to the contact records...
Update operation on integration component 'Activity' failed because no matching record in business component 'Action' with search specification '[Description] = "Test2"' could be found.(SBL-EAI-04403)
Here is a simplified version of the code in question...
activity2.Activity act = new activity2.Activity();
act.Url = cs.crmSessionUrl;
activity2.ActivityInsert_Input input = new activity2.ActivityInsert_Input();
input.ListOfActivity = new activity2.ListOfActivityData();
input.ListOfActivity.Activity = new activity2.ActivityData[1];
input.ListOfActivity.Activity[0] = new activity2.ActivityData();
input.ListOfActivity.Activity[0].Subject = "Test2";
input.ListOfActivity.Activity[0].Activity = "Task";
input.ListOfActivity.Activity[0].Status = "Completed";
input.ListOfActivity.Activity[0].Type = "Email";
input.ListOfActivity.Activity[0].DueDate = DateTime.Parse( DateTime.Now.ToString("M/d/yyyy HH:mm:ss"));
input.ListOfActivity.Activity[0].AccountId = "AEGA-BGV8Z9";
input.ListOfActivity.Activity[0].ListOfContact = new activity2.ListOfContactData();
input.ListOfActivity.Activity[0].ListOfContact.Contact = new activity2.ContactData[1];
input.ListOfActivity.Activity[0].ListOfContact.Contact[0] = new activity2.ContactData();
input.ListOfActivity.Activity[0].ListOfContact.Contact[0].Id = "AEGA-CCMEWM";
activity2.ActivityInsert_Output output = act.ActivityInsert(input);
Any suggestions would be great!

Try using execute instead.
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:ns="urn:crmondemand/ws/ecbs/activity/10/2004"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"
xmlns:data="urn:/crmondemand/xml/Activity/Data">
<soapenv:Header>
<wsse:Security>
<wsse:UsernameToken>
<wsse:Username>yourusername</wsse:Username>
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">yourpassword</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
</soapenv:Header>
<soapenv:Body>
<ns:ActivityExecute_Input>
<data:ListOfActivity lastpage="?" recordcount="?">
<data:Activity operation="insert">
<Subject>Test7</Subject>
<AccountId>AALA-5KC0OV</AccountId>
<Type>Email</Type>
<Status>Completed</Status>
<Activity>Task</Activity>
<data:ListOfContact>
<data:Contact >
<data:Id>AALA-5851K0</data:Id>
</data:Contact>
</data:ListOfContact>
</data:Activity>
</data:ListOfActivity>
</ns:ActivityExecute_Input>
</soapenv:Body>
</soapenv:Envelope>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<SOAP-ENV:Body>
<ns:ActivityExecute_Output xmlns:ns="urn:crmondemand/ws/ecbs/activity/10/2004">
<ListOfActivity xmlns="urn:/crmondemand/xml/Activity/Data">
<Activity>
<ModifiedDate>2012-06-07T01:00:09Z</ModifiedDate>
<CreatedDate>2012-06-07T01:00:09Z</CreatedDate>
<ModifiedById>AALA-583LBZ</ModifiedById>
<CreatedById>AALA-583LBZ</CreatedById>
<ModId>1</ModId>
<Id>AALA-5TG95O</Id>
<CreatedBy>Web Services Administrator, 06/06/2012 18:00:09</CreatedBy>
<ModifiedBy>Web Services Administrator, 06/06/2012 18:00:09</ModifiedBy>
<ListOfContact>
<Contact>
<ModifiedDate>2012-03-19T20:19:55Z</ModifiedDate>
<CreatedDate>2012-03-05T21:43:14Z</CreatedDate>
<ModifiedById>AALA-583LBZ</ModifiedById>
<CreatedById>AALA-583LBZ</CreatedById>
<ModId>79</ModId>
<Id>AALA-5851K0</Id>
<CreatedBy>Web Services Administrator, 03/05/2012 13:43:14</CreatedBy>
<ModifiedBy>Web Services Administrator, 03/05/2012 13:43:14</ModifiedBy>
</Contact>
</ListOfContact>
</Activity>
</ListOfActivity>
</ns:ActivityExecute_Output>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>

Safari (4.0.3) problem with internet banking

i upgraded my macbook to snow leopard 10.6.1. my internet banking services do not work properly as previous operating system (leopard). the problem is the dragging menu shows nothing so i could not see list of my accounts. pls see attached picture http://rapidshare.com/files/301549072/banking_web.jpg.html.
Please help. i tried firefox with same problem.
thanks

Some banks are notoriously uncaring and lazy about what systems and browsers they support.
Try reading these threads:
http://discussions.apple.com/thread.jspa?threadID=1893522&tstart=0
http://discussions.apple.com/thread.jspa?threadID=1831414&tstart=175
http://discussions.apple.com/thread.jspa?threadID=1828195&tstart=200
As it says in this document:
http://developer.apple.com/internet/safari/
"Safari complies with standards, but not all browsers do. This article explains how to design, modify and validate your website so that it can be rendered and read properly by all major browsers."
The bank/s need to read this:
"Safari is one of the most standards-compliant browsers ever built. Thus, your best bet for ensuring your pages render properly in Safari — today’s version and beyond — is to follow web standards. For a great overview of web standards, check out Mozilla.org’s article Using Web Standards in Your Web Pages."

Problem with change bank information on ESS

Dear All,
I have a problem with the bank details, like when the user is changing the bank details, its throwing an error " Bank key value begda endda has a grouping value of "01" instead of "" ".
Thanks
Yogesh

Yogesh,
RPUFIXDS should solve the mostly inconsistencies (PSHRD-GPRVL field)
RPUFACEVIEKN align the field VIEKN to the feature IVWID for the ESS service
RPUFACECPRFN adjust T582G from T582A-CPRFN
If your refer to CCURE PC_UI indicator in T77S0, you should activate it only if you're using concurrent employment
Look for N06_BB_ConfigGuide_EN_US.doc ([link|http://help.sap.com/bp_hcmv1600/BBLibrary/Documentation/N06_BB_ConfigGuide_EN_US.doc]), and read 2.3.7.5 Removing Inconsistencies in Employee Data for a full explanation about this issue.
Consider this is a common issue, so you'll find more information in older posts in this forum, with a lot of answers from SAP experienced Consultants.
Best regards!

Having problems with login with bank today. Then...

Well my bank just listed a warning on their site that those customers with FF are having problems logging in. I still tried and yep I can't login either. Also last week when I was on Lee's jean site and looking at pants not all the offerings were show on the page since I was talking with customer service rep. I had no idea it was not pulling up everything. So I have no error message to tell me when FF is not doing it's job. This concerns me since I have no way of knowing if I am getting entire search results using FF. Now my bank is having problems with your browser. So I am resorting to Chrome for now. I like the idea of FF and all but when it impacts so many important abilities online I really can't justify using FF. I know you all are doing your best but I also have to do my best too and using FF is not going to get me the best results right now. Have no idea what is going on. I also just clicked the check our browser on your site to see if I needed updates and what it did instead is it took out all addons and well that was another reason I am not sure what is going on here at FF. I also have been having crash problems with Adobe Flash too with browser off and on for months and I just keep reporting it but it still keeps cropping up. I think maybe it also has something to do with FF. Any addons I have had I installed from your website and I didn't have much at all in addons either. Pinterest is the only one I can think of. I also have problems with my browser locking up like for watching videos online and maybe that has to do with Adobe Flash??? I have no idea and so many things have been glitchy off and on with browser that I am tired of it all and need to find better alternative. Thanks and good luck : (

No I don't feel quiet sure about posting the screen shots of my bank here. But it is Columbia Bank in Washington State that has a warning to their customers who are using FF. "A recent update to Firefox is creating access problems for some customers in Personal Online Banking. We are working on a resolution as quickly as possible. If you are experiencing difficulty accessing Personal Online Banking while using FF we recommend accessing from a different browser until the issue has been resolved. "
When I click and try it anyways I get:
"Secure Connection Failed to web9.secureinternetbank.com It was interrupted while the page was loading. The page you are trying to view cannot be shown because the authenticity of the received data could not be verified. Please contact the website owners to inform of this problem."
I switched to Chrome this morning and I was able to access bank account no problem. I also went to daily mail and usually my computer gets whiny with all the ads that load up and none of them loaded with Chrome it was way better.
Watched a video and no problems. I appreciate the suggestion to Sea Monkey but I have done that browser before. I forget why I left SM long time ago but had to be a good reason. IF FF is not that well supported then I would seriously doubt that SM would be any better. I have too much to do to play tech detective on this or that. I don't care for Google docs since so limited on what you can do with those programs and don't like how invasive it is but I am strapped for time and can't wait for open source to catch up. I have waited so many years and I have pretty much given up. When my desktops give out I may even consider Apple at this point which I NEVER thought I would do.

Remote Delta link setup problem with Bean / Access Service

Hello,
I am trying to setup Remote Delta Link (RDL) between two portals. (Both portals same version - EP 7.0 EHP1 SP 05 - are in the same domain)
I already have the Remote Role Assignment working without any issues.
The following have been done successfully:
1. Same user repository has been setup for both the portals
2. Setup trust between producer and consumer (SSO working fine)
3. Producer added and registered succesfully on consumer
4. Permissions setup on producer and consumer
4. pcd_service user with required UME actions setup
I am able to see all the remote content in the Consumer portal.
When I try to copy the remote content and paste it as local content, I am getting the following error:
Could not create remote delta link to object 'page id'. Could not connect to the remote portal. The remote portal may be down, there may be a network problem, or your connection settings to the remote portal may be configured incorrectly.
After increasing the log severity, I am able to see the following in Default Trace:
com.sap.portal.fpn.transport.Trying to lookup access service (P4-RMI) for connecting to producer 'ess_int' with information: com.sap.portal.fpn.remote.AccessServiceInformation@31c92207[connectionURL=hostname.mycompany.com:50004, shouldUseSSL=false, RemoteName=AccessService]
com.sap.portal.fpn.transport.Unable to lookup access service (P4-RMI) with information: com.sap.portal.fpn.remote.AccessServiceInformation@31c92207[connectionURL=hostname.mycompany.com:50004, shouldUseSSL=false, RemoteName=AccessService]
AbstractAdvancedOperation.handleDirOperationException
[EXCEPTION]
com.sap.portal.pcm.admin.exceptions.DirOperationFailedException: Could not retrieve the bean / access service to connect with producer
Could not retrieve the bean / access service to connect with producer
Like you can see above, there is some bean / access service which is not retrieved successfully. I am not sure if this is a permission problem on the consumer.
I have checked that the P4 ports are configured correctly (standard - not changed) and I am able to telnet from producer to consumer (and vice versa) on the P4 port.
I am stuck at this point and am not able to find any information on this.
I would really appreciate if some one can point me in the right direction.
Thank you for reading.
- Raj

Hi Raj,
Please check your config of the P4 port on the producer. Is it really 50004 (check SystemInfo of the producer)?
I do think there's a problem with the P4 communication since RDL requires P4 connection.
Do you have load balanced consumer-producer connection? Please refer to this blog for further details
Little known ways to create a load balanced Consumer Producer connection in a FPN scenario
Regards,
Dao

Problems with Customer Service AND unexplained charges!

I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
Does anyone have these reoccuring problems!?

I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
"they should" does not help my bill with the extra armount of charges.

Problems with Target service agreement

Problems with Target service agreement to repair my ipod nano. I have gone to the BBB. Who can I contact at Apple to let them know the poor service that Target gave with a Apple product?

Apple Customer Relations (800) 767-2775

Problems with Comodo Kill Switch, Windows Services & Bitlocker Encryption on Asus N56VZ

Hi All,
So recently I found myself stuck in a different scenario than before, and after many hours researching and efforts to fix this I still find myself stuck yet with a few options still to fix.
What is the problem?
So as a security cautious user when i first got to Windows 8.1 Pro 64Bit I encrypted both the C and D drive (Split the main disk) to protect myself and my family. Unfortunately that has not been very helpful with the way in which booting and running from
either external USB devices or CD/DVD works, not allowing myself to at all.
My usual security suit I use is Comodo Internet Security, which additionally comes with Comodo Kill Switch. Whilst using the application instead of stopping one of the TCP connections I was meant to I accidently stopped an Windows Explorer connection.
For some reason since then Windows Explorer, nor most windows apps or services themselves will run. For example msconfig will run but sfc /scannow or mmc will not, whether in safe mode or normal mode.
What Caused the Problem?
Cannot 100% say
What I Think Caused the Problem?
Myself running Comodo Kill Switch stopping a vital server connection with Windows Explorer that messed up alot. Or a potential Virus unknown how cannot fully scan system as wont boot externally or run many apps.
Additional Info
Asus Webcam is Disabled on Purpose
Laptop was fully customized to run latest games full graphics minus Anti Aliasing, works with Evolve + CoD Advanced Warfare
Laptop does not boot if USB Keyboard plugged in, works with everything else normal (had this on other systems no problem for me)
Ask me for more info if required to add here, braindead again
Specifications of my system
Intel® Core™ i7 3610QM Processor
Windows 8.1 Pro 64Bit
Intel® HM76 Chipset
DDR3 1600 MHz SDRAM, 2 x SO-DIMM 8GB
15.6" HD (1366x768)/Full HD (1920x1080)/Wide View Angle LED Backlight
NVIDIA® GeForce® GT 650M with 2GB DDR3 VRAM
1TB 5400RPM OR 750GB 5400/7200RPM (Cannot remember off top of head, braindead)
Super-Multi DVD
Kensington lock (Security Feature)
LoJack (Security Feature)
BIOS Booting User Password Protection (Security Feature)
HDD User Password Protection and Security (Security Feature)
Pre-OS Authentication by programmable key code (Security Feature)
What Can Run and Won't Run?
ON BOOT:
Bitlocker Encryption Password & Advanced Settings are accessible
Bios (password protected) is accessible
Windows Recovery Mode is accessible (Think it is F9 or F10)
Windows Logon Password Screen is accessible
ON NORMAL/SAFE-MODE START UP:
After Log-In Windows Explorer will not run
Task Manager will run, also allows me to browse the files when trying to start new task
Can run Command prompt
Cannot run any control panel items
Cannot run services.msc
Cannot run mmc
Cannot run sfc
Every time it metions windows drive is locked
Start Error's when running certain applications (Will post codes soon)
Rufus USB Tool does run
Cannot boot Kali Linux off USB
Cannot boot Windows 8.1 off USB
Cannot boot Windows 8.1 off DVDRW
Fixwin2 will not run
Apps either work or don't whether in safe mode or normal
Cannot use Windows Installer
What Fixes I Have Tried So Far
Ok so like any normal user I don't want to lose my files. So here are what I have tried so far:
Repair MBR (Repair Completed, No Luck)
SFC /SCANNOW (Returns Error 'Windows Resource Protection could not start the repair service')
Tried sfc /SCANNOW /OFFBOOTDIR=c:\ /OFFWINDIR=c:\windows (Could not access drive)
Fixwin2 (Will not run in either normal or safe mode)
Booting using Windows 8.1 via USB (Cannot boot from extermal devices due to Bitlocker Encryption)
Booting using Kali Linux Via DVD & USB (Cannot boot from external devices due to Bitlocker Encrytption)
How do I know it is because of Bitlocker, because last time I disabled it, I could run from external devices
Tried to run bitlocker to change settings (Will not run)
Have used both password and recovery keys to unlock driver, they work but when applications are running on windows the drive is still locked?
Tried windows Automatic Diagnostic and Repair (Could not repair anything, did make a log I am still to extract from the syste)
There are No System Restore Points
I'm sure there is much more information I could post however I will leave it on an ask to know basis, apart from the log files and further information to gather. Below is my list of trial and error fixes to try for today (need more ideas and help please!):
Hiren's 15.2 Boot CD via DVD (NOT ABLE TO BOOT)
Hiren's 15.2 Boot CD via USB (NOT ABLE TO BOOT)
Research into the Bios and Possible Update in-case of implementation of Virus, can access flash utility (STILL NOT TESTED)
Try and get a portable version or a working version of windows installer to try and re-install Comodo Internet Security (STILL NOT TESTED)
Another way to disable Bitlocker
Anti-Malware / Anti-Virus Scan If Possible to Run One
Bitlocker Repair Tool, will try this also
I have posted this as have not found much info online, usually find it and crack on but this time things are a little more tricky, my priority task I really need to do is remove the Bitlocker Encryption, but if the application will not run... what do I do
then?
Thanks for your time reading all, Sorry for any poor formatting or spelling.
Update 1: MMC.exe Error Code
Ok so now have the computer in safe mode, still same as before, no explorer.exe, no services etc... Just went into the Task Manager > Services (Tab) > Open Services (Option at bottom)
This is the error I get:
'The Instruction at 0x785a746c referenced memory at 0x000000a8. The memory could not be read.
Any Ideas on what this error is and why?
Update 2: CHKDSK Works with no Fix
Update 3: Hiren's 15.2 Boot CD - USB Boot still no luck booting around Bitlocker Encryption
Just to explain again, I already have unlocked the drive with correct bitlocker password or recovery key yet the drive remains locked not allowing windows refresh of files of complete install from the windows recovery menu as keeps saying drive is locked

Ok so attempt number two to write this update via bloody phone! (Just refreshed page whilst writing!)
Update 4:
Problem - cannot run from bootable devices (DVD/USB)
Cause - bitlocker fully encrypted drive stops this working
Repair - Boot up holding F9 to enter windows recovery Input Bitlocker recovery keys to unlock drives
Navigate to Command Prompt in advanced settings Execute following code:
Repair-bde c: d: -rp 000111-222333-444555-etc...
(Code found from https://technet.microsoft.com/en-us/library/ee523219%28v=ws.10%29.aspx)
Note for those using this: It is common while unlocking certain drives to get errors such as: Quote from http://www.benjaminathawes.com/2013/03/17/resolving-partial-encryption-problems-with-bitlocker/
"LOG INFO: 0x0000002aValid metadata at offset 8832512000 found at scan level
1.LOG INFO: 0x0000002b Successfully created repair context.
LOG ERROR: 0xc0000037 Failed to read sector at offset 9211592704.
(0×00000017) LOG ERROR: 0xc0000037 Failed to read sector at offset 9211593216.
(0×00000017) …followed by around 20 similar entries that differed only by the offset value"
Repair Status for Update 4: COMPLETED - However over wrote D drive data so now need to recover that
Problem 2 - windows services corrupted along with windows files
Cause - Unknown
Repair - wait until system is fully decrypted Once fully decrypted ensure boot from USB/DVD
Re-do fixes that would not work before if this has fixed boot issue Confirm fix / update post Hope anything I put here helps others also

The problem with ALAssetsLibrary and Location Services

I have developed a photo app for the iPhone, released a couple of days ago, that's doing rather good in the App Store, but would probably do a lot better if it weren't for the negative reviews saying that they can't understand why the app wants access to Location Services to be able to select photos from the photo gallery.
The app lets users select photos from their gallery, which they then can style and edit in different ways. To do this I use the ALAssetsLibrary class. So far so good. The problem with the ALAssetsLibrary class is that if I wish to use it to access photos on the device, the user must give the app access to Location Services, as well. Why, you ask? Well, because photos in the gallery might possibly include information on when and where the photo was taken. If the user doesn't give the app access to Location Services, the app won't be able to access the photos at all.
In my app I'm not interested in the location services data at all - I just want the user to be able to select photos. But as far as I know there is just no way to read photos without Location Services enabled. As a developer I can sort of buy this limitation - because I understand why it exists - but apparently my users can not. And as a user myself I have to agree with them. Why on earth do they/I have to allow the app to access Location services for me to be able to select photos? It doesn't make sense!
At the moment I'm getting a lot of negative reviews saying "I downloaded and deleted. The app wants access to Location Services when I try to select a photo. This seems fishy. Don't download it". I agree. It DOES seem fishy, but I couldn't care less about their location data, and although I try to inform the user about this in the app, a lot of people doesn't seem to care, or understand why this is the way it is.
So, what's the point of this rant? Well, to start with, wouldn't it be better if iOS asked something like "This app needs access to your photos" instead of "This app needs access to your location", when using the ALAssetsLibrary?
Also, instead of using the ALAssetsLibrary I could have used the UIImagePickerController - if only it had supported landscape orientation. Why, why, WHY doesn't it? My app is landscape only, and therefore I had to build my own image picker functionality, instead of using the default one. Portrait only is a very stupid limitation, if you ask me.
Finally, is there SOME way at all to access the photos on the device without requiring Location Services as well?
Thank you for listening,
Andreas Lindahl
Rodskagg

Unfortunately, there is no way to directly access the photo library without prompting the user for Location Services permission. I just posted an article on my blog about this very issue (and referenced your post): http://blog.mikeswanson.com/post/18269837647/location-services. I hope that this situation can be improved in a future release of iOS.

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open. I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank you

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

Banking Services 5.0 Problem with BCA_ACC_MST_RUN

Similar Messages

Maybe you are looking for