BAPI BAPI_ALM_ORDER_MAINTAIN is not updating data

Hi Experts,
i am facing a problem in using 'BAPI_ALM_ORDER_MAINTAIN' objective is to use this FM for inserting an operation activity or updating description of exisitng operation for one of service order.
at the end of execution it does not give any error message. this is what i get after execution: 085 Order 4000060 saved with notification 300000000 ; but actual data is not getting updated in system.
current verison of system is ECC 6.0. this is what i am passing to this FM
IT_METHODS
000001 HEADER                           CHANGE                           000004000060
000001 OPERATION                        CHANGE                           0000040000600030
000001                                  SAVE                             000004000060
IT_HEADER
ORDERID
4000060
IT_OPERATION
ACTI                             DESCRIPTION
0030                                 TEST-TEST
IT_OPERATION_UP
D
X
I have tried without passing order data to this function module too, please help
regards
Subhash
Edited by: subhash soni on Aug 18, 2008 2:00 PM

Found a solution, was not executing bapi_transaction_commit at the end of execution

Similar Messages

Sale Order change BAPI - Storage loc not updated

Hi Everybody,
Iam using "BAPI_SALESORDER_CHANGE", to change the sale order items.
First iam calling above bapi with switch B, for new pricing & then second time for material change.
When i change any material number, it is getting updated correctly.
But the storage location, even though iam passing in the bapi it is not updated, & is blank - updation flag is also passed.
When i execute sale order change again it is updated - ie, for any material change for first bapi call, storage loc is not updated - for 2nd bapi call storage loc is updation - for same input in both the cases.
Is there any way to update the storage loc is first call of sales order change bapi.
Below is the parameters iam passing in bapi :
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
    EXPORTING
      SALESDOCUMENT      = LS_SALESDOCUMENT
      ORDER_HEADER_IN    = LT_HEADER_IN
      ORDER_HEADER_INX   = LT_HEADER_X
    TABLES
      RETURN                            = LT_RETURN
      ORDER_ITEM_IN               = LT_ITEMS
      ORDER_ITEM_INX             = LT_ITEM_X
      ORDER_CFGS_REF          = LT_CFGS_REF
      ORDER_CFGS_INST         = LT_PARTS
      ORDER_CFGS_VALUE     = LT_VALUES
      ORDER_CFGS_BLOB        = LT_CUBLOB
      ORDER_CFGS_VK            = LT_CUVK
      ORDER_CFGS_REFINST   = LT_CUREF
      SCHEDULE_LINES            = LT_SCHEDULE_L
      SCHEDULE_LINESX         = LT_SCHEDULE_X
      ORDER_TEXT                   = LT_TEXT
      CONDITIONS_IN                = LT_CONDITION_L
      CONDITIONS_INX              = LT_CONDITION_X.
Any help is appreciated.
Regards,
Nagarajan.J

Hi,
Storage location is updated only when same sale order bapi is called another time with required details.
rgs,
Nagarajan J

Background job not updating data for some steps of program

We have created a custom program and submitting the standard program RPRCCC_READ_KR1025
which is used for conversion of AMEX credit card files.
Since this program can update data for 1 company id at a time,we have created a background job
for that program with 10 steps and 10 variants of data related to 10 different company codes.
when this job is executed it is not updating data for all the 10 files , sometimes it updates 5,7,etc...
If we execute the other files which didnt update in job manually they are getting updated.
All the files executed with that program can be seen in PRTA transaction.
Regards,
Gautham.
Edit: Solved.
Since the standard program updates the database every time with commit work
there should be some time until the next database update,so we can use wait command
after the submit statement which will do the trick.
Edited by: Gautham Vangaveti on Aug 5, 2010 7:20 PM

Hi,
I mean B(Sub Assembly)
Item Rollup Flag
A No
--B Yes
---B1 No
---B2 No
---B3 No
--C Yes
In this case when we run cost rollup by giving item A, Oracle will consider below structure.
A
--C
Regards,
Sarvottam.

GL Posting using BAPI BAPI_ACC_DOCUMENT_POST but not updating in table BSEG

Hi Experts,
Hope all are doing greatu2026
I need you help to resolve the below issue.
We have on Z-Tcode to GL Posting the document using BAPI u2018BAPI_ACC_DOCUMENT_POST' and this program is successfully posted from the source file and documnet # also created successully.
We have entries in BKPF, but the table BSEG not updating and we do not have entries.
Please help me on this regards,
Thanks in Advance.
Amjad

Hi Srikant,
Thanks for your reply...
As you suggest, i have checked the structure ACCOUNTGL and below values are passing.
ACCOUNTGL -ITEMNO_ACC
ACCOUNTGL -GL_ACCOUNT
ACCOUNTGL- ITEM_TEXT
ACCOUNTGL- COMP_CODE
ACCOUNTGL- COSTCENTER
ACCOUNTGL- CS_TRANS_T
Could you please suggest me if there are any changes needs to do.
Thanks & Regards,
Amjad Hussain

Dataguard - logical standby - need help - not updating data at commit

Hi
Need help ?
We have logical standby setup where data is not updated at standby when committed at Primary. It only updates when alter system swith logfile.
On Primary:
log_archive_dest_2='service=xxStandby LGWR ASYNC valid_for=(online_logfiles,primary_role) db_unique_name=xxStandby'
On Standby:
we have already created standby redo logs ( 1+ # redo logs)
we used ALTER DATABASE START LOGICAL STANDBY APPLY IMMEDIATE NODELAY;
The data only ships when we do the ALTER SYSTEM SWITCH LOGFILE whereas it should so when data is commited on the primary.
Is there anything we are missing or need attention.
Please help
Thanks you so much

Yes, I have standby redo logs = ( 1 + # redo logs on the primary) and are of same size.
I also changed the log_archive_dest_2 setting for valid_for to ALL_LOGFILES, but the performance is still very slow... we are now overr 9 hrs behind the primary.
log_archive_dest_2='service=xxStandby LGWR ASYNC valid_for=(ALL_LOGFILES,primary_role) db_unique_name=xxStandby'
The Logical standby performance reallly not good at all. trying to increase sga/pga more ... hoping this will speed up some
Paul

OPC Server does not update data value

Hello,
I have a problem with a program that uses an OPC server to comunicate with a PLC.
It happens randomly, when I update the data, i cannot see any patern, sometimes it happens quickly, sometimes it takes longer...
The data socket is declared like that:
hr = DS_OpenEx ("psp://localhost/Server/Automate.405466", DSConst_WriteAutoUpdate, NULL, NULL, DSConst_EventModel, TIMEOUT_OPC_mSEC, &ecr_MW5465);
And is update like this:
hr = DS_SetDataValue(ecr_MW5465, CAVT_SHORT, l_buf, 1, 0);
The function does not return any error, but the value is not updated server side.
Lookout version is 6.6, the program is made with CVI 8.5.1 and communication is in ethernet modbus. I do not know if further details could be useful.
Thank you.

Fred,
Can you read the value being updated directly from the OPC server? Usually you can just view the values and see if they are updating.
The next thing to check would be to use the shared variable monitor to see if the variables that are bound to the OPC server are updating. It is under Tools >> Shared Variable >> Variable Manager.
Also, when you have the program running, do you get any type of error from reading the shared variable? If you are seeing an error, it would give us a little more insight into what is going on.
Brian Coalson
Software Engineer
National Instruments

Workflow 12300111 not updating data .

Hi experts,
i am trying to use workflow 12300111 for ESS leave request .
the workflow is not updating the values in the table for absence ie; PA2001
Please suggest what can be done .
thanks in advace,
Naval bhatt

@ Arg
which method do we have to use in TS12300097
i have tried with
class - CL_PT_REQ_WF_ATTRIBS
method- APPROVE
and
BO -ABSENCE
method- APPROVE
please suggest me if i am doing something wrong in this .
please tell me which roles are required for updating the absence.
thanks,
Naval

Not updating data in Tcode "RBT_ENH_GEN"

Actualy I have created S955 Infostructure using MC21 and updated using MC24. using append structure (ZAS955)I have appended one structure with S955 and activated table.now everything ok.but my scenario was not wrking.Now I went to MC22 regenerate the Info structure.table S955 automaticaly becomes inactive status.I m getting error message in Mc22,S955 table not activated.In this Tcode only I m getting error "RBT_ENH_GEN" table is not updating...

Actualy I have created S955 Infostructure using MC21 and updated using MC24. using append structure (ZAS955)I have appended one structure with S955 and activated table.now everything ok.but my scenario was not wrking.Now I went to MC22 regenerate the Info structure.table S955 automaticaly becomes inactive status.I m getting error message in Mc22,S955 table not activated.In this Tcode only I m getting error "RBT_ENH_GEN" table is not updating...

Can not update data in table view

When i open a table from a connection in the connection navigator i can not alter the data in it... I can only add new rows. Is there a setting so i can alter the data?
My user has update rights because when i write my own update statement and execute it, it works fine.

I found the issue... You can do it in 10g but you have to define a PK on the table, otherwhise he does not know what row to update. When i added a PK i could edit the data in Jdev in data view.

Mail App not updating date and time

Hey guys,
Has anyone else has this problem: My Mail app isn't updating the date and time at the bottom of my screen. (In between, the refresh button on the left and the new draft button on the right) Not sure how to fix it...
Thanks in advance!

Click on View on the top menu, click on Columns, and then click on "Date Received" to select it. Once it is checked, the Date and Time will display.
Cheers,
GB

Bapi function module to update PRPS table

Hi ,
Presently i have a requirement which needs to update some data from ZIOS table into PRPS table. Can any one tell me what is the Bapi function module for updating data into PRPS table.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Thanks,
Satish Raju
Edited by: Alvaro Tejada Galindo on Jan 12, 2010 11:46 AM

These ZZ fields are specific to your application, use the EXTENSION parameters.
Look in BAPI_PS_INITIALIZATION documentation, there is an explanation how-to fill specific fields.
For the BAPIs used to create and change project definitions, WBS
elements, networks, activities, and activity elements, you can
automatically fill the fields of the tables PROJ, PRPS, AUFK, and AFVU
that have been defined for customer enhancements in the standard system.
For this purpose, help structures that contain the respective key
fields, as well as the CI include of the table are supplied. The BAPIs
contain the parameter ExtensionIN in which the enhancement fields can be
entered and also provide BAdIs in which the entered values can be
checked and, if required, processed further.
CI Include Help Structure                      Key
CI_PRPS     BAPI_TE_WBS_ELEMENT                 WBS_ELEMENT
Procedure for Filling Standard Enhancements
Before you call the BAPI for each object that is to be created or
changed, for which you want to enter customer-specific table enhancemen
fields, add a data record to the container ExtensionIn:
o   STRUCTURE:    Name of the corresponding help structure
+o   VALUEPART1:   Key of the object + start of the data part+
o   VALUEPART2-4: If required, the continuation of the data part
VALUPART1 to VALUPART4 are therefore filled consecutively, first with
the keys that identify the table rows and then with the values of the
customer-specific fields. By structuring the container in this way, it
is possible to transfer its content with one MOVE command to the
structure of the BAPI table extension.
Note that when objects are changed, all fields of the enhancements are
overwritten (as opposed to the standard fields, where only those fields
for which the respective update indicator is set are changed).
Therefore, even if you only want to change one field, all the fields
that you transfer in ExtensionIn must be filled.
You have to use these parameters in BAPI_BUS2054_GETDATA as well as in BAPI_BUS2054_CHANGE_MULTI.
Regards

Bapi : BAPI_ALM_ORDER_MAINTAIN not updating table AFVU-USR08

Hi,
I have a requirement to update table AFVU-USR08.I am actualy dealing with tcode IW32/IW33 where in we need to update operation-->enhancement tab.I am using BAPI : BAPI_ALM_ORDER_MAINTAIN to do this.I am testing the BAPI directly( Not called in any program ),I can see a message like so and so order saved under notification,But there is no entry in table AFVU-USR08.
If any one have come across this prob. and got the sol. Pl. share it with me.
Your solution will be more helpful.
Thanks,
Bharani.

Hi Ferry,
1. I have also tried ur given code before BAPI_TRANSACTION_COMMIT.
    l_fname = 'SOBKZ'.
    l_fvalue = 'U'.
    CALL FUNCTION 'CO_BH_MOD_SINGLE_FIELDS'
      EXPORTING
        aufnr_imp = wa_meth-objectkey(12)
        field1    = l_fname
        value1    = l_fvalue.
but this program is giving dump for only this particular Value saying that This is PROTECTED field.
Can anyone help me out on How to Update Special Stock Indicator on Components Tab of Maintenance Order (IW32).
If anyone has faced such type of problem & solved it then please let me also.
2. Which BADI to use for Updating Special Stock Indicator when we press enter on Components tab in Transaction IW32 ?..
Thanks in advance,
Hope to get the solution soon from all SAP gurus.
and help will be appriciated .
Gaurav.

'BAPI_ALM_ORDER_MAINTAIN' Not Updating Fields

Hi,
We are using BAPI_ALM_ORDER_MAINTAIN to update Special Stock indicator
(RESB-SOBKZ) at component level for a service order (IW32).
BAPI is not updating the value which we are passing for this field but
intrestingly BAPI is updating rest of the fields at component level,
like Component Quntity, Componen Plant etc. Only Special Stock
Indicator field is an exception.
We are passing value in "BAPI_ALM_ORDER_COMPONENT-SPECIAL_STOCK" field
and updating BAPI Update table with X for this field.
Can somebody provide help on this.
Steps for the Reconstruction
Below is the source code which i am using to update Srvice order via
this BAPI
REPORT zbapi .
DATA t_meth TYPE TABLE OF bapi_alm_order_method.
**Internal table for Operation (BAPI)
DATA t_oper TYPE TABLE OF bapi_alm_order_operation.
DATA t_comp TYPE TABLE OF bapi_alm_order_component.
**Internal Table for Opertaions UP (BAPI)
DATA t_comp_up TYPE TABLE OF bapi_alm_order_component_up.
**Internal table for BAPI Return code
DATA t_ret TYPE TABLE OF bapiret2.
***WORK AREA DECLARATIONS
**Work Area for Hedaer
DATA:wa_header TYPE caufvdb,
wa_meth TYPE bapi_alm_order_method,
wa_op TYPE afvgb,
wa_comp TYPE resbb,
wa_comp1 TYPE bapi_alm_order_component,
wa_comp_up TYPE bapi_alm_order_component_up,
wa_oper TYPE bapi_alm_order_operation.
PARAMETERS:TEST.
****Fill Method Internal table
CLEAR wa_meth.
wa_meth-method = 'SAVE'.
APPEND wa_meth TO t_meth.
wa_meth-refnumber = sy-tabix.
wa_meth-objecttype = 'COMPONENT'.
wa_meth-method = 'CHANGE'.
wa_meth-objectkey(12) = '000004000104'.
wa_meth-objectkey+12(4) = '0010'.
wa_meth-objectkey+16(4) = '0010'.
APPEND wa_meth TO t_meth.
**Component Internal table
wa_comp1-reserv_no = '0000001072'.
wa_comp1-res_item = '0001'.
wa_comp1-activity = '0010'.
wa_comp1-item_number = '0010'.
wa_comp1-special_stock = 'B'.
wa_comp1-requirement_quantity = '15'.
wa_comp1-stge_loc = '0001'.
wa_comp1-backflush = 'X'.
APPEND wa_comp1 TO t_comp.
**Component Update Internal table
wa_comp_up-special_stock = 'X'.
wa_comp_up-backflush = 'X'.
wa_comp_up-requirement_quantity = 'X'.
wa_comp_up-stge_loc = 'X'.
APPEND wa_comp_up TO t_comp_up.
**Call Bapi
BREAK-POINT.
CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
TABLES
it_methods = t_meth
it_component = t_comp
it_component_up = t_comp_up
return = t_ret.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.

Hi Ferry,
1. I have also tried ur given code before BAPI_TRANSACTION_COMMIT.
    l_fname = 'SOBKZ'.
    l_fvalue = 'U'.
    CALL FUNCTION 'CO_BH_MOD_SINGLE_FIELDS'
      EXPORTING
        aufnr_imp = wa_meth-objectkey(12)
        field1    = l_fname
        value1    = l_fvalue.
but this program is giving dump for only this particular Value saying that This is PROTECTED field.
Can anyone help me out on How to Update Special Stock Indicator on Components Tab of Maintenance Order (IW32).
If anyone has faced such type of problem & solved it then please let me also.
2. Which BADI to use for Updating Special Stock Indicator when we press enter on Components tab in Transaction IW32 ?..
Thanks in advance,
Hope to get the solution soon from all SAP gurus.
and help will be appriciated .
Gaurav.

Data in server is not updated

i have modify the data STREET to "ANG MO KIO"
http://i192.photobucket.com/albums/z231/yzme/d1.gif
but the data in server still "HEAVEN ST"
http://i192.photobucket.com/albums/z231/yzme/d2.gif
I am using Time2Way T01, if it is when i sync the data will be uploaded, or do i need to configure somewhere to get the data upload ?
if the data in client and middleware is different, when i sync , the data from the middleware will again download to the client replace the modified values
OR
the data in the client will uploaded to the middleware and trigger the MODIFY bapi wrappers ?
<b>
when i check my MEREP_MON, and MEREP_LOG there is no data inside this meaning after i changed the values and perform the sync, Inbox and Outbox still remain the previous data as well as inside the MEREP_LOG,
is it the bapi wrapper not call by the client ?
</b>
and i find out that my bapi not get called, what additional code should i add instead of the code below.
DO I NEED TO IMPLEMENT SOME CODE FOR UPLOADER ??
do i have to change the reqDirectSync="true", if yes, how do i changed, just change inside the editor, or there is somewhere to configure in sapgui
after i changed the data , i try to sync, and i check on merep_mon
what specific or additional steps i need to configure, on uploader / receiver or synchronizer
<b>i do not implement any syncBoDelta or global reset ?</b>Can someone explain the term "delta" to me and its activities?
if i have upload something, and sync, the Inbox should have something right ??
i just put add this code to modify my records
public String modifyRecord(String eventName,boolean didNavigate){
                         String syncBoName="ZCON";
                         String syncKey="0001230297";
                         tableViewBean.setString(syncBoName +" "+syncKey);
                         System.out.println("SyncBoName: " +syncBoName + " syncKey: " +syncKey);
                         tcp = TableContentProvider.instance(syncBoName);
                         tcp.modifyTable(syncBoName,syncKey);                                   return JSP_DETAIL_SYNCBOINSTANCE;
public void modifyRecord(String syncBoName,String syncKey){
SyncBoDescriptor sbd=null;
sbd=descriptorFacade.getSyncBoDescriptor(syncBoName);
SyncBo sb=null;
try{
System.out.println("bp 2");
sb=dataFacade.getSyncBo(sbd,syncKey);
}catch(PersistenceException pex){
System.out.println("Exception in modifyRecordLoc:" +pex.getMessage());
SmartSyncTransactionManager transactionManager;
try{ transactionManager=dataFacade.getSmartSyncTransactionManager();
if(!transactionManager.isTransactionStarted()){
transactionManager.beginTransaction();
boolean b8=false;
b8=setHeaderFieldValue2(sb,"STREET","ANG MO KIO");
transactionManager.commit();
SetSendType();
listAllOutDelta();
checkInboxConflict();
}catch(Exception e){
System.out.println("Exception in modifyRecordAmt2:" +e.getMessage());
public void checkInboxConflict(){
          ErrorConflictInbox errorConflictInbox= SmartSyncRuntime.getInstance().getInboxNotifier().getErrorConflictInbox();
          MeIterator iter;
          SyncBoResponse resp;
          try {
          iter= errorConflictInbox.getAllSyncBoResponses();
          while(iter.hasNext()){
          resp= (SyncBoResponse)iter.next();
          String bo=resp.getSyncBoDescriptor().getSyncBoName();//SyncBo Name
          String state=resp.getSyncBoResponseState().toString();
          String res=resp.getResponseType().toString();//Get the SyncBo response type (conflict or ERROR)
          String msg=resp.getText();// This will return the exact message from the server
          System.out.println("bo:" +bo +" state: " +state +" res: " +res +" msg:" +msg);
          System.out.println("state:" +resp.getSyncBoResponseState().toString());
          if(resp.getSyncBoResponseState().equals(SyncBoResponseState.INITIAL)){
               String a=resp.getSyncBoResponseState().toString();
               resp.acceptClientSyncBo();
               String b=resp.getSyncBoResponseState().toString();
               resp.delete();
               System.out.println("state1: " +a +"state2: " +b);
          boolean syncStatusComplete= SmartSyncRuntime.getInstance().getInboxNotifier().isSyncStatusComplete();
          System.out.println("syncStatus:" +syncStatusComplete);
          }catch (Exception e) {
          e.printStackTrace();
public void listAllOutDelta(){
          SyncBoOutDeltaFacade deltFac=SmartSyncRuntime.getInstance().getSyncBoOutDeltaFacade();
          MeIterator allDelta;
          try {
               allDelta = deltFac.getAllDelta();
               while(allDelta.hasNext()){
                         SyncBoOutDelta outDelta=(SyncBoOutDelta)allDelta.next();
                         System.out.println("SyncKey:" +outDelta.getSyncKey() +" Action:" +outDelta.getAction()
                                   +" State:" +outDelta.getStateId() +" SendType:"+outDelta.getSendType());
          } catch (SmartSyncException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          } catch (PersistenceException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
public void SetSendType(){
          SmartSyncRuntime ssRuntime = SmartSyncRuntime.getInstance();
          SyncBoOutDeltaFacade boDeltaFacade = ssRuntime.getSyncBoOutDeltaFacade();
          SyncBoDescriptorFacade descF = ssRuntime.getSyncBoDescriptorFacade();
          SyncBoDescriptor myBO = descF.getSyncBoDescriptor("ZCON");
          boDeltaFacade.setSendType(myBO, SyncBoOutDeltaSendType.SEND_DIRECT);
//SyncManager.getInstance().synchronizeWithBackend(VisibilityType.USER_SHARED);
     public boolean setHeaderFieldValue2(
          SyncBo sb,
          String headerFieldName,
          Object value) {
          SyncBoDescriptor sbd = sb.getSyncBoDescriptor();
          //RowDescriptor trd = sbd.getTopRowDescriptor();
          System.out.println("bp 10");
          RowDescriptor trd=sbd.getRowDescriptor("010");
          System.out.println("bp 11");
          FieldDescriptor fd = trd.getFieldDescriptor(headerFieldName);
          System.out.println("fd:" +fd.getFieldName());
          if (fd != null) {
          BasisFieldType bft = fd.getFieldType();
          //Row header = sb.getTopRow();
          System.out.println("bp 12");
          //Row header = null;
          Row[] header=null;
          //try {
               //header = sb.getRow("0001211181");
               //header=sb.getTopRow();
               header=getItemInstances(sb,"010");
               if(header==null){
                    System.out.println("is null");
               }else{
                    System.out.println("not null");
          //} catch (PersistenceException e1) {
               // TODO Auto-generated catch block
          //     System.out.println("Exception getRow:" +e1.getMessage());
          //     e1.printStackTrace();
          System.out.println("bp 13");
          try {
//             Integer operator
          if (bft == BasisFieldType.N) {
               System.out.println("Numeric");
          NumericField nf = header[0].getNumericField(fd);
          if (nf != null) {
          BigInteger ii = new BigInteger(value.toString());
          nf.setValue(ii);
          return true;
          } else {
          return false;
//             Character operator
          if (bft == BasisFieldType.C) {
               System.out.println("Character");
          CharacterField cf = header[0].getCharacterField(fd);
          if (cf != null) {
          cf.setValue(value.toString());
          return true;
          } else {
          return false;
//             Decimal operator
          if (bft == BasisFieldType.P) {
               System.out.println("Decimal");
          DecimalField df = header[0].getDecimalField(fd);
          System.out.println("bp 1.1");
          if (df != null) {
               System.out.println("bp 1.2");
          BigDecimal bd = new BigDecimal(value.toString());
          System.out.println("bp 1.3");
          df.setValue(bd);
          System.out.println("bp 1.4");
          return true;
          } else {
               System.out.println("bp 1.5");
          return false;
//             Similar operation for time and date operator fields
          if (bft == BasisFieldType.D) {
               System.out.println("Date");
          DateField df = header[0].getDateField(fd);
          if (df != null) {
          if (value.toString().equals("0")) {
          Date dat = Date.valueOf("0000-00-00");
          df.setValue(dat);
          } else if (!value.toString().equals("")) {
          Date dat = Date.valueOf(value.toString());
          df.setValue(dat);
          } else {
          Calendar cal = Calendar.getInstance();
          java.sql.Date bd =
          new java.sql.Date(cal.getTime().getTime());
          df.setValue(bd);
          return true;
          } else {
          return false;
//             Similar operation for time and date operator fields
          } catch (SmartSyncException ex) {
          System.out.println(ex.getMessage());
          } catch (PersistenceException e) {
          System.out.println(e.getMessage());
          return false;
SyncType: T01 Wrapper: GetList,GetDetail,Modify
<?xml version="1.0" encoding="utf-8" ?>
- <MeRepApplication schemaVersion="1.1" id="ZCON" version="01">
<Property name="CLIENT.BUILDNUMBER" />
<Property name="C_APPLRESOLVE" />
<Property name="DATA_VISIBLE_SHARED">X</Property>
<Property name="E_APPLRESOLVE" />
<Property name="FACADE_C_CLIENT">X</Property>
<Property name="FACADE_E_CLIENT">X</Property>
<Property name="HOMEPAGE.INVISIBLE" />
<Property name="INITVALUE" />
<Property name="RUNTIME">JSP</Property>
<Property name="TYPE">APPLICATION</Property>
- <SyncBO id="ZCON" version="1" type="timedTwoWay" allowCreate="false" allowModify="true" allowDelete="false" reqDirectSync="false" downloadOrder="1">
- <TopStructure name="TOP">
- <Field name="SYNC_KEY" type="N" length="10" decimalLength="0" signed="false" isKey="true" isIndex="true">
<Input type="create">false</Input>
<Input type="modify">false</Input>
</Field>
- <Field name="PERSNUMBER" type="N" length="10" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <ChildStructure name="010">
- <Field name="SYNC_KEY" type="N" length="10" decimalLength="0" signed="false" isKey="true" isIndex="true">
<Input type="create">false</Input>
<Input type="modify">false</Input>
</Field>
- <Field name="PERSNUMBER" type="N" length="10" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="CITY1" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="CITY2" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="STREET" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="HOUSE_NUM" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="REGION" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
</ChildStructure>
</TopStructure>
</SyncBO>
</MeRepApplication>
Message was edited by:
        yzme yzme

<u>my intention is very simple, i just need to update a field in a row and update to the middleware so that the backend will reflect the changes. </u>
>2 if i set the conflict/error handling to application, then i should have to implement some code for it, right ?
>3) List syncbooutdelta
<b>SyncKey:0001233035 Action:M SendType:SEND</b>
doesnt it mean that when i sync , the uploader will pick up this data and do a modification ??
i have change the metadata like this
<SyncBO id="ZCON" version="1" type="timedTwoWay" allowCreate="false" allowModify="true" allowDelete="false" reqDirectSync=<b>"true" </b>downloadOrder="1">
1) i try to sync the application and check the worklist monitor, there is nothing in the inbox ? how come ?
2)if i test using emulator, i try to modify a value and execute, i am getting the following error.
<u>
Header action from mobile="MOD", R/3 action="ADD"
Return code 1 (DOWNLOADER)
</u>
i try to modify not "Add"
3) I am using Time 2 Way , how to check it is synchronous or asynchronous ? in merep_sbuilder, the default asyn. is checked, meaning async ??
the type is T01 , ASYNC
4)
public void checkInboxConflict(){
          ErrorConflictInbox errorConflictInbox= SmartSyncRuntime.getInstance().getInboxNotifier().getErrorConflictInbox();
          MeIterator iter;
          SyncBoResponse resp;
          try {
          iter= errorConflictInbox.getAllSyncBoResponses();
          while(iter.hasNext()){
          resp= (SyncBoResponse)iter.next();
          String bo=resp.getSyncBoDescriptor().getSyncBoName();//SyncBo Name
          String state=resp.getSyncBoResponseState().toString();
          String res=resp.getResponseType().toString();//Get the SyncBo response type (conflict or ERROR)
          String msg=resp.getText();// This will return the exact message from the server
          System.out.println("bo:" +bo +" state: " +state +" res: " +res +" msg:" +mtext);
          boolean syncStatusComplete= SmartSyncRuntime.getInstance().getInboxNotifier().isSyncStatusComplete();
          System.out.println("syncStatus:" +syncStatusComplete);
          }catch (Exception e) {
          e.printStackTrace();
<u>bo:ZCON state: INITIAL res: CONFLICT msg:Conflict: R/3 = delete, device = modify
SyncStatus=true (complete)
</u>
5) after that i change my code to this
while(iter.hasNext()){
if(resp.getSyncBoResponseState().equals(SyncBoResponseState.INITIAL)){
    String a=resp.getSyncBoResponseState().toString();
    String a1=syncBO.getSyncState().toString();
    resp.acceptClientSyncBo();   //No transaction stated to commit
    resp.delete();
String b=resp.getSyncBoResponseState().toString();
String b2=syncBO.getSyncState().toString();
System.out.println("state1: " +a +"state2: " +b);
System.out.println("SyncState1: " +a1 +"SyncState2: " +b1);
<u>state1: INITIAL state2: RESOLVED </u>
<u>SyncStatus1:QUANRANTINE SyncStatus2: INCONSISTENT</u>
and i try to sync ...no data in worklist
6)i try to list out all the delta to be uploaded
ListAllOutDelta to be upload
<u>SyncKey:0001233349 Action:I State:99925F8E24DFFE49A4563C5E018E9B61 SendType:SEND
</u>
i am modifying the rows, not Insert a new row, the Action:'I' instead of 'M', pls clarify on this.
after i sync, i found out that there is 2 record with different syncKey but same primary key and all attributes appear to be same except the attribute that i changing.
<u>SYNCKEY    PERSNUMBER CITY STREET HOUSENO</u>
0001230298 000000000 HELL <u>ANG MO KIO</u> 0123456789 (modified record)
0001230299 000000000 HELL <u>HEAVEN ST</u> 0123456789(old record)
i check the application and found out that the previous record that i modify have its value changing locally but not updated into the backend, after sync, there is another record downloaded into this application which is the old record before i modify with different syncKey.
but when i check the backend table, there is only 1 record inside, because i dont implement the 'Create' Bapi.
does it make sense ?
7) when i check my client , the data is persisted with modified value , but the changes is not reflected in the server, how come the data in client is not uploaded to the server.
acceptClientSyncBo will make the client wins how come the data is not get updated in server ?
Re: Regarding modifying Sync BO
According to him, can anyone translate the things highlighted below
for modifying one sync bo instance , there is no need to use createUnlinkedCopy()..
just use like this..
sb = dataFacade.getSyncBo(sbd,key);
SmartSyncTransactionManager transactionManager;
transactionManager = dataFacade.getSmartSyncTransactionManager();
transactionManager.beginTransaction();
setHeaderFieldValue(sb,"PERSNUMBER","9866321467");
setHeaderFieldValue(sb,"FIRSTNAME","RajaSekhar");
setHeaderFieldValue(sb,"LASTNAME","Varigonda");
setHeaderFieldValue(sb,"PROFESSION","Technical Specialist");
setHeaderFieldValue(sb,"***","MALE");
setHeaderFieldValue(sb,"BIRTHDAY","1977-09-28");
setHeaderFieldValue(sb,"HEIGHT","165");
setHeaderFieldValue(sb,"WEIGHT","75");
// Commit the transaction
transactionManager.commit();
setHeaderFieldValue - can be used to set value in new sync bo instance , or modify the instance.
<b>
But one main think here have to consider is , if you have created one Sync Bo instance , not synchronized with back end and u have modified that, then thats just like a creation .So during sync this will call Create Bapi Wrapper.
</b>
But after synchronization , is u are modifying that instance , then it is a modification(will call MODIFY Wrapper in back end during synchronization). u must have the right to modify this instance in the client side.
hope u got it.
u can debug MI Applications in NWDS.
refer this blog written by Arun
/people/arunkumar.ravi/blog/2006/02/22/execute-debug-your-mi-code-from-nwds
let me know , if u have doubts
Regards
Kishor Gopinathan
pls comment...

Updating SAP fields through BAPI (which are not BAPI parameters)

Hello,
   I need to update season and collection fields in sales order (AFS), these fields are not in sales order creation BAPI. Can I still somehow use them in extensionin as parameters?? How do we do it?? BAPI: /AFS/BAPI_SALESORD_CREATEFDATA
Also there is another BAPI /AFS/VBAK_SALESDOCUMENT_CHANGE which has these fields in ITEM_EX table (which is extension for item table provided by SAP), but this dosent update the sales order as well.
I would appreciate if anyone has a clue how to do this.
Thanks,
Amit.

/AFS/VBAK_SALESDOCUMENT_CHANGE
Append structure BAPE_VBAP
J_3ASEAN
/AFS/COLLECTION
/AFS/THEME
Append structure BAPE_VBAPX
J_3ASEAN              CHAR1
/AFS/COLLECTION              CHAR1
/AFS/THEME              CHAR1
Table: ITEMS_EX
OPERATION                      009
DOC_NUMBER                     200000608
ITM_NUMBER                     000000
MATERIAL                       2000010022
UPDAT_FLAG                     I
SEASON                         C1
COLLECTION                     DAM
THEME                          SEG
Pass the season Fields through EXTENSIONIN structure to update data into tables.
STRUCTURE                      BAPE_VBAP
VALUEPART1                         020000060800000000000000C1 DAM SEG
STRUCTURE                      BAPE_VBAPX
VALUEPART1                         0200000608000000XXXX

BAPI BAPI_ALM_ORDER_MAINTAIN is not updating data

Similar Messages

Maybe you are looking for