Bapi/FM to delete the status record from Business location(O402)

Hi,
Is there any BAPI/FM to delete the status from Business location?
My requirement is as follows:-
1. I have to delete the last status from business location.
2. I can find out the number of status maintained for a business location,
    a. so if the status which i have to delete is visible in table contorl,
         i can decide the cursor position very easily in bdc.
     b. But if i have to scroll down to get the status record,
         in that the cursor position is not known.
Please help.

Hi,
Any idea?
Even if i write a bdc, i didn't know how to find the last record. The page down and page up will also not work as there may be chances that mutiple status can be removed.

Similar Messages

How to delete the single record from the ODS

HI,
I want to DELETE the particular record from ODS.. how to delete that..
plz give me the solution.. it's urgent..
with regards
@jay

Hi Prakash,
You can delete a particular record from ODS by specifying the key field name in Selective deletion button available in Contents tab in the manage screen of ODS. But it will only delete the record from the active data table and not from the Change log and new data table . You should be very carefull if you are doing in Production system as there is chance of deleting other records accidentally.
Go to Selective deletion button - > Click on delete selection -> Enter the key field values of the record you want to delete-> Press save button to save as Variant -> Go back and click on selection button -> Chosse the background job type -> Click on start button.
Regards,
Prakash

I want to delete the transactional record from database table

Hai,
I want to delete the transactional data from database table with out using the dialog programming is it there any trancation for this.
for master data we have the transaction code for delete the records. The t.code is 'OBR2'.
Plz help in that cse.
Thanks and regards,
P.Naganjana Reddy

Hai,
Plz help me urgent.
I am asking i want to delete transactional data from database table without using the dialog programming.
Thanks and Regards,
P.Naganjana

How to delete the matching records from two internal tables

Hi ,
I have two internal tables say A and B of the same type. If A has 10 records and B has 4 records , I want to delete the 4 records in B from A .
loop at B into wa .
delete A where key = wa - key .
endloop.
takes a long time if the table B is huge. how can I improve the performance.
Thanks.
Gayathri

Hi Gayathri,
You could try field-symbols. It reduces the data transfer from the internal table B to the work area.
field-symbols <fs_itab_b> like line of B.
loop at B assigning <fs_itab_b>.
delete A where key = <fs_itab_b>?-key.
endloop.
Regards,
<a href="https://www.sdn.sap.com:443http://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=zwcc%2fwm4ups%3d">anand Mandalika</a>.

How to delete the child record from the database

how to delete a parent and child record from the database can we do it in the servlet and my database is oracle

I'm not sure I understand the question but you could certainly use the JDBC API from within your servlet to access and modify a DB. You could also use an EJB layer to access your DB and accomplish the same tasks.

How to Delete the condition record in CRM

HI,
Can you please help me how to delete the condition record from condition table in CRM.
Please explain the usage of FM CRMXIF_CONDITION_SEL_DELETE with examples.
I have also read the documention of the function module. How to use this FM for custom defined condition table.
(this is the code given in Documentation)
DATA-OBJECT_REPRESENTATION         = 'E'
DATA-SEL_OPT-CT_APPLICATION              = 'CRM'
DATA-SEL_OPT-OBJECT_TASK                    = 'D'
DATA-SEL_OPT-RANGE-FIELDNAME        = 'PRODUCT_ID'
DATA-SEL_OPT-RANGE-R_SIGN                  = 'I'    (Including)
DATA-SEL_OPT-RANGE-R_OPTION           = 'EQ'
DATA-SEL_OPT-RANGE-R_VALUE_LOW = 'PROD_1'
Thanks
Shankar

Hi Shankar,
I am using the same CRMXIF_CONDITION_SEL_DELETE function module to delete condition record present in CRM.
But it is giving me below error in the return table of the FM after i run the program. Can you please correct me if I am doing any thing wrong?
Error in lt_return: SMW3     CND_MAST_SEL_DEL_EXT_VALIDATE     CND_M_SD
code:
ls_range-fieldname = 'PRODUCT_ID''.
ls_range-R_SIGN = 'I'.
ls_range-R_OPTION = 'EQ'.
ls_range-R_VALUE_LOW = '123456'.
APPEND ls_range TO lt_range.
MOVE lt_range TO ls_entry-SEL_OPT-range.
ls_data-SEL_OPT-object_task = 'D'.
ls_data-SEL_OPT-ct_application = 'CRM'.
ls_data-object_representation = 'E'.
CALL FUNCTION 'CRMXIF_CONDITION_SEL_DELETE'
EXPORTING
    DATA          = ls_date
IMPORTING
   RETURN        = lt_return
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
IMPORTING
    return = lt_ret.
Edited by: Saravanaprasad Nadar on Jul 7, 2010 1:27 AM

How to delete the duplicate records in a table without promary key

I have a table that contains around 1 million records and there is no promary key or auto number coulums. I need to delete the duplicate records from this table. what is the simple effective way to do this.

Please see this link:
Remove duplicate records ...
sqldevelop.wordpress.com

How to delete a particula record from InfoObject

Dear All,
I got some problem situations and would like some suggestions from any of you.
<b>Problem detail</b>- one process chain was failed due to could not activate an ODS-A
- ODS-A and ODS-B contained InfoObject-0BP_GUID
- errors were found and referred to the InfoObject-0BP_GUID.
- The errors referred to one record composed of incorrect data. I still wondered where it came from since normally, 0BP_GUID keeps only guid.
I'd like to delete the incorrect record.But I do not want any impact to InfoProviders.
I'm not sure how to resolve this case. This has to be very carefully managed because it happened on production system.
Actually, I did find one thread in this forum "Delete SID table content". But I'm not sure whether it could be applied to my case.
Any suggestion would be appreciated.
Thank you very much.
-WJ-

Unfortunately you cant delete data without inpacting the data in the. This is how BW works and you will appreciate this because youur transaction data is secured and you wont face any data issues later on. Let me give you an example. Lets sa your ODS or cube stored sales data and in the ODS you have sales org, customer and amount. When you run the report, data is read from this cube /ods, but to fetch the master data it goes to the master data tables via SID. When the transaction data gets loaded and when you try to delete a record in master data, it will let you do.
If you still wish to do, proceed as follows:
1. Delete the data in cube first.
2. Delete the particular record from the master data table.3
3. Reload the data to the ODS / cube.
Without deleting the transaction data in the ODS / Cube the system wont let you delete the data in master data and you will get any of the following messages.
(a) " not all master data could be deleted
(b) "the master data can not be deleted".
Ravi Thothadri

Delete overlapping/duplicate records from cube

Hi All,
Kindly let me know how to delete overlapping requests from a cube. Actually the cube is getting loaded from varuous infosources, but there are records which get duplicated and the are not wanted , then hiow to delete the duplicate records from the cube.
Regards,
dola

I think what arun is perfectly right....
use DSO for consolidation of various requests..from diferenet infosources...
Now load from DSO to cube...and it is very much possible...though will require little work.
Delete duplicate records option is usually used for master data.With transacdtion data i don't think its advisable.
Regards,
RK

Delete Null value records from 0BPARTNER

Hi Experts,
For 0BPARTNER info object we have 40 attributes. My requirement to delete the 0BPARTNER records which have all the attributes are NULL. I tried to delete the NULL records from master data maintenance, but those records already loaded to upstream targets.
Can anyone please suggest me any other solution to delete the NULL records from 0BPARTNER master data.
Thanks in advance,
Sai Chand.S

hi
try this
/BI0/PBPARTNER is the transparent table name for the 0BPARTNER.
steps
1.Go to SE14 t-code
2.Enter Table Name /BI0/PBPARTNER
3.Click on the Radio Button - Delete Data
delete the data S , P-Tables in the database

Select statement from a join file deletes the primary records with MS Expl.

Hello,
is reality,
Select statement from a join file deletes the primary records with MS Explorer 6, Firefox not, this with a normal data provider or with a normal "select..." statement.
This is very strange, I should have a.a.s.p. a solution or workaround
Thanks, Franco.
Message was edited by:
fbiaggi

Please see the following excerpt from the online documentation.
http://docs.oracle.com/cd/E11882_01/server.112/e22490/ldr_modes.htm#SUTIL1332
Enabled Constraints
During a direct path load, the constraints that remain enabled are as follows:
NOT NULL
UNIQUE
PRIMARY KEY (unique-constraints on not-null columns)
NOT NULL constraints are checked at column array build time. Any row that violates the NOT NULL constraint is rejected.
Even though UNIQUE constraints remain enabled during direct path loads, any rows that violate those constraints are loaded anyway (this is different than in conventional path in which such rows would be rejected). When indexes are rebuilt at the end of the direct path load, UNIQUE constraints are verified and if a violation is detected, then the index will be left in an Index Unusable state. See "Indexes Left in an Unusable State".

How to speed up the deletion of 11million records from the table

Hi,
How to speed up the deletion of 11million records from the table.
I need expiditious reply. Please do the needfull in advising
Regards

Please try to understand the question.Well it would help if you would answer some of the questions you have been asked as your question is not complete and clear and no matter how hard we try, we really need you to try and ask the question properly.
So as previously asked
Which simply supports the idea that we need:
1) better definition of the business purpose (why)
2) oracle version
3) operating system
4) hardware configuration
to give a moderately accurate answer.
I would like to add
5) How many rows in total in the table to begin with.
6) What is your delete statement
7) Is this a one time operation or will it happen regularly
8) Can you use partitioning.

Error while updating the status record of IDOC in SAP

Hi All,
I am facing this problem. I have done outbound processing and IDOC was sent successfully from SAP to EDI system and it was processed in EDI and now EDI system wants to send the status back to SAP with a status message and the status number that we are using is '24' and we have mapped all the fields in the status table EDIDS and made sure that EDI system sends all those and I think Counter field can not be determined by EDI system so EDI system used the counter '1' since it can not determine how many counters are already there in SAP and unless we pass the value to this counter field we were getting the error. After passing all the values the status of the IDOC is updated with the status '00' instead of '24' and we do not know why it is happened and I would like to know how SAP converts the status record that is received from the EDI system.
Please let me know how the status record will be translated into SAP from EDI system and I ahve followed basically EDIDS structure and the IDOC status is updating in SAP but with wrong status number and the alignemnt also missing in SAP fields like if I give some text in the EDI it is splitting and storing in 2 fields.
Please help me in this and I think I have explained the problem in a detail manner.
Thanks,
Ramesh.

Hi Naresh,
Thanks for the reply and my question is since EDI system is able to send the status back to SAP from EDI system and only problem is it is updatinf the status wrong and I have checked the EDIDS table also and the entry is creating with another counter and please confirm me that it is because of EDI does not support the status record update so that I can confirm to the client that there is nothing wrong in the way SAP functions and EDI system can not update the status code in the SAP.
Thanks,
Ramesh.

How to delete the material records related to storage type

Dear SAP guru's,
I got a situation that if the material "XXXXXX" exists in two different storage type (let say 001 & 002 ) and the material needs to be removed out of one (Let say 002) to avoid the picking and putaway in future.
Inorder to accomplish an above requirement we tried the below cases
Case 1: By flagged the material "XXXXXX" under storage type 002 in MM06 transaction.But it didn't restrict the system on allocating and removing the stock from /to to the storage type 002.
Case 2:After we flagged the material for deletion under storage type 002 ,we used to MM71 transaction to archive & delete the material record that assocaited with the storage type 002 completely.
I am kind of queiries to know if there is any other method or procedure available to delete the storage type associated material records in SAP.
Please guide me with the other options.Thanks.
Regards,
John.

Hi John,
Its very simple, remove the Storage type indicators from the material master - Warehouse View 1 at Stock placement & Stock removal section, with this it won't pickup or place the materials in the concerned storage type.
If you have extended this materials to more than 1 storage type, you need to do the same for all the storage types.
Reward if it is helpful.

How to delete the duplicated records, not just surpress the records?

I am new to CR. Right now I am doing a project which needs CR get query from Oracle. I got the query from Oracle. There are records with duplicated fields. For example (the following only show part of fields):
ID    body_code
1            10
2             10
3             15
4              15
5              15
6              16
I need to only select records (not surpress, because I will do some caluculate later) like following:
ID         body_code
1             10
2              15
3               16
I tried to creat selection fomula in fomula workshop, shown as follows:
onlastrecord;
<>next
but CR said next can be evaluated. I think it must have something to do with the print-time. So what show I do to delete the duplicated records.Thank you very much.

Ting,
Try this:
Insert a group on body_code. Then create a running total called Distinct Count. Field to summarize -> ID, Evaluate on change of group Group # 1 Body Code, and Never Reset.
Then insert a chart in the report header:
In the advanced layout, select body_code on change of and select Distinct Count running total in the Show values.
I hope I understood what you're looking to accomplish.
Z

Bapi/FM to delete the status record from Business location(O402)

Similar Messages

Maybe you are looking for