BAPI/FM ( tran MI09) to enter count without ref. to inventory doc

hi,
I wanted a function module/BAPI that can be used to enter count for physical inventory WITHOUT reference to inventory document(transaction MI09)
I found a BAPI to enter count for physical inventory with reference to inventory document(transaction MI04) but unable to find one without reference to Inventory document number .
please help me regarding the same

Hi Balaji,
Please refer the link,
require function module for transaction MI09
Regards,
Hema.
Reward points if it is useful.

Similar Messages

BADI for Enter Inventory Count Without Doc. Ref.

Hi everybody.
I need a BADI for enter inventory count without doc. ref. Do anybody know some?
Thank you very much

Please. Any idea?
Thanks.

BAPI for counting without inventory document?

Hi,
Is there a BAPI for counting without inventory document? Eg transaction MI10.
Best regards,
Morten

Hi Morten,
Can checkout these FMs:
BAPI_MATPHYSINV_GETDETAIL 
Read items for a physical inventory document
BAPI_MATPHYSINV_GETITEMS 
Read list of physical inventory documents with items
BAPI_MATPHYSINV_GETLIST 
Read list of phys. inv. documents
BAPI_MATPHYSINV_POSTDIFF 
Post differences for certain items in a phys. inv. document
Regards,
Raj

Error in Inserting Interval in T.code FBN1 -Enter intervals without overlap

Hi,
I was doing Account to Releasing through VF02, then I got the error message Incorrect doc.no.: 2009750001. Select document number between 2010000001 and 2010999999.
In FBN1, when I try to insert the number range, it shows up another message,"Enter intervals without overlap"
Please advice what to do.
Thanks and Regards

Hi,
Your no range is overlapping may be because of -
(1) You are trying to manually put no range which already exist or
(2) Check no & year; it may also overlap or
(3) May be your all no range are in use, so you have to delete no range
You can do another thing
Go to billing document (VOFA) & assign proper no range
Regards
Santanu Giri

How can I use word count without it counting the words in the end notes by default?

How can I use word count without it counting the words in the end?
Now I have to highlight the text to get a count.

I don't think that is possible, it does what it does.
Peter

Enter intervals without overlap

Hi Guys,
While i am trying to giving the number range in (FBN1), i am getting this is error " Enter intervals without overlap" i tried so many number ranges but i didnt solve the error, can you please help me on this.
Regards,
Shekar.v

hi, shekar,
can u elaborate the problem further.
as far as i kno in FBN1, u need to maintain the no ranges with serial no.
ie
from MM point of view 49(GI & TP), 50(GR w.r.t PO), 51(invoice)
now u maintain these no ranges gi to new line item add a new no. range. and go to drop-down, it wll give u the no. ranges available to u. select 1 frm them.
hope it wll help u.
Regards,
yk

Behind Router and Switch, Can't Enter URLs Without Dot-Com

Hello all,
I switched my networking situation this morning and now I've lost my favorite feature...the ability to enter URLs without a .com and have Safari auto-complete them. Here's my setup:
Wall->modem->D-Link Wireless-G Router->Netgear Gigabit Switch->iMac
Before, I just had my iMac connected directly to the modem, but now I have some new devices that I needed to network in. The Internet and everything else is working correctly, it's just that one thing that really bothers me. I've thumbed around through manuals and D-Link's router settings and I can't seem to find the giant on/off switch switched to off. Any ideas? Help?
Thanks!

Mateo wrote:
Before, I just had my iMac connected directly to the modem, but now I have some new devices that I needed to network in. The Internet and everything else is working correctly, it's just that one thing that really bothers me. I've thumbed around through manuals and D-Link's router settings and I can't seem to find the giant on/off switch switched to off. Any ideas? Help?
Based on your description of the change, my guess is that your iMac used to deal with Time Warner DNS directly and now it may be using the DNS routing settings in the D-Link. As the former owner of a D-Link I would guess you might go look in the WAN settings for the DNS field on the D-Link (in the browser-based configuration utility) and make sure the IP address there matches whatever you had entered in the DNS field in the Network settings on your Mac.

Enter count in MI04, have error Message no. M3897

hi all,
When enter count using MI04 with same material different storage locations , Message no. M3897"The plant data of the material MATERIAL is locked by the user ABC". However when use MI05, the message is not there. Can this message be suppressed?
Thanks and regards,
Jon

Jürgen L I guess that we have open the material master record in one session and we are trying to enter the count in second session for the same material, it will definately throw the erro message as posted in thread by Jon
Vice versa, if go to MI04 and open the inventory document, and now if you try to open material amster record , it will again throw an error message that plant data is locked for material XXXX
I agree that if the posting of count in such a case will definately affect the posting /valuation..
jonyau2003, is the user ABC the user who enters the count or is this a user different from the user who enters the count?Also Jurgen *whether the same user or diffener user has opened that respective Transaction (i.e. material master data MM02 and inventory document MI04),* you are bound to get the erro message as the table entries are locked.
It hardly matters even if you technically enter the message in this customizing table, this does not automatically mean that the programs are looking into this table. Only programs that are prepared to check for customized message attributes will look into this table.
Br,
Tushar

Is it possible to enter more than 333 items in a physical inventory Doc.?

Hi Gurus
I want to enter more than 10000 line items in a physical inventory document. how can I achieve this please help. We are using SAP IS Retail.
Regards
Muneer . V.K

Hi
We are using PDA device to enter counted qty before that we will arrange all articles based on MC and we will distribute the work to different counting teams. We have a Z program developed for PDA with following logic.
Pseudo Logic
1)     Application is used to create Physical Inventory Count.
2)     There are 2 options provided for physical Inventory Count
      i) With Reference of Physical Inventory document
      ii) Without Reference.
3)     If with reference is chosen , Inventory document no. is available for input
4)     If stock type is entered in without reference then vendor is mandatory for input.
5)     User can enter the site, storage location and the following validations will be done on these screen inputs
u2022     Validate the site against SAP entry and check whether the ser has authorization in the site
u2022     Validate the storage location
u2022     Validate Vendor if entered
u2022     Validate Physical Inventory doc no. if entered
6)     In second screen, user will scan EAN/UPC number of the article and the following validations will be done.
u2022     Validate the EAN/UPC number. Check whether the number is available in SAP
u2022     Check whether the article is extended for the site
u2022     Get the base unit of measurement for the article
u2022     Get the article description from the table
u2022     Get the conversion factors for the barcode unit of measurement
u2022     Get Stock on hand for the article
7)     Perform the following validations on the unit of measurement input
u2022     Check whether the unit of measurement is available in the system
u2022     Check whether the unit of measurement is defined for the article
8)     Perform the following validations on the quantity entered by the user
u2022     Check the format of the quantity input
9)     Move all the details along with quantity to a buffer table. Clear all the input fields for the next set of scan and move the current details to the last scanned variable for display
10)     In case duplicate scanning of article, cumulate quantities instead of adding new entry to the buffer table
11)     If the user click on option DISP, call the third screen
12)     In third screen, all the EAN/UPC numbers will be displayed with an option for scrolling and removal
13)     When the user choose option SAVE from the third screen, create physical Inventory document and update the count by following the below steps
u2022     Prepare the header parameters for the BAPI
u2022     Prepare the line Item parameters for the BAPI
u2022     Create PI document using the BAPI_MATPHYSINV_CREATE_MULT and BAPI_MATPHYSINV_COUNT
u2022     Trigger error message in case of any failure
14)     Clear and refresh all the variables and internal tables to proceed
15)     Create HTML templates for the screen in SE80 under the internet service ZNESTO
16)     Publish the IAC templates for the screens in SE80 under the internet service ZNESTO
Regards
Muneer V.K

You cannot switch to a movement type without ref. to a PO

I created a PO from a P.Rq. [ from MDO4]
NOW WHEN i TRY TO DO GOODS RECEIPT .....MIGO
i GET "you cannot switch to a movement type without ref. to a PO"
{You have replaced the movement type suggested with another movement type that does not refer to a purchase order.}
I have used the PO as reference that was created from the P.Rq. nothing was edited.(mvt 501 was self proposed in migo)
what does the system want me to here ?
Thx

Hi,
Check in MIGO Transaction, what is the movement type showing GR for Goods Receipt in right side.If it is showing 501 , changed it to 101 Movement type make it Change to Default Values 101. Now you can post GR with respect to PO.
Note:
501 Movement type used for receiving goods without PO
101 Movement type used for receiving goods with respect to PO
Regards,
Biju K

Movement type without ref. to a PO

hi,
i am doing a MIGO when i do all the things it show me an error
"You cannot switch to a movement type without ref. to a PO
Message no. MIGO030
Diagnosis
You have replaced the movement type suggested with another movement type that does not refer to a purchase order.
Procedure
Make sure your entries are correct.
Choose a movement type from the list of possible entries."
please suggest what action i have to take
Regards
Maashish

Dear,
Use MB1C, and movent type 501.
this may help u
Reagrds,
Pardeep Malik

Pricing in outbound delivery without ref to sales order

Hello,
I am creating a delivery without ref to sales order. I need to do pricing in the delivery for the material sold.
1 ) I have never done the above. can someone tell what are the config steps for the same and what is the t code to create condition records (is it same as VK11 ).
2 ) secondly I need to carry the pricing in the delivery to the proform invoice created with ref to delivery. How to do the same.
regards
Pamela

Hi
1 ) I have never done the above. can someone tell what are the config steps for the same and what is the t code to create
condition records (is it same as VK11 ).
Yes You need to maintain Condition Records Through VK11 only
2 ) secondly I need to carry the pricing in the delivery to the proform invoice created with ref to delivery. How to do the same.
But i am not why you required pricing procedure in delivery , but most the cases Delivery level we required Freight Charges
At the time of Pro-forma Invoice system will pick the pricing procedure and you can check
if you still want pricing procedure in Delivery level , assign Pricing procedure to Delivery Type
Menu Path: SPRO> Logistics Execution>Shipping>Basic Shipping Functions>Pricing--->Define Pricing Procedures for Delivery
Regards,
Prasanna

Block in delivery without ref to sales order

Hi,
I want to make a delivery without ref to sales order. But I want to block it after saving it. How to do that ?
Can I assign a block at schedule line category level. Will that block the delivery ? Will this be an item block if this is possible !
regards
Sachin

Hello Sachin,
I want to make a delivery without ref to sales order. But I want to block it after saving it. How to do that ?
Use TCode VL02NO
Can I assign a block at schedule line category level. Will that block the delivery ? Will this be an item block if this is possible !
Delivery block at schedule line category level will not block deliver doc, whereas, it will not allow you to create delivery doc with reference to that sales order with delivery block.
Now for your requirement, to block a delivery doc for further processing. Maintain or select appropriate Reason for Rejection in Delivery Doc Item.
Regards
JP

Enter Counter reading in work order or time confirmation

Gurus,
Is there a way to enter a counter reading when confirming time on an operation without creating a measuring document with IK11 on a functional location ? Something that would allow a maintenance operator to enter more naturally counter readings in the system upon completing a maintenance taks.
Thanks for your insights,
Olivier

Hi
in general maintenance order is only confirmed with resources consumed.
what is need of conter reading record at the time of confirmation maintenance order. counter is connected to technical objectsif you explain in detail the purpose of recording counter reading.
any more details please...
thanks& Regads
SIVA RAMAIAH B.V.

BAPI BAPI_PR_CHANGE giving error message: Enter G/L Account

Hi Folks,
I am using bapi Enter G/L Account to add new item in existing PR number.
In return table, bapi is giving error mesage that, 'Enter G/L Account' . But i don't know where to pass the G/L number to this bapi and from where i can get the G/L number for existing PR document.
Regards
PG

Hi,
Enter the G/L account in the structure PRACCOUNT field GL_ACCOUNT. Enter the Purchase requistion item no in the field PREQ_ITEM in the structure PRACCOUNT.
Also,
Enter the Purchase requistion item no in the field PREQ_ITEM in the structure PRACCOUNTX. Set update field to 'X' in the structure PRACCOUNT field GL_ACCOUNT.
Hope it helps.
Sujay

BAPI/FM ( tran MI09) to enter count without ref. to inventory doc

Similar Messages

Maybe you are looking for