BAPI for manual reposting of primary costs

Dear all,
I would like to create a program for manual reposting of primary costs(KB11N) due to much data will be posted. Should anyone tell me is there a standard BAPI can be used?
Thanks,
Ben

HI,
see SAPNET note 737917 for the available BAPI's to post actual CO-data, guess its BAPI_ACC_PRIMARY_COSTS_POST you are looking for.
Best regards, Christian

Similar Messages

  • Program not found in ECC 6.0 for manual reposting of primary cost

    Hi exps,
    The program SAPMLK23F1 is not found in Ecc 6.0. the program SAPMK23B is replacing the program.
    now this program is using anywhere else or toally removed by sap in ecc6.0?
    is any programs which is not in ecc 6 kindly list out for me. points will be awarded.
    Raghav
    Edited by: Raghav K on Apr 29, 2009 5:20 PM

    Not answered

  • Required BAPI for CK74N Transaction - Creating Additive Costs

    Hi Experts, Good Day.
    My functional guy has given a requirement to create BDC for transaction CK74N. But as it is an 'Enjoy' Transaction I thought to opt BAPI instead of BDC. But in the forum I did not find exact BAPI for this and also found some suggestions to develop BDC for old transaction CK74.
    So, as of now I have return BDC for CK74. Here also I have a doubt. When I am executing BDC with 'N' - No-Screen mode I am getting an error like "No batch data found for this field" for some materials. This message is raised only those materials for which Costs has not maintained even for once. In this case at one screen the BDC_CURSUR is showing in some other field instead of Pricing field. So, I am getting error. But same BDC is fine with materials for those Costs has been maintained at-least one time.
    So, I hope with BAPI I can overwrite this error. Can anyone please let me know a BAPI for creating Additive Costs (CK74N).
    Regards,
    Vijay

    Vijay
    If you will pass data to above mentioned function module the SAP standard code will make sure BDC is coded in correct way. Please try to use it..Else you will have to determine via code in your BDC whether its first time or not..if first time means a new subscreen will come.
    Nabheet

  • FI Memo records - BAPI for manual delete

    Hi everybody!
    I need to delete Cash Management Memo Records manually. Does anybody know a t-code (not FF6B please) or a BAPI for doing it?
    Thanks & kind regards,
    M.

    [Finding Information in the BAPI Browser|http://help.sap.com/saphelp_46c/helpdata/en/94/a17818aeef11d2ad51080009b0fb56/content.htm]

  • BAPI for AFS BOM Creation through Cost Sheet

    Hello Experts,
    Is there any way to create the AFS BOM through BAPI.
    Client requirement is to create the automatic AFS BOM through Cost Sheet (KKE1), I already developed custom Cost Sheet as per the requirement .
    When we create the Cost Sheet Using KKE1 / ZKKE1, automatically AFS BOM should be create in the system with all grid values of component.
    I'm not getting how should I create the AFS BOM using all the components in the Cost Sheet with Grid values.
    There is no issue in creation of simple BOM using Bapi but for AFS BOM I'm facing problem.
    Please suggest and also tell the possibility.
    Thanks & Regards
    Prajyot.D

    Hi!  Thanks for your help.  I used CS_BI_BOM_CREATE_BATCH_INPUT1 and was able to create the BOMs successfully.  My problem now is on the change.  I tried using CS_BI_BOM_CHANGE_BATCH_INPUT but I kept running into various errors.  I think it has something to do with the fields that I am populating in the structures and tables that are being passed to the BAPI.  I tried researching for CS_BI_BOM_CHANGE_BATCH_INPUT but could not find any match.  The function module documentation is not available as well.  If you have used this FM in the past, will appreciate if you could share some inputs on how you were able to make this work.  Thanks a lot!

  • Need BAPI for G/L balance By cost center

    Hi all ,
    i need a bapi or function module that returns G/L balance in  a given cost center (s) .
    so is there any thing like this in SAP  .
    thanks

    Hi Seshu ,
    this may be another solution but i need some thing like BAPI_GL_ACC_GETPERIODBALANCES
    but with specific Cost center , because the calculation of every single transaction that happens in a certain GL / CC will consume a lot of time .
    is there a BAPI like this ??
    Thanks

  • Function modules or BAPI for posting plan costs for WBS Element

    Hi all,
    Does anyone know, whether there exists a function module or BAPI for posting plan costs to a WBS Element? K_COSTS_PLAN_PS does not work, because RKP1 is not allowed.
    Greetings

    check
    BAPI_COSTACTPLN_POSTACTINPUT   Activity Input Planning: Posting                
    BAPI_COSTACTPLN_POSTACTOUTPUT  Activity/Price Planning: Posting                
    BAPI_COSTACTPLN_POSTKEYFIGURE  Stat. Key Figure Planning: Postings             
    BAPI_COSTACTPLN_POSTPRIMCOST   Primary Cost Planning: Postings                 
    BAPI_PDTRANSCO_POSTPRIMCOST    Transfer of Planning Data: Post Primary Costs   
    K40C                           CO Actual Postings, Manual                      
    BAPI_ACC_PRIMARY_COSTS_POST    Accounting: Post Primary Costs                  
    BAPI_COPAACTUALS_POSTCOSTDATA  BAPI Operating Concern: Post Costing-Based Actua
    BAPI_PRIM_COST_CHECK_AND_POST  Primary Costs: Formal Parameter Check           
    S@meer

  • Function modules or BAPI for deleting plan costs on a cost center

    Hi all,
    I search for a function module or bapi to delete plan costs / activity on a cost center.
    At the moment I update the planning with 0, but that cause a mass of needles entries on the cost centers.
    For check and posting I use the function group 6026 - BAPI_COSTACTPLN_* ,
    but there is no function for deleting.
    Has anyone an idea?
    Thx for help - points as reward !

    check
    BAPI_COSTACTPLN_POSTACTINPUT   Activity Input Planning: Posting                
    BAPI_COSTACTPLN_POSTACTOUTPUT  Activity/Price Planning: Posting                
    BAPI_COSTACTPLN_POSTKEYFIGURE  Stat. Key Figure Planning: Postings             
    BAPI_COSTACTPLN_POSTPRIMCOST   Primary Cost Planning: Postings                 
    BAPI_PDTRANSCO_POSTPRIMCOST    Transfer of Planning Data: Post Primary Costs   
    K40C                           CO Actual Postings, Manual                      
    BAPI_ACC_PRIMARY_COSTS_POST    Accounting: Post Primary Costs                  
    BAPI_COPAACTUALS_POSTCOSTDATA  BAPI Operating Concern: Post Costing-Based Actua
    BAPI_PRIM_COST_CHECK_AND_POST  Primary Costs: Formal Parameter Check           
    S@meer

  • Msg. error BK048 for manual cost allocation

    Hi,
    we got a warning message for manual cost allocation (KB15N), when posting this allocation just with a quantity and without an amount. We would like to post this allocation without amount and therefore need to change the message type from warning (W) to information (I), to do this posting.
    When using transaction OBA5, there is just a fixed and not adjustable value for Standard with "W". Do you know any workarounds or how we can change this message type to do this posting?
    Regards
    Florian

    Hi Florian,
    HAve you assigned users in OBA5?.
    Go to OBMSG, for this particular Message number in the allowed message types, specify IWE etc. In the standard column specify I. Also you could check on check box "Switch Off" if you want to have the option of not seeing the message at all.
    Now goto OBA5, against the message number, in the "Online" column , specify I or - (Switch Off) and do the same in the BAtchl column also.
    Now you need too specify a user only if you want this change for specific users , if you want all the users to be able to post manual cost allocation then do not specify any user name.
    Do tell me if it works.
    Regards
    Susan

  • Very Urgent : 'BAPI for CK74n in ECC 6.0 for crating the cost estimates'

    Hi guys,
    i am working in the upgradation project from 4.5b to ecc 6.0
    in 4.5b we have the tcode ck71 for cost estimates
    the respective tcode in ecc 6.0 is CK74N
    I want BAPI for tcode CK74N to upload the data
    can you please help me to find out the respective BAPI
    Thanks
    Ramesh

    Hi guys,
    i am working in the upgradation project from 4.5b to ecc 6.0
    in 4.5b we have the tcode ck71 for cost estimates
    the respective tcode in ecc 6.0 is CK74N
    I want BAPI for tcode CK74N to upload the data
    can you please help me to find out the respective BAPI
    Thanks
    Ramesh

  • BAPI for  ""Change Cost Element / Activity Input Planning ""

    Hi
    Is there any BAPI for  ""Change Cost Element / Activity Input Planning "" ( TC KP06) as there is BDC for that but is goes through lot of steps . ( TC OKKS, KP04, KP06 )
    So if any one know the BAPI for the same please let me know,  and if possible send me your code also it will be really help full.
    Regards

    o   OBJECT_INDEX - Index uniquely identifying the row and thus the           
        object. The index must be greater than zero and may only appear once     
        in the table. If the index does not exist in INDEXSTRUCTURE, the row     
        is ignored.                                                                               
    o   COSTCENTER    - Cost center that includes the activity.                                                                               
    o   ACTTYPE       - Activity type that includes the activity. You must       
        fill this together with COSTCENTER. You only need it for an activity     
        input that is activity-dependent.                                                                               
    o   CO_BUSPROC - Business process that includes the activity.                                                                               
    o   ORDERID       - Order that includes the activity.                                                                               
    o   WBS_ELEMENT  - WBS element that includes the activity                                                                               
    You may fill one object only,for example COSTCENTER, CO_BUSPROC,             
    ORDERID, or WBS_ELEMENT.                                                     

  • Manual Reposting of Costs (KB11N) does not update Profit Center

    When I do Manual Reposting of Costs on KB11N, the system does not update the Profit center with the value but it does update the Cost center.
    Please Help
    Thanks,
    Sindane

    Hi,
    Please check whether sender as well as receiver cost object is assigned to profit center. If this is done PCA document gets generated and update is made in respective Profit center.
    Bye,
    Ramesh

  • Required BAPI for Shipment Cost Document (VI01)

    Dear All,
       I required BAPI for Shipment Cost Document (VI01), pls help on this.
    Regards
    Ranjit

    Dear MM
      Thanx for replying, but the BAPI which you have provided will only show me the Cost with correct Tax calculation,
    But its not getting created, which system should show the Shipment Cost Document number.
    Regards
    Ranjit

  • BAPI for cost centre create/change

    Hi,
    Is there a BAPI for Cost centre create and change?
    Thanks in advance.
    Regards,
    Arun Mohan

    Hi Ravi,
    My system is 4.6B.
    I found BAPI_COSTCENTER_CREATEMULTIPLE,
    but the BAPI for CC change is not present.
    Is there any other BAPI for CC change?
    Arun

  • BAPI for Moving average cost

    Dear Experts,
    I need a bapi to get the moving average cost for a material. in addition i need another bapi  to get the material availability in all plants something like mmbe.
    please help me.

    Hi Ebrahime,
    You can have a look at MARA, MARC, MARD and MBEW..
    MBEW-VERPR ==> Moving Average Price
    MBEW-LBKUM ==> Total Stock
    Hope it will solve your problem..
    Thanks & Regards
    ilesh 24x7
    ilesh Nandaniya

Maybe you are looking for