BAPI_INCOMINGINVOICE_CREATE - a rolling back errors question
I need to use this BAPI to create an invoice and a credit memo against the same purchase order in one 'hit'. If the second call to the BAPI fails, I want to rollback both sets of changes. IIt's been fixed in my mind for a while now that this is not possible.; that if you call this BAPI you have to complete the process by committing or rolling back the changes before calling it a second time. However, I've done a bit of testing and doing the commit / rollback after the second call seems to be working fine.
Has anyone else done this sort of thing successfully in Production? I don't want to tell them that it is possible and make them really happy and then find out that I was wrong.
I have a similar scenario with BAPI_ACC_DOCUMENT_POST, where two or even four postings need to be made successfully or none at all. The rollback is actually a very rare case in production, but it was tested quite a bit beforehand with forced errors and always worked as desired.
As you know, it works only as long as the BAPI does not have a commit work inside (they should not if programmed properly).
Thomas
Similar Messages
-
Unable to install AppleMobileDevise.Rolling back -- Errors before AMDS could be configured.
Unable to install AppleMobileDevise.Rolling back --> Message : Errors before AMDS could be configured.
"the installer encountered errors before iTunes could be configured".
That message sometimes comes at the end of a chain of error messages? If you get earlier error messages prior to that one, could you let us know what the earlier errors say, please? -
Receiving 'OracleException ORA-24761: transaction rolled back errors
Hi all,
I am receiving the above error intermittently in our .NET application. The .NET apps makes heavy use of txns (using COM+), Oracle services for MTS, ODP.NET and is talking to a 9205 db.
We have tried several combinations of timeout settings in DB and .NET sides (to no avail).
Any suggestions why this error could be happening?
Rgds,
PrasannaI enabled ODP tracing but don't know what to look for. The trace files quickly grow to 100+ MB. Searched for strings error/fail/24761/(MTS)/back but couldn't find any useful information.
Successful calls seem to start with:
TIME:2003/ 3/10- 9:24:10:140 TID: cc4 (MTS) Enlistment result: 0
Thanks,
Armin -
I'm a technical user of Macs,Windows machines. Attempting to install the above software on a new Surface Pro3, Win8.1. I'm setup as an administrator (only user) I've attempted about 2hrs worth of attempted loads with the same error. I've attempted all forum items, shut off Win Defender, changed admins, deleted PDAppflex.swf and PDAppflex-app.xml, all useless attempts. I get the feeling, I've wasted $$, appears this is a rampant wide problem. I can't even imagine if others are going through this.
Blairjamel please see Install rollback and Shared Technologies | Windows for information on how to resolve your current error.
-
Hi,
I have a problem. I am using JSF1.1, EJB2.x, JDBC and weblogic8.1sp6. the structure of the application is like this, jsf bean calls facade bean(which is stateless session bean) method. facade bean method calls dao method to perform database insert/updates. the trasaction attribute of facadebean's method is set to required in ejb-jar.xml.
now I create connection in the dao method and pass that to further dao methods. I have connection.setAutoCommit(false) in the dao methods. Problem is that in case of exception, rollback is not working. whatever updates are performed before the exception, get commited to the database, whether I specify rollback in the catch block or not. If I rollback in the dao method, I get the following exception when trying to rollback.
can anyone help me please?
here are my methods
==============FACADE===================================
public void edit(AuditData audit_data, ApplicationVo p_vo)
throws appException {
try {
this.getDao().edit(audit_data, p_vo, null);
} catch (appException e) {
throw e;
===================== DAO METHOD =================================
public void edit(AuditData audit_data, ApplicationVo p_vo, Connection c)
throws appException {
boolean connectionNull = false;
if (c == null) {
c = this.getConnection();
connectionNull = true;
try {
c.setAutoCommit(false);
} catch (SQLException e) {
throw new appException("edit: SQLException in connection setAutoCommit. "+ e.getMessage(), e);
try {
//perform some other update/insert/delete operations on a list in applicationVO
/*......loop over list
//then audit the changes, audit method also has the same structure.
this.audit(audit_data, c);
} catch (SQLException e) {
appLogger.error("edit:SQLException editing Atttributes " + e, e);
try {
c.rollback();
} catch (SQLException se) {
se.printStackTrace();
appLogger.error("edit: SQLException in connection rollback. " + e.getMessage(), e);
throw new appException("edit: SQLException in connection rollback. "+ e.getMessage(), e);
throw new appException("edit: SQLException. " + e.getMessage(), e);
} catch (appException e) {
appLogger.error("edit:SQLException editing Atttributes " + e, e);
try {
c.rollback();
} catch (SQLException se) {
se.printStackTrace();
appLogger.error("edit: SQLException in connection rollback. " + e.getMessage(), e);
throw new appException("edit: SQLException in connection rollback. "+ e.getMessage(), e);
throw e;
} finally {
try{
if (connectionNull && (c != null)) {
c.close();
} catch (SQLException e) {
appLogger.error("edit:SQLException closing Connection.PreparedStatement. ErrorCode: "
+ e.getErrorCode() + " SQLState: " + e.getSQLState() + " Message: " + e.getMessage(), e);
============================================ EXCEPTION ======================
java.sql.SQLException: Cannot call Connection.rollback in distributed transaction. Transaction Manager will commit the resource manager when the distributed transaction is committed.
at weblogic.jdbc.wrapper.JTSConnection.rollback(JTSConnection.java:704)
at com.sss.app.dao.OracleItemHelper.edit(OracleItemHelper.java:572)
at com.sss.app.dao.OracleItemHelper.edit(OracleItemHelper.java:548)
at com.sss.app.admin.facade.FacadeSession.edit(FacadeSession.java:573)
at com.sss.app.admin.facade.Facade_r1e6m6_ELOImpl.edit(Facade_r1e6m6_ELOImpl.java:1015)
at com.sss.app.admin.bean.BusinessDelegateBean.edit(BusinessDelegateBean.java:937)
at com.sss.app.admin.bean.AssetAppsBean.edit(AssetAppsBean.java:152)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.myfaces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:132)
at org.apache.myfaces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:61)
at javax.faces.component.UICommand.broadcast(UICommand.java:109)
at org.ajax4jsf.framework.ajax.AjaxViewRoot.processEvents(AjaxViewRoot.java:180)
at org.ajax4jsf.framework.ajax.AjaxViewRoot.broadcastEvents(AjaxViewRoot.java:158)
at org.ajax4jsf.framework.ajax.AjaxViewRoot.processDecodes(AjaxViewRoot.java:274)
at org.apache.myfaces.lifecycle.ApplyRequestValuesExecutor.execute(ApplyRequestValuesExecutor.java:32)
at org.apache.myfaces.lifecycle.LifecycleImpl.executePhase(LifecycleImpl.java:95)
at org.apache.myfaces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:70)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:139)
at org.apache.myfaces.webapp.MyFacesServlet.service(MyFacesServlet.java:77)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1077)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:465)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at org.apache.myfaces.webapp.filter.ExtensionsFilter.doFilter(ExtensionsFilter.java:97)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at org.ajax4jsf.framework.ajax.xmlfilter.BaseXMLFilter.doXmlFilter(BaseXMLFilter.java:127)
at org.ajax4jsf.framework.ajax.xmlfilter.BaseFilter.doFilter(BaseFilter.java:277)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at org.apache.myfaces.webapp.filter.ExtensionsFilter.doFilter(ExtensionsFilter.java:144)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:7053)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3902)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2773)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
===============================================================Nitin Deshmukh wrote:
Hi,
I have a problem. I am using JSF1.1, EJB2.x, JDBC and weblogic8.1sp6. the structure of the application is like this, jsf bean calls facade bean(which is stateless session bean) method. facade bean method calls dao method to perform database insert/updates. the trasaction attribute of facadebean's method is set to required in ejb-jar.xml.
now I create connection in the dao method and pass that to further dao methods. I have connection.setAutoCommit(false) in the dao methods. Problem is that in case of exception, rollback is not working. whatever updates are performed before the exception, get commited to the database, whether I specify rollback in the catch block or not. If I rollback in the dao method, I get the following exception when trying to rollback.
can anyone help me please? You are doing a JTA transaction. WLS is managing it. Don't do anything to the
connection that has anything to do with transactions (no setAutoCommit() calls,
and no commit/rollback calls). If you want to affect the transaction, get access
to the transaction object directly and set rollback-only.
here are my methods
==============FACADE===================================
public void edit(AuditData audit_data, ApplicationVo p_vo)
throws appException {
try {
this.getDao().edit(audit_data, p_vo, null);
} catch (appException e) {
throw e;
===================== DAO METHOD =================================
public void edit(AuditData audit_data, ApplicationVo p_vo, Connection c)
throws appException {
boolean connectionNull = false;
if (c == null) {
c = this.getConnection();
connectionNull = true;
try {
c.setAutoCommit(false);
} catch (SQLException e) {
throw new appException("edit: SQLException in connection setAutoCommit. "+ e.getMessage(), e);
try {
//perform some other update/insert/delete operations on a list in applicationVO
/*......loop over list
//then audit the changes, audit method also has the same structure.
this.audit(audit_data, c);
} catch (SQLException e) {
appLogger.error("edit:SQLException editing Atttributes " + e, e);
try {
c.rollback();
} catch (SQLException se) {
se.printStackTrace();
appLogger.error("edit: SQLException in connection rollback. " + e.getMessage(), e);
throw new appException("edit: SQLException in connection rollback. "+ e.getMessage(), e);
throw new appException("edit: SQLException. " + e.getMessage(), e);
} catch (appException e) {
appLogger.error("edit:SQLException editing Atttributes " + e, e);
try {
c.rollback();
} catch (SQLException se) {
se.printStackTrace();
appLogger.error("edit: SQLException in connection rollback. " + e.getMessage(), e);
throw new appException("edit: SQLException in connection rollback. "+ e.getMessage(), e);
throw e;
} finally {
try{
if (connectionNull && (c != null)) {
c.close();
} catch (SQLException e) {
appLogger.error("edit:SQLException closing Connection.PreparedStatement. ErrorCode: "
+ e.getErrorCode() + " SQLState: " + e.getSQLState() + " Message: " + e.getMessage(), e);
============================================ EXCEPTION ======================
java.sql.SQLException: Cannot call Connection.rollback in distributed transaction. Transaction Manager will commit the resource manager when the distributed transaction is committed.
at weblogic.jdbc.wrapper.JTSConnection.rollback(JTSConnection.java:704)
at com.sss.app.dao.OracleItemHelper.edit(OracleItemHelper.java:572)
at com.sss.app.dao.OracleItemHelper.edit(OracleItemHelper.java:548)
at com.sss.app.admin.facade.FacadeSession.edit(FacadeSession.java:573)
at com.sss.app.admin.facade.Facade_r1e6m6_ELOImpl.edit(Facade_r1e6m6_ELOImpl.java:1015)
at com.sss.app.admin.bean.BusinessDelegateBean.edit(BusinessDelegateBean.java:937)
at com.sss.app.admin.bean.AssetAppsBean.edit(AssetAppsBean.java:152)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.myfaces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:132)
at org.apache.myfaces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:61)
at javax.faces.component.UICommand.broadcast(UICommand.java:109)
at org.ajax4jsf.framework.ajax.AjaxViewRoot.processEvents(AjaxViewRoot.java:180)
at org.ajax4jsf.framework.ajax.AjaxViewRoot.broadcastEvents(AjaxViewRoot.java:158)
at org.ajax4jsf.framework.ajax.AjaxViewRoot.processDecodes(AjaxViewRoot.java:274)
at org.apache.myfaces.lifecycle.ApplyRequestValuesExecutor.execute(ApplyRequestValuesExecutor.java:32)
at org.apache.myfaces.lifecycle.LifecycleImpl.executePhase(LifecycleImpl.java:95)
at org.apache.myfaces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:70)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:139)
at org.apache.myfaces.webapp.MyFacesServlet.service(MyFacesServlet.java:77)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1077)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:465)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at org.apache.myfaces.webapp.filter.ExtensionsFilter.doFilter(ExtensionsFilter.java:97)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at org.ajax4jsf.framework.ajax.xmlfilter.BaseXMLFilter.doXmlFilter(BaseXMLFilter.java:127)
at org.ajax4jsf.framework.ajax.xmlfilter.BaseFilter.doFilter(BaseFilter.java:277)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at org.apache.myfaces.webapp.filter.ExtensionsFilter.doFilter(ExtensionsFilter.java:144)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:7053)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3902)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2773)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
=============================================================== -
Photoshop 12 error 1935 roll back
I have received the error 1935 the roll back error in windows for photoshop 12 I have tried to resolve it but the file 00BE does not show on the C: drive
Hi Chrisvgr,
Thanks for posting on Adobe forums.
Please try steps written in the doc :
http://helpx.adobe.com/creative-suite/kb/error-1935-assembly-component-microsoft.html
for more information about the error Please check this document from Microsoft:
http://support.microsoft.com/kb/926804
Thanks
Sandeep -
Hello,
I have used elements 9 many times, but when I tried to use it today both photoshop elements and all my adobe ver 7 and 9 came up with asking me to accept the license agreement. I did and it would not open any program in adobe except CS2, Acrobat 8 and Adobe reader.
I tried to install ver 9 and it would not or at least it still shows up in windows uninstall, but when you try to uninstall it say the program does not exist.
I tried to install ver 9 and it always rolled back the install. I do have the log file, but I do not understand what it is telling me.
Help would be appreciated.Hi Larry,
[email protected] wrote:
Yes I tried the ASA and had looked at the second link before and I just don't see where it would lead me. At the end where the summary is it shows no errors, but I don't know if that means no roll back errors or what?
The second link to the Adobe document leads you to looking through the entire installation log for "Return code: 3" listings and how to search the Adobe Knowlege base for clues about that specific error. That's a good question about the error summary -- the body of the log would have more specific details about what is happening in the entire process.
[email protected] wrote:
Do you or another person in the forum have knowledge of what the log is saying.
I haven't used the installation log to troubleshoot problems, so all I can say is what the Adobe document says: the log will show failed installation components so one can do further research on the cause of that component failing.
[email protected] wrote:
I still have PSE 9 and PRE 9 and PRE 7 Templates showing in Control Panel...Programs window, but when you try to remove them it says "This action is only valid for products that are currently installed".
That's the part that bothers me the most, because it suggests a larger system problem. If you've already used the MS Fixit utility:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
and still have those invalid entries, I'm afraid that the system is corrupted and that is what's causing your PSE installation problem.
My approach would be to first get the system problem sorted out, instead of possibly wasting a lot of time in the details of the PSE installation log.
Ken -
Once Again: Transaction is not rolled back...
Hi all,
I'm almost at the end of my project with Toplink. but I have to solve this transaction rollback problem. Here is my previous message. any comment is more than welcome.
The problem is this, I pass 2 objects to Toplink to update in database using activeUnitOfWork.shallowMergeClone() method.
one of the updates fails then I expect everything to be rolled back within the same unitofwork. but NOT. the other object is quite well updated in database even though they are merged in the same unit of work... please HELP...
here is the log :
UnitOfWork(31228)--JTS#beforeCompletion()
UnitOfWork(31228)--#executeQuery(WriteObjectQuery(com.vnu.publitec.axis.persistence.Parameters@7a0b))
UnitOfWork(31228)--Connection(31249)--UPDATE PARAMETERS SET PARAM_VALUE = '26' WHERE (PARAM_NAME = 'TEST_PARAMETER_2')
UnitOfWork(31228)--#reconnecting to external connection pool
UnitOfWork(31228)--#executeQuery(WriteObjectQuery(com.vnu.publitec.axis.persistence.Parameters@7a06))
UnitOfWork(31228)--Connection(31249)--UPDATE PARAMETERS SET PARAM_MAX_SIZE = 666666, PARAM_COMMENTS = 'updated by new axis...', PARAM_VALUE = '18' WHERE (PARAM_NAME = 'TEST_PARAMETER_1')
UnitOfWork(31228)--EXCEPTION [TOPLINK-4002] (TopLink - 9.0.3 (Build 423)): oracle.toplink.exceptions.DatabaseException
EXCEPTION DESCRIPTION: java.sql.SQLException: ORA-01438: value larger than specified precision allows for this column
INTERNAL EXCEPTION: java.sql.SQLException: ORA-01438: value larger than specified precision allows for this column
...... //some more message
UnitOfWork(31228)--JTS#afterCompletion()
UnitOfWork(31228)--release unit of work
ClientSession(31229)--client released
environment information is :
J2EE Server is Oracle9iAS (9.0.3.0.0) Containers for J2EE
and following is a piece of sessions.xml file related to external transaction controller settings :
<session-type>
<server-session/>
</session-type>
<login>
<datasource>java:comp/env/jdbc/xxx</datasource>
<uses-native-sql>true</uses-native-sql>
<uses-external-transaction-controller>true</uses-external-transaction-controller>
<uses-external-connection-pool>true</uses-external-connection-pool>
</login>
<external-transaction-controller-class>oracle.toplink.jts.oracle9i.Oracle9iJTSExternalTransactionController</external-transaction-controller-class>
thanks
Erdem.Hi James,
As Erdem is not available, I am now taking care of the issue. The datasource name in session.xml refers to the one defined in OC4J data-sources.xml "ejb-location" attribute of "data-source" element. Below, I attach the relevant sections of both files
session.xml
<session>
<name>Axis_session</name>
<project-xml>AxisCDM.xml</project-xml>
<session-type>
<server-session/>
</session-type>
<login>
<datasource>java:comp/env/jdbc/AXIS_323DS</datasource>
<uses-native-sql>true</uses-native-sql>
<uses-external-transaction-controller>true</uses-external-transaction-controller>
<uses-external-connection-pool>true</uses-external-connection-pool>
</login>
<external-transaction-controller-class>oracle.toplink.jts.oracle9i.Oracle9iJTSExternalTransactionController</external-transaction-controller-class>
data-sources.xml:
<data-source
class="com.evermind.sql.DriverManagerDataSource"
name="AXIS_323DS"
location="jdbc/AXIS_323CoreDS"
xa-location="jdbc/xa/AXIS_323XADS"
ejb-location="jdbc/AXIS_323DS"
connection-driver="oracle.jdbc.driver.OracleDriver"
username="XXX"
password="XXX"
url="jdbc:oracle:oci8:@ddb"
inactivity-timeout="30"
connection-retry-interval="1"
/>
On the client we get the following exception:
com.evermind.server.rmi.OrionRemoteException: Transaction was rolled back: Error in transaction: EXCEPTION [TOPLINK-4002] (TopLink - 9.0.3 (Build 423)): oracle.toplink.exceptions.DatabaseException
EXCEPTION DESCRIPTION: java.sql.SQLException: ORA-01438: value larger than specified precision allows for this column
On the server, we have implemented SessionSynchronization to monitor the transaction. afterCompletion method gets a boolean value "true" indicating that the transaction was comitted.
Any database operation that was successful before the erroneous case was saved in DB.
Thanks,
Melih -
From the specification I know that when an instruction is a long-delay operation the instructions behind will be roll back, the question is how the queue of the thread recover?
for example, when encounter a store instruction, the instructions in E and D stage of the pipeline will be roll back, but the very instruction stay in the M stage, when the memory acess operation finish, how the schedualer recover the instruction queue?
Any comment is welcome, thanksAs I understand the documentation, a thread will roll back and (if the instruction in flight is a long latency instruction or a resource conflict) go to a Wait (not-ready-to-issue) state. The rolled-back instructions will not re-issue until their input conditions are resolved. Remember that the F and S stages (where the instructions are rolled back to) are Fetch and Thread Selection, so this is before instructions are picked from any of the threads on the core and before they are decoded. The in-flight instruction will continue from the M stage when the memory operation completes.
Also, I think the rollback condition caused a store operation only happens when the store buffer is full, not on all store operations.
Jeremy -
itunes 64 bit on windows 7 is unable to install, i have the 64 bit installer version but it keeps saying "errors occurred" at the ( rolling back ) phase. HELP!!!
I have the answer and this might be useful for any one else wondering about this in the future. If it helped you or explained what you wanted to know. Replay to the post pls
It's quite easy actually. First have your "iTunes Library Extras", "iTunes Library Genius", "iTunes Library", and "iTunes Music Library" backed up. Download ans install iTunes 64-bit. I don't know what's so 64-bit about iTunes 64 since Win7 reports it as a 32-bit application in the task manager. But anyway. Install iTunes 64 and launch it. If you migrated your library to another drive like me go to settings in iTunes and change the directory to your location. Close iTunes. Replace the newly created files with your backed up files. Launch iTunes. iTunes will load and then update your library and from there you are set to go! so basically it is just like a normal upgrade. But if you hesitated to go from 32 to 64 like me, here is your answer.
By the way. I'm using Windows 7 64-bit with iTunes 64-bit and it works without problems and syncing with my iPod Touch also works flawlessly. -
I have a Windows 7 OS 64 bit, ZT desktopcomputer with 16meg memory. I have not been able to install any updates
to itunes to my computer. It downloads, but then when installing, it looks like it is going to complete the install
and then it rolls back and says the errors occured and to try again. I have a win7 64bit HP Laptop that installed
the itune updates with no problem. I have to sync my iphone to my Laptop as it will not work with my desktop.
Please advise.
Thanks,
RogerDo you have any other drive connected, which has a copy of FCP X?
I would make a copy of the application in some drive, just in case; then disconnect the drive, delete the application (could use FCS Remover to delete everything related).
Then, try installing from the purchases tab in the App Store. -
Error message after downloading and install rolled back (using up data limit)
error message after completing install of trial. then program was rolled back. I do not appreciate using up data allotment unnecesarily, people.Thanks for any assistance.
Rhumsike which Adobe software or service are you trying to install? Also which operating system are you using? Finally what is the error message which you are receiving?
-
When I install itunes on my XP sp3 system I get a network error while reading from itunes.msi. Then rolls back. any thoughts?
When I install itunes on my XP sp3 system I get a network error while reading from itunes.msi.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Installing lates itunes version to my Windows 7 g4 bit laptop but i always come accross with the error ???????? in the middle of installation. Then it will roll back everything and wont install at all
What does the error message say? Precise text, please.
-
everytime i try to download itunes it says rolling back action and error . i dont know what to do please help . P.S. i have windows 8
Hello there Unicornbarf534,
Thank you for using Apple Support Communities.
It sounds like you are unable to successfully install iTunes. I recommend the troubleshooting instructions in this article named:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Here is a general outline of where the troubleshooting will take you:
General installation troubleshooting
1. Empty your Temp directory and restart
2. Completely remove iTunes and related components
3. Install the latest version of iTunes
Additional troubleshooting
After performing each of the steps below, you will need to completely remove iTunes and related components and then install iTunes again to determine whether the issue is resolved.
1. Make sure you have administrator account access
2. Make sure your folder names don't contain strange characters
3. Get the latest Windows updates
4. Disable other conflicting software
Additional Information
If you only need to install QuickTime, or if iTunes installs but QuickTime installation did not complete
Try downloading and installing the standalone version of QuickTime from http://www.apple.com/quicktime/download/. Be sure you download the version that does not include iTunes.
If the steps outlined in this article don't help, you may be able to find a solution to your issue by searching the Microsoft support website.
All the best,
Sterling
Maybe you are looking for
-
Error_Create Load table on target_NZ
Hi, Following is the error I am encountering while executing a procedure of KM which is a test version:- KM_KIM MSSQL to Netezza (bcp-nzload) V4.xml. The procedure is run on Netezza Server. Procedure command reads as follows: create table <%=snpRef.g
-
Need help with my applet. I am new to applets...Please help..please...
Here is one method from the class: public void update(Graphics g) { Dimension d = size(); int w = sky.getWidth(this); int h = sky.getHeight(this); // If we've loaded the moving image, draw it.
-
Get value of changed field of create_decision_popup window in lineedit mode
Hi there, i'm calling a create_decision_popup popup in lineedit mode. So i could edit the values of the selected line. How could i acces the value of the changed fields after closing the popup window in the event_sel event. Here my code: v_popup = co
-
Scroll left, right, up and down?
I like to have a single page site were you can scroll left, right, up and down. So the first thing you see when you open the site has to be the middle of the page. Is this possible?
-
'Error when generating the selection screen "0500"
Dear all, I have copied a function group QEES to ZQEES through SE80. In that I have copied all screens, includes, function modules etc.. Now when I activate the ZQEES, I get an error 'Error when generating the selection screen "0500" of report "SAPLZ