BAPI_INSPOPER_GETDETAIL error: Operation not unique

I already post this in QM forum but i think now if you check the update is a ABAP question too so i repost this here too
sorry if is not.
Hello i not sure if this is the right place for this question because the abap subject of it , but my problem is not a abap i think is more a pure QM config/master data issue but i not a QM expert ( just abaper ) and i need some hints.
i am trying use the FM BAPI_INSPOPER_GETDETAIL i pass the lot number and the operation lot number but i get a error tell me
that the operation for that lot is not unique when i check the matchcode ( searchhelp ) in the QE11 of this lote ins true i can see 2
operation BUT WITH THE SAME NUMBER !! , but one is mark like not relevant for insp ( grey square ) and other is relevent for inps ( yellow triangle ) even with the FM BAPI_INSPLOT_GETOPERATIONS i get 2 operation with the same number but not the same WORKCENT. i think this is not a right config of QM but not sure , what i can look for solve this ? is right have 2 operation with the same number but dif WORKCENT one relevant and another not for inps ?
Thanks.
update: i check this other operation is a overhead operation add by the PP people , how i can handle this ? how i can make this irrelevant for use the BAPI ?

i change the operation number for the pararell sequence and now work

Similar Messages

Trouble uploading to shootproof, keep getting an error that says "internal error, name not unique, color" any idea what this is and how to resolve it?

trouble uploading to shootproof, keep getting an error that says "internal error, name not unique, color" any idea what this is and how to resolve it?

Note that you should be cautious when you get the 'untrusted' error message and that you should never create a permanent exception in cases like this without investigating the cause.
If you have created a permanent exception then best is to remove it in the Server tab in the Certificate Manager.
*Tools > Options > Advanced > Certificates/Encryption: View Certificates

Export PDF Error - Operation Not Yet Implemented

Dear All,
i am trying to export a crystal report to pdf and it is ending in following error:
Error
Error in File CrystalReportTestBlankReport {D781AF0B-642B-4FB5-BC4B-F05D5934DA2F}.rpt: Operation not yet implemented.
You may test yourself at here : [http://esolutionscurry.co.in/crystalreporttestpage.aspx|http://esolutionscurry.co.in/crystalreporttestpage.aspx]
Please note there are no issues in opening report and exporting to word, rtf and excel. Just PDF export is not working.
My Server Configuration is : windows server 2008 R2 Standard, Dot Net Framework 4 and Plesk Parallel 10.3
I have installed Crystal report 13 (the one that is available for use with Visual Studio 2010)
I am able to export the report from within the Visual Studio Localhost, but this fails in IIS.
Please help.. this issue is killing me everyday.
Thanks in advance..
Regards,
Ankit Singhal

Hello, I had a similar problem, and finally, thanks to this thread I could find the solution.
In development enviroment the application worked, but in production it didn't work (W2k8 with IIS 7 and MVC3 with Crystal Reports 11). When I tried to generate a pdf document I got the error:
Operation not yet implemented.
I tried to solve the trouble by reading a lot of information about CR. I discarded troubles with the font, so I focused in the temp dir in CR. I wanted to avoid give permissons to the application user to the windows temp dir.
Finally I found out there's a registry key that can change the temp directory in CR:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Report Application Server\InprocServer\TempDir
I have an x64 OS, so in the x86, it should be
HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Report Application Server\InprocServer\TempDir
This key doesn't exist by default. I created this with the value: D:\CRTemp, but I keep the same error, but I could check that when I generated the reports, some files appeared in that directory.
So my research continued. Thanks to your advices, I used the Process Monitor to see what was happening, so I could see the real problem. It was that the CR was trying to read a file called D:\CRTEMPReport{.....}.rpt.
So I changed the Key, with a final backslash (D:\CRTemp\). When I changed that, everything worked fine, using that new key.
Maybe my experience can help people with similar troubles.
Thanks for your advices Ludek.

Ln -s on a NAS device gives - Operation Not Permitted

Hi,
I am installing Oracle Database on a NAS mounted drive and the installation fails.
The reason is I am not able to create softlinks on the drive.
ln -s a b
gives the error : Operation Not permitted.
I use the following mount command to mount the NAS
mount -t smbfs //machine/share /share username=oracle,password=oracle
Thanks
Anil

mount -t smbfs //machine/share /share username=oracle,password=oracleWhich user has executed this command?
In case it was "root" (I belive that) then only root can create that symlink.

Getting "Operation not permitted" on a launch agent

Hi,
I just recently upgraded to OS X Mavericks (10.9.1) from 10.7.5. Previously, I had this plist file in my /Library/LaunchDaemons directory …
          <?xml version="1.0" encoding="UTF-8"?>
          <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
          <plist version="1.0">
          <dict>
                  <key>Disabled</key>
                  <false/>
                  <key>Label</key>
                  <string>MemCache</string>
                  <key>ProgramArguments</key>
                  <array>
                          <string>sudo</string>
                          <string>-u</string>
                          <string>davea</string>
                          <string>memcached</string>
                          <string>-vvv</string>
                          <string>></string>
                          <string>/Users/davea/memcached.log</string>
                          <string>2>&1</string>
                  </array>
                  <key>RunAtLoad</key>
                  <true/>
          </dict>
          </plist>
everything was working fine before the upgrade, but after the upgrade, the process fails to start with the error, “Operation not permitted. An attempt was made to perform an operation limited to processes with appropriate privileges or to the owner of a file or other resources.”
What do I need to do differently above to heal the pain?
Thanks, -

The interpreter is the thing that comes after "#!"; in your case, /bin/bash. Are you able to open a shell in Terminal? If so, what is your shell, and what do you get from
ls -Oel /bin/bash
and
codesign -vv /bin/bash

NFS: Operation not applicable

hi,
when i try to share a file i get this error: Operation not applicable
i did this:
# share -f nfs -o ro /home/myfiles/ftp1
and i have put it in the /etc/dfs/dfstab
what might be the problem???
um connected as root telnet, is this the problem!!
thanks.

Hello.
The problem could be the "/home" directory.
Under Solaris "/home" is a very special directory which maps different home directories. For example: In a network installation if your home directory lies on a server and you log in Solaris will mount the server's home disk and map your NFS home directory to /home/netuser.
It's important to know that Solaris will remove /home/netuser when you log out so that the /home directory is EMPTY whenever there is no user logged in.
Try to share the REAL home directory (if you have a "normal" installation this will be "/export/home/myfiles/ftp1").
I hope this helps.
Martin

[SOLVED] ALSA equal "Operation not permitted"

I need to start a script at startup to run sound through a PCM type EQUAL.
I created the alsaequal package from the AUR repository.
https://aur.archlinux.org/packages/alsaequal/
I tried to try on a newly installed Arch X86, seems to be a permissions issue when trying to access the pcm from a non-interactive session.
If I run a SSH session and leave it running as a daemon, it works perfectly, but if I try to load from systemd to have it in the boot, there is no way to make it work.
For example:
/ usr/bin/aplay-D equal /root/piano2.wav
But if it is run from the "units" start as a service, displays an error that does not have permissions to access the pcm.equal.
[Unit]
Description=Aplay test
[Service]
ExecStart=/bin/bash -c '/usr/bin/aplay-D equal /root/piano2.wav'
[Install]
WantedBy=multi-user.target
Error to start unit:
[root@localhost ~]# systemctl status aplay
aplay.service - Aplay test
Loaded: loaded (/etc/systemd/system/aplay.service; disabled)
Active: failed (Result: exit-code) since jue 2014-07-31 09:14:40 CEST; 22min ago
Process: 1167 ExecStart=/sbin/bash -c /usr/bin/aplay -D equal /root/piano2.wav (code=exited, status=1/FAILURE)
Main PID: 1167 (code=exited, status=1/FAILURE)
jul 31 09:14:40 localhost bash[1167]: aplay: main:722: audio open error: Operation not permitted
jul 31 09:14:40 localhost systemd[1]: aplay.service: main process exited, code=exited, status=1/FAILURE
jul 31 09:14:40 localhost systemd[1]: Unit aplay.service entered failed state.
and this asound settings
/etc/asound.conf
ctl.equal {
type equal;
pcm.plugequal {
type equal;
slave.pcm "plug:dmix";
pcm.equal {
type plug;
slave.pcm plugequal;
Greetings and sorry for my bad English.
Last edited by isabido (2014-07-31 11:45:31)

This is the solution:
Add User=root under service
[Unit]
Description=Aplay test
[Service]
Add User=root
ExecStart=/bin/bash -c '/usr/bin/aplay-D equal /root/piano2.wav'
[Install]
WantedBy=multi-user.target
[root@localhost ~]# systemctl status aplay
â aplay.service - Aplay test
Loaded: loaded (/etc/systemd/system/aplay.service; disabled)
Active: active (running) since jue 2014-07-31 13:12:45 CEST; 4s ago
Main PID: 535 (aplay)
CGroup: /system.slice/aplay.service
ââ535 /usr/bin/aplay -D equal /root/piano2.wav
jul 31 13:12:45 localhost bash[535]: Playing WAVE '/root/piano2.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo
Thanks to user moonman from http://archlinuxarm.org/

htmlb:tree : Node IDs not unique - error handling

From an internal table of customers and contact persons, I made a tree using TVIEWNODE2 structure. Some of the customers are not having contact persons for which contact person ids are simply '00000000'. Thus these nodes may not be unique here. Somehow everything is working fine but sometimes I am getting the above error mentioned in subject.
Actually I have a tabstrip and one of the items of tabstrip contains tree. The occurrence of this error is not at all uniform , sometimes it works and sometimes don't. It's very difficult to find when and why it's triggered. In the same situation and circumstances sometimes it works and sometimes doesn't.Appearance of this error is irrespective of whether tree is operated or any other event is handled.
Can anybody throw light on this? Thanks in advance.

hi thomas
you are absolutely correct when you say that the error occurs in the second request cycle. do i need to clear the tree table then?
As you said , if the application is stateful, the best place is 'On create' event to write the code. But my application is stateless and that is why I am hesitant to put the code in 'On create' and rather placed it in 'On request' event where I am getting the cookie of internal table from which I am preparing tree table.
So, I think keeping the code in 'On request' as before but ensuring that the table is cleared everytime will solve the problem. But let me check this and tell you.
I am very thankful for your quick replies and focussing on my problem. thanks a lot.
I will let you know the outcome soon.
regards
jawahar

Saving master page in search template throws error "UserAgent not available, file operations may not be optimized"

Hi Folks,
I was trying to save basic search template master page "seattle.master" after making change to the template.
I have added just "CompanyName" folder and update the line below in seattle.master.
Change is this : <SharePoint:CssRegistration Name="Themable/CompanyName/corev15.css" runat="server"/>
When I save it, and refresh page on browser, it shows "Something went wrong" error.
ULS says the following error : "UserAgent not Available, file operation may not be optimized"
Pls let us know if there is a solution.
Any help Much appreciated !
Thanks,
Sal

Hi Salman,
Thanks for posting this issue,
Just remove this below given tag and check out. It might be happened that your control is conflicting with others.
Also, browse the below mentioned URL for more details
http://social.msdn.microsoft.com/Forums/office/en-US/b32d1968-81f1-42cd-8f45-798406896335/how-apply-custom-master-page-to-performance-point-dashboard-useragent-not-available-file?forum=sharepointcustomization
I hope this is helpful to you. If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Operation not found error while calling AM methods from managed bean

Hi,
operation not found error while calling AM methods from managed bean.
written a method with two parameters in AM.
exposed the method in AM client interface
in the page bindings added the method in method action ..left empty in the value fields of the parameters.
calling the method from managed bean like below
String userNameVal = (String)userName.getValue();
String passwordVal = (String)password.getValue();
OperationBinding operationBinding =
ADFUtils.findOperation("verifyLogin");
operationBinding.getParamsMap().put("userName",userNameVal);
operationBinding.getParamsMap().put("password",passwordVal);
operationBinding.execute();
i am getting operation verifyLogin not found error.Please suggest me something to do.
Thanks
Satya

Hi vlsn,
Can you try with the below code
// in your backing bean
OperationBinding operation = bindings.getOperationBinding("verifyLogin");
//Put your both parameters here
operation.getParamsMap().put("parameter_name1", parameterValue1);
operation.getParamsMap().put("parameter_name2", parameterValue2);
operation.execute();
if (operation.getResult() != null) {
Boolean result = (Boolean) operation.getResult();
and share the result.
regards,
Rajan

Error while exporting to PDF - Operation not yet implemented

Hi,
    We using C# Dot Net 2005 and Crystal Report for Dot Net 2005 and we are trying to export to PDF file. In one of the reports, we are using a Font "Shree-Kan-0850' from Shree Samhita, a SDK to build application in Indian regional languages. But we are getting an error as follows:-
"Error in File C:\Document~1....\{....}-.rpt: Operation not yet implemented.". When we tried in various sites and forums found that it was due to some non-standard fonts. We have checked that if we remove Shree-Kan-0850 font from report, it works fine and once included the error comes. So problem might by from this font. Whether Crystal report is not supporting other than Windows standard fonts or the problem with PDF? Because with same font we can export to DOC, XLS etc. Please guide us how to solve this?
Thanks and regards,
   Rajeev Vandakar, Bangalore.

Unfortunately, it looks like that font has many issues. Googling 'Univers Condensed Fonts .net' gets a number of interesting posts. E.g.;
Univers 67 Bold Condensed Font does not show in my Flash Fonts List
See if you can select the font in the properties window of the VS.NET IDE.
It would also be interesting to see if the following will work in a new test app:
Private Sub Form1_Load(ByVal sender As System.Object,
ByVal e As System.EventArgs) Handles MyBase.Load
     Label1.Font = New Font("Univers 57 Condensed Font – Univers 57 Condensed", 12, FontStyle.Regular)
End Sub
- Ludek

Server 2008 Pinter install error OPERATION COULD NOT BE COMPLETED (error 0x900f0214)

I downloaded the HP Universal printer driver for a LaserJet 4250dn network printer to our server running SERVER 2008 SP2.
I dowloaded the zipped executable files for both the PCL5 and PCL6 drivers to the desktop and ran the EXE to unzip the files. When I tried to run the INSTALL.EXE file (as an ADMINISTRATOR) for BOTH drivers, the following occurs:
Answer YES to EULA
Select TRADITIONAL MODE (or DYNAMIC MODE - it doesn't matter - neither one works)
Click INSTALL
Immediately I get the error OPERATION COULD NOT BE COMPLETED (error 0x900f0214)
Click OK
Click FINISH
This happens with both the PCL5 & PCL6 driver installations.
I activated FILE SHARING, PRINTER SHARING, and NETWORK DISCOVERY but did not solve the problem.
I was logged in as the Domain Administrator and the Local Admin also.
Any suggestions?

Hi selmore,
This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links.
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Layer Comps To Files - Export error: Could not complete this operation. There are no user slices

I have been using the Export Layer Comps To Files scrips that ships with Adobe Photoshop CS5 for a while and found it very useful, apart from the numbers it automatically adds as a prefix to the layercomp name.
A friend pointed me in the direction of a altered version of this scrips which removes the numbers and only exports the layer comp name, gerat I thought. Not great! After using this successfully for a while the scrip started to throw up errors whenever I attempted to export. Either "No layer comps found" or "Adobe Save for Web & Devices Error: Could not complete this operation. There are no user slices." As I knew there were layercomps for the first error and knew that I had not created any slices for the second error I was pretty miffed. Fortunately I had the foresight to make a copy of the original script from the Photoshop presets library.
I have since deleted the offending script out of my presets folder and copied the original script back in however the error still persists. I constantly receive Adobe Save for Web & Devices Error: Could not complete this operation. There are no user slices. I have searched the forums and around the net to try and find a solution for this problem but none seem to present themselves. I am perplex how this error can persist when the original script is now being used.
If there's is anyone out there who can help me resolve this I'd be most grateful. As I say I've tried to resolve this myself and am pretty computer savvy but this one has defeated me
Thanks in advance

The problem seems to be already solved, but I'm commenting this for future reference.
This has happened to me too and I think I know what causes it.
It happens when you...
1) Do "Save for Web" with the "All User Slices" selected in the dropdown menu "Slices".
(This can only be done with a file that has a user slice)
2) Then try to use the "Layer Comp to Files" script to a file that doesn't have any slices.
To avoid this you need to once open a file that "has" a user slice and save with
the "All Slices" option in the "Slices" menu and then go back to the file you want
to run the script to.
When you run the script, the saved "Slices" option from the previous export seems to
be used and causes an error when there are no user slice.
I also found a fix to the script to avoid this error to come out.
This can be also applied to the fix to "remove the numbers" added to the head of the
exported file names.
The number removal script goes something like this...
var fileNameBody = exportInfo.fileNamePrefix;
if (fileNameBody != "") fileNameBody += "_";
fileNameBody += compRef.name;
this should replace the "Layer Comps to Files.jsx" lines 188-190.
In addition to that, the script below needs to be added below line 818 and line 863.
(This line numbers are those before any alterations to the "Layer Comps to Files.jsx" script)
var idSWsl = charIDToTypeID( "SWsl" );
var idSTsl = charIDToTypeID( "STsl" );
var idSLAl = charIDToTypeID( "SLAl" );
desc4.putEnumerated( idSWsl, idSTsl, idSLAl );
The line right above where the above script should be inserted should read as the following...
desc4.putPath( id44, new File( exportInfo.destination + "/" + fileNameBody + ".png") );
Actually it can be added any where after the "desc4" variable is declared but I specified just
to make it simple.
This sets the "Save for Web" "Slices" settings to "All User Slices".

Open error 1 - Operation not permitted' error when checking permissions

Hi
I just installed Snow Leopard on a clean HD, and when checking permissions I get these errors:
Repairing permissions for “Internal HD”
Open error 1: "Operation not permitted" on System/Library/Frameworks/Python.framework/Versions/2.3/lib/python2.3/lib-dynlo ad/itertools.so
Open error 1: "Operation not permitted" on System/Library/Frameworks/Python.framework/Versions/2.5/Extras/lib/python/PyObj C/CoreFoundation/_CFRunLoopObserver.so
Open error 1: "Operation not permitted" on System/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/imputil.p yo
Open error 1: "Operation not permitted" on System/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/plat-mac/ Carbon/Appearance.pyc
Open error 1: "Operation not permitted" on System/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/plat-mac/ lib-scriptpackages/StdSuites/_init_.pyo
Open error 1: "Operation not permitted" on System/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/test/test _inspect.pyc
Open error 1: "Operation not permitted" on System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python/PyObj C/AppKit/_appmain.so
Open error 1: "Operation not permitted" on System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python/dateu til/relativedelta.py
Open error 1: "Operation not permitted" on System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python/numpy /ma/mrecords.py
Open error 1: "Operation not permitted" on System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python/zope/ interface/adapter.pyc
Open error 1: "Operation not permitted" on System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils /msvc9compiler.pyc
Open error 1: "Operation not permitted" on System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/email/tes t/testemailrenamed.pyo
Open error 1: "Operation not permitted" on usr/sbin/stdhosts
Open error 1: "Operation not permitted" on Applications/Utilities/Boot Camp Assistant.app/Contents/Resources/fi.lproj/MainMenu.nib/keyedobjects.nib
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Open error 1: "Operation not permitted" on System/Library/Tcl/tcllib1.11/fileutil/multiop.tcl
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Is there anything to look out for here? What have I done wrong? Did I reformat my drive incorrectly? I chose Mac OS Extended (Journaled).
Tried also to fix permissions from the install disk but got the same errors.
Any help would be appreciated. Thanks

acquiesce wrote:
Hmm I haven't seen so many errors either.
the number of errors is not high at all. Leopard would very often produce at least 3 to 4 times as many.
It could have something to do with me running snow leopard on a Macbook Pro 2.16 core duo and not a core 2 duo... ?
no, that would not have anything to do with it. as i said, those are most likely just errors in the permissions database. as i said, leopard was notorious for those. snow leopard is not as bad but produces a number of them too. I just haven't seen this particular kind of messages before. reinstalling SL will fix them but it seems like a serious overkill in this case.

Mac OS X 10.6.8, receiving error message "Failed to check for updates. The operation couldn't be completed. Operation not permitted." How to fix?

When I try to update my software, I'm receiving the error message "Failed to check for updates. The operation couldn't be completed. Operation not permitted."
I'm using Safari 4.0.3. Yes, I know this is an old version of Safari - I can't update it, or any other software on my MacBook. Should I just wait for the Lion OS, or is there any kind of fix a non-technical Mac user like me can attempt without screwing up her laptop?
I've tried clearing my cache and resetting Safari already - doesn't help. I've also tried to update after disabling my (Norton) antivirus software, thinking that might be interfering. None of these help.
I don't know if it's a related problem, but also I can't download .pdf files from the internet, although I used to be able to.

You should use the NortonAV uninstaller to uninstall it. Disabling the dreadful thing in the past hasn't always been sufficient for it to cease creating system havoc. The Mac NortonAV version has a long and well-earned reputation for doing truly seriously nasty things to OS X. Shame on Comcast for inflicting NortonAV on its Mac customers. It's not a matter of if NortonAV will mess up OS X but when and how badly. I can't help but wondering if some setting in your Norton AV has decided that NortonAV, rather than you, will be making executive decisions about what you are allowed to install on your computer and is keeping that fact a secret.
After you are done uninstalling Norton use the finder to search for any Norton files that the uninstaller might have missed. Add the option to search for invisible files.
After you have removed all the Norton bits and pieces restart in safe mode by holding down the shift key right after the startup chime. Keep holding down the shift key until you see the Apple logo and spinning gear. Safe mode does some maintenance tasks which means a much longer than normal startup time. Use Disk Utility to repair permission
If your Mac works normally in safe mode restart. If things still aren't fixed you might want to give another shot at reinstalling Snow Leopard from the install DVD and applying the Mac OS X 10.6.8 Update Combo before taking your Mac to the Apple Store.
If you feel the need to run AV software on your Mac use ClamXav in manual mode. It's donationware and doesn't seem to cause the litany of weird problems that are associated with other AV software.

BAPI_INSPOPER_GETDETAIL error: Operation not unique

Similar Messages

Maybe you are looking for