Error while exporting to PDF - Operation not yet implemented

Hi,
    We using C# Dot Net 2005 and Crystal Report for Dot Net 2005 and we are trying to export to PDF file.  In one of the reports, we are using a Font "Shree-Kan-0850' from Shree Samhita, a SDK to build application in Indian regional languages. But we are getting an error as follows:-
"Error in File C:\Document~1....\{....}-.rpt: Operation not yet implemented.". When we tried in various sites and forums found that it was due to some non-standard fonts. We have checked that if we remove Shree-Kan-0850 font from report, it works fine and once included the error comes. So problem might by from this font. Whether Crystal report is not supporting other than Windows standard fonts or the problem with PDF? Because with same font we can export to DOC, XLS etc. Please guide us how to solve this?
Thanks and regards,
   Rajeev Vandakar, Bangalore.

Unfortunately, it looks like that font has many issues. Googling 'Univers Condensed Fonts .net' gets a number of interesting posts. E.g.;
Univers 67 Bold Condensed Font does not show in my Flash Fonts List
See if you can select the font in the properties window of the VS.NET IDE.
It would also be interesting to see if the following will work in a new test app:
Private Sub Form1_Load(ByVal sender As System.Object,
ByVal e As System.EventArgs) Handles MyBase.Load
     Label1.Font = New Font("Univers 57 Condensed Font – Univers 57 Condensed", 12, FontStyle.Regular)
End Sub
- Ludek

Similar Messages

  • Export PDF Error - Operation Not Yet Implemented

    Dear All,
    i am trying to export a crystal report to pdf and it is ending in following error:
    Error
    Error in File CrystalReportTestBlankReport {D781AF0B-642B-4FB5-BC4B-F05D5934DA2F}.rpt: Operation not yet implemented.
    You may test yourself at here : [http://esolutionscurry.co.in/crystalreporttestpage.aspx|http://esolutionscurry.co.in/crystalreporttestpage.aspx]
    Please note there are no issues in opening report and exporting to word, rtf and excel. Just PDF export is not working.
    My Server Configuration is : windows server 2008 R2 Standard, Dot Net Framework 4 and Plesk Parallel 10.3
    I have installed Crystal report 13 (the one that is available for use with Visual Studio 2010)
    I am able to export the report from within the Visual Studio Localhost, but this fails in IIS.
    Please help.. this issue is killing me everyday.
    Thanks in advance..
    Regards,
    Ankit Singhal

    Hello, I had a similar problem, and finally, thanks to this thread I could find the solution.
    In development enviroment the application worked, but in production it didn't work (W2k8 with IIS 7 and MVC3 with Crystal Reports 11). When I tried to generate a pdf document I got the error:
    Operation not yet implemented.
    I tried to solve the trouble by reading a lot of information about CR. I discarded troubles with the font, so I focused in the temp dir in CR. I wanted to avoid give permissons to the application user to the windows temp dir.
    Finally I found out there's a registry key that can change the temp directory in CR:
    HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Report Application Server\InprocServer\TempDir
    I have an x64 OS, so in the x86, it should be
    HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Report Application Server\InprocServer\TempDir
    This key doesn't exist by default. I created this with the value: D:\CRTemp, but I keep the same error, but I could check that when I generated the reports, some files appeared in that directory.
    So my research continued. Thanks to your advices, I used the Process Monitor to see what was happening, so I could see the real problem. It was that the CR was trying to read a file called D:\CRTEMPReport{.....}.rpt.
    So I changed the Key, with a final backslash (D:\CRTemp\). When I changed that, everything worked fine, using that new key.
    Maybe my experience can help people with similar troubles.
    Thanks for your advices Ludek.

  • Operation not yet implemented when exporting crystal report to pdf

    Thank you in advance,
    When running the line **** export within the following code, I am getting the following error message:
    "Error in File C:\DOCUME1\rborda\LOCALS1\Temp\TimeDetailTest {00DC8730-45CD-4A29-8854-C44BBD5B5230}.rpt: Operation not yet implemented."
    I tried the following solution registering dlls, but still did not solve the problem above:
    regsvr32 "C:\Program Files\Common Files\Crystal Decisions\2.0\bin\crtslv.dll"
    regsvr32 "C:\Program Files\Common Files\Crystal Decisions\2.0\bin\ExportModeller.dll"
    regsvr32 "C:\Program Files\Common Files\Crystal Decisions\2.0\bin\tslv.dll"
    CODE:
    Imports CrystalDecisions.CrystalReports.Engine
    Imports CrystalDecisions.Shared
    Imports CrystalDecisions.ReportAppServer
    Imports CrystalDecisions.Web
    Imports CrystalDecisions.ReportSource
    Partial Public Class _Default
        Inherits System.Web.UI.Page
        Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
        End Sub
        Private Sub btnRunReport_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnRunReport.Click
            'Try
            Dim ConInfo As New CrystalDecisions.Shared.TableLogOnInfo
            Dim oRptDoc As New ReportDocument
            Dim expo As New ExportOptions
            Dim oDiskFileDestinOption As New DiskFileDestinationOptions()
            Dim strCrystalReportFilePath As String
            Dim strPdfFileDestinationPath As String
            Dim crParameterDiscreteValue As ParameterDiscreteValue
            Dim crParameterFieldDefinitions As ParameterFieldDefinitions
            Dim crParameterFieldLocation As ParameterFieldDefinition
            Dim crParameterValues As ParameterValues
            strCrystalReportFilePath = "C:\TimeDetailTest.rpt"
            strPdfFileDestinationPath = "C:\TimeDetailTest0814.pdf"
            oRptDoc.Load(strCrystalReportFilePath) 'loads the crystalreports in to the memory
            'Create parameter objects
            'Provide Parameter values
            crParameterFieldDefinitions = oRptDoc.DataDefinition.ParameterFields
            crParameterFieldLocation = crParameterFieldDefinitions.Item("StartPeriod")
            crParameterValues = crParameterFieldLocation.CurrentValues
            crParameterDiscreteValue = New CrystalDecisions.Shared.ParameterDiscreteValue
            crParameterDiscreteValue.Value = #7/6/2008#
            crParameterValues.Add(crParameterDiscreteValue)
            crParameterFieldLocation.ApplyCurrentValues(crParameterValues)
            crParameterFieldLocation = crParameterFieldDefinitions.Item("EndPeriod")
            crParameterValues = crParameterFieldLocation.CurrentValues
            crParameterDiscreteValue = New CrystalDecisions.Shared.ParameterDiscreteValue
            crParameterDiscreteValue.Value = #8/2/2008#
            crParameterValues.Add(crParameterDiscreteValue)
            crParameterFieldLocation.ApplyCurrentValues(crParameterValues)
            'Export Information
            oDiskFileDestinOption.DiskFileName = strPdfFileDestinationPath    'path of file where u want to locate ur PDF
            oRptDoc.ExportOptions.DestinationOptions = oDiskFileDestinOption
            oRptDoc.ExportOptions.ExportDestinationType = ExportDestinationType.DiskFile
            oRptDoc.ExportOptions.ExportFormatType = ExportFormatType.PortableDocFormat
           oRptDoc.Export()
        End Sub
    End Class

    I got the same error message when trying to export a report to Excel format.  This happened with an existing report that had always exported with no problem, until I added a couple of new formulas. After investigating, I discovered that one of my formulas was returning a divide by zero error if a date range was too small.  Once I fixed that formula, it began exporting again with no problem.  I discovered this by trying to export to PDF (since all of the situations discussed here involved PDF) and that was when it returned the divide by zero error.

  • Schedule Report Error - Error in File (Operation not yet implemented)

    Crystal Reports Server XI R2
    Microsoft SQL Server 2003 SP2
    We have a report that is run for 100s of Schools once a month.  We started getting the below message.  We tried to manually run the report from the CMC and get the same message. 
    Any suggestions on how to resolve this?   
    Thanks,
    Lisa
    Status: Failed
    Printer: The instance is not printed.
    External Destination: None
    Data Refresh Settings:  Use the server defaults
    Start Time 4/7/09 3:10:21 PM
    End Time 4/7/09 3:10:33 PM
    Server Used: CO-APT01.reportjobserver
    Error Message:  Error in File D:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\Data\procSched\CO-APRT02.reportjobserve\~tmp4cc5a1e77c49110.rpt:  Operation not yet implemented.

    Hi Rene,
    Try this as remedy to your problem.
    Whenever you are using the New Page before for a Group, go to Section Expert for the corresponding section and check the New Page Before property and go to Conditional formula and type the following:
    Not OnFirstRecord
    Whenever you are using the New Page after for a Group, go to Section Expert for the corresponding section and check the New Page After property and go to Conditional formula and type the following:
    Not OnLastRecord
    HTH...
    Thanks,
    Amogh

  • Error  while exporting in pdf in crystal report XI

    Post Author: Siddheswar
    CA Forum: General
    hi
    I am getting the following error in crystal report XI while exporting to pdf.
    The Error:
    Method 'ISCREditableRTFExportFormatOptions_reserved5' on type 'CrystalDecisions.ReportAppServer.ReportDefModel.EditableRTFExportFormatOptionsClass' from assembly 'CrystalDecisions.ReportAppServer.ReportDefModel, Version=11.0.3300.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' is overriding a method that has been overridden.
    Please Help.
    Thanking in advance.
    Regards
    Siddheswar

    The stack trace is caused by whitespace in your CrystalReportViewer.jsp file.  Look up SAP Note 1199025 for the resolution.
    It's not related to the PDF formatting issue.  There's been changes to the formatting with the most recent version - Crystal Reports for Eclipse 2.0 - so if you haven't already, I recommend you upgrade.
    Note that there's differences in font metric calculation when using Adobe PDF format such that there's no way to get exact agreement between output of the CR and PDF.  But the latest version helps greatly.
    Sincerely,
    Ted Ueda

  • Getting error while export folder: ScriptTemplate [6] not found

    Hi,
    I am trying to do a weekly refresh in IOP. As part of the script I take a backup of export folder and generate a new export folder. While taking a backup of export folder, job is failing while exporting user preferences.
    2011-06-21 00:02:00,626 [ExecuteCommand] MigrateExporter INFO - Exporting users to D:\bsm\IT_Big\export\migration\data\users.csv
    2011-06-21 00:02:00,704 [ExecuteCommand] MigrateExporter INFO - Exporting user acls to file D:\bsm\IT_Big\export\migration\model\acls.xml
    2011-06-21 00:02:01,562 [ExecuteCommand] Request ERROR - ISException processing request [execute]
    com.interlacesystems.util.ObjectDNEException: ScriptTemplate [6] not found
    Please let us know if any idea.
    Thanks

    Hi,
    I am trying to do a weekly refresh in IOP. As part of the script I take a backup of export folder and generate a new export folder. While taking a backup of export folder, job is failing while exporting user preferences.
    2011-06-21 00:02:00,626 [ExecuteCommand] MigrateExporter INFO - Exporting users to D:\bsm\IT_Big\export\migration\data\users.csv
    2011-06-21 00:02:00,704 [ExecuteCommand] MigrateExporter INFO - Exporting user acls to file D:\bsm\IT_Big\export\migration\model\acls.xml
    2011-06-21 00:02:01,562 [ExecuteCommand] Request ERROR - ISException processing request [execute]
    com.interlacesystems.util.ObjectDNEException: ScriptTemplate [6] not found
    Please let us know if any idea.
    Thanks

  • Error while exporting to PDF document in OBIEE 11g

    Hi
    In OBIEE 11g we are facing an issue regarding exporting a few reports to pdf. It is resulting in following error: "Error generating PDF document".
    The reports are placed on a dashboard which has a prompt too. However, when we remove the prompts, the export is working fine.
    We will really appreciate any help in this regard.
    Thanks.

    Hi,
    Looks like this is a sort of known bug with PDF creator in 11g. Try implementing the below solution:
    To configure the Javahost service, edit the Javahost service configuration parameters in the
    instanceconfig.xml file. The parameters are
    identified by their relative path starting from the /WebConfig/ServerInstance node
    For example:
    <JavaHost>
    <PDF>
    <InputStreamLimitInKB>50000</InputStreamLimitInKB>
    </PDF>
    </JavaHost>
    After changes restart Siebel Analytics Java Host and Siebel Analytics Web services
    If it doesn't work try to create same report in xml publisher as presentations services in obiee has limited capacities in printing out reports.
    Refer to this thread for related useful information: Error in creating a PDF
    Hope it helps.
    Thanks,
    -Amith.

  • Method not yet implemented at javax.mail.internet.MimeMessage

    What will cause the following error?
    java.lang.UnsupportedOperationException: Method not yet implemented
         at javax.mail.internet.MimeMessage.<init>(MimeMessage.java:89)
         at com.pe.app.inhouse.module.util.DateUtilTest.testBB(DateUtilTest.java:61)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at junit.framework.TestCase.runTest(TestCase.java:154)
         at junit.framework.TestCase.runBare(TestCase.java:127)
         at junit.framework.TestResult$1.protect(TestResult.java:106)
         at junit.framework.TestResult.runProtected(TestResult.java:124)
         at junit.framework.TestResult.run(TestResult.java:109)
         at junit.framework.TestCase.run(TestCase.java:118)
         at junit.framework.TestSuite.runTest(TestSuite.java:208)
         at junit.framework.TestSuite.run(TestSuite.java:203)
         at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:478)
         at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:344)
         at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:196)

    [http://www.google.com/search?hl=en&q=javax.mail.internet.MimeMessage+jar+download]

  • Error while consolidating. The operation could not be completed.

    Error while consolidating. The operation could not be completed. Cocoa error 13. (null)
    Got this when I was trying to consolidate some referenced photoshop files. If failed to create a new version as well when I tried to open the files in Photoshop. I rebuilt the the library and it displays and exports both masters and version just fine, but it won't let me consolidate the master to the library.
    What gives?

    I think that error was due to the fact that I hadn't upgraded MAC OSX after installing it. I have done that now and now I get another error saying the masters are offline.
    I found this old thread: https://discussions.apple.com/thread/1965601?start=0&tstart=0 which seems to be the same problem. This is a whole other topic so I will start a new thread, but leave this in case anyone gets the same problem as me. Upgrade your OSX. That's the solution :-)

  • IllegalArgumentException error while exporting report in PDF format

    Hi all,
    we are using Crystal Report 2008, Java 1.5.22 and JRC 11.8.4.1094 to export reports in pdf format within java.
    It is working fine for all reports except for a specific report where it gives IllegalArgumentException while exporting the PDF.
    Below the error occurred:
    12:39:16,875 ERROR [c] Disk Exporter: no output file was created by an exporter
    12:39:16,875 ERROR <b> PdfExporter: caught Exception in PDFFormatter.finalizeFormatJob (from destination?); aborting export
    java.lang.IllegalArgumentException
         at com.crystaldecisions.reports.exporters.destination.disk.c.a(Unknown Source)
         at com.crystaldecisions.reports.exporters.format.page.pdf.b.a(Unknown Source)
         at com.crystaldecisions.reports.a.e.if(Unknown Source)
         at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)
         at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
         at com.businessobjects.reports.sdk.b.b.int(Unknown Source)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
         at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
         at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source)
         at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source)
         at com.crystaldecisions.report.web.event.br.a(Unknown Source)
         at com.crystaldecisions.report.web.event.w.a(Unknown Source)
         at com.crystaldecisions.report.web.event.b7.broadcast(Unknown Source)
         at com.crystaldecisions.report.web.event.av.a(Unknown Source)
         at com.crystaldecisions.report.web.WorkflowController.do(Unknown Source)
         at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source)
         at com.crystaldecisions.report.web.ServerControl.a(Unknown Source)
         at com.crystaldecisions.report.web.viewer.ReportExportControl.a(Unknown Source)
         at com.crystaldecisions.report.web.ServerControl.getHtmlContent(Unknown Source)
    12:39:16,875 INFO  [c] Disk Exporter: finalizing export to destination
    12:39:16,875 ERROR [JRCCommunicationAdapter] Failed to export report
    com.crystaldecisions.reports.exporters.format.page.pdf.a.a: Unknown exception is thrown
         at com.crystaldecisions.reports.exporters.format.page.pdf.b.a(Unknown Source)
         at com.crystaldecisions.reports.a.e.if(Unknown Source)
         at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)
         at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
         at com.businessobjects.reports.sdk.b.b.int(Unknown Source)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
         at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
         at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source)
         at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source)
         at com.crystaldecisions.report.web.event.br.a(Unknown Source)
         at com.crystaldecisions.report.web.event.w.a(Unknown Source)
         at com.crystaldecisions.report.web.event.b7.broadcast(Unknown Source)
         at com.crystaldecisions.report.web.event.av.a(Unknown Source)
         at com.crystaldecisions.report.web.WorkflowController.do(Unknown Source)
         at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source)
         at com.crystaldecisions.report.web.ServerControl.a(Unknown Source)
         at com.crystaldecisions.report.web.viewer.ReportExportControl.a(Unknown Source)
         at com.crystaldecisions.report.web.ServerControl.getHtmlContent(Unknown Source)
    Caused by: java.lang.IllegalArgumentException
         at com.crystaldecisions.reports.exporters.destination.disk.c.a(Unknown Source)
         ... 56 more
    Have an idea?
    Thanks

    Hello Andrea.
    I searched through the SAP Notes for the error that you are encountering.  There is an SAP Note that exists titled the following:
    1332907 - Report being exported to PDF format using the Crystal Reports for Eclipse 1.x runtime, errors with the exception: PdfExporter: caught Exception in PDFFormatter.finalizeFormatJob
    Since you may not have access to the SAP Notes, I will extract the details that are mentioned in the note here:
    =============================================
    Symptom
    Attempting to export a report to Adobe PDF format using the Crystal Reports for Eclipse 1.x runtime results in an exception.
    The exception indicates "PdfExporter: caught Exception in PDFFormatter.finalizeFormatJob"
    Environment
    Windows 2003
    Apache Tomcat 5.0
    Crystal Reports for Eclipse version 1.x
    Reproducing the Issue
    Using the Crystal Reports for Eclipse runtime version 1.x attempt to export a report to PDF format that has the "Repeat Group Header on Each Page" option enabled.
    Note: This does not occur if this option is enabled in a subreport.
    Cause
    When the "Repeat Group Header on Each Page" is enabled for a group in a main report the Crystal Reports for Eclipse 1.x runtime is unable to correclty format the PDF document which results in an exception.
    Resolution
    Updating the application to use Crystal Reports for Eclipse version 2.x runtime will resolve the issue.
    The most recent updates to the Crystal Reports for Eclipse runtime can be freely downloaded from the SAP SDN Website. 
    http://www.sdn.sap.com/irj/boc/crystalreports-java
    =============================================
    Since you are on JRC 11.8.4.1094 which is Crystal Reports for Eclipse 1.x, this may be the cause of your problem.
    I hope that this helps.
    Regards.
    - Robert

  • RrRenderingError - Error while exporting report to PDF

    Hi,
    I am getting an error while exporting SSRS 2000 report to PDF. The error message is as shown below. This is report actually by sales rep and it is working fine with all the sales rep but when i try with one sales rep  i get this error.
    Error
    Exception of type Microsoft.ReportingServices.ReportRendering.ReportRenderingException was thrown. (rrRenderingError) Get Online Help
    Exception of type Microsoft.ReportingServices.ReportRendering.ReportRenderingException was thrown.
    Object reference not set to an instance of an object.
    Please somebody help me out.
    Thanks
    Cheers
    Gigi
    cheri

    Cherian K,
    A message that indicates that the object reference is not set to an instance of the object is typically caused by one or more of the following reasons:
    There are soft page breaks within empty lists in the report.
    There are hidden groups within the report and you tried to export it to PDF.
    The report has a link to a subreport that is not published on the report server and you tried to export it to CSV.
    There are text boxes with a width and/or height of zero in the report.
    A text box is either hidden or the NoRows property is set to true.
    A text box spans table cells where some cells have a collection of null values.
    The report has static columns and/or rows and, in the Visibility properties, Hidden is set to true.
    The report has static columns and/or rows and there are grand totals in the report.
    The report has static column headings and, in the Visibility properties, Hidden is set to true.
    The matrix report has multiple columns and rows and, in the Visibility properties, Hidden is set to true and
    you tried to export to PDF or TIFF.
    Regards
    Shiv

  • Crystal Report: Error while Export to Excel

    We are using combination of Crystal Report 10 With
    J2EE, Below source code is working fine While
    exporting to PDF, MSWord, RTF format.
    if(selectedFormat.equals("MSWORD"))
    exportOptions.setExportFormatType(ReportExportFormat.MSWord);
    if(iPageFrom>0 && iPageTo>0)
    RTFWordExportFormatOptions RTFExpOpts=new
    RTFWordExportFormatOptions();
    RTFExpOpts.setStartPageNumber(iPageFrom);
    RTFExpOpts.setEndPageNumber(iPageTo);
    exportOptions.setFormatOptions(RTFExpOpts);
    But am getting following error while exporting report
    to Excel
    com.crystaldecisions.report.web.viewer.ReportExportControl
    Invalid post back event : {0}
    We would like to know, Is SDK feasible for exporting
    to excel or not ?
    If yes! then Please suggest us for same.
    Thanks In advance :)

    I will make sure that I am on the latest patch ie SP4
    https://smpdl.sap-ag.de/~sapidp/012002523100008782452011E/cr2008sp4.exe
    You can find the rumtimes here:
    MSI:
    https://smpdl.sap-ag.de/~sapidp/012002523100008782532011E/cr2008sp4_redist.zip
    MSM:
    https://smpdl.sap-ag.de/~sapidp/012002523100008782522011E/cr2008sp4_mm.zip
    ClickOnce
    https://smpdl.sap-ag.de/~sapidp/012002523100008782442011E/cr2008sp4_clickonce.zip
    Recompile the app and then deploy.
    What is the .NET Framework used by the application?
    Method of deployment?
    OS where app is deployed, x86 or x64?
    Are you able to export the report from designer ie CR2008 Standalone?
    - Saurabh

  • Getting error while exporting the report

    Hi,
    I am facing error while exporting the report. Getting below error.
    "No data can be exported because there are no rows.Operation failed."
    how come this error is coming even though my report contains data.
    please do the needful.
    i am using the version discoverer 10g.
    Thanks,
    RC.

    I am having the same problem. I found this article in which the user was exporting 100,000 plus records and had the same issue exporting (Discoverer workbook exported to excel error - No dta can be exported and they were able to fix it by adjusting two memory settings in their pref.txt file. However, in my report there are only 1,100 records with eleven columns being returned. I export much larger reports on a daily basis.
    Originally, the report was returning records and when I would go to retrieve all records it would tell me that all the rows could not be returned and the data may be incomplete. After scrubbing my SQL I no longer get that message, but the report still will not export and I get the same error as you.
    I have not tried the pref.txt settings fix but may try it today to see if that is a workaround. I will then have to evaluate whether it is a good fix or just a band-aid.

  • Remove back image while exporting to PDF (InDesign CS4)??

    Hi All,
    I have two images in my InDesign CS4 file and one image is hiding behind my second image. When I am exporting my InDesign file as Pdf and opening in Acrobat, Acrobat showing bottom image first and then showing my top image.
    Is there any way to remove my bottom image which is appearing behind in my top image while exporting to Pdf.
    I don't want remove manually because it happening with most of my InDesign file.
    Please suggest.
    Thanks
    Baljeet

    I would move bottom image to separate layer and then eventually I would switch it off.
    If you don't want to change anything in InDesign you can eliminate the second image in your already generated PDF.
    Open your PDF in Acrobat Pro.
    Advanced -> Print Production -> PDF Optimizer.
    You can leave only "Clean Up" check box marked (eventually Transparency if Acrobat will not allow you to switch it off). All the rest leave unchecked.
    This operation will remove hidden image.
    Correction: It will not remove the image. It just made the PDF to be displayed much more faster that is why the second image appearance was not noticeable. Sorry for the inconvenience.

  • Error while exporting/transporting the Business system from Dev to Quality

    Hi,
    We are getting the following error whil exporting/trsnporting the Business system from development(SLD) env to quality(SLD) environment. The error is
      404   Not Found
      The requested resource does not exist.
      Details:   Go to main page of this application!
    We have followed the following procedure to export :
    1. opened the business system.
    2. Clicked on export option
    3. tried to download
    then we got the above error message.
    Please provide your precious inputs to resove our problem.
    Thanks
    Ramesh

    Go through the following links for transporting XI objects.
    https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
    ere's a good link for what you are looking.
    Re: Transport design and configuration objects
    Here are some blogs.
    /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
    /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
    Pls reward if useful

Maybe you are looking for

  • New Problem with cropping in Photoshop Elements 8.0

    I use adobe photoshop elements 8 for years already and it has worked perfectly up until now. When I crop a picture instead of it cropping when I click on the check mark (as in the past) it reduces it to a small window with just gray in it....no reduc

  • Apps no longer showing up after download

    I have quite a few apps on my Touch (165). The last three that I have downloaded through the device have loaded (I can do a search and find them), but they are not showing up anywhere on the Touch itself. I even tried hooking it up to my PC and redow

  • Docked T500 External Monitor cannot switch to Primary

    I am attempting to make my external monitor my primary monitor when docked. The Windows options are greyed out and when I run presentation director I get error messages saying refresh rates and resolutions are incompatible.  I know these are valid se

  • After install oracle 10g, enterprise manager web version, can not login

    Hi Guru, I have installed oracle 10g on windows xp pro sp2 successfully, can use sqlplus to connect to DB, but when using IE to login enterprise manager web version port 1158, it failed. The login page came out, but when I keyed in the right userid/p

  • Inbound IDOC should trigger worklfow.

    Dear Experts, My requirement is, when ever an Inbound IDoc is created, one workflow with that IDOC data sholud trigger. Problem is how to get IDoc data into workflow. Thanks in advance. Regards, Bala