BAPI_ISUACCOUNT_CHANGE doesn't see what BAPI_ISUPARTNER_CHANGE changed

Hi,
I have a program where I am adding payment cards and bank accounts to a business partner and then creating them as incoming payment method of a contract account. Therefore, I call the BAPI functions like:
CALL FUNCTION 'BAPI_ISUPARTNER_CHANGE'...
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
CALL FUNCTION 'BAPI_ISUACCOUNT_CHANGE'...
My problem is that the last BAPI doesn't see the result of the first BAPI call. That is, if I use the first BAPI to create a payment card or bank account for a BP, and then try to insert their ID's as CA's incoming payment method, the second BAPI returns error message saying that I am using non-existant data. If I run the same program with the same data for the second time, everything works fine.
How can I make the second BAPI immediatelly be aware of the changes made by the first one?
Thanks!
KR,
Igor

Igor:
add parameter wait = X to your commit call. If that still does not work, then maybe add an explicit wait step between the two change processes.
regards,
bill.

Similar Messages

Mobo doesn't "see" hdd after changing BIOS

I have this strange problem. After changing my mobo's BIOS couple of days ago I had a strange "lack of hdd" problem with the new BIOS. I turned off my computer and turned it on again - I was really amazed to see Windows booting normally - everything suddently was ok. I thought that this is a strange behaviour of the BIOS ( 'couse it's probably BIOS thats respnosible for looking for hardware while booting the computer ) and I decided to downgrade the BIOS and to install the old version - the previous one ( from 1.6 to 1.5 ). So I did.
For a while I thought everything is like it used to be before playing with BIOS .... till today :(
I wanted to restart my Computer and while booting the same thing happened - it was written that there is no HDD in the computer and so it cannot boot the OS - I tried to do smth inside the BIOS but I couldnt do anything - like if it was really disconnected - strange thing that the DVD-ROM which is attached using the same IDE cable to the mobo was present in the BIOS ....
I remembered that the last time when it happened the turnOFF->turnON method worked - this time it was ok as well.
But it's still a problem for me - why does it happen anyway ? Did someone have his kind of problem ?
Can I do anything about it ?
PS. my mobo is K7T266Pro2-U with the BIOS ver.1.50 (downgraded from 1.60), OS is WindowsXP with SP1
The HDD is Seagate 20GB but I don't think it is it's fault.
Thank you in advance !

Thanks maesus for answering so soon.
I think I'll to just that - I understand that the Quick Boot option turned on omites something while booting the comp. ?
Hope the computer won't boot much slower after turning off that option.
PS. do you think a new Hard-Disc would solve the problem ?
hope the hdd isn't dying ;(

MacBook won't join networks on startup - what has changed?

I seem to have posted this in the wrong forum (Tiger rather than Snow Leopard), so on advice from iyacyas I'm reposting it here. Maybe it should be in the MacBook forum, but I will start here:
I am using my MacBook with the same version of the OS and the same networks as 2 weeks ago, but now I find that when I start up the machine near a known network (a WiFi router permanently connected to the Internet), the WiFi connects but I am not actually on the Internet. If I turn Airport off and on again, or if I renew the DHCP lease in Network Preferences, then I connect to the Internet instantly. This happens on networks in different countries with different levels of security (including one network with no security at all). I can't figure out how to fix it, and I can't figure out what has changed. I have done various Apple updates since installing 10.6.2 but none have claimed to do anything to network connections. Can anyone help me to get back to where I was.
BTW this problem doesn't seem to occur on my other Macs (one Intel, one PowerPC - tho these don't move around between locations) or my iPod touch.

Thanks - it took me a long time but eventually I tried a version of this. My MacBook remembers maybe eight networks and I don't know how easily I could re-harvest their passwords (the person who set it usually has to be present to tell me and that's not always the case), so I tried it with just one network, the one which I'm using now and which I set up myself. As it doesn't have a password (I live a long way from the next house and my nearest neighbours are a couple of un-cyber-aware horses), so there was no Keychain entry that I could see for the password. So I just deleted the network from the Airport list, and sure enough when I restarted I got an Internet connection immediately. However when I tried it again this morning, the problem had returned. As before, I can't see what has changed since this worked every time, nor what is the difference between my restart and my turning Airport off and on after the machine boots up.
Puzzled.

What was changed in 3.4, beta 2?

Can you explain what we are looking at under the Release Notes? I think it is all the changes going into AIR 3.4, but is there a place we can go to see what was changed from Beta release, to Beta Release? Example, this is beta 2, so what specifically was fixed in just this build?

I'm the editor of our web site, not the web master. We're
trying to decide if we should upgrade to Contribute 4 for the
entire staff that has full or partial editing permission. I know
those of you who are tech experts know what things like "CSS
rendering fixes" and "support for absolute image paths" mean. For
those of us who use Contribute daily and must make financial
decisions, could you elaborate a bit on exactly what that means to
users? Also, the deal breaker for us is whether this version of
Contribute fixes the frequent crashing problem. We all use Macs
because we are writers and editors, not techies, and didn't want
all the hassles that go with PCs. And our graphics people want us
to stay with Mac. But we lose a lot of time dealing with Contribute
crashes. Is that fixed in this version? Thank you.

I need to restore my iPod touch, but my computer was restored and my brother doesn't remember what the passcode was.

So I recently came back from vacation and I come back to find that my brother was messing around and changed my passcode. He doesn't remember what he changed it to and the computer that I originally used to sync it to got restored during my trip. Now I can't access my iPod at all because its passcode locked.
How do I restore it? When I try, it says we can't restore it because it's passcode locked.

Place the iPod in Recovery mode and connect to computer and restore via iTunes. The iPod will be erased. That is the way it is.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

TS4009 in my Imac I don't see the icloud icon, still have the mobile me and it doesn't allowe me to change that, what do i do please.

in my Imac I don't see the icloud icon, still have the mobile me and it doesn't allowe me to change that, what do i do please.

Please always state your operating system when you have a question. Lion 10.7.2 minimum is required for iCloud; the Preference pane does not appear in earlier systems.

Just got ios7 on iPhone but calendar doesn't list events like in ios6. You need to tap the date to see what is listed on the calendar . Can that be changed ?

Don't like calendar set up with IOS7. Can't see list of actual events on calendar as was the case with IOS6. If you have a dental appointment in October but can't remember the day ,you need to tap each day to see what us on whereas before you could just scroll down the dates showing a list what is on. Wish that could be organized as before. Is there a way to set it up as in ios6? Otherwise ios7 looks great .

Im not going to be much help because I don't know of anything else to besides take it somewhere that fixes electronics and see if they can get it off some how maybe if you take it to an apple store they can do something to get your information.

I keep getting a message on startup saying 'Do you want the application "KodakAiOBonjourAgent .app" to accept incoming network connections?' It says settings may be changed in the Firewall pane of Security? Doesn't matter what I click (Deny/Submit).

I keep getting a message on startup saying 'Do you want the application "KodakAiOBonjourAgent .app" to accept incoming network connections?' It says settings may be changed in the Firewall pane of Security but I don't see how. Doesn't matter what I click (Deny/Submit). The message still pops up on starup. I have a Kodak printer and am running Mavericks but I don't think it started when I upgraded.

Just fixed this on my machine, the easiest way to remove this pop-up assuming you are no longer needing that software to print is the following:
Open Finder
Go > Go To Folder...
Type In: "~/Library/Application Support"
Delete All Folders Named Kodak
Open System Preferences
Go to "Security & Privacy"
Click the lock and enter your admin password
Click the Firewall Tab
Go to "Firewall Options..."
Find KodakAiO
Right-click KodakAiOBonjourAgent or equivalent (I forget the exact name)
Click "Show in Finder"
Go Back to a folder and delete the Kodak Folder there.
Remove Kodak from Firewall Options by selecting it and clicking the " - " button the base of the list.
or
Open Finder
Go > Go To Folder...
Type In: "~/Library/Printers"
Delete All Folders Named Kodak
I'm going off memory, so If I forgot something let me know.

How do I see whats on my time capsule/or delete it completely? I haven't used it for 6 months, my wifi changed, and I want to start fresh with it.

I haven't used my Time Capsule in months. I have new wifi and forget my old login. How do I either see what's on it or wipe it clean? I want to make sure that its not making up regularly from my laptop.

Plug in by ethernet .. then you can find the wireless password and access the disk.
If you have no mac with an ethernet port buy the thunderbolt to ethernet.. well worthwhile purchase.
But TC are easy even with wireless.. reset it.. you can do a soft reset.. press in the reset button for 1 sec.. all passwords will go to default for 5min.. you can then access it and change them.. viola done.
You can factory reset it and just do a new clean setup.. you can see what is on the drive and erase it..
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.

Sister was using my iPod, she changed Apple id to hers, then forgot the iTunes password, now it's disabled she doesn't know what backup email she use or the security questions HELP can Apple reset my iPod?

sister was using my iPod, she changed Apple id to hers, then forgot the iTunes password, now it's disabled she doesn't know what backup email she use or the security questions HELP can Apple reset my iPod?

Is there a way to find my Apple ID Name if I can't remember it?
Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.
Forgotten Security Questions/Answers
You need to contact Apple by:
1 - Use the Express lane and start here:
https://expresslane.apple.com
then click More Products and Services>Apple ID>Other Apple ID Topics>Forgotten Apple ID security questions.
or
Apple - Support -form iTunes Store - Contact Us
2 - Call Apple in your country by getting the number from here:
http://support.apple.com/kb/HE57
or
Apple ID: Contacting Apple for help with Apple ID account security
3 - Use your rescue email address if you set one up
Rescue email address and how to reset Apple ID security questions
For general information see:
Apple ID: All about Apple ID security questions

I have a big problem! My ipod touch is stuck! it won't open, all I see when I open it is the itunes icon with a USB cable and an arrow! What can I do? I've tried connectingit with itunes, but itunes doesn't see it. plus i have windows 8

Can't connect my ipod toch to itunes!!! It doesn't see it! I use windows 8, don't know if that's the problem. Anyways, my ipod is stuck! Every time I open it, it stays stuck with the image of a USB cable with an arrow pointing towards an itunes icon. but whatever I do, my computer doesn't see it, and neither does itunes. What to do???!!!

The the remaining items of the following, you may have to let the battery fully drain.
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Unable to delete email from trash bin. How do I do this? If I select and chose delete, it doesn't. What am I doing wrong? My grand daughte is using my iPad and I don't want her to see some of the mail there.

Unable to delete email from trash bin. How do I do this? If I select and chose delete, it doesn't. What am I doing wrong? My grand daughte is using my iPad and I don't want her to see some of the mail there.

There are two ways that should work. When you are in the trash folder, you can swipe on the email in the list - left to right - and a red Delete button should pop up. Or you can select - Edit - at the top of the list of messages and then select the message and tap delete.
Not sure exactly how this works - but if you have restrictions enabled - especially since you let your grandchild use the device - that may be restricting what you can do in the mail app. Go to Settings>General>Restrictions. If you have it set to on - turn it off or see if you have mail restricted.

Search bar backgroub dont show what i write, can this be change or the color of the letters can be change to black instead of white so i can see what i write?

when i open my Firefox browser i got Google as my home page and search engine so i click at the search bar and start typing, but i cant see what i write. i think this is do to the background of the search bar and also to the color of the letters which is white.
i have been trying to change this but i don't find the tools to do it and/or i don't have the knowledge to do it, thanks for you help.

Are you using a theme or persona that may set the color to white?
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Such issues can also be caused by the "Keystroke protection" in Comcast Constant Guard.
"Configure Anti-Keylogging Settings" -> disable
*[[/questions/874709]]
*[[/questions/870165]]

I updated my iPad software to IOS 5, and now it doesn't see my WiFi. The IP addresses seem to be different on my "Sanders Family" network on my iPad than what shows up on my desktop

Help. I just updated my iPhone and iPad software to IOS 5. Now my iPad isn't connecting to my WiFi. It "sees" it, and the network name even shows up under WiFi, but it's like it just keeps grinding and grinding. Sometimes it will let me click on the network and see the IP address. When I can see it, the address on my iPad is different from the one showing up on my desktop, but I can't figure out how to change it on my iPad. Any suggestions to get me hooked back into my wireless network?

If the problem persists after you reboot as suggested by Ralph:
Trouble connecting usually means interference, or another WiFi on the same channel.
If you have any cordless phones, keyboards, or cameras, check what frequency they use.
From a MAC or Windows machine you can see what channel each of the available networks are using. Make sure your network is on a channel nobody else nearby is also using.

Itunes messed up my restore and now doesn't see my ipod. What should I do?

I performed a restore on my Ipod Touch (bought new a couple of years back) and itunes tells me there was an error and the restore could not be completed. Nice that it still manage to delete all my information, contacts and goodness knows what else (I chose to backup my files using the itunes function), btw.
Anyways, now my ipod just has the "connect to itunes" picture. My PC doesn't recognise my ipod, apart from Apple Mobile Device under USB controllers in the Device Manager, and itunes doesn't see or try to do anything with my pod so that I can use it.
I've tried this solution http://support.apple.com/kb/TS1538 but that didn't help and I reinstalled itunes and Apple Mobile Device Support, but to no avail.
What should I do? I'm using Windows 7 HP x64.

Put it in DFU mode.
It's a common thing among jailbreakers. No one else really needs it, but it should allow your iPod to take the official firmware of your choice.
Here is a copy from a jailbreak help guide I will not link.
Please note that this will not jailbreak your device, so back off, moderators.
Method (1)
* Attach the phone to the pc
* Turn the phone off
* Hold power and home together for *exactly* 10 seconds
* Release power but keep holding home until the pc beeps as a USB device is recognized.
* At no point will the display come on. Now your restore should work.

BAPI_ISUACCOUNT_CHANGE doesn't see what BAPI_ISUPARTNER_CHANGE changed

Similar Messages

Maybe you are looking for