BAPI_NETWORK_MAINTAIN how to specify link duration in percent ?

HI,
I'm trying tu use the BAPI_NETWORK_MAINTAIN to update data about activities.
I need to create links between activities.
When the unit of duration of the link to create is WEEKS, DAYS and etc. It works properly :
I fill table "relation" with :
   -network predecessor, activitye predecessor
   - network successor, activity successor
   - type of relaion (FS for example )
   - duration_relation_unit = WCH for example
When teh duration is in percent I try the same thing except that
   duration_relation_unit = %
but I have the following error message :
% is not a valid time unit for the duartion of the relationship
Could you please tell me how to flle relation table in case of duration_relation in percent ?
Regards,
Morgan

please, i would like to know that number to put in the field: i_method_project-refnumber
thx
Moderator message: please do not post in all upper case.
Moderator message: please do not post in all upper case.
Moderator message: please do not post in all upper case.
Edited by: Thomas Zloch on Apr 7, 2011 1:19 PM
Edited by: Marco Echino on Apr 7, 2011 1:32 PM

Similar Messages

How do I generate a pulse with a user specified puse duration, down time and repitition, and then out put to a graph?

How do I generate a pulse with a user specified puse duration, down time and repitition, and then out put to a graph and then to daq ports?
I used lab view in engineering class, but that was the extent of my usage and after fiddling around in lab view and looking on the web looking for solution, I could not produce desired results. My professor wants me to produce something that will output a pulse for a specified duration, then downtime for another specified duration and then repeat the process a specified amount of times.
I am using labview version 7.1
Thanks in advance.

Hello,
Are you using hardware (DAQ card) to generate this pulse or are you planning on doing this all in software. If you have a DAQ card in LabVIEW you can go to Help » Find Examples and then select Hardware Input and Output » DAQmx » Generating Digital Pulses » Gen Dig Pulse Train-Finite.vi. This will use a counter from your DAQ card to generate a finite number of pulses at a specified frequency and duty cycle. Give this a try, or let me know if you are not using hardware, and we can figure something else out.
Regards,

How can I link table KONV with table VBRP and VBRK using KSCHL field?

Hi experts,
How can I link table KONV with table VBRP/VBRK using KSCHL field so that items are fully filtered?
Thanks,

Hi,
If you do not want to specify it as hard code, then define a variable for it if you want to pass the value for it from the selection screen so that it will be dynamic. Code will be as follows.
select-options: x_KSCHL for T685l-KSCHL.
select kwert
           kbetr
           knumv
           kposn
           kschl
      from konv
      into CORRESPONDING FIELDS OF TABLE it_konv
      FOR ALL ENTRIES IN it_all
      where knumv = it_all-knumv
      and   kposn = it_all-b_posnr
      and   kschl in x_KSCHL. "Dynamic Selection as per the selection screen input
endif.
Hope this helps.
Regards,
Chandravadan

How can I add links to open xml and csv files stored in another location? Please advice how to place links in my frame maker document?

Hi,
I would like to know as to how can I add links to open xml and csv files stored in another location? Please advice how to place links in my frame maker document?
Kindly advice.
Thanks
Priya

Special > Hypertext > Command "open document" will do its best to open the target document inside FrameMaker, which may not be much help; Special > Hypertext > Command "message …" will use the application you specify. The user guide for 7.0 says this about absolute links, and I don't think anything has changed since:
For example, to start PaintBrush and open the Ship.pcx file on drive C you would use the command message system pbrush.exe C:/Ship.pcx
I've not often used a relative link, and not recently: the same source says
folder levels are separated by a slash / even in Windows and Mac
[relative links] FrameMaker searches for a relative pathname beginning in the folder that contains the current document
[absolute links] FrameMaker searches for an absolute pathname beginning at the top of the file system. In Windows, the absolute pathname begins with the drive specifier, a colon and a slash.

How to specify in the ISE mac-address with its description?

Hello :-)
I want to implement ISE 1.2.
We have a database of mac-addresses and their description (for example the phone with the Mac address, John).
When connecting the phone John to a wifi network, WLC checks its mac-address in the database and allows access.
How to specify in the ISE Mac address with its description?
In the endpoint settings in ISE 1.2 there is no description field. We have ISE1.2.1.198, vWLC 8.0.100, AIR-LAP1131, MS AD (Win2003).
How can I handle this situation? Any ideas?

This link http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_user_guide/ise_man_network_devices.html about managing network devices(router,switch), not endpoints(phone, notebook).

How to specify which of 2 wifi cards to use

Hi All,
I recently installed Arch Linux on a USB (not live, a persistant installation). I have 2 wifi cards: one that came with the laptop and is used via PCIe, which is an Intel Centrino Wireless-N 2200. It's awful. The other, which is a USB wifi card and which I want to use, is an ASUS USB-N10. I checked linux-wless.passys.nl to see if the N10 was supported, and it said it was, and also said: "Supported by the rtl8192su and r8712u staging drivers in the mainline Linux kernel. Firmware from userspace is required." I can't get wifi working properly in Arch Linux, which makes it impossible to progress because I can't install anything and am stuck in just using terminal. I don't know how to specify which card to use in Arch. Any help would be much appreciated.
Thank you for your answers in advance!

After running ip addr, it doesn't display names for the different devices in a way that I can tell which ones they are. The names that it gave me are: "lo", "enp3s0", "wlp4s0", and "wlp0s20u2". I know that 2 of those are virtual ports for wireless devices that aren't being used, but I don't know how to differentiate.
EDIT: Also, when I try to navigate to etc/netctl/examples/wireless-wpa, it says "Correcting wireless-wpa to ."
EDIT 2: "lo" seems to be a generic interface, and I've narrowed down the names so now I know that my two wireless cards are 'wlp4s0" and "wlp0s20u2". When I ran iwconfig, I got
wlp4s0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=15dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key: off
Power Management: off
wlp0s20u2 unassociated Nickname:"rtl_wifi"
Mode:Auto Access Point: Not-Associated Sensitivity: 0/0
Retry:of RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
lo no wireless exentions
enp3s0 no wireless extensions
I'm assuming that this means that the latter two interfaces are the unused virtual interfaces. Does this tell you anything important?
Last edited by TheAtomicGoose (2014-04-07 21:05:28)

How can i link from IR to ID

hi , all
while configuring objects in ID , how can i link design objects from IR into ID.
thanks & regards

Hi,
>>while configuring objects in ID , how can i link design objects from IR into ID
--> In the receiver determination u will be specifying
1 .Message Interface ( Has the Message Type and Message has the Data Type)
2. Interface Mapping ( Has the Message Types and the Message Mapping to be Done).
--> Also u import the ccBPM in the in the Integeration Process of ID
By these steps the design objects of ID is linked to IR.
Regards
Santhosh

(261680070) Q WWO-13 How can I link workshop to a different WLS instance?

Q<WWO-13> How can I link workshop to a different WLS instance?
A<WWO-13> Use the Workshop menus. Select the Tools menu, then choose Preferences.
Select the Paths tab and then specify the domain and server that you wish to connect
to.

Additional Information supplied by John Methot:
Unfortunately, that's not all there is to it. You also have to make sure
both the Workshop IDE and the WLS instance are looking at the same project
filesystem. This means you have to share the filesystem from the WLS
machine (typically) and mount it (or, in windows, map it) on the IDE
machine. Specifically, you want to share/mount/map the directory that is
the parent of the domain directory (so, be default,
c:\bea\weblogic700\samples). Then, in the preferences dialog, you have set
the "config directory path" that that mount point and then select the domain
("workshop"). Now you're set.
If you don't do this, things might sort of seem to work but won't. You'll
be editing happily away on the IDE machine, but running unmodified files on
the WLS machine (the real files).
Bottom line: there is no file transfer feature between the two machine in a
remote configuration. Both machines have to see the same file system.
"Adam FitzGerald" <[email protected]> wrote:
>
Q<WWO-13> How can I link workshop to a different WLS instance?
A<WWO-13> Use the Workshop menus. Select the Tools menu, then choose Preferences.
Select the Paths tab and then specify the domain and server that you wish
to connect
to.

How to specify a type of COM-object activation

How to specify a type of COM-object activation: in-proc, local server etc - in C# client? I want to use a .NET analog of CLSCTX_INPROC_SERVER constant. Documentation for used COM component insist that all types of activation are possible.

When you create an instance of a COM object using COM Interop, it is the equivalent of calling CoCreateInstance with CLSCTX_ALL.
(See COM Interop Part 1: C# Client Tutorial.)
If you don't like the automatic behavior, then Create the object manually (PInvoke CoCreateInstance) and just marshal the interface pointer to get a runtime callable wrapper by specifying
MarshalAs(UnmanagedType.Interface) on the result. (The DllImport signature provided at the pinvoke.net link above marshals it this way.)

How to attach link to thread

Hi,
How to attach link to thread and if any code to be copy and paste it in sdn how to do?
plz any one can suggest me i am not able to send these type of quereis.
Regards,
venkat

Hi,
when you are repling or creating thread see the right hand side you will find the hints
Copy Paste FOR YOU place your text between these For
* bold
+ + italics
_ _ underline
-- -- strike
Line: -
Heading 1: h1. ABC
Heading 2: h2. ABC
Heading 3: h3. ABC
Heading 4: h4. ABC
Heading 5: h5. ABC
Heading 6: h6. ABC
Link: [url] URL
Link: [Name|URL] Name
Link: [Name|URL|Tip] Name
Further Markup Possibilities
Markup/Result place on both sides
-> Displays the line as programming code place {quote) on both side
-> Displays the text "Hallo" in italics with a special background
{size:12}
-> Sets font size to 12
-> Sets font color to green
-> Sets font face to Courier
-> Displays link to forum 123
Loading Screen in Webreports?
-> Displays link to thread 12345
The specified item was not found.
-> Displays link to message 1234567
The specified item was not found.
-> Displays link to user 1234 (numeric ID)
Regrds
mahesh
To attach link click on button on the top of reply page(below preview buttons) you can check 'Spell check ' and Quote your message from the top links.

How to specify permissions to PCD

i want to know how to specify permissions to PCD content.
Thanks.

Hi Anubhav,
For any PCD object we can set permissions under their property editor .
Iview or roles or any PCD object has Proeprty editor to the right side which opens into diff dropdown namely, object, permissions, navigation , linking
We need to go for permissions option from the drop down to set permission for that particular PCD object. By default object will be displayed , which gives rge gen info abt the PCD object
Navigation property in teh drop down gives the appearance of the PCD objects and so on..
Hope this was useful
Good Luck!
Regards,
Shaila

How to update link and import data of relocated incx file into inca file?

Subject : how to update link and import data of relocated incx file into inca file.? The incx file was originally part of the inca file and it has been relocated. ------------------- Hello All, I am working on InDesignCS2 and InCopyCS2. From indesign I am creating an assignment file as well as incopy files.(.inca and .incx file created through exporing). Now indesign hardcodes the path of the incx files in inca file.So if I put the incx files in different folder then after opening the inca file in InCopy , I am getting the alert stating that " The document doesn't consists of any incopy story" and all the linked story will flag a red question mark icon. So I tried to recreate and update the links. Below is my code for that //code start***************************** //creating kDataLinkHelperBoss InterfacePtr<IDataLinkHelper> dataLinkHelper(static_cast<IDataLinkHelper*> (CreateObject2<IDataLinkHelper>(kDataLinkHelperBoss))); /** The newFileToBeLinkedPath is the path of the incx file which is relocated. And it was previously part of the inca file. eg. earlier it was c:\\test.incx now it is d:\\test.incx */ IDFile newIDFileToBeLinked(newFileToBeLinkedPath); //create the datelink IDataLink * dlk = dataLinkHelper->CreateDataLink(newIDFileToBeLinked); NameInfo name; PMString type; uint32 fileType; dlk->GetNameInfo(&name,&type,&fileType); //relink the story InterfacePtr<ICommand> relinkCmd(CmdUtils::CreateCommand(kRestoreLinkCmdBoss)); InterfacePtr<IRestoreLinkCmdData> relinkCmdData(relinkCmd, IID_IRESTORELINKCMDDATA); relinkCmdData->Set(database, dataLinkUID, &name, &type, fileType, IDataLink::kLinkNormal); ErrorCode err = CmdUtils::ProcessCommand(relinkCmd); //Update the link now InterfacePtr<IUpdateLink> updateLink(dataLinkHelper, UseDefaultIID()); UID newLinkUID; err = updateLink->DoUpdateLink(dl, &newLinkUID, kFullUI); //code end********************* I am able to create the proper link.But the data which is there in the incx file is not getting imported in the linked story.But if I modify the newlinked story from the inca file,the incx file will be getting update.(all its previous content will be deleted.) I tried using Utils<IInCopyWorkflow>()->ImportStory() ,But its import the incx file in xml format. What is the solution of this then? Kindly help me as I am terribly stuck since last few days. Thanks and Regards, Yopangjo

>
I can say that anybody with
no experience could easily do an export/import in
MSSQLServer 2000.
Anybody with no experience should not mess up my Oracle Databases !

How do i link a flash file to a web site in dreamweaver 8

This is a multi-part message in MIME format.
------=_NextPart_000_0059_01C7A541.7942B2A0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Hi
How do i link a flash file to a web site in dreamweaver 8
Thanks
------=_NextPart_000_0059_01C7A541.7942B2A0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0
Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.6000.16448"
name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV>Hi</DIV>
<DIV>
How do i link a flash file to a
web site in =
dreamweaver=20
8
 
Thanks</DIV></BODY></HTML>
------=_NextPart_000_0059_01C7A541.7942B2A0--

In Flash. There is no way to apply an HTML link to a swf
file.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Dave" <[email protected]> wrote in message
news:f3s8f0$cla$[email protected]..
Hi
How do i link a flash file to a web site in dreamweaver 8
Thanks

How to specify -preview when launching via AppleScript

I have an InDesign Server CS5.5.I have a shell script that waits for xml files to be placed into a certain directory on the server. When it sees a file in the folder it launches an applescript that controls InDesign Server. I need to know how to specify the -preview option for the InDesign Server binary so the files generated by the server will have previews when they are opened in InDesign client. The apple scripts look like this:
tell application "InDesign Server"
-- do some stuff
end tell
Where/how would I specify the -preview option. I see nothing referring to the -preview option in the Library for indesign.

There's two ways to set it:
1) in command line when you launch the executable, there's a preview option. I don't remember off hand the exact syntax.
2) In the script itself (using Javascript syntax -- Applescript would be similar) app.serverSettings.imagePreview = true;
Harbs

How can I link two frames via a button on one of the frame?help Plz

Ok,here is the problem. I got two fully working java frames,each has different funcion. On one of the frames(my home Frame" Frame 1" ) i got a button called "Add User", when i press it i should then get my other frame(Frame2) to popup/run. in Frame1 i got this code as action for the add user button.Note: each Frame have thier own Main class.
public void actionPerformed (ActionEvent e)
if (e.getSource()==jbtnAddUser)
// new Frame2(this,"hshsh",jb);
////////////// The commented line is where i am not sure what to put in there, Frame1 is the name of my Frame 2 class......
Please could anyone tell me how do i link Frame 2 to Frame 1....i appreciate it....Max

You can create both together on pgm startup (instaniation of the class).
Next for frame1 - I'll call it - you can setBounds(int, int, int, int) and setVisible(true); When you press the button on frame1 to get frame2, you can then do frame1.hide(), followed by frame2 setBounds and setVisible. Finally, when you are done with frame2 you can do frame2.dispose() and frame1.show(). try that.

BAPI_NETWORK_MAINTAIN how to specify link duration in percent ?

Similar Messages

Maybe you are looking for