BAPI_PROCORDCONF_CREATE_TT Goods Movement Posting Problem

When performing a process order confirmation via the BAPI_PROCORDCONF_CREATE_TT, I'm experiencing some difficulties with the goods movements.  Specifically, when attempting to post a goods receipt to the order via a 101 movement along with a goods issue to the order via a 261 movement, the movements are posting as two separate material documents instead of a single material document.  Secondly, the movements post under the transaction code COGI (from the MKPF-TCODE2 field) which seems a little odd to me as I was expecting something specific to the BAPI or at least COR6N.
For others utilizing this BAPI with goods movements specified, what transaction code do the materials post under and is there some config or setting directly in the BAPI which I'm missing to ensure goods movement postings occur under a single material document?
Thanks in advance for any/all assistance,
Randy Lintz
Foster Farms
Livingston, California

Hi Randy,
Please check with T-Code CORK & also check hte confirmation configuration in OPK4.
Check the "All Components" under Generally Valid settings Tab.
Thanks

Similar Messages

  • Goods Movement Posting with UII

    I am trying to post a material document using BAPI_GOODSMVT_CREATE with external assigned serial number and UII (Unique Item Identifier).
    In this bapi, the GOODSMVT_SERIALNUMBER table does have SERIALNO that I can populate serial numbers. But it does not have any UII I can enter unlike MIGO transaction.
    Is there any bapi or function module that allows me to post goods movements with UII??

    Can you do this manually in your system via CO11?  Our system is set up so that during order confirmation only goods issue / returned can be entered in the confirmation screen.
    So when I want to confirm and goods reciept an order - I would you two BAPIs.  The one in your post +
    BAPI_GOODSMVT_CREATE.
    I

  • Goods movement : posting periods

    Hi,
       In goods movement, i am getting an error:
    "Posting only possible in periods 2007/05 and 2007/04 in company code 1200.
    Does anyone know in which transaction i need to fix this?

    Hi Vamsee ,
       Use The Transaction MMPV (Close Period for Material Master Records) . Here you can update the next valid date for posting for a particular Company Code.
    Hope It helps
    Regards,
    Leo

  • Supply Area Goods Transfer Posting Problem

    Dear SAP Gurus,
    I am facing a problem in which material has to be issued by transfer posting through movement type 541 to Subcontracting Vendor.
    The material is to be issued from Supplying Area.
    When transfer posting is initiated for the PO, material is not getting issued from Supplying area whereas all other BOM materials are being picked up.
    Please guide me where can this problem be?
    Thanks & Regards
    Manav Anand

    Hi,
    I hope you are using ME2O or MB1B transaction with 541 mvt type. As per Subcontracting scenario you are supposed to sent the BOM mateials only to your subcontracting vendor and finally supposed to get the material which is raised in the PO.
    Now please let us know where you have been stuck so that we will be able to help by providing our explanations.
    Regards,
    DilL

  • Confirmation reversed Using T code CORS, goods movement not posted

    Hollo Everybody
    i am facing a problem pl help me. I have posted a corfimation by TCODE CORK , and subsequently reversed by CORS.
    while forward goods movement posted the reversal did not posted against the Process order. it is not appering in COGI listing.
    I can't close the process order. pl guide me to post the unprocess reversal.
    Regards
    Debashish

    Dear Debashis,
    Kindly check the  material movements in MB51. Enter the date of confirmation  as well as confirmation cancellation as selection criteria. Please carefully see all the movements .
    Then analyze which movements are not reversed. 
    And in CORT -Display confirmation You can see the "Cancel" indicator ticked or not for the confirmations you need.  If the confirmation reverse is successful then this indicator must be ticked there automatically by the system.
    Regards,
    Girish

  • Goods movement in Confirmation IW42,

    Hai all PM gurus,
    I have activated the back flush indicator in the Material master record.I have maintained the components in the task list also.In the maintenace plan for that the particular task list, the componetns also copied - flagged the check box back flush indicator manually in the components screen. While doing confirmation by IW42, the goods movements are not posted?. In the components over view screen also, the material is not copied?. What might be the problem?. Any configuration required.

    hi
    how you came to know the goods movement has not posted.while confirming definitely it will show message as confirmed and goods movement posted.
    kindly read the sap definition for ALL components
    All components on goods movements overview
    Specifies that in the goods movements overview, all components are to be displayed that are assigned to the operation in question. The system posts the withdrawal of all components displayed in the overview as a backflush.
    Use
    You use this indicator to decide which components are displayed in the overview for individual time confirmation:
    If you set the indicator, the system displays all the components regardless of whether or not the backflushing indicator is set for the component in the order.
    If you do not set the indicator, the system only displays the components for which the backflushing indicator is set.
    In addition, the material produced appears in the goods movements overview if it is to be placed into stock using an automatic goods receipt. You specify whether or not an automatic goods receipt is to take place in Customizing for the operation control key or in the production scheduling profile.
    Dependencies
    The indicator has no influence on the overall completion confirmation.
    regards
    thyagarajan

  • Message while performing goods movements in PI sheet

    Dear experts,
    Kindly suggest way to populate the message that system provides while performing goods movment using co11n and cor6
    at the time of posting the message through PI sheet.
    System usually populates message like 6 goods movement posted 1 failed using co11n or COR6 same needs to be populates while posting the messages using PI sheets.
    Thanks in advance for your inputs and help..
    Regards,
    Nitish

    dear experts ,
    please give your valuable input.
    can we use FI_PERIOD_CHECK ?
    regards
    satish

  • Outbound IDoc for Goods Movement

    HI
    We need to generate XML files for goods movement posted in SAP at Goods Receipt (MIGO) and Post Goods Issue (VL02N). Requirement is asynchronous update where the receiving system will poll the xml file at the end of the day.
    I have not been able to find any standard outbound idoc for goods movement.Can someone advise how they tackled any similar requirement? Any other approach also appreciated.
    Thanks
    Sriram

    Answer to the question, which would be useful to all.
    <b>MIGO</b>
    MB_CF001 - Customer Function Exit in the Case of Updating a Mat. Doc.
    This exit is called on update task, populate segments (edidc & edidd) of WMMBID02 (WMMBXY message type) and use MASTER_IDOC_DISTRIBUTE. Also you need to maintain the ALE Distribution model in WE64 for this message type.
    Inside the code you can restrict based on movement type. No need to issue COMMIT.
    <b>VL02N</b>
    You can use BAdi: LE_SHP_DELIVERY_PROC to perform this.
    Create Implementation and use the method SAVE_AND_PUBLISH_DOCUMENT.
    Hope this help to others as well.

  • CORUAWFP "An application for posting goods movements is already active"

    Hi Experts,
    We have a strange message- we don't get it why this happnes so often.
    In our system, production order confirmatins are done vai BAPI (BAPI_PRODORDCONF_CREATE_TT) and we are executing CO1P (CORUAWFP) every 10 minutes in order to avoid "Intended Goods Movements (GRs are suspendded, because of Lock sutuation)" .
    The problem is when CO1P(CORUAWFP)) is kicked, sometimes a strange message is displayed  ,"An application for posting goods movements is already active" , and the job ends abnormaly. We are sure we don't run CO1P  (CORUAWFP) in parallel.
    Why this situation happnens?
    Thanks in advance.
    Best Refards,
    /Hiro Okamoto
    Edited by: Hiro Okamoto on Aug 27, 2011 5:36 PM
    Edited by: Hiro Okamoto on Aug 27, 2011 5:37 PM
    Edited by: Hiro Okamoto on Aug 27, 2011 5:37 PM

    The message simply means there are 2 or more programs being executed simultaneously accessing the same set of data & hence a locking occurs or the table lock is not getting released within time so that the next program can get a lock.
    Get in touch with your system admin & ask them to monitor & let you know which programs are locking. Once you have that info, you can then change the schedule of the programs to prevent locking.

  • Problems with goods movements cancelling network confirmations

    Hello experts,
    I'm having some problems with goods movement when cancelling network confirmations.
    I assign a component for a operation in the project builder (CJ20N). Then when I execute a confirmation for that operation in CN25 everything works correctly, I can assign the time for the confirmation and SAP automatically carries the component assigned to the operation. Once I have done the confirmation the goods movements and the hours have a correct account assignment.
    The problem is that if I cancel this confirmation, the hours are correctly cancelled but the component is still there. If I try to cancel the goods movement with MIGO it is no possible because the system says that must be cancelled with the corresponding transaction (CN29) but, as I have said, the system does not cancel it.
    On the other hand, If the goods movement goes to COGI transaction and then I post-process the error, If later I cancel the confirmation, everything works correctly.
    Does anybody know why this could happen?
    Thanks and regards
    Laura

    Hi
    I think this question was raised earlier also. The best way is to allot a fixed time slot for your users so as to avoid clash. I suppose i explained that the master data of any material is stored at one place only and if you schedule a background job for this then all your good movement transaction will be in que and performed in orderly manner.
    If automatic posting is not possible then use the time slot method.
    Krishna

  • Goods movement using bapi BAPI_PROCORDCONF_CREATE_TT

    Hi,
    I am using the bapi BAPI_PROCORDCONF_CREATE_TT to confirm the process order and do automatic goods movement. The problem I am facing is it is confirming the process order but goods movement, at times is working and at times is not doing goods movement. Do not know whether its a data issue or I am doing something wrong in the bapi. Pls help on this.

    Hi Vishal, Thnx for the reply, actually what is happening.
    step1: I am creating a process order in COR1.
    step2: I am releasing the process order in COR2. Batch is getting assigned automatically.
    step3: In tcode COR6N when I am entering the process order, the yield field is getting populated with the order quantity ( quantity created in COR1 ). Then I am moving to goods movement button. There at times I am getting material with movement type 261, then GM is not happening, but if I delete that partucular material with movement type 261 and click save button GM is done successfully.
    This when I am doing through bapi, I am getting the confirmation but no GM. Hence in AFRU-WABLNR is coming blank

  • Posting a Goods Movement in SAP Retail Store

    In SAP Retail Store, under Inventory Management>Goods Movement>Other Movement, when entering articles and quantities, if you want to use multiple Bus. trans. or Reason for Movmt. values, you have to post them separately.  This requires you to post, exit out and then go back in and post again, etc. 
    Is there a way to post multiple Bus. trans. or Reason for Movmt. values on the same screen?

    Hi,
    Is that stock is tagged with sales order ?
    How you have HU in non HU managed location ??
    If you want to move stock then use t code HU02 and create HU in non HU manged location mentioning destination location as HU managed .
    Regards,
    Vishal

  • Create a subsequent Goods Movement for a transfer posting

    Hi Team,
    I have a scenario where the users will create a Good Movement document for transfer posting. The Stock of Material "A" is transferred to stock of Material "B" using the movement types 561 etc. Now the quantity is reduced from unrestricted stock of "A" and posted to "Stock in Transfer/Transit" of "B". The requirement is to create another Goods Movement document immediately after the above transfer posting is completed and use movement type 101 to post the same quantity to unrestricted of "B".
    I tried searching for use exits and could not find a relevant one "After Save" for goods movement online transaction. I found the MB_GOODS_MOVEMENT_UPDATE Badi but don't know how to create another goods movement document while in the update task. I'm concerned that if I call a BAPI or BDC inside the update task, it might conflict with the current transaction (transfer posting). Looking for your guidance.

    Hi Deepali,
    You can use the userexit ' ZXMCBU02 '  to write your own code. This user exit gets triggered for almost all the goods movement transaction.
    There is also a very similar BADI which you can use which gets triggered for every goods movement transaction.
    I would like to know the BADI feel free to let me know. I think the above user exit should server your purpose.
    Hope this is useful for you.
    Cheers
    VJ

  • Problem with reverse goods movement

    Good Morning.
    I faced a problem with "schedule line" for an item in a sales order.
    I've an order quantity of about 14.000 pieces.
    I've created a partial outbound delivery for 8.000 pieces, but then for a problem, I made a "reverse goods movement" with VL09 for all 8000 pieces.
    When I came back into item's schedule line, I see in "Delivery quantity" column that is not considered the reverse goods momevent.
    I see that delivery quantity is still 8000.
    Can You give me some suggestion??
    Regards.

    There is no trasfer order in Sales Document Flow.
    Sales Order 10600587 / 10               12.12.07           14.000,000  NR      Completed          
    Delivery  8020600166 / 10                12.12.07           14.000,000  NR      Being rocessed    
    Picking request 20071212                   12.12.07           14.000,000  NR      Completed          
    GD goods issue:delvy 5500004772 / 1        12.12.07           14.000,000  NR      complete           
    RE goods deliv. rev. 5500004773 / 1        12.12.07           14.000,000  NR      complete           
    Delivery quantity is still 14000.

  • Problem with goods receipt posting - edi

    Hello,
      Iam using MBGMCR/MBGMCR02 BAPI_IDOC_INPUT1 for posting some goods movements.
    Through the same idoc i will be receiving a returns order number and the item details.With that i need to post the GR for the returns delivery posting the stock in returns.
    How can i automate this process when i use the sales order no and the movement type as 915 it errors out saying  goods receipt not posssible for 915 iam using mvt code '05'
    also i could not find a stock type indicator for returns stock...
    can any one help...
    thanks
    larry

    Better you check with SD Functional consultant . the error message clearly said that. "good Reciept not possible with movement type 915"

Maybe you are looking for