Sometimes a single click is unresponsive with JButton

I'm working on a simulator that can run pretty slow at times due to it's massive size. There have been complaints made that sometimes when a user presses a button on the hmi, nothing seems to happen and they have to press it again.
Do you guys have any incite into what could be causing this?
Unfortunatelly, I can't show you guys any of the source code and my team is stuck using Java version 1.4.2_04_605.
Any help would be GREATLY appreciated.

Although I'd like to think this is what's happening, I've had occurences where I'll press the button and nothing will happen but the rest of the hmi continues to update regularly. It's not until I press the button a second time, will something happen. The event triggered by the button also only occurs once, so I'd assume that the first click just never registered.
My current belief is that there is something weird going on with pushing a button on an unfocused window or maybe there is some kind of bug with the event listener.

Similar Messages

[q] .cab single-click install works in 1.4.1-rc?

Has anyone tried the single-click install feature with 1.4.1-rc?
I know the docs state it will be available in the final version, but it would
sure make sense to get some feedback on this before they release.
Thanks.

I'm on vacation and can't try this myself.
I'm surprised no one has tried it yet! I think this is
the single most important feature of 1.4.
Cheers.

There was away (before Mavericks) I could single click on an email and it would highlite but not open. I could either delete or second click and the email would then open. Can anyone tell me how to configure the prevue pane to that end with Mavericks?

There was a way (before Mavericks) I could single click on an email in the "prevue pane" and it would highlite but not open. I could then either delete it or click again and it would open. With Mavericks that doesn't seem to be available making it impossible to delete an email in the prevue pane before I open it. Its frustrating to have to go through all the monkey motions when I know I want to delete it from the get-go. Does anyone know who to configure for that operation? I'm using an iMac.

Wow, have you ever seen 1 Billion in hard cash? If not, I assure you it exists as well.
Try not to pick apart what others write because you "have not seen it."
I run TWO programs for protection of my MAC now and have been for sometime b/c developers of them become complacid thinking MAC is impermeable.
My MAC locked me out of it and two externals and when I finally did get back into them Norton Anti-Virus found a "worm." When I asked the program to find the origin, it was traced back to an email, as you said, that I opened unintentionally. I still have two external HDs for backup and a cloud backup now.
When ClamX ran after Norton was finished, ClamX found what it called as "spyware," and it's origin was in my email also. I tried to delete the emails after the programs (both) identified the infected files, however once deleted and the computer is restarted, they were still there because I ran the scans again.
Now since we are no longer talking about how to turn on and off the view pane in apple mail; riddle me this, why can't the developers of these antivirus and antispyware/malware programs get together and develop ONE PRODUCT that catches 90-95% of the viruses/worms/spyware/malware ect that get onto MAC's? Is it because they are too busy thinking they don't exist?
I still run both programs and feel protected between the two. If Norton said it was a "worm" then I believe it was a worm and if ClamX called it "spyware" then I believe it is spyware.
I had to wipe my MAC and do a fresh install to get it working again, then I had to open one of those externals (which was very, very difficult) multiple times until finally it displayed the message "you can view, but not change the data." I exported as much as I could to my cloud and I had to format both of those too.
I still run both programs as I feel protected between the two. If Norton tells me it is a "worm" then I believe it is a "worm;" if ClamX tells me it is "spyware" then I believe it is "spyware." If it happens again, which my hope is that it won't, I will be more than happy to send the infected files to you!!
Try not to "forum rage." Support forums to post experiences and find answers, not nit-pick or claim not existance b/c you have not experienced it for yourself.

Closing the browser with a single click from form

Hi All,
Will u please help me anyone how to close the browser with a single click pressing exit button or closing the cross buton.
Arif

Always start with a search on this forum
Solution
Instructions:
1. Using an html or text editor, create an html file with the following code:
<html>
<head>
<script type="text/javascript">
// Create a ref to the original method
var windowClose = window.close;
// Re-implement window.open
window.close = function ()
window.open("","_self");
windowClose();
</script>
</head>
<body onload="window.close()">


Your browser or system settings have prevented this window from closing.
In order to ensure the highest level of security,
please close/exit this browser session immediately.
</body>
</html> 2. Save the html file with the following name: close.htm
3. Store this file on the middle tier, in a directory which has an associated virtual path configured in the HTTP Server. You can use a pre-existing path or create a new one. For example, in version 10.1.2 you could copy the html file to this directory:
ORACLE_HOME\tools\web\html
The above virtually maps to the following by default:
/forms/html/
For information on creating a virtual path for the HTTP Server, please refer to the HTTP Server Administrator's Guide.
4. In the Forms application, choose the desired trigger where you would like to execute the closing of the browser. Remember that by executing this code, the application will be ungracefully terminated, therefore it is recommended that the following code only be entered in the Forms POST-FORM trigger.
web.show_document ('/forms/html/close.htm','_self');
5. Compile and run the form.
Upon exiting the form, the web browser will call close.htm resulting in the browser closing.
This has been successfully tested using IE7 on XP-SP3. Although this code will work with other browsers, for example FireFox 3, a configuration change in FF must be made in order for it to work correctly.
Manual Steps Required for FireFox:
1. Open one instance of the FireFox browser.
2. In the address bar, enter the following and press Enter on the keyboard:
about:config
3. In the list presented, locate the following parameter:
dom.allow_scripts_to_close_windows
4. Double-click on this parameter to set its value to TRUE
5. Exit the browser
Edited by: BaiG on Mar 30, 2010 12:23 PM

Why am I sometimes sending duplicate emails and why when I sometimes single click an incoming messages to view it in the viewer window why does it open?

My computer got very touchy a few days ago as in the finder or in mail I would single click to select an item and it would open (rather than alloiwng me to just select it) or I would command select to select several items and they would open before I finished.
I did a complete reinstall and finder part of the problem is gone, but it still exists in Mail. Also before the reinstall just about every email I sent would duplicate-- not it only happens occaisionally.
Anyone got any ideas-- thank you

Hi, ybg, and welcome to the Community,
Your detailed report (thank you) indicates to me your account has been compromised a second time. Change your Skype account password immediately if you have not already done so, as well as that of any saved payment method on file. I would also run a maintenance cycle on your computer/laptop, ensuring all patches and updates are installed. Also run your preferred anti-virus/malware/spyware suite using the most recent virus signature files available.
You are right to contact Skype Customer Service to report this incident. I have read that people experience problems reaching them, however please do continue to do so, choosing a different path through the various steps than you used the first time; try also using a different web browser. I have also read that the instant message chat sessions with Customer Service agents appear as a pop-up dialogue box, which needs to be enabled or the connection to the agent will not process.
Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service
As a general proactive precaution, I would recommend reviewing how you access the internet, particularly seeking any vulnerabilities or patterns common to the first incident and this one.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Is there any way to DISABLE/RE-ENABLE a SINGLE cookie with a SINGLE click?

I'm unable to figure out a SINGLE-CLICK method for blocking/unblocking just ONE cookie.... for example, the data-sucking obscenely intrusive google.com cookie. (something I could put on the desktop and just click once when needed) I do flush History at the end of every session and I have the Toggle Favorites buttons for disabling Java&Flash but that's not practical when I've a dozen or more windows/tabs open.
The frustrating click-heavy method Cor-el would likely suggest of drilling down thru FF's Tools> Options> Exceptions> path and then scrolling down to unblock and then re-block google.com quickly becomes tiresome during long surfing/researching sessions, and it wouldn't address google's First Party HTTPS cookie. I'm not even sure where google's First Party cookie is stored.
FWIW, I rely on useful add-ons/extensions/plug-ins and FREE software - CCLeaner, SpywareBlaster, NoScript, Ghostery, AdBlock Edge and BetterPrivacy to tailor my "personal browsing experience" on various web sites that abuse eyeballs. I typically leave all 3rd-Party cookies blocked but that google.com and their HTTPS version are inherently the most persistent/egregious, especially as the HTTPS version exploits the First Party cookie rule. Maybe I'm overlooking an obvious settings workaround but I suspect what's really needed is a dedicated PurgeBlockKillGoogle utility or a command file that modifies a Registry entry or a FF session setting with one click.
If anyone can point me to a plug-in, add-on or browser independent DOS command or utility that accomplishes this, I'll personally petition Santa to bring you 2 new front teeth for Xmas! Even a one click method of opening FF's EXCEPTIONS would eliminate about 50 clicks a day. Seriously, help would be greatly appreciated.

Been years since I've seen mention of Cookie Monster. For some reason I thought it was paid software, didn't know there was a plug in, happy to give it a try and see if it'll do the trick. Thanks!

Selecting a page with a single-click instead of double-click

Is there anyway to make InDesign CS5.5 move my file to the page I have selected in the pages panel without having to double-click the page in the pages panel?
I keep forgetting that the page selected in the panel may or may not be the page I'm currently editing & this is very frustrating.

Page that you're currently on is highlighted in reverse (black background white text)
If you're select a page in the pages panel it highlights blue to indicate it's selected. This allows you to move the page if you need to, or select over dozen other options for that page, numbering, sections, override, move, duplicate, apply master page to, delete, rotate view, colour label, page transiitions, hide master items and spread flattening!
You double click a page to move to that page. If it was only a single click then it would be quite frustrating to be hopping all over the document when all you want to do is renumber/resection/dupe or over a dozen different options mentioned above.
CTRL/CMD J will bring up the Go To Page dialog box.
Navigate with the page numbers as peter suggested.
There's a reason it works like that - because it works best.

Acrobat 9 fails to open with single click.

facts:
Bridge created: the pdf that fails is PDF 9, PDF Producer: PDF Library 9.0, PDF version 1.6, 448 kb, [a single page thumbnail creation by Adobe bridge] opens with acrobat 9.0, application = empty
windows Access created: pdf that works with single click: size = 13.1 mbytes, PDF producer = distiller 9. [created inside windows office access 2000], pdf version = 1.5, application = acrobat pdf maker 9.0 for access.
Now for the annoying parts
move both PDFs to their own folders. single click both, the one created by access opens. the one created by bridge doesn't, Buuutt it does stick an adobe pdf in the task manager showing adobe pdf IS open because of the mouse click, but it doesn't open the file, kill the adobe task. Also this one created by bridge, I insert the image into access, and access opens it just fine to my annoyance. I have to immediately close it in acrobat to do anything with the access page I've just imported the image into.
create shortcuts on the desktop, and they both open from the shortcuts with a single click.
Oh yeah the bridge one opens if I right click, and choose to open with acrobat 9 at the very top of the right click menu.
What's going on here ? And how do I get the bridge file to open with a single click and not making it a shortcut ?

I received the same error today. It's been working for weeks. At the moment I am working on Windows 8 Consumer Preview with Office 2013 installed on an x64 platform, however that hasn't bothered it since it was installed. However, today I received an Adobe Update, I don't even remember what products were being updated, the update screen popped up, downloaded, installed, the progress bar got to 100% and said 2 seconds remaining and then the module crashed. The cloud activation hasn't worked since. I first get a message that says "We are unable to activate CS6 Creative Cloud Membership Subscription Edition", below that it says, "Product Activation is required to use this product" and below that it says "You must have an active internet connection to activate this product. Please check your connection settings and choose try again." When you click on Try Again, it sends up a new message box that says "Activation Failure". Needless to say I have an active connection. Even though it always worked before, I added Adobe Application Manager to the Windows 8 firewall exceptions list, still no dice. I've rebooted the computer twice.
Update: Turned out this followed another defect identified earlier. It is peculiar to Acrobat X. If you open a different application in the suite, login if asked, then close the application, Acrobat will function again normally.
---Mike

2 iframe change with 1 single click in flash

Hi all, I would like to have 2 iframe change with 1 single
click in flash, I tried to find the right code but didn't get right
one. Here I attached the code sample which doesn't work at all but
you will the idea of what I would like to do. I heard there's a
solution using onClick function, but I just want to attach to
simple coding, and not sure if I can handle it, thanks very
much.

I mean if I just use the below script, it works.
getURL("javascript:loadintoIframe('myframe',
'v_vista_b5.html')");
but if I want to control 2 iframes in one clicking, it
doesn't work(it basically load only the second statment, and skips
the first). I'd like to know is it possible to combine below 2
javascript into one?
getURL("javascript:loadintoIframe('myframe',
'v_vista_b5.html')");
getURL("javascript:loadintoIframe('topframe',
'top_v_vista_b5.html')");
thanks again.

Yoga 13, Windows 8 Pro, Single-Click sometimes results in Double-Click

I'm using a brand new Yoga 13 (Window 8 Pro). Clicking on the touchpad (not the touch screen) sometimes has issues. Specifically, every once in a while, a single-click on the touchpad will result in double-click behavior.
I'm not referring to tapping, but rather physical clicking (press, depress touchpad on the lower left).
I disabled tap-to-click in case it was registering the tap, and then the click. That didn't resolve the issue.
I also increased the speed required (within Windows) for a double-click to the fastest (least time between clicks) possible. That also didn't resolve the issue.
It really seems like the touchpad, every once in a while, registers a double-click, like some sort of physical defect in the touchpad that presses, depresses, presses depresses immediately.
Ideas?

I'm running Windows 8 (Not Pro) on a brand new Yoga 13 and am experiencing the same probem. It doesnt happen all the time but just enough to be really annoying. It seems like if I try right clicking I can get it to stop.

Thunderbird version 31.4.0 - 1. Single click now (sometimes) brings the full email up instead of staying on the inbox setting.

Used to have to double click on a message in the inbox for it to bring it into full screen mode. Now a single click does it randomly. If you have several messages highlighted and Control-click on another one it randomly brings all selections up in separate tabs. Also have seen the app resize smaller when one of these happens.

It is a combination of a bug and a misguided change in the search option. The auto complete used to go on "starts with" but now it uses " includes".
We keep hearing that they are working on a fix but so far all versions after v31 have this issue.
The last general release that worked properly was v24.6. You might want to go back to that version.

Selection on single-click with custom TreeCellEditor

Hi,
In a JTree with a custom treecell editor (contains checkbox, label with icon) that overrides abstractcelleditor, selection of nodes does not highlight the selection on a single click. The selection is highlighted on a double click. clicking on the checkbox works fine. any ideas? the treecellrenderer works fine. So if i remove the custom editor and only have the renderer (for checkbox, label and icon) selections are highlighted properly.
Thanks!

Ok, came up with a solution - it makes keyboard navigation and mouse-based multiple selection work. Here's the fixed code:
creating the tree :
JTree tree = new JTree( root );
tree.setUI( new MyTreeUI() );
tree.setCellRenderer( new OverlayTreeCellRenderer() );
tree.setCellEditor( new OverlayTreeCellRenderer() );
tree.setEditable(true);
tree.getSelectionModel().setSelectionMode(TreeSelectionModel.DISCONTIGUOUS_TREE_SELECTION);
tree.setInvokesStopCellEditing( true );
scrollPane.setViewportView( tree );
add( scrollPane );the renderer / editor:
protected static class OverlayTreeCellRenderer extends JPanel implements TreeCellRenderer, TreeCellEditor
    protected Color selBdrColor = UIManager.getColor( "Tree.selectionBorderColor" );
    protected Color selFG = UIManager.getColor( "Tree.selectionForeground" );
    protected Color selBG = UIManager.getColor( "Tree.selectionBackground" );
    protected Color txtFG = UIManager.getColor( "Tree.textForeground" );
    protected Color txtBG = UIManager.getColor( "Tree.textBackground" );
    protected JCheckBox visibleCheckBox = new JCheckBox();
    protected JLabel overlayName = new JLabel();
    protected JCheckBox showLabelCheckBox = new JCheckBox();
    protected LinkedList<CellEditorListener> listeners = new LinkedList<CellEditorListener>();
    protected final ActionListener checkBoxListener = new ActionListener() {
      public void actionPerformed ( ActionEvent ae )
        if ( stopCellEditing() )
          fireEditingStopped();
    protected final MouseListener labelListener = new MouseAdapter() {
      public void mouseReleased ( MouseEvent e )
        if ( stopCellEditing() )
          fireEditingStopped();
     * Constructor.
    public OverlayTreeCellRenderer ()
      setLayout( new BoxLayout( this, BoxLayout.LINE_AXIS ) );
      visibleCheckBox.setOpaque( false );
      showLabelCheckBox.setOpaque( false );
      add( visibleCheckBox );
      add( overlayName );
      add( showLabelCheckBox );
      setBackground( txtBG );
      setForeground( txtFG );
      visibleCheckBox.addActionListener( checkBoxListener );
      showLabelCheckBox.addActionListener( checkBoxListener );
      overlayName.addMouseListener( labelListener );
     * Returns the renderer
    public Component getTreeCellRendererComponent ( JTree tree, Object value,
        boolean selected, boolean expanded, boolean leaf, int row,
        boolean hasFocus )
      DefaultMutableTreeNode node = (DefaultMutableTreeNode) value;
      OverlayDescriptor data = (OverlayDescriptor) node.getUserObject();
      overlayName.setText( data.overlayName );
      visibleCheckBox.setSelected( data.visible );
      showLabelCheckBox.setSelected( data.label );
      if ( selected )
        setBackground( selBG );
        setForeground( selFG );
      else
        setBackground( txtBG );
        setForeground( txtFG );
      return this;
    // ------------------------------------------------- Cell Editor
    // Returns the editor
    public Component getTreeCellEditorComponent ( JTree tree, Object value,
        boolean isSelected, boolean expanded, boolean leaf, int row )
      return getTreeCellRendererComponent( tree, value, true, expanded, leaf, row, true );
    // Implement the CellEditor methods.
    public void cancelCellEditing ()
    // Stop editing only if the user entered a valid value.
    public boolean stopCellEditing ()
      requestFocusInWindow();
      return true;
    // This method is called when editing is completed.
    // It must return the new value to be stored in the cell.
    public Object getCellEditorValue ()
      return new OverlayDescriptor( overlayName.getText(), showLabelCheckBox.isSelected(), visibleCheckBox.isSelected() );
    // Start editing when the mouse button is clicked.
    public boolean isCellEditable ( EventObject eo )
      return true;
    public boolean shouldSelectCell ( EventObject eo )
      return true;
    // Add support for listeners.
    public void addCellEditorListener ( CellEditorListener cel )
      listeners.add( cel );
    public void removeCellEditorListener ( CellEditorListener cel )
      listeners.remove( cel );
    protected void fireEditingStopped ()
      if ( listeners.size() > 0 )
        ChangeEvent ce = new ChangeEvent( this );
        for ( CellEditorListener l : listeners )
          l.editingStopped( ce );
}subclass of BasicTreeUI:
   * Fix multiple-selection handling in BasicTreeUI which doesn't appear to work
   * when the tree has a custom editor.
protected static class MyTreeUI extends BasicTreeUI {
    protected boolean startEditing ( TreePath path, MouseEvent event )
       * BasicTreeUI startEditing(..) method doesn't handle multiple selection
       * well. This circumvents that for when Ctrl or Shift is held down by
       * first saving the current selection, and then restoring it after calling
       * super.startEditing(..).
      ArrayList<TreePath> selectedPaths = null;
      if ( tree.getSelectionCount() > 0 && event.isControlDown() )
        selectedPaths = new ArrayList<TreePath>( tree.getSelectionCount() + 1 );
        for ( TreePath p : tree.getSelectionPaths() )
          selectedPaths.add( p );
        if ( !tree.isPathSelected( path ) )
          selectedPaths.add( path );
        else
          selectedPaths.remove( path );
      else if ( tree.getSelectionCount() > 0 && event.isShiftDown() )
        int endRow = tree.getRowForPath( path );
        int startRow = tree.getAnchorSelectionPath() == null ? endRow : tree
            .getRowForPath( tree.getAnchorSelectionPath() );
        if ( startRow > endRow )
          int temp = endRow;
          endRow = startRow;
          startRow = temp;
        selectedPaths = new ArrayList<TreePath>( endRow - startRow + 1 );
        for ( int row = startRow; row <= endRow; row++ )
          selectedPaths.add( tree.getPathForRow( row ) );
      boolean val = super.startEditing( path, event );
      if ( selectedPaths != null )
        tree.setSelectionPaths( selectedPaths.toArray( new TreePath[0] ) );
      return val;
};

Apply multiple effects to multiple objects with single click box

I would like to click on a click box and have one object appear and another object disappear. I guess what I'd like to do is apply effects to multiple objects with a single click box. Is that possible?
Thank you.

Welcome to our community
Sure it can be done but you won't use effects to do it.
When you insert an object in Captivate, you have an option to enable or disable Visibility. You also have an option to name the object. So you would give the object a meaningful name and clear the Visibility option to "hide" it until needed.
Then you would create an Advanced Action that would hide some objects and show others.
After that, you would assign the Advanced Action to a Click Box or a Button or some other event.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

How to copy from one Version to Another version with single click

Hi Everone,
Users wants to copy from one version to another version with single click only. I.e Actuals to Planning etc.,
They don't want use standard COPY Data manager package to do this activity as this involves many steps.
Please let me know Is there any way to COPY with single click. Thanks in advance!!
Regards,
Viswanath

Hi Viswanath,
Use /CPMB/DEFAULT_FORMULAS
Then edit automatically created advanced script:
PROMPT(SELECTINPUT,,,,"%CATEGORY_DIM%,%CURRENCY_DIM%,%TIME_DIM%")
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SUSER,%USER%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPPSET,%APPSET%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPP,%APP%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SELECTION,%SELECTION%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,LOGICFILENAME,DEFAULT.LGF)
Remove bold lines and change the script name in line with your script name:
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SUSER,%USER%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPPSET,%APPSET%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPP,%APP%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,LOGICFILENAME,YOURLOGICNAME.LGF)
Vadim

Safari has frozen with a dialogue box open that simply makes a statement and then invites a single click on 'ok'. Unfortunately nothing happens except and audible error beep

Safari has frozen with a dialogue box open that simply makes a statement and then invites a single click on 'ok'. Unfortunately nothing happens except and audible error beep

MartinandJoanne wrote:
Safari has frozen with a dialogue box open that simply makes a statement and then invites a single click on 'ok'. Unfortunately nothing happens except and audible error beep
Are we to guess at the statement?

Sometimes a single click is unresponsive with JButton

Similar Messages

Maybe you are looking for