BAPI's are required supported to SD

Hi,
Could you tell me what are the BAPI's are available for Sales order, Purchase order as well as pricing.

Hi Pavan,
Use trxn <b>BAPI</b> and can navigate to know respective BAPIs for Sales Order and Purchase Order.
BAPI_SALESORDER_CREATEFROMDAT1
BAPI_SALESORDER_CREATEFROMDAT2
BAPI_SALESORDER_CREATEFROMDATA
BAPI_SALESDOCU_CREATEWITHDIA
BAPI_SALESORDER_CHANGE (For Pricing)
BAPI_PO_CREATE
BAPI_PO_CREATE1
BAPI_PO_CHANGE (For Pricing)
Regards,
Raj

Similar Messages

Is Distributed Transaction Coordinator services of the application role are required by SQL Server 2012 for clustering and support of SharePoint 2013.

All I want to know is if Distributed Transaction Coordinator services of the application role are required by SQL Server 2012 for clustering and support of SharePoint 2013.
I have been planning and deploying my companies first Windows Server 2012/SQL Server 2012 Always On cluster and Always On Availability Groups Multi-Subnet cluster and instances for SharePoint 2013, and I will be brutally honest, the documentation on either
the MSDN and TechNet leave alot to be desired. Continually finding links in the documentation will take me from a Windows 2012 reference to a page talking about Windows Server 2008 or R2, The differences of which there are so many when it comes to configurations,
settings, roles, services when working with SQL Server 2012. I have been confused, frustrated, screaming mad, with all the misdirection in this documentation. The documentation takes me windows 2008 R2 which is different than 2012!
Tired and trying to pick myself up off the floor!
Greg
Gman

In general, DTC is not required for SQL 2012. But, since you are asking specifically about SharePoint, it would be better to ask in a SharePoint forum. They would be more likely to know those situations where FTC might be needed by SharePoint.
.:|:.:|:. tim

What modifications are required to make a servlet support SSL data encrypti

Hi,
What modifications are required to make a servlet support SSL data encryption?
--kumar

Hi,
What modifications are required to make a servlet
support SSL data encryption?
--kumar No modifications are required in servlet. You have to setup servlet container.

What are the supported Platforms and system requirements for JSE?

What are the supported Platforms and system requirements for JSE?

Hi There,
The following are the system requirements & the support platforms for JSE :-
* Solaris 9 and 8 Operating Systems (SPARC Platform Edition)
o UltraSPARC II 450-MHz system with 512 MB of memory and 850 MB of disk space
o Recommended: UltraSPARC III 750-MHz system with 1 GB of memory and 1 GB of disk space, or higher.
* Solaris 9 Operating System (x86 Platform Edition)
o Pentium III 500-MHz system with 512 MB of memory and 850 MB of disk space
o Recommended: Pentium III 1-GHz system with 1 GB of memory and 1 GB of disk space, or higher
* Windows 2000 and Windows XP
o Pentium III 500-MHz system with 512 MB of memory and 850 MB of disk space
o Recommended: Pentium III 1-GHz system with 1 GB of memory and 1 GB of disk space, or higher

Problems with DHTML popup: Required DHTML functions are not supported in this browser.

When I try to open a Date calendar I receive this message:
Required DHTML functions are not supported in this browser.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

IGNORE this since I can not DELETE IT - Your browser does not support cookies, which are required for this web server to work in session authentication mode

Error - No cookies
Your browser does not support cookies, which are required for this web server to work in session authentication mode
This is a NOSCRIPT PROBLEM and NOT a Firefox problem.......
when disabled it works JUST FINE

Error - No cookies
Your browser does not support cookies, which are required for this web server to work in session authentication mode
This is a NOSCRIPT PROBLEM and NOT a Firefox problem.......
when disabled it works JUST FINE

Required support files are missing

dreamweaverを再インストールするために、ユーティリティのadobe Installerの中のファイルをクリックしたが、
「startup error」が出てしまい、アンインストールができない。
エラーメッセージは「required support files are missing」と出ております
該当URL：アンインストール手順（Macintosh 版 Creative Suite 4）
mac OSX 10.9.5
adobe creative suite 4 design premium

大変申し訳ないのですが、CS4 Cleanupを実行したところ、途中でセッションが切れてしまい、中途半端な状態で削除がされてしまいました。
2015-03-05 14:35:10.841 Adobe Creative Suite Cleanup[15742:387664] ***************End Session*****************
2015-03-05 14:41:48.718 Adobe Creative Suite Cleanup[514:8738] ***************Starting New Session*****************
2015-03-05 14:41:48.723 Adobe Creative Suite Cleanup[514:8738] Cleaner tool Version: 3.0.0.030
2015-03-05 14:41:48.724 Adobe Creative Suite Cleanup[514:8738] Mode=UI mode
2015-03-05 14:41:48.949 Adobe Creative Suite Cleanup[514:8738] No CS5 product was found installed
2015-03-05 14:41:48.949 Adobe Creative Suite Cleanup[514:8738] ========================================
2015-03-05 14:41:57.356 Adobe Creative Suite Cleanup[514:8738] ***************End Session*****************
再度Cleanupを行おうと思ったところ、該当の製品がないと出てしまいまして、完全な削除ができておりません。
この場合に方法などございますでしょうか。
なんどもお手数ですが、よろしくお願いいたします。

Authorizations for which transactions are required in BW?

Hi,
Can any ony please give some information regarding
Authorizations for which transactions are required in BW Production Support?
Regards,
Aryan

Hi Aryan,
Authorizations for the following transactions are required in BW
1. RSA1
2. SM37
3. ST22
4. ST04
5. SE38
6. SE37
7. SM12
8. RSKC
9. SM51
10. RSRV
11.RSPC
13.RSMON
The Process Chain Maintenance (transaction RSPC) is used to define, change and view process chains.
Upload Monitor (transaction RSMO or RSRQ (if the request is known)
The Workload Monitor (transaction ST03) shows important overall key performance indicators (KPIs) for the system performance
The OS Monitor (transaction ST06) gives you an overview on the current CPU, memory, I/O and network load on an application server instance.
The database monitor (transaction ST04) checks important performance indicators in the database, such as database size, database buffer quality and database indices.
The SQL trace (transaction ST05) records all activities on the database and enables you to check long runtimes on a DB table or several similar accesses to the same data.
The ABAP runtime analysis (transaction SE30)
The Cache Monitor (accessible with transaction RSRCACHE or from RSRT) shows among other things the cache size and the currently cached queries. The Export/Import Shared buffer determines the cache size; it should be at least 40MB.
****Assign Points If Helpful****
Regards,
Ravikanth

Since installing Lion I keep getting the error message 'there was a problem connecting to the server. URLs with the type 'file:" are not supported"' How can I fix this?

since installing Lion I keep getting the error message 'there was a problem connecting to the server. URLs with the type 'file:" are not supported"' How can I fix this?

A Davey1 wrote:
Not a nice answer!
Posting "Check the 'More like this'" area and not simply providing the answer is a great way to make these groups worthless.
You're ignoring context. On the old Apple Discussion Groups I never posted replies like that, instead giving people relatively detailed answers. The new Apple Support Communities made things worse by introducing certain inefficiencies. Then came Lion. The flood of messages that came with Lion required a painful choice for any of the people who had been helping here: (1) Give quality responses to a few questions and ignore the rest. (2) When applicable, give a brief answer such as the one that you found objectionable. (3) Give up all the other normal activities of life and spend full time trying to answer questions here.
People who needed help with Lion problems seemed to have trouble discovering existing message threads that described how to solve their problems. I never posted the suggestion of "Check the 'More like this' area" without verifying that the help that the poster needed could be found there. Even doing that, what I posted saved me time that I could use to help someone else.
The people helping here are all volunteers. None of them is being paid for the time they spend here. They all have a life outside of Apple Support Communities. It's arrogant of you to demand that people helping here spend more time than they already do.

What file/registry permissions are required to run MultiSim 7 as a regular user?

I want to be able to run MultiSim 7 as a regular user (since our students obviously do not have administrative permissions/rights).
I can't quite figure out what file and registry permissions are required to be able to do this (despite using Filemon and Regmon).

Hi,
If you are refering to the "failed to update registry" warning message, do this:
1. Click Start-->Run
2. Type "regedt32"
3. Locate HKEY_Classes_Root/Multisim.Document
4. On the menu, select Security-->Permission (win 2000), For XP select Edit-->Permission
5. Give full control for everyone
6. Repeat step 3-->5 for:
HKEY_Classes_Root/CLSID/{2D964073-9BC9-11D1-840B-006008AC6551}
Regards,
Tien Pham
EWB Support
Tien P.
National Instruments

JDeveloper Error: White spaces are required between publicId and systemId.

I'm using JDeveloper 10.1.3.1.0.
This error is occurring in a BPEL process project.
With one particular web service I have, adding a Partner Link to the BPEL generates the following compile error:
Error: White spaces are required between publicId and systemId.
I can add Partner links from other web services and the BPEL will compile fine. The main difference I can see is that this web service supports WS-Addressing.
I have found one other reference to a similar (but not exactly the same) problem elsewhere in these forums but the fix is not really applicable. All of the wsdl files pass the "Validate WSDL" operation, and I don't see anything wrong with them.
When the error occurs and I select "Go To Source" it points back to the first line of the bpel file.
Can anyone help me out on this?
This is the wsdl for the web service, wsademo.wsdl:
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="wsademo"
targetNamespace="http://localhost:11001/wsademo.wsdl"
xmlns:tns="http://localhost:11001/wsademo.wsdl"
xmlns:SOAP-ENV="http://www.w3.org/2003/05/soap-envelope"
xmlns:SOAP-ENC="http://www.w3.org/2003/05/soap-encoding"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing"
xmlns:ns="http://localhost:11001/wsademo.wsdl"
xmlns:SOAP="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:MIME="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:DIME="http://schemas.xmlsoap.org/ws/2002/04/dime/wsdl/"
xmlns:WSDL="http://schemas.xmlsoap.org/wsdl/"
xmlns="http://schemas.xmlsoap.org/wsdl/">
<types>
<schema targetNamespace="http://localhost:11001/wsademo.wsdl"
xmlns:SOAP-ENV="http://www.w3.org/2003/05/soap-envelope"
xmlns:SOAP-ENC="http://www.w3.org/2003/05/soap-encoding"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing"
xmlns:ns="http://localhost:11001/wsademo.wsdl"
xmlns="http://www.w3.org/2001/XMLSchema"
elementFormDefault="unqualified"
attributeFormDefault="unqualified">
<import namespace="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<import namespace="http://www.w3.org/2003/05/soap-encoding"/>

<element name="wsademoResult">
<complexType>
<sequence>
<element name="out" type="xsd:string" minOccurs="0" maxOccurs="1" nillable="true"/>
</sequence>
</complexType>
</element>

<element name="wsademo">
<complexType>
<sequence>
<element name="in" type="xsd:string" minOccurs="0" maxOccurs="1" nillable="true"/>
</sequence>
</complexType>
</element>

<element name="wsademoResult">
<complexType>
<sequence>
<element name="out" type="xsd:string" minOccurs="0" maxOccurs="1" nillable="true"/>
</sequence>
</complexType>
</element>
</schema>
</types>
<message name="wsademoResult">
<part name="parameters" element="ns:wsademoResult"/>
</message>
<message name="wsademo">
<part name="parameters" element="ns:wsademo"/>
</message>
<message name="wsademoResult">
<part name="parameters" element="ns:wsademoResult"/>
</message>
<message name="wsademoHeader">
<part name="MessageID" element="wsa:MessageID"/>
<part name="RelatesTo" element="wsa:RelatesTo"/>
<part name="From" element="wsa:From"/>
<part name="ReplyTo" element="wsa:ReplyTo"/>
<part name="FaultTo" element="wsa:FaultTo"/>
<part name="To" element="wsa:To"/>
<part name="Action" element="wsa:Action"/>
</message>
<portType name="wsademoPort">
<operation name="wsademoResult">
<documentation>accepts a string value from a relayed response</documentation>
<input message="tns:wsademoResult"/>
</operation>
<operation name="wsademo">
<documentation>echos a string value and relays the response to the wsa replyTo address (if present)</documentation>
<input message="tns:wsademo"/>
<output message="tns:wsademoResult"/>
</operation>
</portType>
<binding name="wsademo" type="tns:wsademoPort">
<SOAP:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="wsademoResult">
<SOAP:operation soapAction="urn:wsademo/wsademoPort/wsademoResult"/>
<input>
<SOAP:body parts="parameters" use="literal"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="Action"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="To"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="FaultTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="ReplyTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="From"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="RelatesTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="MessageID"/>
</input>
</operation>
<operation name="wsademo">
<SOAP:operation soapAction="urn:wsademo/wsademoPort/wsademo"/>
<input>
<SOAP:body parts="parameters" use="literal"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="Action"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="To"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="FaultTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="ReplyTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="From"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="RelatesTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="MessageID"/>
</input>
<output>
<SOAP:body parts="parameters" use="literal"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="Action"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="To"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="FaultTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="ReplyTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="From"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="RelatesTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="MessageID"/>
</output>
</operation>
</binding>
<service name="wsademo">
<documentation>demonstrates WS-Addressing capabilities</documentation>
<port name="wsademo" binding="tns:wsademo">
<SOAP:address location="http://localhost:11001"/>
</port>
</service>
</definitions>
This is the wsdl that is generated by JDeveloper that contains the PartnerLinks and refernce back to the original wsdl file, wsademoRef.wsdl:
<definitions
name="wsademo"
targetNamespace="http://localhost:11001/wsademo.wsdl"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://localhost:11001/wsademo.wsdl"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
>
<import namespace="http://localhost:11001/wsademo.wsdl" location="wsademo.wsdl"/>
<plnk:partnerLinkType name="wsademoPort_PL">
<plnk:role name="wsademoPort_Role">
<plnk:portType name="tns:wsademoPort"/>
</plnk:role>
</plnk:partnerLinkType>
</definitions>
And finally the is the BPEL, WSAtest3.bpel:
<?xml version="1.0" encoding="UTF-8"?>

<process name="WsaTest3" targetNamespace="http://xmlns.oracle.com/WsaTest3"
xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:ns1="http://localhost:11001/wsademo.wsdl"
xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:ns2="http://localhost:80/Service.wsdl"
xmlns:client="http://xmlns.oracle.com/WsaTest3"
xmlns:bpelx="http://schemas.oracle.com/bpel/extension/"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc">

<partnerLinks>

<partnerLink name="client" partnerLinkType="client:WsaTest3"
myRole="WsaTest3Provider"/>
<partnerLink name="wsademo" partnerLinkType="ns1:wsademoPort_PL"
myRole="wsademoPort_Role" partnerRole="wsademoPort_Role"/>
</partnerLinks>

<variables>

<variable name="inputVariable" messageType="client:WsaTest3RequestMessage"/>

<variable name="outputVariable"
messageType="client:WsaTest3ResponseMessage"/>
<variable name="Invoke_1_wsademo_InputVariable" messageType="ns1:wsademo"/>
<variable name="Invoke_1_wsademo_OutputVariable"
messageType="ns1:wsademoResult"/>
</variables>

<sequence name="main">

<receive name="receiveInput" partnerLink="client" portType="client:WsaTest3"
operation="process" variable="inputVariable" createInstance="yes"/>

<assign name="Assign_1">
<copy>
<from variable="inputVariable" part="payload"
query="/client:WsaTest3ProcessRequest/client:input"/>
<to variable="Invoke_1_wsademo_InputVariable" part="parameters"/>
</copy>
</assign>
<invoke name="Invoke_1" partnerLink="wsademo" portType="ns1:wsademoPort"
operation="wsademo" inputVariable="Invoke_1_wsademo_InputVariable"
outputVariable="Invoke_1_wsademo_OutputVariable"/>
<assign name="Assign_2">
<copy>
<from variable="Invoke_1_wsademo_OutputVariable" part="parameters"/>
<to variable="outputVariable" part="payload"
query="/client:WsaTest3ProcessResponse/client:result"/>
</copy>
</assign>
<reply name="replyOutput" partnerLink="client" portType="client:WsaTest3"
operation="process" variable="outputVariable"/>
</sequence>
</process>
-Wayne Stielau
Open Text Corporation
Irvine, CA

I have discovered two issues.
1. JDeveloper does not seem to like the SOAP 1.2 envelope and encoding namespaces. Is this a known limitation? Changed them to 1.1.
2. JDeveloper does not like the double definition of wsaDemoResult.
When these two items are changed, the bpel compiles clean. Now I've got to get the message header to populate correctly. There are no values assigned, only namespace definitions. This is the SOAP packet that is received at the web service.
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<env:Header>
<MessageID xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<From xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<RelatesTo xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<Action xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<ReplyTo xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<To xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<FaultTo xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
</env:Header>
<env:Body>
<wsademo xmlns="http://localhost:11001/wsademo.wsdl">
<in xmlns="">hello</in>
</wsademo>
</env:Body>
</env:Envelope>

Bapi's are non Dalog oriented

Hello,
Usually Bapi's are non Dalog oriented,but why do we have chckbox named " Dialog " in Bapi Explorer
Transaction.Whats the use of this Dialog checkbox ?
Please explain it clearly..
Thanks in Advance.

Hi,
Contrary to what many expect, BAPI can have a dialog just like other applications. A good example of one such BAPI is BAPI_MATERIAL_DISPLAY. When ever dialogs are required, we can use such a BAPI!!
Regards,
Nimish

Subitems for manual strategy are not supported

Hi Experts,
Need help from you,
While configuring material substitution reasons with inputs substititution strategy as A(Substitute products or display for selection) and in the outcome i am trying to use A (Substution Products are displayed as subitems), system throughing error message "subitems for manual strategy are not supported".
My requirement is like this - In sales order i enter material, system should pop up with substitutions and after selecting the substitute material, i would like to have the sub item for the original mateiral along with the substitute material.
I know it is supporting automatic substitution strategy, but i need for manual substitution strategy.
- Prem

Hi,
maintain Stragegy "A" and then u need to keep Outcome as " "( Blank:-Item will be replaced) :-
Becasue,Strategy Determines Alternate of material Ex:- for X Mat Repalce with Y. where as Outcome control :-
product selection should replace the original entry or whether it should be recorded as a subitem.Both will not be possible one at time.

Maven giving "annotations are not supported in -source 1.3" for @Entity

I m using maven for spring, hibernate with jpa . When i m running comman "mvn clean install" ,it is giving error in compilation of a bean class which is using jpa annotations.The error is :
annotations are not supported in -source 1.3
(use -source 5 or higher to enable annotations)
@Entity
Pom.xml is as below :
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>com.niit.core</groupId>
<artifactId>Spring3Example</artifactId>
<packaging>jar</packaging>
<version>1.0-SNAPSHOT</version>
<name>Spring3Example</name>
<url>http://maven.apache.org</url>
<properties>
<org.springframework-version>3.1.2.RELEASE</org.springframework-version>
</properties>
<repositories>
<repository>
<id>JBoss Repo</id>
<url>https://repository.jboss.org/nexus/content/repositories/thirdparty-releases</url>
</repository>
</repositories>
<build>
<plugins>
<plugin>
<artifactId>maven-war-plugin</artifactId>
<version>2.0</version>
</plugin>
</plugins>
</build>
<dependencies>
<dependency>
<groupId>org.springframework</groupId>
<artifactId>spring-context</artifactId>
<version>${org.springframework-version}</version>
</dependency>

<dependency>
<groupId>org.springframework</groupId>
<artifactId>spring-core</artifactId>
<version>${org.springframework-version}</version>
</dependency>
<dependency>
<groupId>junit</groupId>
<artifactId>junit</artifactId>
<version>3.8.1</version>
<scope>test</scope>
</dependency>
<dependency>
<groupId>javax</groupId>
<artifactId>javaee-api</artifactId>
<version>6.0</version>
<scope>provided</scope>
</dependency>
<dependency>
<groupId>org.hibernate</groupId>
<artifactId>hibernate-core</artifactId>
<version>3.6.10.Final</version>
</dependency>
<dependency>
<groupId>org.hibernate.java-persistence</groupId>
<artifactId>jpa-api</artifactId>
<version>2.0-cr-1</version>
</dependency>
<dependency>
<groupId>org.hibernate</groupId>
<artifactId>hibernate-entitymanager</artifactId>
<version>3.5.0-Beta-2</version>
</dependency>
<dependency>
<groupId>javax.servlet</groupId>
<artifactId>servlet-api</artifactId>
<version>2.5</version>
</dependency>
</dependencies>
</project>
And class is as below :
package com.niit.form;
import javax.persistence.Column;
import javax.persistence.Entity;
import javax.persistence.GeneratedValue;
import javax.persistence.Id;
import javax.persistence.Table;
@Entity
@Table(name="CONTACTS")
public class Contact {
@Id
@Column(name="ID")
@GeneratedValue
private Integer id;
@Column(name="FIRSTNAME")
private String firstname;
public String getFirstname() {
return firstname;
public void setFirstname(String firstname) {
this.firstname = firstname;
public void setLastname(String lastname) {
this.lastname = lastname;
public Integer getId() {
return id;
public void setId(Integer id) {
this.id = id;
}

java version is 1.6.0_24
There is no settings.xml in users/.m2
I think , maven is using default settings.xml which is in M2_HOME\conf which has everything commented as below:
<?xml version="1.0" encoding="UTF-8"?>


<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">




<pluginGroups>

</pluginGroups>

<proxies>

</proxies>

<servers>


</servers>

<mirrors>

</mirrors>

<profiles>


</profiles>

</settings>

BAPI or RFC Required to in ABAP webdynpro

Hi All,
I am new to the ABAP webdynpro. But i have experience in JAVA webdynpro. In JAVA WD , will access the back system functionality using RFC. But if comes to ABAP WD, is it required the RFC or BAPI?
If required why it is required? what is the advantage of using the BAPI or RFC in ABAP webdynpro? Because ABAP WD is running on the same system.
If not required ? what is the advantages of with out using BAPI's
Please let me know what are pros and cons for the using the BAPI or RFC in ABAP WD.
Regards
Vijay

Hi vijay,
Firstly welcome to our webdynpro learning world . :). As you said you are already aware of the wendynpro java . Almost all same functinality it follows as webdynpro abap, the thing which it differs is
for java to interact with the RFC or the Bapis u need to interact with the other engine but since u are working into the same area line webdynpro abap need not calll any other specific engine as the RFC or teh BAPI s reside in the same workspace . Simple!.
Hope you are aware of the MVC functionality which our webdynpro follows so these bapis and RFCs firstly they are reusable and the other importance is generally we run our webdynpro applications by embeding our applications into portal so for that sake we make our (rfc and BAPI s )are remote enabled.
such that our webdynpro applications run .
Hope it would help you .
Happy learning. Have a Good Day!
Regards,
Sana.

BAPI's are required supported to SD

Similar Messages

Maybe you are looking for