BAPI to create demands on MD04

Hello,
Can anyone direct me to a BAPI that will create the demands for a Goods Issue of a material to a subcontractor?  I need the demands to show up in MD04 and ME2O.
I plan to use the FM CS_BOM_EXPL_MAT_V2  to explode a subcontracting BOM and then use a BAPI to create the demands for a GI to the subcontractor.
Any ideas?
Thanks,
Matt

Thanks for the response.
In this case, I am trying to get a kanban that uses a scheduling agreement with subcontracting to work.
Standard SAP does not allow scheduling agreements and subcontracting to work together.  The other option is a PO with a reference to a contract and that creates too many POs.
So I am working on a mod that will allow scheduling agreements to work with subcontracting for our kanbans.
Does that make sense?
Thanks,
Matt

Similar Messages

  • Need to create a sales order that does not create demand

    Hi,
    We need to create a no cost sales order - that does not create demand
    In our current set-up when we try to create a no cost sales order with a material ( It Cat = Norm) we see demand being created in MD04
    What configuration settings will allow us a deliverable order - that does not create demand (no MRP run?)
    Thanks,
    SM

    Hello,
    For this set of requirement i think the best option would be to configure a New Sales Order Type and a new Schedule Line Category. In VOV6, While you are defining a new Schedule line category in the transaction flow make sure to switch off the three check box.
    Transfer of requirements / Begin assembly order from SD
    Availability check for sales
    Product allocation active
    Then when we are assigning this newly defined Schedule line Category to Item category, make sure to leave the field of MRP Type as blank in VOV5.
    Regards,
    Sarthak

  • Component number demand in MD04 missing

    A packaging number in a material bom has stopped generating demand in MD04.  It is still in the BOM and has all of the settings that other material’s packaging numbers have.  When a MD41 is ran for the material a summary of components is listed, and that packaging number is not calculated, or listed.  Why has this one particular packaging number stopped generating demand?

    Hi,
    If the master data has not been changed and you have deleted and recreated the BOM, then there is little else that can be causing the problem.
    Is there any difference in the stock levels of each material?
    Create a planning file entry for the component with MD20 and set the NETCH flag on (and the other flags too, to make sure that it will be included in the next MRP run)
    Also check the settings on the MRP run, make sure that the planning mode is a 2 or ideally a 3, so that the BOM for the main material will be re-exploded.
    Steve B

  • BAPI for create IR and GR

    Hi All,
    I would like to use the BAPI to create the IR and GR.
    But i don't know which BAPI is use for create the IR and GR . Could you mind give any information about this?
    Regards,
    Luke

    Hi Luke,
    The function module "BAPI_GOODSMVT_CREATE " would perform the task.  Please refer to the following link.
    http://www.sap-img.com/abap/bapi-goodsmvt-create-to-post-goods-movement.htm
    Regards.

  • BAPI to create Excise Invoice and Commercial Invoice

    Hi All,
    Can u tell me the BAPI for creating Excise and Commercial Invoice.
    Moderator message: please do some research before asking.
    [Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
    [Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
    Edited by: Thomas Zloch on Mar 2, 2011 5:56 PM

    Hi,
    You can make the appropriate setting in Customizing for Excise Duty, by choosing Basic Settings -> Maintain Excise Groups, and selecting Create EI (Create Excise Invoice Automatically)
    Also maintain the default excise and series group in the configuration.
    Logistics general>Tax on Goods Movement>India>Basic Settings>Maintain Excise groups. For your Excise group maintain the check Excise invoice during Billing.
    After maintaining the same also maintain the default values in Logistics general>Tax on Goods Movement>India>Business transactions>Outgoing Excise invoices-->Maintain Default Excise groups and Series groups.
    Regards,

  • BAPI to create Scheduling Agreement of VA31

    Dear gurus,
    I need to find the BAPI or Function Module to create Scheduling Agreement of VA31 from the uploaded data. I know that I can use BAPI_SALESORDER_CREATEFROMDAT2 to create the sales order of VA01. Can I use the same bapi to create the scheduling agreement of VA31? Both of the screens seems to look quite the same but their order types are different. Any suggestion on this?
    Thank you for your help. Have a nice day.
    Best Regards,
    Hedy

    Hi,
    FM
    BAPI_CUSTSCHEDULAGREE_CONFDELV
    Functionality
    You can use this method to make a delivery confirmation in the SD scheduling agreement
    Example
    1. Generating delivery for a scheduling agreement item.
    2. Changing a delivery item.
    3. Posting of goods issue for delivery.
    4. Deleting a delivery item or a delivery.
    Regards,
    Venkatesh

  • BAPI for creating scheduling agreement with reference to Contract agreement

    Hi All ,
    Can anyone please suggest if there is any BAPI for creating scheduling agreement with reference to the contract agreement number.
    Thanks for your help.
    Vadivukkarasi

    Hi,
       Check this BAPI <b>BAPI_AGREEMENT_MAINTAIN.</b>
    check these
    BAPI_CUSTSCHEDULAGREE_CONFDELV Customer Sched. Agreement: Confirmation of Delivery; Document Flow Upd
    BAPI_SALES_DEL_SCHEDULE_CREATE BAPI for creation of releases in scheduling agreements
    Regards

  • BAPI for Creating a PM order(iw34) with reference to a Notification

    Hi All,
    Could anyone help to find the BAPI for creating a PM order with reference to a notification Number.
    I will explain my requirement :
    I want to create a notification from an external Application where i got the BAPI BAPI_ALM_NOTIF_CREATE and keeping this created notification number as Referece or for this notification number  i need a create a PM order.Usually this process in done transaction IW34 in R/3.
    But with the BAPI BAPI_ALM_ORDER_MAINTAIN i can create a PM order but this BAPI doesn't have a input parameter "Notification number ".So i can't use this BAPI.
    Could any suggest for a BAPI where i can create a PM order with reference to a Notification Number.
    Regards,
    Sid

    Hi,
    I have tried with the FM CO_IH_ORDER_GENER_2 but when i executes it gives a error message
    "<i>Service/maintenance order type PM02 not completely maintained in plant
    Message no. IW216
    Diagnosis
    For the selected order type and plant, no check control is maintained in Plant Maintenance/Service in 'Availability Check for Materials, PRTs and Capacities'.
    Procedure
    A check control must be maintained for this combination of order type and plant</i>"".
    And even have a doubt what to enter in this input parameter "GEWRK_OBJTYP"  .
    Kindly help me to solve this issue.
    Regards,
    Sid

  • BAPI to create SNP planned order based on start date

    Hi,
    I am looking for a BAPI to create SNP planned order based on the order start date. There is BAPI BAPI_MOSRVAPS_CREATESNPORDER which can be used to create SNP planned order based on the end date but not based on the start date.
    Also would be great if some one can share how do they create SNP Planned orders using BAPI BAPI_MOSRVAPS_CREATESNPORDER in case if GR processing time is defined in the product master and workdays for GR to be respected according to the calendar.
    Regards,
    Venkat

    Hello Mr.Venkat,
    Hope you recognize me.
    Please check out the BAdi below.
    BAdi - APO_BAPI_BUS10503 (this is the BAdi for ManufactOrderAPS  BAPI which contains the SNPorder BAPI)
    Method - CHANGE_SAVEMULTIPLE2
    In this method parameter IT_ORDER_HEAD contains Order start date input option.
    For GR time please check this (not sure if it will help).
    Same BAdi/ same method
    Parameter IV_PLANNING_MODE_USAGE contains field PLANNING_MODE.
    Value 1 for PLANNING_MODE corresponds to "Observance of parameters from the product master".
    This may make it respect the GR time in product master
    Good luck with the above
    Regards,
    Ashok

  • Problem using BAPI to create Service Confirmation in CRM

    Good afternoon all.
    I have raised this is CRM forum too, just thought it best to ask the broader ABAP community the question too.
    We are encountering a problem using a BAPI to create a transaction in CRM, specifically:
    I am trying to create a Service Confirmation (BUS2000117) in a CRM system using the BAPI BAPI_BUSPROCESSND_CREATEMULTI.
    The BAPI succeeds in creating the header of the transaction, but I cannot make the BAPI create any other data in the transaction such as partners or items.
    Just want to be sure that I am not being foolish...has anyone succeeded in using this BAPI to create an error-free Service Confirmation?
    Regards
    Nick

    I am going to pop this thread into General ABAP forum too.
    Nick

  • Need     RFC/BAPI    to create Delivery Order  with respect to  Sales Order

    Hi Gurus ,I'm   new  to  AB AP  Language   to be  working  in company
    so  can anyone  tel  me   FM/BAPI   to create  Delivery  order  with respect to  sales order(va01,vl01n)
    Any  sugg.. will appreciate  u.........
    Thanks in Advance...........

    Hi,
        Try this BAPI
    BAPI_SALESORDER_CONFIRMDELVRY
    Regards
    Bala Krishna

  • Need a Bapi to Create a purchase order

    Hi experts,
    Is there a Bapi, to create a 'Purchase Order' from an existing Purchasing document no. marked for deletion.
    Thanks in advance ,
    Hrashit Rungta

    Hi Experts,
    I have used BAPI_PO_CREATE1 to create a purchase order .
    I have successfully created a purchase order when i use this BAPI directly through SE37 ,
    supplying the required inputs.
    But now i am calling  this BAPI inside a program,
    Supplying the same inputs as earlier.
    Buit i am not able to generate a PO.
    I am getting the messages in the Return Table as :|Please enter items first
                                                                                    No instance of object type PurchaseOrder has been created. External referen
                                                                                    Document contains no items
    Can someone suggest What input am i missing ?
    Thanks in advance,
    Harshit Rungta

  • Bapi to  create customer Master

    Dear all,
    As far i know there is no standard bapi to create a customer.  There i s standard fm used her is SD_CUSTOMER_MAINTAIN_ALL. I tried to create customer master using this and making the function module as remote enabled. i tried to created a  zbapi and use this fm inside of this. Please tell me if any idea on this.If any body knows   please help me in this.
    Regards,
    Madhu.

    Dear Alain
    Once again thanks for your reply. I passed customer no to extract data of a customer . But it is not extracting any data .
    I am thinking to fill all the fields of the table by seeing hoe it is extracting the data . can you give me some idea on this .
    DATA: ls_i_main   TYPE cmds_ei_main,
            ls_e_main   TYPE cmds_ei_main,
            lt_custs    TYPE cmds_ei_extern_t,
            ls_cust     TYPE cmds_ei_extern,
            ls_head     TYPE cmds_ei_header,
            ls_instance TYPE cmds_ei_instance.
      CONSTANTS: lc_obj_task TYPE cmd_ei_object_task VALUE 'M'.
      ls_instance-kunnr = '0000100001'.
      ls_head-object_instance = ls_instance.
      ls_head-object_task = lc_obj_task.
      ls_cust-header = ls_head.
      APPEND ls_cust TO lt_custs.
      ls_e_main-customers = lt_custs.
      CALL METHOD cmd_ei_api_extract=>get_data
        EXPORTING
          is_master_data = ls_e_main
        IMPORTING
          es_master_data = ls_i_main.
          "es_error       = pe_error.
    Regards,
    madhu.
    Edited by: madhurao123 on Mar 31, 2010 1:17 PM

  • FM/BAPI to create Transfer Order(TO) with reference to TR or Material Doc.

    Hi,
    I am in need of Function module or BAPI to Create Transfer Order(TO) with reference to Transfer Requirement(TR) or Material Document.

    Hi,
    Please try any of the below,
    1.Look at function group L03B (Transfer order processing)
    2.Use L_TO_CREATE_TR
    3.BAPI_GOODSMVT_CREATE set:
    GOODSMVT_ITEM-STGE_TYPE_PC = destination storage type or GOODSMVT_ITEM-STGE_TYPE_ST = destination storage type
    4.Look at fm L_TB_VERAENDERN. This isn't RFC, but you might copy fm into ZL_TB_VERAENDERN and set RFC on.
    Hope this helps.
    Thanks,
    Harini

  • FM/BAPI for creating the credit memo request for Vendor

    Hi Experts,
        I need an RFC/BAPI,  for creating the credit memo request for Vendor.
    Thanks in Advance,
    Kiruba.R

    Hi,
    Use this BAPI 'BAPI_DRMCREDITMEMOREQ_CREATE' - Credit Memo Request Creation
    Regards,
    Jyothi CH.

Maybe you are looking for

  • Rotate Photos Before Or After Importing To PC? Videos Won't Play On PC!!!

    Hello, I have an iPhone 5, before that a 3GS, and I've had NOTHING BUT FRUSTRATION with my photos & videos. Well I'll get to my other complaints below, but for now; is it best to rotate the photos before I import to pc? If not do I correct the rotati

  • JavaScript in WD

    Hi everyone, I am trying to get JavaScript running with my WD application. In the interface view, I created an Outbound plug called Exit. I added that interface view to my Main view. This is how I call the outbound plug :    wdThis.wdGetMyAppInterfac

  • Exec command in App Engine Peoplecode stopped working in PT8.49.10 ??

    We run an a few app engine jobs that use the Exec command in peoplecode to call a bat file which moves a file from one directory to another (a backup directory). It had been working fine but since we upgraded to PT8.49.10, from PT8.47 the job abends

  • Reinstall of CS5.5 student edition

    I have the student/teacher edition of CS5.5 and need to switch it to my Macbook pro with no disk drive. How do I do this?

  • User switching freezes briefly on cube animation

    Hi there. My iMac has recently started freezing for a few seconds when switching users. The 3-d cube effect gets half way between users and then pauses for 3-4 seconds before snapping onto the correct user desktop. Everything else works fine. I have