BAPI- To Pick DEpendent Demand in APO

Hi All,
I am working in APO-ABAP.I Am Using a Bapi to Get The Dependent demand for a Product.Bapi is BAPI_MOSRVAPS_GETLIST2.But this is not picking the same for ATPCAT-AU,AV,AX,EL,AY,AZ.Does anyone know any other BAPI to pick the same.Urgent
regards
Ahasan

Dear Ashok
Your requirement can be met using DP BOM. I am not sure about parent child CVC's , but DP - BOM should work.
You need to first create and activate PPM/ PDS for DP with usage D (BOM Demand Planning).
Assign it to model and create a planning object structure with DP BOM relevant.
Create the master and CVC based on MPOS
Create a PA with 2 different KF( one for finished product, another for dependent BOM). Initilize the PA and version.
Config the forecast settings for PA.
Pl see through the below link
[http://help.sap.com/saphelp_scm50/helpdata/en/e8/d47139f5a04c61e10000000a114084/frameset.htm]
Rewards points if it helps
Regards
Nav

Similar Messages

Dependent Demand in APO

Hi ,
I want to extract the dependent demand for a particular Product for a particular time interval,How to go about it I am working in APO-Abap.
Suppose there is a parent product P .In making of this
suppose child item C1,C2 ,C3 are used.
Reagards
Ahasan

Hi Joshi,
For efficient functioning between two systems and to getter best optimised solution,
the important pre-requisite is that both systems are in sync in terms of data.
CIF will just act as a mirror image between two systems transferring data.
APO will purely plan based on the stock availability in APO at that point of time when
planning run is taken place. It will not take into account of mismatches, product
nonavailability etc.,
If stock is mismatching, inventory system should be adjusted through proper
channel for correct entries of raw material stocks in system. After correction done
in R/3, CCR has to be run to match the stocks between both systems.
Please confirm your query is resolved
Regards
R. Senthil Mareeswaran.

How to get BOM component dependant demand whitout having BOM header in APO?

Hello,
I would like to know if it is possible to get BOM component dependant demand in APO without having BOM header in APO.
If someone already did that, please thanks to share your experience.
Thanks a lot and best regards.
M.Niang

Hi Niang,
There is an functionality in APO - DP module called "Forecasting with Bills of Material". You need create DP-BOM (PDS/PPM) from R/3.
Please refer the SAP help link for details.
http://help.sap.com/saphelp_scm50/helpdata/en/8f/9d6937089c2556e10000009b38f889/frameset.htm
Hope this is what you are looking for.
Regards,
Nawanit

DEPENDENT DEMAND OF RM IN APO

Hi,
if the dependent demand of raw material is 10 out of which 5 is in stock which is counted and rest is used for production but avaliable physically and not in stock?
and PGI is done for F.G , hence GR is done
please guide how APO and r/3 will react for this situation.

Hi Joshi,
For efficient functioning between two systems and to getter best optimised solution,
the important pre-requisite is that both systems are in sync in terms of data.
CIF will just act as a mirror image between two systems transferring data.
APO will purely plan based on the stock availability in APO at that point of time when
planning run is taken place. It will not take into account of mismatches, product
nonavailability etc.,
If stock is mismatching, inventory system should be adjusted through proper
channel for correct entries of raw material stocks in system. After correction done
in R/3, CCR has to be run to match the stocks between both systems.
Please confirm your query is resolved
Regards
R. Senthil Mareeswaran.

Bapi for sfg dependent dem,snp planned order qty, and ppds planned orde qty

Hi Gurus,
I am not much familiar with APO, so please help me,
Input details:
Field                         Value
Planning Version     000
Source Location *     1001     Single/Multi Value
Product *                          1000061     Single/Multi Value
Production Planner *     PRC     Single/Multi Value
Start Date *
End Date *
o/p:
Source Location     Date     Semi-Finished Material     Material Description     SFG Dependent Demand     SNP Planned Orders qty     PPDS Planned order Qty     Total SFG Variance due to Lot size     Total SFG Variance reference to dependent demand
1001     15-Jul-10     1000041PP     PRIMARY FF MILK 3% FAT     340     412     420     8     80
1001     15-Jul-10     1000041PP     PRIMARY FF MILK 3% FAT
1001     15-Jul-10     1000041PP     PRIMARY FF MILK 3% FAT
Is there any bapi to fetch the data as shown in o/p.
Thanks

Hi Phani,
Tryout the below BAPIs
IF10503 (object)
BUS10503
Regards
R. Senthil Mareeswaran.

BAPI_MOSRVAPS_SAVEMULTI3 creating unwanted Dependent Demand

We are using the BAPI function BAPI_MOSRVAPS_SAVEMULTI3
to create Production Orders to integrate WIP from a
legacy system. The presence of PDS for the product on which the production order is created, makes the PDS assignment to the production order. But, it is also creating a depenedent demand for the component in PDS, which inturn pegs to the supply on the component. We dont want the dependent demand to be created and peg to the supply, as the supply is already reduced in the external system.
We tried using PLANNING_MODE_USAGE parameter, but was not able to stop the creation of dependent demand.
Any way around this?

Hi,
Do you need the PDS in the planning system (APO) at all in case you don't want to see the dependant demand. The BAPI
BAPI_MOSRVAPS_SAVEMULTI3 documentation says:
For you to be able to create an order, a valid source of supply must exist for in-house production. This can be a production process model (PPM) of the type PP/DS or a production data structure (PDS). The source of supply is then used to generate the order. The order structure (components, operations, durations, capacity requirements, and so on) is determined based on the explosion. If a valid source of supply does not exist, a 'dummy' activity is generated and the order is created without structure and with only a main component.
We create production orders with dummy activities and only the output component using the BAPI without having the PPMs at the supply plant.
Regards
Vinod
NB: Also try 'Deactivate Dynamic Pegging' option in the product-supply location master data in the 'Demands' tab to ensure the dependant demand does not peg to available supplies of the component.

Integration (CIF) of dependend demands to APO without planned orders?

Hi,
is there any way we can integrate dependent demands for the components generated by planned and/or process orders without integrating the final products and planned / process orders?
The reason is that we are forecasting on component level only in APO and want to consume the dependent demand with the forecast in APO. But we don't want to integrate all the final products with planned and process orders, but only the components.
We would prefer a standard solution with CIF, but other solutions are fine as well.
Thanks for you help,
Johannes

Hi Johannes,
If you are using DP and want to send the forecast to R/3, it has to be a manual transfer to R/3 by using a transfer profile but not through CIF. You ofcourse need to CIF over the Product and Location.
Your scenario is quite common. We forecast at the assembly level and break it down to component level. You can either use DP BOM or two different planning areas or books as per your design needs. We transfer the component level forecast to R/3. In your transfer profile, you can specify the transfer to be at the component and Location level. Remember that you need to have the components (materials) and locations to be CIFed over to APO before the transfer or it fails.

Is there a BAPI to create Distribution demand for BOM purchase order?

I have a scenario wherein Material# in ECC differs from that in APO. So when a BOM purchase order comes in the inbound CIF queue to APO, I am trying to create dependent demands manually reading the subsequent materials from ECC and mapping with APO data

Please do not open a new thread with the same question:
Re: Is there any FM to create manually Subsequent demands for BOM header product?
Kind Regards,
Mariano

Dependent demand flow from SCM to ECC

Hi ,
Can any one explain, how the scm dependent demand can flow form scm to ECC.
scenerio-
I have 5 level of BOM , i need to plan up to 3 level in SCM and other needs to plan MRP in ECC.
Is it possible to transfer the dependent demand of 4rth level in ECC form SCM and run the MRP?
BOM are PDS explosion not RPM matrix.
Regards
Lav Mishra

Yes it is very much possible. MRP type should be X0 for material planned in APO and PD for not planned in APO.
X0- Means without MRP with BOM explosion so if you are transfering publishing planning results of APO planned material in ECC it will explode bom to plan ECC planned product in MRP.
Regards,
Santosh

Dependent Demand Distribution

Dear PPDS experts,
I am facing problem with distribution key . I have updated the Distribution key GLEI (Equal distribution) in Production version and the same has been updated in the BOM component. When I run product Heuristics in the PPDS system is creating one planned order in APO and Respective dependent demand. When that Planned order moved to ECC system, because of the Distribution key it is splitting the order quantity in the planned order duration equally, but it is not splitting the dependent demand of the Component.
I would like to know is there any prerequisites/ settings for the component to the dependent demand split. Your suggestions are highly appreciated.
Regards
Prabhakar Reddy

Hi Tiago,
Thanks a lot for your reply ... I tried this but for one componet dependent requirements are not distributed , but it is working fine with the header material . I will check further and update you ..
Regards
Prabhakar

Planning Dependent Demand with Phantom Strategy (59)

Hi
We would like to maintain forecasts at a Phantom material level and consume this forecast based on dependent demand (Planning Strategy 59 in ECC and an equivalent custom strategy in APO). This works in ECC MRP, but does not appear to work in APO CTM.
For example - Phantom Material P1 has a forecast. MRP and CTM behave the same, exploding this demand and planning for components. Now, a Sales Order comes in for A1 which is a parent of P1. MRP creates planned order for A1 and dependent demand for P1 which is set to consume forecast (based on the planning strategy 59). CTM also creates a planned order for A1and directly creates dependent demand for components of P1 but does not create dependent demand for P1 itself. Due to this, there is no forecast consumption of P1 leading to doubling of demand.
Any suggestions how to get Dependent Demand to be created for Phantom materials (so that CTM behaves similar to strategy 59 in ECC MRP) ?
Thanks
Rishi Menon

Hello Rishi,
Hope you are doing well.
Have you check the atp check mode. What value are you maintaining on check mode? What requirement type and requirement class are configured in ECC? There should be a class in ECC for Phentom Assembly and see if that is configured.
Hope this helps.
regards,
Najam

Dependent Demand Quantity is to high

Hi All,
This proble is SNP PDS related.
We have an issue on a product in that we have Finished Product which has a component. The Finished product to component ratio is clearly 1:4 (one finished product requires 4 of a certain component). However when we look at the dependent demands it is calculating them way to high in fact 1:8.7. So for the dependent demand its calculating we need 8.7 components for 1 finished product.
Does anyone have any idea what could be causing this?
Edited by: Pedley Mark on Nov 5, 2010 4:31 PM

Hi Sandeep,
Thank you for taking the time to help me with this issue.
I tried this on Friday and made these steps:
1) Use Interactive Supply Network Planning to copy to an external Excel file the production plans
2) Deleted the current plans in Interactive Supply Network Planning
3) Deleted the PDS in APO
4) Used Curto_Create to resend the PDS into APO
5) Opened up the Excel file and pasted the production plans back into Interactive Supply Network Planning
6) Process complete
At the end of this process, it still had the same problem unfortunatly.
Mark

Dependent demand requirements distributed in days

Dear experts,
Planned Orders created by the PPDS planning are usually between 2 to 4 days long, normally longer than one day. For some components we would need to see the requirements distributed proportionally in days instead of receiving the total depend demand quantity just before the beginning of the order. Reason for that is because suppliers are geographically very close so these components are ordered in daily basis and also, these components are actually being continuously issued to the mixing tank.
P.e:
Planned Order = 2000 PC --> Availab.Date = 4th July 12:00 am (starts 2nd July 12:00)
Component Requirements = 2000 PC -- total quantity required at the beginning of the order --> 2nd July 12:00
The business requirement is to have the requirements distributed proportionally by days:
2nd July --> 500 PC (Order is half of the half)
3rd July --> 1000 PC (Order runs the whole day)
4th July --> 500 PC (Order runs half a day)
I have tested with the Distribution Key assigned into the Production Version and also to the components. I have tried distribution with both distribution function: equal distribution and equal portions (alternatives dispatch at the start and end date do not work for my requirement), and then also the distribution type according to discrete points. Nevertheless I only get continual consumption which is not bad but with regard to the components dependent demand dates it is not what I need, the entire quantity is at the start of the operation to which components are assigned.
Any experience with this kind of requirement?
Thanks for your advice
Regards
Carlos
Edited by: carlos tur ferrer on Jun 16, 2010 8:12 AM

Hi Santosh,
Thanks for the answer. I have been using distribution key GLEI and as you mentioned, I got 3 lines in the Stock/Req List for the finish good (1000 PCs per day) in R/3 and therefore I got 3 dependent requirements in R/3. However, in APO I get only a planned order, 3 days lenght, so there is only one dependent demand for the component which requirement date is just before the beginning of the planned order. Then, material planners see the total demand for the order in one day even though the order takes 3 days and the total quantity is not needed at the beginning.
This is have I did:
-GLEI assigned to the component and to the Production Version
-Transfer the PDS
-I have the C for Continual Consumption assigned to the finish article and also for the components the PDS.
-I ran Planning of Standard Lots considering Continous I/O (however in R/3 I get the 3 lineas even creating the order manually or with the normal planning with standard lots.
In APO, I dont see any distribution of the quantity in the planned order,and neither in the dependent demand. I get a 3000 PC planned with availability day one day (one line) and the same for the dependent demand, one line. What I can see on the DSPB, chart product stock, is that the component is being required continuously and the planned order quantity is growing also gradually.
Am I missing something? It must be possible in APO also!
Thanks again
Carlos

Dependent Demand Planning of commponents

Hi
Following is the BOM structure -
F (Finished Good) -
> S1 (1st Intermediate) -
> S2 (2st Intermediate) -
> R (Raw Material)
I am trying to plan the finished good (F) in an external system (like say xLPO / ECC) and transfer the dependent demand of the S1 thus created to APO and plan the balance materials S1, S2 and R in APO. Can this be done. I have tried it but it does not seem to work.
Dependent demand of S1 is net getting transferred.
Regards
Deepak Joshi

How have you tried to plan for S1 in APO? Moreover standard APO design says F to be planned in APO. If F is planned in APO then S1 / S2 and R are NOT to be planned in APO as you plan for Header product (and the important components) in APO not the other way round.
Having said that you can get demand of S1 from the external system (not ECC) to APO BW and load that data in Demand keyfigure. If you are using Planning with BOM (DP-BOM functionality) then assig this keyfigure suitably to the dependent demand keyfigure.
Otherwise this demand of S1 when released to SNP/PPDS should explode to S2 dependent requirements based on the SNP or PPDS PDS.
Hope this helps,
somnath

Background job not automatically poopulating Dependant Demand

Hi Users,
We've recently set up a POS & PA using the DP-BOM selection and characteristics, manually created PPM's and generated CVC's using the BOMS. All of this is set up fine in our SCM 7.0.
The background job has created the forecasts for the ouptput products but NOT the input product.
Now if I call up the parent material, and then choose to show the input products the dependant demand is generated. If I now return to the material with the dependant demand, it now shows the demand from the parent.
Or, if the forecast is genereated interactively, then the dependant demand is poopulated.
Is there an automated method to populate the dependant demand when using background jobs? I would like to think that we don't have to query every sales BOM parent in DP and drill into the input products to load the dependant demand?
Please let me know if there is an easier way to do this as part of the background processing.
Thanks
Edited by: Paul_111 on Mar 31, 2011 4:20 PM

Hi Andand,
Thanks for your reply and sorry if my post is confusing.
As far as the PPM with imputs A & B, output C - I have this relationship working and calcuclating demand in DP no problems.
If I now add a new PPM combination inpput X, Y and output Z. Create the BOM CVC and TSO so its all set to go. Add to selection profiles and background jobs.
Now, if I run the background job to create the forecast and this runs successfully. Now I check my products.
Z has the forecast generated, X & Z have no dependant demand showing.
The only way I've found that pushes the demand to X & Z is:
- open product Z in demand planning and then choose the option to show input products from the header
OR - from demand planning, select the univariate forecast to run interactively.
My issue:
The background job (if run alone) does not push the forecast on Z to X & Y.
And if I show the input products or create forecast (as bove) the dependat demand is shown on X & Y.
This is going to be a slow process if we have to do this everytime we run the backgound job.
What am I missing when running the background job?

BAPI- To Pick DEpendent Demand in APO

Similar Messages

Maybe you are looking for