BAPI to update EIKP (Foreign Trade: Export/Import Header Data) data
Hello,
Is there any BAPI to update EIKP (Foreign Trade: Export/Import Header Data) table fields.
Thank you.
Best Regards,
Sreenivasa Chary Bathoju.
Dear Sreeninvas,
You can you BAPI_PO_CHANGE to change EIKP data. and all purchase order related data.
Thank you.
Best Regards,
Sasidhar Reddy Matli.
Similar Messages
-
BAPI to update EIKP (Foreign Trade: Export/Import Header Data)
Hello,
Is there any BAPI to update EIKP (Foreign Trade: Export/Import Header Data) table fields.
Thank you.
Best Regards,
Sreenivas.Hi Sreenivas
Try the FM EXPIMP_POSTING
Pushpraj -
Transfer Foreign Trade Export Import values in Purchase Order
Hello SRM brothers and sisters,
I have a question regarding the transfer of the Import/Export data (Foreign Trade) in the PO from SRM to ECC in the Classic Extended Scenario.
Basically, in the SRM BBP_ECS_PO_OUT_BADI -> BBP_B46B_PO_OUTBOUND method where we map all the values, I try to fill in the CT_BAPI_POEXPIMPITEM table with the item's Import/Export values.
The way this is done is:
if nothing exists in this CT_BAPI_POEXPIMPITEM table for the PO item, add an empty line and assign the following fields ( PO_ITEM, EXPORT_IMPORT_PROCEDURE, COUNTRYORI and COMM_CODE).
This is then sent to ECC via the RFC BBP_PO_INBOUND function module - and inside I know that it assigns the X-structure of Export/Import Item. It then calls the BAPI_PO_CREATE / BAPI_PO_CHANGE and in the debugger the values seem to be correct.
This all seems to be very nice, however when I take a look at the PO in ME23n, the values of the Import/Export data are not there! In table EIPO there is also nothing... As for error messages, nothing comes up either.
So, has this happened to anyone? Am I doing something wrong? Is there an extra step I should do (ie, fill another structure/table/field)?
Cheers,
AdiHi Kishor,
Thanks for your reply.I need to some more inputs if you can...
As you mention :-You need to enter the special UOM according to the specifications in the index of goods or foreign trade statistics: can you give a example to get more clarification.and how Qtys. are converted to this unit for the export declaration.
You mentionwd : (FOr each item, you have to enter the amount of the unit of measure determined
in the index of goods. Eg: number of units) -can u explain with example. what is index of Goods.
Thanks in adavance.
Thank you.
Regards
Amar -
Foreign trade:export and foreign trade:import
hi
i just want to know if we can maintain two different country of origin for foreign trade:export and foreign trade:import views in material master record.
Ex
scenario:- if i am importing a material from india and export the same to china.
Edited by: RajKiran Mohanty on Aug 20, 2008 1:44 PM
Edited by: RajKiran Mohanty on Aug 20, 2008 1:44 PMthe material that you import from india to export to China will not change its origin during this transition.
It the origin is India, it is still India even you export it from Singapur to China.
If you import this material from several sources and each has a different country of origin, then you can manage this only with batches, as you can maintain the CoO in the batch. -
Foreign trade:export and foreign trade:export
hi
i just want to know if we can maintain two different country of origin for foreign trade:export and foreign trade:export views in material master record.
Ex
scenario:- if i am importing a material from india and export the same to china.Hi Mohanty,
we cannot maintain two different country of origin for foreign trade:export and foreign trade:export views in material master record.
As the same good is been traded, but the effect of taxation and the business quota system (for example apparal, indid has a quota to trade 10% ), similarly the rate of taxation differ by the amount of value addition done in the country.
As part of obeying the business process we cannot maintain two different country .
With regards,
Lakshmi Narayana -
Foreign trade:export and foreign trade:export views
hi
i just want to know if we can maintain two different country of origin for foreign trade:export and foreign trade:export views in material master record.
Ex
scenario:- if i am importing a material from india and export the same to china.Using your example: India is the country of origin and China the country of destination - you don't need 2 countries of origin.
Country of Origin = Country where the material comes from -
Foreign Trade Export Procedures
Hi,
we are planning to implement the foreign trade export for Algeria.
Pl let me the procedures for export trade and also the best practices used for this.
Regards
RaviDear Ravi
For general export configuration, please make a search in the forum and specific to Algeria, first you have to identify what are all the statutory and other requirements prevailing over there and accordingly, you need to configure.
thanks
G. Lakshmipathi -
MM03- Legal Control Tab (Foreign Trade export screen )
Dear All,
I need to Disable ' Legal control' tab in Foreign Trade export screen in MM03,
Could you please give Configuration Path ??
Many Thanks!!
Best Regard!!!
SnehaHi,
You can do it in OMSR...but you have to individually disable the fields.
OMSR> select MARC-PRENC>click on the arrow in extreme right side>field references are shown>here you can hide, display make required entry or optional entry.
In case of doubts please revert..
Regards
Arya -
MM03- Legal Control (Foreign Trade export screen)
Dear All,
I need to Disable ' Legal control' tab in Foreign Trade export screen in MM03,
Could you please give Configuration Path ??
Many Thanks!!
Best Regard!!!
SnehaHi Sneha,
If you want to remove the legal control fields, you have to remove teh dynpro SAPLMGD1 2202 from the screen sequence .
You can do it in spro - Logistics General - Material Master - Configuring the Material Master - Define Structure of Data Screens for Each Screen Sequence ... (better if you do it for a screen seunce not standard).
Regards,
Mauro -
Control Code in Material Master Foreign Trade Export view
Hi All,
In material master Foreign Trade Export view we have a field Control Code (MARC - STEUC) i would like to know where do we configure these control codes in SPRO?
I need to know the path to configure them
Regard s
Pavanspro@Logistics - General@Material Master@Material IDs@Maintain PKWiUs
Regards,
Indranil -
Export / Import of Apex Data
Hello,
We are planning to move our Oracle databases from Windows Servers to Linux ones. In a test lab, we have successfully exported all data from an Oracle DB instance on Windows and imported that data on an Oracle DB instance on Linux (with the old export/import Oracle tool)
But in fact...it was all data except Apex data. The complete Apex environment is available on our new Linux server but no trace of all our workspaces and applications. The only available workspace is Internal.
We do not want to export / import all workspaces, applications, images and files one by one (by hand on the Apex environment).
- Is there a particular method to follow to include the Apex data in the export / import process ?
OR
- Is there a trick or a utility program that can automate the export / import of Apex data ?
Thank you for your help.
- PatricePatrice,
There is an Apex utility (it's called ApexExport) that can be setup to run workspace, application and page exports. It's a Java based utility and sometimes can be a little maddening to get configured to run but it will do the job once you get it configured. The utility will be on the database machine in the Apex installation directory. There is pretty good documentation available from Oracle but John Scott blogged about it here http://jes.blogs.shellprompt.net/2006/12/12/backing-up-your-applications/ as well.
Earl -
Foreign Trade - Export License Number for SED and SLI
We are not using full blown foreign trade. I just recently set up ECCN codes to be used on the above forms for exporting (we have home grown SAPScripts). Now I am being asked to have a way to store the Export License Numbers by material (it is item 22 on the SED). Any ideas?
thanks Alex Zheng for your answer but i did not get you
when i define a license type in VE51 -> no material number attribute exists
please clarify
thanks in advance -
Using export/import to migrate data from 8i to 9i
We are trying to migrate all data from 8i database to 9i database. We plan to migrate the data using export/import utility so that we can have the current 8i database intact. And also the 8i and 9i database will reside on the same machine. Our 8i database size is around 300GB.
We plan to follow below steps :
Export data from 8i
Install 9i
Create tablespaces
Create schema and tables
create user (user used for exporting data)
Import data in 9i
Please let me know if below par file is correct for the export :
BUFFER=560000
COMPRESS=y
CONSISTENT=y
CONSTRAINTS=y
DIRECT=y
FEEDBACK=1000
FILE=dat1.dmp, dat2.dmp, dat3.dmp (more filenames here)
FILESIZE=2048GB
FULL=y
GRANTS=y
INDEXES=y
LOG=export.log
OBJECT_CONSISTENT=y
PARFILE=exp.par
ROWS=y
STATISTICS=ESTIMATE
TRIGGERS=y
TTS_FULL_CHECK=TRUE
Thanks,
Vinod BhansaliI recommend you to change some parameters and remove
others:
BUFFER=560000
COMPRESS=y -- This will increase better storage
structure ( It is good )
CONSISTENT=y
CONSTRAINTS=y
DIRECT=n -- if you set that parameter in yes you
can have problems with some objects
FEEDBACK=1000
FILE=dat1.dmp, dat2.dmp, dat3.dmp (more filenames here)
FILESIZE=2048GB
FULL=y
GRANTS=y -- this value is the default ( It is
not necesary )
INDEXES=y
LOG=export.log
OBJECT_CONSISTENT=y -- ( start the database in restrict
mode and do not set this param )
PARFILE=exp.par
ROWS=y
STATISTICS=ESTIMATE -- this value is the default ( It is
not necesary )
TRIGGERS=y -- this value is the default ( It is
not necesary )
TTS_FULL_CHECK=TRUE
you can see what parameters are not needed if you apply
this command:
[oracle@ozawa oracle]$ exp help=y
Export: Release 9.2.0.1.0 - Production on Sun Dec 28 16:37:37 2003
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
You can let Export prompt you for parameters by entering the EXP
command followed by your username/password:
Example: EXP SCOTT/TIGER
Or, you can control how Export runs by entering the EXP command followed
by various arguments. To specify parameters, you use keywords:
Format: EXP KEYWORD=value or KEYWORD=(value1,value2,...,valueN)
Example: EXP SCOTT/TIGER GRANTS=Y TABLES=(EMP,DEPT,MGR)
or TABLES=(T1:P1,T1:P2), if T1 is partitioned table
USERID must be the first parameter on the command line.
Keyword Description (Default) Keyword Description (Default)
USERID username/password FULL export entire file (N)
BUFFER size of data buffer OWNER list of owner usernames
FILE output files (EXPDAT.DMP) TABLES list of table names
COMPRESS import into one extent (Y) RECORDLENGTH length of IO record
GRANTS export grants (Y) INCTYPE incremental export type
INDEXES export indexes (Y) RECORD track incr. export (Y)
DIRECT direct path (N) TRIGGERS export triggers (Y)
LOG log file of screen output STATISTICS analyze objects (ESTIMATE)
ROWS export data rows (Y) PARFILE parameter filename
CONSISTENT cross-table consistency(N) CONSTRAINTS export constraints (Y)
OBJECT_CONSISTENT transaction set to read only during object export (N)
FEEDBACK display progress every x rows (0)
FILESIZE maximum size of each dump file
FLASHBACK_SCN SCN used to set session snapshot back to
FLASHBACK_TIME time used to get the SCN closest to the specified time
QUERY select clause used to export a subset of a table
RESUMABLE suspend when a space related error is encountered(N)
RESUMABLE_NAME text string used to identify resumable statement
RESUMABLE_TIMEOUT wait time for RESUMABLE
TTS_FULL_CHECK perform full or partial dependency check for TTS
VOLSIZE number of bytes to write to each tape volume
TABLESPACES list of tablespaces to export
TRANSPORT_TABLESPACE export transportable tablespace metadata (N)
TEMPLATE template name which invokes iAS mode export
Export terminated successfully without warnings.
[oracle@ozawa oracle]$
Joel P�rez -
Export & Import internal table data across the programs
Hi All,
I have two different reports,let say ZPRO1 & ZPRO2. I want to export internal table data of ZPRO1 to ZPRO2 and then I want to do some calculations in ZPRO2 with the imported internal table data(ZPRO1).
If I use 'SUBMIT' or CALL TRANSACTION syntax ZPRO1 is displaying..but I want to use only internal table data of ZPRO1.
Pls advise.
Pranitha.Hi,
Please follow the simple code and try to solve your issue.
Code in program1
types: begin of ty_itab,
matnr type matnr,
end of ty_itab.
data: it_itab type table of ty_itab,
wa_itab type ty_itab,
it_itab1 type table of ty_itab.
select matnr from mara into table it_itab.
export it_itab to shared buffer indx(st) id 'ABC'.
Code in program2
types: begin of ty_itab,
matnr type matnr,
end of ty_itab.
data: it_itab type table of ty_itab,
wa_itab type ty_itab.
import it_itab from shared buffer indx(st) id 'ABC'.
loop at it_itab into wa_itab.
write:/ wa_itab-matnr.
endloop.
Please delete shared buffer indx(st) id 'ABC', once we don't need the internal table data.
Regards
Dande -
Export / Import --- Encrypt the data
Hi,
Is it posible to encrypt some data in a table during export/import in oracle 9i database (not in 10g)?
Best regards
RajaBaskarThe main reason why people assume there are undocumented features, is because they can't be bothered to adhere to the Forums Etiquette and read the documentation prior to asking their doc question.I do not see a reason to be so rude on this. If every person reads all the documentation and uses all the features of Support services or is aware of those then we do not need these forums at all.
I mean no offence and I agree with you in lot of other cases when people just come up with unnecessary posts but this one I see as a legitimate issue which lot of dbas find in their normal work life when they have to send an export dump to a partner outside their network and the export contains sensitive data.
Thanks,
Ankit.
Maybe you are looking for
-
Calculate the MAX without using a VIEW
Is there a method to finding the Operator (OPERATORE) that respond at the maximus number of calls (CHIAMATE) without using a view like in the example? CREATE OR REPLACE VIEW MassimoChiamate as SELECT Operatore, Count(*) AS NUMERO_CHIAMATE FROM Chiama
-
Downloaded the new ios7 it didn't save any passwords and still won't.
-
Adobe for Mac 10.8.5
I have just purchased a new Mac using OS 10.8.5, but can't open pdf files which I often did on earlier OS 10 systems. Installing Adobe 11.0.4 which I have just done hasn't changed anything. What am I doing wrong?
-
I am able to access the Music Store just fine, but when trying to access my shopping cart I get the following error: We could not complete your Music Store request. An unknown error occurred (502). There was an error in the Music Store. Please try ag
-
How can I Update the table so that....
I have a table XYZ with values like x y 1 null 1 null 1 null 1 null 2 null 2 null 3 null 4 null 4 null 4 null I want to update my table so that the values for column y appears the serial no for the given x. The output would be like x y 1 1 1 2 1 3 1