Bar Code in ALV report

Hello,
Is it possible to print Barcode(for Work order) in ALV report...

Hi Perumal
In ALV there wont be any need for bar code, bcoz barcodes are only printing purpose.
barcode can be displayed using sapscript in reports.
regards
kishore

Similar Messages

Display of push button in the application tool bar in an ALV report

Hello everyone,
Query:
Is it possible to display a custom push button in the application tool bar while displaying an ALV report(1st one)?
On pressing this custom push button will I be able to display another ALV report(2nd one) based on the selection made on the current ALV report(1st one)?

Hiii..
I have written a sample code for You
"Call the below FunctionModule For Displaying The List
" And see the bolded line in the Below FunctionModule
" STANDARD_02 and USER_COMMAND are the subroutine Names
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
 i_callback_program = sy-repid
 i_callback_pf_status_set = 'STANDARD_02'
 i_callback_user_command = 'USER_COMMAND '
 i_structure_name = 'ZST_SCARR'
 is_layout = is_layout
 it_fieldcat = gt_fieldcat[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
is_sel_hide = is_sel_hide
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
 it_events = e03_lt_events[]
IT_EVENT_EXIT =
is_print = t
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IR_SALV_LIST_ADAPTER =
IT_EXCEPT_QINFO =
I_SUPPRESS_EMPTY_DATA = ABAP_FALSE
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
 t_outtab = it_scarr
EXCEPTIONS
 program_error = 1
 OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
 FORM PF_STATUS_SET
" Here Set A Button In Application Toolbar Using PF- Status
FORM standard_02 USING extab TYPE slis_t_extab.
SET PF-STATUS 'STANDA02' EXCLUDING extab.
ENDFORM. "STANDARD_02
*& Form USER_COMMAND
 text
 -->R_UCOMM text
 -->RS_SELFIELDtext
FORM user_command USING r_ucomm LIKE sy-ucomm
 rs_selfield TYPE slis_selfield.
CASE r_ucomm.
 "menubutton with functioncode GOTO's Action
 WHEN 'GOTO'.
 READ TABLE it_scarr INDEX rs_selfield-tabindex. "cursorposit.
 IF sy-subrc = 0.
 WRITE:/ it_scarr-carrid,
 / it_scarr-carrname.
 ENDCASE.
ENDFORM. "USER_COMMAND
Hope it helps..
Regards,
Simy

To disable the Application tool bar button in ALV report

Hi Everyone,
Iam using REUSE_ALV_GRID_DISPLAY to display ALV report.
Now my requirement is to disable(I mean grey out) a application tool bar button.
Thanks in advance
Moderator message: please search for available information and try yourself before asking.
locked by: Thomas Zloch on Sep 23, 2010 11:38 AM

We can disable the buttons on the application toolbar as below.
*To Exclude a few buttons from the Application tool bar
data: it_excluding type slis_t_extab.
data: wa_excluding type slis_extab.
wa_excluding-fcode = '&OUP'.
append wa_excluding to it_excluding.
wa_excluding-fcode = '&ILT'.
append wa_excluding to it_excluding.
wa_excluding-fcode = '&ODN'.
append wa_excluding to it_excluding.
and in the FM.....
call function 'REUSE_ALV_GRID_DISPLAY'
 exporting
 i_callback_program = sy-repid
 i_callback_pf_status_set = 'ZPICK'
 is_layout = itlayout
 i_callback_user_command = 'LIST1'
 i_grid_title = <fs>
* i_callback_top_of_page = ' '
 it_fieldcat = itfieldcat[]
 it_excluding = it_excluding
But,no idea on how to disable the whole application tool bar itself ?
K.Kiran.

How to use PDF417 Bar Code in Oracle Reports 6i

How to Use PDF417 Bar Code in Oracle 6i. One of my clients has a requirement that Customer Name and Address to be converted into PDF417.
Any help greatly appreciated.
Thanks,
PN

You will need to add this font to the system and Reports configuration files.
For adding font to the system, refer to your system specific guidelines for installing new fonts.
After you have installed this font on the system, you should be able to see the font in Reports builder font picker dropdown box. or with unix 'xlsfonts' command
For adding this font to the Reports application.
1. Modify the printer definition file ( you can get this info from uiprint.txt file for the .ppd or .hpd file used )
if the printer defination file is .ppd then look for "*Font Information" section and add the new font name there
like *Font <new_font_name> Standard '(00.1001)" Standard ROM
If hpd add the new font tfm file as
FONT= new_font_name
/tfm=new_font_tfm file.tfm
2. Copy the AFM or TFM ( these are fonts metrics files, which font vendor will provide ) into the relevant directory so the the Reports application should pick them up.
3. If necessary, make changes in the alias file (uifont.ali ) for mapping to this font. If the layout objects in your report are associated with the same font name as the new font then mapping is not required. But if the fonts for the layout objects are different then you need to map the original fonts to the new ones. Make sure that the mapping rules should be defined in the right section depending on the printer type being used.

Bar code font in Report server 10g

Hi
I am using an Oracle 10g Application server on SUSE linux 10 . I have a report up and running, but the bar code font ,how to install ??
Please help me
Dhana

which fonts i should use in printing the Report in Network printer under AIX Environment.No idea, I don't work on AIX. Try this site:
http://www.idautomation.com/
2D bar codes are not supported in Reports. You will need a Java solution. See this thread:
Re: how to use 2 d barcodes in reports 6i
This thread also has the suggestion to create the 2D bar code as an image. Of course, you still need some other program to create this image first.

How to generate Bar codes from Crystal Report

I understand that Bar Codes can be genrated from Crystal reports. I am using CR 2008 and trying to convert my Inventory items to bar codes. it does convert it and I can see the bar codes but it looks like; just a garbage and scanner does not recognze it plus the numners are missing @ the bottom.
Anybody has ever tried this and have some simple instructions to start with.
Any help will be appreciated highly.
Regards,

Hi,
What barcode are you using and what barcode font?
If you are using Code39 or Postnet then you need to make sure your values are formatted properly by creating a formula and using the barcode functions.
Have a search in the forum for barcodes. It's been talked about a lot and you should find your solution.
Good luck,
Brian

Incorporate Bar Code in Oracle Reports

Hi,
I want to incorporate Bar code font in character based oracle reports.Kindly let me know how to go about implementing it.Secondly is there any site from where i can download the bar code fonts freely.Also does Oracle provide Barcode fonts for Oracle Reports.
Thanks in advance
Deepak

hello,
from your question i understand that you want to create a barcode in a character mode report. this will be very difficult as it requires the destination printer to be able to print barcodes. a barcode font will not help here, as charactermode reports do not leverage fonts other than ones available in the printer.
usually it is more to creating a barcode than just printing the value in barcode font. most barcodes need special algorithms to create chechsums and similar stuff.
you might want to look into our barcode example that shows you how to use a java bean to generate a barcode.
http://otn.oracle.com/products/reports/htdocs/getstart/examples/BarcodeBeanPaper/index.html
oracle does neither ship barcodefonts nor java beans to generate barcodes for production purposes. the supplied sampels are for demo purposes only. however there are several commercially available fonts as well as javabeans on the market.
regards,
philipp

How to display BAR-CODE through ABAP report

Hi,
Could you please help me, how to display BAR-CODE through the ABAP report.
I am writing below code, but BAR-CODE is not displaying on report.
           PRINT-CONTROL FUNCTION 'SBP01'.
            WRITE: 20 BAR_CODE1 NO-GAP.
           PRINT-CONTROL FUNCTION 'SBS01'.
Regards,
SSRAJU.

Hi RAJU,
you can see this forum link and its sub-links, here it is clear about it.
Re: Barcode printing on report
Thanks & Regards,
Dileep .C

Bar Code Printing in Report under AIX Env

Dear All,
Iam using Oracle forms11g, Reports11g,Oracle11g DB in AIX Env.
My client sys is window 7. When i try to print report in a Network Printer i can able to print report.
But if any field having barcode , which is not printing.
Please guide any solution for this..
Thanks in advance
a

which fonts i should use in printing the Report in Network printer under AIX Environment.No idea, I don't work on AIX. Try this site:
http://www.idautomation.com/
2D bar codes are not supported in Reports. You will need a Java solution. See this thread:
Re: how to use 2 d barcodes in reports 6i
This thread also has the suggestion to create the 2D bar code as an image. Of course, you still need some other program to create this image first.

Print Bar code for inspection report

Dear all,
I have a requirement for printing bar code in the inspection report. Normally, we use QGA3 print inspection report which based on the script form. Now as I would like to add bar code, as I know, I have to use smart form to realize. but it can just enter Form in the standard way. So could anyone give me some useful suggestion to realize this requirement?
Thanks a lot.
Best regards,
Benny.

Hi,
Identify corresponding form.In the character format we have to define the bar code and assign that one infornt of which we need the bar code.
eg:
SE71 screen if you go the character
there below you will get the bar code
specify one character for that bar code and
in place of which u want to print place it.
for eg u have character specified as bb,
and in place of Inspection lot (w_lot) you want to have bar code
the just type.
<bb>w_lot</>, this will print the bar code for instead of inspection lot
Regards,
Krishna Mohan
Edited by: Krishna Mohan N on Jan 22, 2008 7:26 AM

Bar Code in Oracle reports 2.0

We have a requirement to print a barcode on a pick slip report (generated in Oracle reports 2.0) such as the pick slip number so that it can be scanned. Does any one have ideas on this? We are printing the pick slips on line printers (genicoms).
Thanks in Advance,
Mag

Thanks for the suggestion
I checked their web site and their solutions seem to be work if you have Oracle reports 6.0 or greater. Unfortunaltely we are still in Oracle reprots 2.0, has anyone got some ideas.
Rgds,
Mac

PDF report with bar code

Hello.
I am creating a PDF report using the Oracle Reports 6i running on Oracle Concurrent Manager.
The PDF report has a bar code.
The report finish with success but it is visualized without the bar code.
Into the output report the bar code name is small font (mw6code39mt) always.
I can visualize the output report when I manually alter the bar code name from small font to large font (MW6 Code39MT) only. I do it in my Unix server using the text editor.
The bar code name installed in my PC is large font (MW6 Code39MT)
I am experiencing problem when visualizing or printing the output report.
Has somebody experience about it or some idea about how can I to configure the Unix server or Oracle to solve the problem?
Thank you.
Edson

Hi Julie,
Sorry my english.
I will try to explain in more details the problem.
I have identified that the bar code name into the PDF output is lowercase (mw6code39mt).
I only visualize or print the PDF output with the bar code when I manually alter that bar code name from lowercase to uppercase (MW6Code39MT).
I do that in my Unix server using the vi editor.
Please, see what I need to alter in the PDF output file on Unix server:
<</Type /Font
/Name /F1
/Subtype /Type1
/Encoding /WinAnsiEncoding
/BaseFont /mw6code39mt ====> alter to MW6Code39MT
/FirstChar 24
/LastChar 255
/Widths 9 0 R
/FontDescriptor 10 0 R
>>
endobj
Thank you.
Edson

Bar code Generation in ABAP report

Hi,
Can anyone help me on how to generate bar code in ABAP report output.
My exact requirement in the exisiting 'Z' report,I need to generate Bar code for Sales order which is displaying in report output.Buisness will scan and they will use for further processing.The Device type is HPLJ5SI printer.
If possible please provide code for generating Bar code in ABAP report.
Since its very urgent, if anyone provide solution quickly it will be great helpful.
Thanks,
Senthil

internal table validation
Check here mate, should be helpful.
Mano sri

Avoid splitting of columns ALV report while download output to Excel sheet

Hi friends,
I have 170 columns in my ALV report
while downloading the report to Excel sheet
the column descriptions and values are splitting in two lines.
How can i avoid the problem.
before calling REUSE_ALV_GRID_DISPLAY function module in my code
for the Layout i assigned LS_LAYOUT-MAX_SIZE = 1023.
but still the problem is not solved.
Please help me in this Issue.
Thanks in Advance,
Ganesh

Hi friends,
I dont want to use and Keyboard shiftcntrl....
or dont want to change any code in ALV report
by simply assigning some value to any of the export parameter in ALV function module
can we achieve the functionality
Thanks in Advance,
Ganesh

ALV report for 5 Grids using Objects and Method

I have few questions in ALV 5Grids ,could you please correct me in the following program logic...
Using this program logic i am able to generate the five Grids and able to populate Header details from VBAK into Grid1,If you click in the Grid 1 and it is populating item details in Grid2 from VBAP,parallally populating the customer data in Grid5 from KNA1.
Now the pending issue is ,
if you click in the Grid2 then we should populate the shipping details in Grid3 and
if you click in the Grid3 then we should populate the billing details in Grid4.
Program Logic;
REPORT ZAREPAS20.
Tables : vbak,vbap,likp,lips,vbrk,vbrp,kna1.
DATA : OK_CODE LIKE SY-UCOMM,
 G_CONTAINER TYPE SCRFNAME VALUE 'BCALV7_GRID_DEMO_0100_VASU',
 DOCKING TYPE REF TO CL_GUI_DOCKING_CONTAINER,
 SPLITTER_1 TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
 SPLITTER_2 TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
 splitter_3 TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
 CELL_TOP1 TYPE REF TO CL_GUI_CONTAINER,
 CELL_BOTTOM1 TYPE REF TO CL_GUI_CONTAINER,
 CELL_TOP2 TYPE REF TO CL_GUI_CONTAINER,
 CELL_BOTTOM2 TYPE REF TO CL_GUI_CONTAINER,
 CELL_LEFT TYPE REF TO CL_GUI_CONTAINER,
 CELL_middle TYPE REF TO CL_GUI_CONTAINER,
 CELL_RIGHT TYPE REF TO CL_GUI_CONTAINER,
 GRID1 TYPE REF TO CL_GUI_ALV_GRID,
 GRID2 TYPE REF TO CL_GUI_ALV_GRID,
 GRID3 TYPE REF TO CL_GUI_ALV_GRID,
 GRID4 TYPE REF TO CL_GUI_ALV_GRID,
 GRID5 TYPE REF TO CL_GUI_ALV_GRID.
DATA : GT_VBAK TYPE STANDARD TABLE OF VBAK,
 GT_VBAP TYPE STANDARD TABLE OF VBAP,
 GT_LIKP TYPE STANDARD TABLE OF likp,
 GT_LIPS TYPE STANDARD TABLE OF lips,
 GT_VBRK TYPE STANDARD TABLE OF vbrk,
 GT_VBRP TYPE STANDARD TABLE OF vbrp,
 GT_KNA1 TYPE STANDARD TABLE OF kna1.
DATA:begin of itab1 occurs 0,
 vbeln type likp-VBELN,
 erzet type likp-ERZET,
 lfart type likp-LFART,
 posnr type lips-POSNR,
 END OF ITAB1.
DATA:begin of itab2 occurs 0,
 vbeln like vbrk-vbeln,
 posnr like vbrk-fktyp,
 fkart like vbrk-fkart,
 fklmg like vbrp-fklmg,
 end of itab2.
*selection screen for selecting range of values
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE text-001.
select-options: S_vbeln for VBAK-vbeln.
selection-screen end of block b1.
 CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
 CLASS-METHODS:
 handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
 IMPORTING
 e_row
 e_column
 es_row_no
 sender. " sending control, i.e. ALV grid that raised event
ENDCLASS. "lcl_eventhandler DEFINITION
 CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD HANDLE_DOUBLE_CLICK.
*DEFINE LOCAL DATA.
DATA : itab_vbak type VBAK,
 itab_vbap type VBAP,
 itab_likp type likp,
 itab_lips type lips,
 itab_vbrk type vbrk,
 itab_vbrp type vbrp,
 itab_kna1 type kna1.
*DISTINGUISH ACCORDING TO SENDING GRID INSTANCE
CASE SENDER.
WHEN GRID1.
 READ TABLE gt_VBAK INTO itab_vbak INDEX e_row-index.
 CHECK ( itab_vbak-vbeln IS NOT INITIAL ).
 CALL METHOD GRID1->set_current_cell_via_id
 EXPORTING
 is_ROW_ID =
 is_COLUMN_ID =
 is_row_no = es_row_no.
 Triggers PAI of the dynpro with the specified ok-code
 CALL METHOD cl_gui_cfw=>set_new_ok_code( 'ORDER_DETAILS' ).
WHEN GRID2.
 READ TABLE gt_VBAP INTO itab_vbap INDEX e_row-index.
 CHECK ( itab_vbap-vbeln IS NOT INITIAL ).
 CALL METHOD GRID2->set_current_cell_via_id
 EXPORTING
 is_ROW_ID =
 is_COLUMN_ID =
 is_row_no = es_row_no.
 Triggers PAI of the dynpro with the specified ok-code
 CALL METHOD cl_gui_cfw=>set_new_ok_code( 'ORDER_DETAILS' ).
WHEN GRID3.
 READ TABLE gt_LIPS INTO itab_LIPS INDEX e_row-index.
 CHECK ( itab_lips-vgbel IS NOT INITIAL ).
 CALL METHOD GRID3->set_current_cell_via_id
 EXPORTING
 is_ROW_ID =
 is_COLUMN_ID =
 is_row_no = es_row_no.
 Triggers PAI of the dynpro with the specified ok-code
 CALL METHOD cl_gui_cfw=>set_new_ok_code( 'DELIVERY_DETAILS' ).
WHEN GRID4.
 READ TABLE gt_VBRP INTO itab_VBRP INDEX e_row-index.
 CHECK ( itab_vbrp-vgbel IS NOT INITIAL ).
 CALL METHOD GRID4->set_current_cell_via_id
 EXPORTING
 is_ROW_ID =
 is_COLUMN_ID =
 is_row_no = es_row_no.
 Triggers PAI of the dynpro with the specified ok-code
 CALL METHOD cl_gui_cfw=>set_new_ok_code( 'BILLING_DETAILS' ).
WHEN GRID5.
 READ TABLE gt_KNA1 INTO itab_KNA1 INDEX e_row-index.
 CHECK ( itab_kna1-kunnr IS NOT INITIAL ).
 SET PARAMETER ID 'KUN' FIELD itab_KNA1-KUNNR.
 CALL TRANSACTION 'MM02' AND SKIP FIRST SCREEN.
 WHEN OTHERS.
 RETURN.
 ENDCASE.
endmethod.
endclass. "lcl_eventhandler IMPLEMENTATION
start-of-selection.
*write :/ 'FEDEX INT''''L' .
SELECT * FROM vbak INTO TABLE gt_VBAK
where vbeln IN S_VBELN.
creating docking container
create object docking
 exporting
 parent = cl_gui_container=>screen0
 ratio = 90
exceptions
 others = 6.
if sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Create splitter container
CREATE OBJECT splitter_1
 EXPORTING
 parent = docking
 rows = 1
 columns = 3
 NO_AUTODEF_PROGID_DYNNR =
 NAME =
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 OTHERS = 3.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Get cell container
CALL METHOD splitter_1->get_container
 EXPORTING
 row = 1
 column = 1
 RECEIVING
 container = cell_left.
CALL METHOD splitter_1->get_container
 EXPORTING
 row = 1
 column = 2
 RECEIVING
 container = cell_middle.
CALL METHOD splitter_1->get_container
 EXPORTING
 row = 1
 column = 3
 RECEIVING
 container = cell_right.
Create 2nd splitter container
CREATE OBJECT splitter_2
EXPORTING
 parent = cell_left
 rows = 2
 columns = 1
 NO_AUTODEF_PROGID_DYNNR =
 NAME =
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 OTHERS = 3.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Get cell container
CALL METHOD splitter_2->get_container
 EXPORTING
 row = 1
 column = 1
 RECEIVING
 container = cell_top1.
CALL METHOD splitter_2->get_container
 EXPORTING
 row = 2
 column = 1
 RECEIVING
 container = cell_bottom1.
Create 3rd splitter container
CREATE OBJECT splitter_3
 EXPORTING
 parent = cell_middle
 rows = 2
 columns = 1
 NO_AUTODEF_PROGID_DYNNR =
 NAME =
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 OTHERS = 3.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Get cell container
CALL METHOD splitter_3->get_container
 EXPORTING
 row = 1
 column = 1
 RECEIVING
 container = cell_top2.
CALL METHOD splitter_3->get_container
 EXPORTING
 row = 2
 column = 1
 RECEIVING
 container = cell_bottom2.
Create ALV grids
CREATE OBJECT grid1
 EXPORTING
 i_parent = cell_top1
 EXCEPTIONS
 OTHERS = 5.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT grid2
 EXPORTING
 i_parent = cell_bottom1
 EXCEPTIONS
 OTHERS = 5.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT grid3
 EXPORTING
 i_parent = cell_top2
 EXCEPTIONS
 OTHERS = 5.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT grid4
 EXPORTING
 i_parent = cell_bottom2
 EXCEPTIONS
 OTHERS = 5.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT grid5
 EXPORTING
 i_parent = cell_right
 EXCEPTIONS
 OTHERS = 5.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Set event handler
SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid1.
SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid2.
SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid3.
SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid4.
SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid5.
Display data
CALL METHOD grid1->set_table_for_first_display
 EXPORTING
 i_structure_name = 'VBAK'
 CHANGING
 it_outtab = gt_VBAK
 EXCEPTIONS
 OTHERS = 4.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH: gt_vbap.
CALL METHOD grid2->set_table_for_first_display
 EXPORTING
 i_structure_name = 'VBAP'
 CHANGING
 it_outtab = gt_VBAP " empty !!!
 EXCEPTIONS
 OTHERS = 4.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH: gt_LIPS.
CALL METHOD grid3->set_table_for_first_display
 EXPORTING
 i_structure_name = 'LIPS'
 CHANGING
 it_outtab = gt_LIPS " empty !!!
 EXCEPTIONS
 OTHERS = 4.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH: gt_VBRP.
CALL METHOD grid4->set_table_for_first_display
 EXPORTING
 i_structure_name = 'VBRP'
 CHANGING
 it_outtab = gt_VBRP " empty !!!
 EXCEPTIONS
 OTHERS = 4.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH: gt_KNA1.
CALL METHOD grid5->set_table_for_first_display
 EXPORTING
 i_structure_name = 'KNA1'
 CHANGING
 it_outtab = gt_KNA1 " empty !!!
 EXCEPTIONS
 OTHERS = 4.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Link the docking container to the target dynpro
CALL METHOD docking->link
 EXPORTING
 repid = syst-repid
 dynnr = '0100'
 CONTAINER =
 EXCEPTIONS
 OTHERS = 4.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
NOTE: dynpro does not contain any elements (ok_code -> GD_OKCODE)
CALL SCREEN '0100'.
Flow logic of dynpro:
*PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
*PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
end-of-selection.
*& Module STATUS_0100 OUTPUT
 text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'.
SET TITLEBAR 'xxx'.
Refresh display of detail ALV list
CALL METHOD grid2->refresh_table_display
 EXPORTING
 IS_STABLE =
 I_SOFT_REFRESH =
 EXCEPTIONS
 OTHERS = 2.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Refresh display of detail ALV list
CALL METHOD grid3->refresh_table_display
 EXPORTING
 IS_STABLE =
 I_SOFT_REFRESH =
 EXCEPTIONS
 OTHERS = 2.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Refresh display of detail ALV list
CALL METHOD grid4->refresh_table_display
 EXPORTING
 IS_STABLE =
 I_SOFT_REFRESH =
 EXCEPTIONS
 OTHERS = 2.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Refresh display of detail ALV list
CALL METHOD grid5->refresh_table_display
 EXPORTING
 IS_STABLE =
 I_SOFT_REFRESH =
 EXCEPTIONS
 OTHERS = 2.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
 text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'BACK' OR
 'EXIT' OR
 'CANCEL'.
 SET SCREEN 0.LEAVE SCREEN.
USER HAS PUSHED BUTTON "DISPLAY OREDERS"
 WHEN 'ORDER_DETAILS'.
 PERFORM ORDER_SHOW_DETAILS.
 when 'DELIVERY_DETAILS'.
 PERFORM DELIVERY_SHOW_DETAILS.
 WHEN 'BILLING_DETAILS'.
 PERFORM BILLING_SHOW_DETAILS.
 WHEN OTHERS.
ENDCASE.
CLEAR : OK_CODE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form ORDER_SHOW_DETAILS
 text
--> p1 text
<-- p2 text
FORM order_show_details .
define local data
DATA:
 ld_row TYPE i,
 itab_VBAK TYPE VBAK.
CALL METHOD grid1->get_current_cell
 IMPORTING
 e_row = ld_row.
READ TABLE gt_VBAK INTO itab_VBAK INDEX ld_row.
CHECK ( syst-subrc = 0 ).
SELECT * FROM KNA1 INTO TABLE gt_KNA1
 WHERE KUNNR = itab_VBAK-KUNNR.
SELECT * FROM VBAP INTO TABLE gt_VBAP
 WHERE VBELN = ITAB_VBAK-VBELN.
*REFRESH: gt_LIPS.
ENDFORM. " ORDER_SHOW_DETAILS
*& Form DELIVERY_SHOW_DETAILS
 text
--> p1 text
<-- p2 text
FORM DELIVERY_SHOW_DETAILS .
define local data
DATA:
 ld_row TYPE i,
 itab_VBAP TYPE VBAP.
CALL METHOD grid1->get_current_cell
 IMPORTING
 e_row = ld_row.
READ TABLE gt_VBAP INTO itab_VBAP INDEX ld_row.
CHECK ( syst-subrc = 0 ).
SELECT LIKPVBELN LIKPERZET LIKPLFART LIPSVBELN
 INTO CORRESPONDING FIELDS OF TABLE ITAB1
 FROM ( LIKP INNER JOIN LIPS ON LIKPVBELN = LIPSVBELN )
 WHERE LIKP~VBELN IN S_VBELN.
*REFRESH: gt_LIPS.
ENDFORM. " DELIVERY_SHOW_DETAILS
*& Form BILLING_SHOW_DETAILS
 text
--> p1 text
<-- p2 text
FORM BILLING_SHOW_DETAILS .
define local data
DATA:
 ld_row TYPE i,
 itab_LIPS TYPE LIPS.
CALL METHOD grid1->get_current_cell
 IMPORTING
 e_row = ld_row.
READ TABLE gt_LIPS INTO itab_LIPS INDEX ld_row.
CHECK ( syst-subrc = 0 ).
SELECT VBRKVBELN VBRKFKTYP VBRKFKART VBRPFKLMG
 INTO CORRESPONDING FIELDS OF TABLE ITAB2
 FROM ( VBRK INNER JOIN VBRP ON VBRKVBELN = VBRPVBELN )
 WHERE VBRK~VBELN IN S_VBELN.
ENDFORM. " BILLING_SHOW_DETAILS

Hi,
ALV means ABAP List Viewer. Most convenient way to use it is through reuse library (cf.
transaction se83) available from release 4.6 of SAP R/3.
ALV is available in two modes: list and grid. List mode is good old list processing with
standard functionnalities, and grid mode is using a new OCX object displaying grids.
Classical reports needs more coding to set the horizontal and vertical lines.we need to adjust
the lines manually.Even interactive also takes lot of code.
ALV reports reduces the code when compared to classical reports.we use function modules to
generate the output.
that r REUSE_ALV_LIST_DISPLAY,REUSE_ALV_GRID_DISPLAY,REUSE_ALV_HIERSEQ_LIST_DISPLAY etc..
the following threads will give some examples of the functions which you are expecting
Header
regarding function module
hide ALV field
Simply Display selection parameter values in the ALV OUTPUT
Drag and drop in a report
https://www.sdn.sap
Reprots
http://www.sapgenie.com/abap/reports.htm
http://www.allsaplinks.com/material.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you
use - ABAP Objects calls or simple function modules.

Bar Code in ALV report

Similar Messages

Maybe you are looking for