BarCode Scanning - PO Receipts in Forms Interface

Hi Everyone,
Need a clarification on whether the following scenario is available as standard functionality in a Forms Interface (NOT using MSCA Devices)
The supplier has shipped the entire quantity of the item ordered in say, 10 Boxes.
I shall be scanning the Item Number, Quantity, PO number from the boxes, one by one.
In the PO Receipts form, while scanning the second box, I need the quantity to be added to the already scanned quantity available in the field.
I am assuming this is a standard feature available when scanning with MSCA devices.Kindly correct me if i am mistaken.
regards,
Karthi Sankar!

I think you have covered it all.
Just add PO_VENDORS and PO_VENDOR_SITES views to get the supplier and site name/codes.
Thanks,
PS.

Similar Messages

Identifying goods movements which have been barcode scanned

Hi,
We are developing the use of ITS for barcode scanning in the warehouse, using Symbol 9090 HHDs.
The transactions used are MIGO-like:- MB01, MB11.
Goods are issued to PM orders, goods are receipted.
How can we identify and report in SAP which movements have been performed using the handheld device, and which have been performed using manual input directly in the SAP gui?
Thanks.

Hi..
I think mb51 is the apt report...filter by movement type 101 (G.R.N) and from the list filter the materials and vendor...a bit lengthy process but will work.
Edamanayil

Barcodes Scanning

Has anyone done any implementation of a scanning a barcodes into their application? I am wondering if anyone has any information on it.Ideally what I would like to do is pass the number read from the scanner to Oracle forms and then go and search for a record based upon the number scanned in.
I would appreciate the knowledge.
Many thanks,
Dorota

You can use the Group Barcode Scaner in Blackberry Messenger.

Error while opening the receipt entry form in AR module.

Error while opening the receipt entry form in AR module. We have created one new responsibility of Receivables for new operating unit . When we open the corresponding
forms , we are getting the error message as :
NO_DATA_FOUND
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-20002.
Kindly help in resolving.
We have ERP version of 11.5.10.2

Please also see the following docs.
Transactions Workbench Error: Listing of ORA Errors [ID 1336495.1]
FRM-40735 ERROR OPENING LIFE EVENT REASONS FORM BENLEVRS [ID 1517593.1]
APP-AR-96996: The Defined Sales Representatives Have Incorrect Id'S [ID 437107.1]
ARXSUDRC Receipt Classes Errors With APP-AR-96994: Please Define Sales Representatives [ID 357454.1]
Thanks,
Hussein

CE: Autorec for Multi Bank Stmt Lines to one Receipt in Open Interface

We have a requirement to auto reconcile multiple bank statement lines to a single receipt in the Open interface table. We are on 11.5.10.2 and unable to autoreconcile.
Could some one tell me how can we automatically reconcile two bank statement lines (either in same bank statement or in multiple bank statements) to a single receipt in open interface table?
FYI The transaction number in both bank statement lines and the open interface table are same
Thanks,
Ram

We have a requirement to auto reconcile multiple bank statement lines to a single receipt in the Open interface table. We are on 11.5.10.2 and unable to autoreconcile.
Could some one tell me how can we automatically reconcile two bank statement lines (either in same bank statement or in multiple bank statements) to a single receipt in open interface table?
FYI The transaction number in both bank statement lines and the open interface table are same
Thanks,
Ram

Creating a Purchase Order Smart Form (Form Interface)

After reading up on all the posts about making a PO smart form I know this:
- An SAP script "medruck" is the current output
- A smartform exists for PO's named "/SMB40/MMPO_L" or "/SMB40/MMPO_A"
- You need to install an update to get those smartforms if you are using ECC 6.0
So my dilemma is that the SAP administrator is on vacation for a week, so I can't install the update to our system. I'm trying to just create it from scratch using the medruck SAP script as a reference, but I am a little confused.
Basically all I need to know is what form interface parameters do I pass in? Meaning how do I find out what structures and tables are imported into the function module when print preview is called from t-code ME22N? Can you please provide proper syntax for form interface solution or instructions on how to determine imported variables into the smartform?

Hi
If the smartform purchase order is not available in your system
means you can download the form IDES and you can upload the form in ur ecc 6.0 system.we faced a similar kind of problem in our system and we did as i said.
Once you uploaded the things you can easily view the form interface and rest of the things related to smartforms.
Thanks and Regards
Arun Joseph

Form interface import parameter cannot be used in smartform

Hi,
When I try to use the standard parameter HEADER in a routine in a smartform, I get the error: "HEADER" expected, not "...".
I have put the HEADER definition in the Input parameters of the routine and I have tried other form interface import parameters and I do not get any error with those. So I cannot see why HEADER woudl be any differnt?
Any suggestions? Thanks.

Hi,
Thanks for your reply.
There's a smartform with this definition in the Import tab of the Form Interface:
HEADER TYPE BAPIBUS2000110_HEADER_DIS
I've created a Program Lines routine. In the Input Parameters under the General Attributes tab, I entered HEADER. This is so I can reference the table in the code. However if I do a syntax check, I get the error described "HEADER" expected, not "...".
Hope this clarifies the problem.

How do you scan in a PDF form to make it electronic and have the fields electronic?

how do you scan in a PDF form to make it electronic and have the fields electronic?

If you have Acrobat, you can create a PDF from a scan by selecting: File > Create > PDF from Scanner
This is for Acrobat 11. Previous version of Acrobat have something similar.
In order for Acrobat to be able to automatically add form fields, you will have to at least perform OCR on the PDF, but I would not expect good results. There's only so much it can do and starting from a scan is iffy. You will probably have to create the form fields yourself using the various form tools in form editing mode: Tools > Forms > Edit

PDF Form interfaces for invoice

Hi experts,
I`m implementing company forms (e.g. invoices) in PDF Forms. But I have found, that there are 2 form interfaces predefined for invoices
IS_U_BILL_IF
and
IS_U_BILL_PDF2_IF
Why there are 2 interfaces for invoice? I cannot find any references of use cases, when to use first or second one.
Thank you
Vlado

As noted there has to be a special folder level script installed on each user's system. This script can be written to access individual properties of the identity object or only a specific property. One can also create a function to access the identity object or even create new properties.

SMARTFORMS - Change an import parameter in form interface

Hello everyone,
I don't know if it's possible, but I put some program lines in my smartform to clear some fields if the last page is not reached. The problem is that these fields are from a table that's stated as an import parameter in form interface, which means that data is taken from the program, right?
Am I able to clear these fields anyway? If so, which way?
In my code I'm comparing the systems fields sfsy-page and sfsy-formpages, if they're different I clear the fields, otherwise I don't, actually I did it because the conditions don't get the result as I wish. If I check "only after the end of main window" the whole table doesn't appear in my form and I don't want that.
PS: I didn't set this condition on table, I set it in the text.
Any ideas?
Thanks in Advance.

Hi,
You can do one thing.....create an internal table in the smartform itself....transport those values in this table and display the fields using this table only.
Now if the last page is reached u can use the main table (that is imported from the program). This way the original data is not cleared.
I hope it helps.
Regards,
Shraddha

Error in the import tab of form interface with parameter name

Hi Experts,
                in the import tab of form interface i have define the following..
          Parameter Name               type assignment                  Associated Type
         t_vbrk                                    type                                         vbrk
and then in a loop i am using this as follows...
t_vbrl into fs_vbrk
after executing check i am getting the error 'T_VBRK" is neither specified under "TABLES" nor defined as an internal table.'
plz help me out with this.....
why this error is occuring?
thnks n reagrds,
Ashmita

Hi,
U cannot loop the import tab i think....Give tat one in tables statement and execute..
t_vbrk type vbrk in Tables tab...
I think it will solve ur issue..

Error in form interface

Hi,
I had an error in form interface.I declared as,
IN_VOICE      TYPE            VBRK-VBELN for parameter.
error: "VBRK-VBELN" is not a pre-defined type or a type from a type group.

Hi dilip,
Declare in the Import tab in the global definitions:
t_vbrk type y_ty_vbrk.
t_vbrp type y_ty_vbrp.
Create the table types for these two parameters (t_ vbrk and t_vbrp) in se11.
In the driver program declare:
fs_vbrk LIKE LINE OF t_vbrk,
fs_vbrp LIKE LINE OF t_vbrp.
Regards,
Sravanthi

SAP WM 6.1 : Barcode Scanning Time&Date stamp capture

Hi Experts,
Our client have new requirement: we enable the Barcode scanning functionality for Functional Location in Notification screen, when user scan the functional location we need capture the time & date stamp also. I am able to capture the functional location but not able to capture the date&time stamp of barcode scanning.
can any body guide me how to capture the date&time stamp during scanning.
Thanks
Chigari

Chigari,
How you accomplish this will depend on where exactly you are scanning.
If you are on a transaction screen you can simply add an additional property to the transaction to store the current date and time.
If you are scanning to a list screen then you can look at adding / updating the single match action and no match actions to add in a transaction to store the timestamp.
--Bill

Difference between Form Interface and Global definitions in Smartforms.

Hi guys!
I'm learning about Smartforms.
I would like to know which is the difference between Form Interface from the Global Settings and Global Definitions from Global settings as well, because in both of them I have to declare tables, structures, variables, etc. Could you please explain to me when should I use them?
Thanks!
Gaby

Two ways to use Smart Form:
1. by using Application Program
2. By coding in Smart form itself.
Now, if the 1st method is used then same interface can be used for multiple requirements. For eg two different programs Z1 and Z2, may use same interface. Hence a lot of efforts are reduced.
On the other side in 2nd method, multiple forms have to be created to fulfill different requirements.
Now, Global Definiton is something that is irrespective of which Program is being used, the form nodes can use the Global definition in all cases.
Also all tables etc must be declared in the Global setting.
Regards,
Sana

Re: Adobe forms - interface type

Hi...
    When Iam creating the interface ... it is asking Description and
                                           interface type as         ABAPDictionary- Based interface
                                                                            XML Scheme- Based Interface
                                                                         Smartforms-Compatible interface...    Have to select one option.. In some Examples I didnt see this interface type Option... what is the use of this interface type...
Thanks & Regards,
Abaper..

hello again,
i tried to list all the things u need to know to create your interface:
1.      Open the required interface in the Repository Browser of the ABAP Workbench.
2.      The Interface tab is displayed. Under Form Interface, double-click the Import node
3.      You see a screen for entering import parameters. This screen also shows the standard parameter /1BCDWB/DOCPARAMS. You cannot change this parameter.
You use this parameter in your application program, to specify the value for the language setting, for example. To display this structure in the ABAP Dictionary, double-click the SFPDOCPARAMS type.
4.      XML schema-based interface
○     The standard parameter /1BCDWB/DOCXML with the type XSTRING is used for sending data from the application program.
ABAP-based or Smart-Forms-compatible interface
○     To insert a new line, choose Insert Line (This graphic is explained in the accompanying text). Enter the parameter names of the data you want to import. These names are valid for the whole form and do not have to match the variable names in the data collection program. All data types are valid. TYPE can be selected under Type Assignment.
5.      When you double-click Export, you see the standard parameter /1BCDWB/FORMOUTPUT of the generated function module. You cannot change this parameter.
Note: You use this parameter in your application program, to make the generated form available as a PDF for further processing, for example.
6.      To display the exceptions used by the generated function module, double-click Exceptions.
7.      Activate the interface.
Note: At runtime, the application program must provide the parameters. If a parameter has been defined in the form, but is not defined when the application program is called, then the output of the form ends with the program crashing (hex dump).
However, it is also possible that the application program provides parameters that the form does not need. You do not need to mention these parameters in the form; they can also be specified in a different order from the code of the application program. This has the advantage that an application program can work with several different forms.
Hope this helps
Cheers

BarCode Scanning - PO Receipts in Forms Interface

Similar Messages

Maybe you are looking for