Basic css question
Hi all this is a basic question but I need to ask it
Ther h1, h2, h3 classes that are set normally at the
beginning of each style sheet does that meanm that the same values
are set throughout the whole page? If I have another div how can I
set another value for the h2 and how would I do it? Is it the same
for classes and divs? Sorry just trying to to understand it,
thanks
And, since a given ID can only be used once per page, it
would only apply to
the first such container it found. A class can be used many
times on a
page, and so it would apply to every such container.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Michael Fesser" <[email protected]> wrote in message
news:[email protected]..
> .oO(Hydrowizard)
>
>>Thanks for the replies so if I made did h1, h2 {
font-size: 80%;} for
>>example
>>then if I had an h2 in another div which I wanted
with font size 40% thyen
>>how
>>would I make the font-size change?
>>
>> like this?: #mynewdiv h2 {font-size:40%;}
>
> This matches all h2 inside a div with the ID 'mynewdiv',
e.g.
>
> <div
id="mynewdiv"><h2>...</h2></div>
>
>> like this?: .mynewdiv h2 {font-size:40%;}
>
> This matches all h2 inside all divs with the class
'mynewdiv', e.g.
>
> <div
class="mynewdiv"><h2>...</h2></div>
> <div
class="mynewdiv"><h2>...</h2></div>
>
> Micha
Similar Messages
-
Basic CSS question. New learner
I am just learning CSS and HTML and I have a basic question. How can I make my float left div's expand down for content? I have a wrapper and within my wrapper I have 3 columns all floated left with margins added to them, I ommited height so that my columns can expand as I add stuff to it. I have content on my columns, but instead of wrapping the content down as I add...the div's are expanding and dropping below each other because there is no space for them. I tried clearing, but I am not sure I understand the clear property well so I stuck "none" in there for now. Here is my HTML and CSS:
<body>
<div id="wrapper">
<div id="head"></div>
<div id="slideshow"></div>
<div id="menu"></div>
<!--End Navigation-->
<div id="firstcolumn">stuffstuffstuff
stuffstuffstuffstuffstuff
stuffstuffstuffstuffstuff
stuffstuff</div>
<div id="secondcolumn">stuffstuffstuff
stuffstuffstuffstuffstuffstuffstuff
stuffstuffstuffstuffstuff</div>
<div id="thirdcolumn">stuffstuffstuff
stuffstuffstuffstuffstuffstuff
stuffstuffstuffstuffstuffstuff</div>
</div>
<!--End Wrapper-->
<div id="footer">This is my footer</div>
<!--End Footer-->
</body>
</html>
-------CSS---------
body {
margin: 0;
font-family: Verdana, Geneva, sans-serif;
font-size: 10px;
background: url(images/bg.png) #666 repeat;
#wrapper {
margin: 0 auto;
width: 975px;
background-color: #CCC;
height: 1000px;
#head {
width: 975px;
height: 100px;
background-color:#666;
position: relative;
#slideshow {
height: 110px;
width: 975px;
position: relative;
background-color: #066;
#menu {
width: 975px;
height: 30px;
background-color:#999;
position: relative;
#firstcolumn {
width: 315px;
float: left;
position: relative;
background-color:#666;
clear: none;
margin: 10px 10px 0px 10px;
#secondcolumn {
width: 305px;
float: left;
position: relative;
background-color: #CCC;
clear: none;
margin: 10px 10px 0px 0px;
#thirdcolumn {
width: 315px;
float: left;
position: relative;
background-color:#666;
clear: none;
margin: 10px 10px 0px 0px;
#footer {
margin: 0 auto;
width: 975px;
height: 200px;
position: relative;
background-color:#666;
This is what I am seeing on my display in Dreamweaver. As you can see, these rectangular elements are my div's. They are supposed to line up side by side, but my "content" isn't filling my div's properly, but rather expanding them causing my div's to drop down below each other.
Thanks for any input.It would be much easier to advise you if you could post a URL for a site or page.
Height and CSS is a bit of mystery to me but the most simple principle is that content is the way to give an element height. There are ways around it and you might like to Google "Faux Columns CSS" or something like it. The principle is that you construct an image that is a slim band of color that align with your intended columns. You apply that image as a background in you CSS and set it to repeat down the page. Then as your content grows or differs the graphic takes care of that.
There are other ways such as using positioning and javascript but they are more complicated.
Martin -
Basic CSS Question - But Can't Sort Out for Self
On my index page, I am creating two divs within my template: .property#links and .property#listings
http://12caliboguecay.com/index.htm
I have tried applying css to these elements, but nothing seems to happen and I am flummoxed as to why. Help?
Also, a refresher on this...why am I applying a class to the div to make it work? why not just call an element a div? what does the class do for me?
Thanks for any assistance.
Samantha.property#links and .property#listings are valid CSS selectors.
.property #links (with whitespace between them) is a descendant selector:
<div class="property">
<div id="links>
whereas
.property#links (no whitespace between) is a multiple selector where class="property" and id="links" are found within the same tag:
<div class="property" id="links"> -
Hi everyone, I have two CSS questions regarding my layout.
First off, it is located at:
http://robles.clunet.edu/~ssmi/tsr9/tsr9template.html
The CSS is embeded in the file (it will linked from a
different file once I am done with this design, but beside the
point)
My first question is about how I can keep the right top image
from being bumped down to the next line when the window is resized.
I want it to squeeze into some, but then at a point have the scroll
bars kick in.
My other question is how I could make the title image "The
Scott Report" centered between the two left and right images up
top.
Could anyone help out?
Thanks a lot!Check the AppleCare number for your country here:
http://support.apple.com/kb/HE57
Call them up, and let them know you would like to be transferred to the Account Security Team. -
I have some Basic iPhoto questions before I start using the program:
- does iPhoto apply any compression or change images in any way when they
are imported?
- after images are imported, can the original source folder of images be deleted off of the mac?
- can Quicktime files exported from iPhoto be viewed on a Windows computer?
- can iPhoto handle large resolution images that might be as large as 8-15mb each? does it display them quick? are there any known file size issues?
Thanks!!!!kat.
Is there a way to use iPhoto on a network so other users can read and possibly write to an iPhoto library on a networked mac?
iPhoto is a consumer level photo organiser, not a server. It's possible to share photos but libraries are very difficult and fraught with the danger of database corruption. Some have reported success.
Is it possible to password protect or secure certain images in the library so they can not be seen by anyone?
No. The best I can suggest there is to create a second library and store it in a secure area like a protected dmg. But remember, you can only have one library open at a time.
After photos are deleted from iPhoto, are there any remaining traces or cached files anywhere other than the trash
If you delete photos from iPhoto and empty the iPhoto trash then the pics are removed from the Finder as well. They remain as findable as any other deleted file from that point, which is, very, if the searcher in knowledgeable.
Regards
TD -
Object class deployment - Basic form question
OK, I subclass calendar object from Oracle provided standard
object class. What do I need to deploy to use this form now
apart from calendar.pll and my fmx. What about the object class
from which I sub-class. Do I need to compile and deploy that
also? How will form resolve this on run time the parent object
class as I really did not copy, just sub class and we do not
deploy original class? Basic form question. Thanks.You can set the "help" property on the field (which gives you the little "information" icon link beside the field).
You could also try adding another field of another class above or below:
<Display class='InlineAlert'/>
<Display class='ErrorMessage'/>
<Display class='HtmlPage'/>
..etc
-Rob -
I have a picture i am trying to put inside a div that has a class already which makes pictures have a frame around them when i insert them into it, which is fine for the main image but i am trying to add an extra image in there and i dont want that frame to be there.
I will attach a picture and a link to the site i am talking about.
If anyone can help me with this CSS question or how i can go about getting rid of the frame around the step 1, step 2 and step 3.
eWeb Solutions Website Development
Thanks!Take the frame class out the div and apply it to select images like this:
<div>
<img class="frame" src="step1.jpg">
<img src="picture1.jpg">
</div>
<div>
<img class="frame" src="step2.jpg">
<img src="picture2.jpg">
</div>
Nancy O. -
Adding Date/Time Field + X Number of Days - Basic Calculation Question
I am assuming this is a basic calculation question. New to Adobe LiveCycle Forms.
I have a simple form containing a table. The table appears as such:
Text
Formatted as Date/Time Fields
Header 3
Monday
user wil choose the beginning date (Date/Time) this is DateTimeField1
Tuesday
this should calculate DateTimeField1 + 1
Wednesday
this should calculate DateTimeField1 + 2
Thursday
this should calculate DateTimeField1 + 3
Friday
this should calculate DateTimeField1 + 4
Saturday
this should calculate DateTimeField1 + 5
Sunday
this should calculate DateTimeField1 + 6
Calculations are performed after the date is chosen for Monday. My mind tells me the simple calculation of DateTimeField1 + 1 is not going to work (and in fact doesn't!) as it needs to change Monday to a number first. I saw on another thread the following:
Num2Date(Date2Num(Date(DateTimeField1), "DD.MM.YYYY")+7, "DD.MM.YYYY")
Thought this was going to get me close. No cigars though!
Any quick help is greatly appreciated. And since I am new to this, details about what needs to be changed would be great too!
ThanksHere an addition for you date field.
This FormCalc script in the exit:Event will check it the selected date is on a monday.
If not it will go the days back until the last monday.
var Selection = Date2Num($.formattedValue, DateFmt(2))
var WeekDay = Num2Date(Selection, "E")
var NewDate
if (WeekDay eq 1) then
NewDate = Selection - 6
elseif (WeekDay eq 3) then
NewDate = Selection - 1
elseif (WeekDay eq 4) then
NewDate = Selection - 2
elseif (WeekDay eq 5) then
NewDate = Selection - 3
elseif (WeekDay eq 6) then
NewDate = Selection - 4
elseif (WeekDay eq 7) then
NewDate = Selection - 5
else
NewDate = Selection
endif
$ = Num2Date(NewDate, "EEE DD.MM.YYYY")
Hope this helps, too. -
My main question is a very basic exporting question, but here is a super-condensed explanation of my big-picture goal for context:
Large (~450 MB) aiff on CD --> trim w/ Quicktime --> small (~16 MB) MP3 in iTunes
I would like to take an audio file (aiff) that is approximately 450 MB and export it from Quicktime and in doing so, reduce the file size and convert it to MP3. When I simply try to export it, it doesn't ask me about what size I want, nor does it give the option of MP3 formatting.
I have figured out how to reach my goal, but it's a mess. After I make my trims in QT, I have to:
1. select "share" instead of "export".
2. It asks me what size I want and I select small.
3. The file is then exported as a Quicktime movie into Mail and the size is reduced from 450 MB to about 20 MB.
4. I then have to "right-click" on the attachment in the email that is created,
5. save the attachment,
6. discard the email,
7. import the file into iTunes, and
8. create an MP3 in iTunes to finally arrive at my goal.
This seems like a ridiculously convoluted process to change a large aiff to a small MP3 and put it in iTunes. Any suggestions?Thanks. I guess the basic answer to my question is that it can't be done in one or two fell swoops. The problem is that it starts on a burned disc, and I need to make edits to it before it ends up in iTunes (to be eventually used in iWeb). I was hoping to avoid juggling back and forth between iTunes and QT. I either would have to send it back to QT to do the edits after -->iTunes-->mp3, or import the large file from the CD to QT, make the edits, save changes, import large file to iTunes, convert to mp3.
-
CheckboxDatagrid (extended) CSS question
Hello
In our application we make use of the CheckBoxDataGrid, which rocks.
We are playing with the CSS and noticed that we arent able to change the "chromeColor" property, in CSS. Only in the MXML.
I would like to set the style in the CheckBoxDataGrid super class, but I do not see a way to specify "headerStyleName".
How and where would that occur in an extended class? Would it need to happen in the constructor?
Also, how would you re-assign the CSS, in ActionScript, in this extended DataGrid class? Any ideas?
Any help is appreciated, thanks folks!kumar wrote:
Browser: IE 7 (** Is it the browser issue**)Yes. Interactive Report CSS question.. expands the page width to accommodate the IR, with a scrollbar on the viewport that allow the user to view the full width.
Remove
#apexir_DATA_PANEL {
margin-bottom: 10px;
overflow: auto;
}The IE7 bug can be addressed by feeding it the following CSS fix targeted at pre-IE8 browsers with a conditional comment in the page HTML Header:
<!--[if lt IE 8]>
<style type="text/css">
#too-wide .rc-body {
float: none;
</style>
<![endif]-->Specify the <tt>too-wide</tt> static region ID on the IR region for use as a CSS selector.
However, presenting information in a way that requires users to scroll the viewport horizontally is clunky. This will be particularly true in combination with an IR. Think about the user experience: is there an alternative way of displaying this information? -
Basic CSS Functionality Questions
Hi,
I have a CSS 11501 loaner on the way from Cisco, but was hoping to ask a few questions ahead of time. I am relatively new to this, so bear with me.
I have three offices connected via a VPN between two pix devices. Local users and anonymous web traffic all funnels through the remote office. I am hoping I can incorporate a CSS box to direct traffic (via a VPN to another pix) to a third office in the event the www server at the main office is not reachable, but return to the first office when it is back online.
I am a little confused by VIP. Right now, my domain name resolves to an IP address on the outside of my pix which NATs and sends the request on to my web server. If the CSS is behind it, do I create a VIP that maps to the actual IP of the www server, and have the pix send traffic to the VIP?
I have read the PDFs found online, but am still a little foggy.
Thanks,
JMthe Pix will have to send the traffic to the VIP.
The VIP should be an address existing only on the CSS and that the rest of your network knows how to reach.
The CSS will then nat to the real server ip.
Gilles. -
I'm taking over the maintenance of someone else's site and I want to add some simple CSS that will create some text that I can apply to areas intended for lots of text to be read.
1.) Would adding the following to the CSS file serve my purpose?
.readingtext {
font-size: 1.2em;
font style: arial
font color: #000
2.) How do I then add the styles to any blocks of text in DW to apply this style?
Thanks in advance.Yes, I did mean to format some text.
I do not have a link to a page because it is all offline right now.
As an example, this bulleted list is in all bold, and I am not quite sure why, so I wanted to format it differently. There are pages that have text in tables like this, and they do not show up all in bold. How would I apply the new style to this text? Thanks!
</th>
<th width="149" scope="col"> </th>
</tr>
<tr>
<th height="83" align="left" valign="top" scope="row"><ul>
<li> Room 2123 </li>
<li> Room 2124 </li>
<li> Room 2125 </li>
<li> Room 2126 </li>
<li> Room 2127 </li>
<li> Room 2128 </li>
<li> Room 2129 </li>
</ul></th> -
Hello!
I have a very basic theme / csss question:
Working with Oracle XE and Apex I want to create my own theme. Therefore I tried to use
http://wiki.shellprompt.net/bin/view/Apex/ThemeTips
But thereit says:
1. Copy the theme_4 images directory to theme_100
But where do I find the theme_4 images directory???
All I found was:
Shared Components -> Themes
But how can I open the css file (2nd step)??
Excuse me for beeing this stupid...
Thank you
JohannSearching the XE Threads I found out, that
http://myserver.com:8080/i/themes/theme_4/
shows me the themes 4 directory using webdav.
But how writing there?
Bye
Johann -
CSS question - complete Novice
i know some of you people must dispair at novice questions
but we all need to start somewhere don't we. i have had dreamweaver
for 18 months and have hardly used it but now i am starting to
learn. basically my problem is this...and i bet it's an old
chesnut.
i have two different places on my website that have links,
one with a green background, that on hover turns white.... thats in
the settings. thing is i want an email link thats on a white
background in the same page, i have tried different colurs but it
just doesn't look right.
could anyone tell me in simple terms what i need to add to
either the CSS file or change something in settings that allow me
to do this.
sorry if this has been asked before...thanks for your help,
Bryan
PS i am using MX 2004Pseudo-classes and container styles are what you need - here
are some
tutorials.
http://www.mako4css.com
http://www.thepattysite.com/linkstyles1.cfm
http://www.projectseven.com/tutorials/pseudoclasses/index.htm
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"beebbuoy" <[email protected]> wrote in
message
news:eng6jm$8dg$[email protected]..
>i know some of you people must dispair at novice
questions but we all need
>to
> start somewhere don't we. i have had dreamweaver for 18
months and have
> hardly
> used it but now i am starting to learn. basically my
problem is
> this...and i
> bet it's an old chesnut.
>
> i have two different places on my website that have
links, one with a
> green
> background, that on hover turns white.... thats in the
settings. thing is
> i
> want an email link thats on a white background in the
same page, i have
> tried
> different colurs but it just doesn't look right.
>
> could anyone tell me in simple terms what i need to add
to either the CSS
> file
> or change something in settings that allow me to do
this.
>
> sorry if this has been asked before...thanks for your
help, Bryan
>
> PS i am using MX 2004
> -
Sorry for the basic question, but what I am trying to figure
out is the best way to do something. I have a main table and I want
to insert a table into it for a nav bar about 1/4 of the way down
on the main table. I am wondering which of these 3 ways to "best"
do it, all 3 I have played with do but I am wondering the best way:
1 - place it to align at the top and hit the return key
before until is down to where I want it
2 - place a empty table above it and make the height of it an
amount to push the nav bar table down to where I want it
3 - place it to center align and then use a margin on the
bottom to push it up to where I want it
Thanks.614mike wrote:
> Sorry for the basic question, but what I am trying to
figure out is the best
> way to do something. I have a main table and I want to
insert a table into it
> for a nav bar about 1/4 of the way down on the main
table. I am wondering which
> of these 3 ways to "best" do it, all 3 I have played
with do but I am wondering
> the best way:
>
> 1 - place it to align at the top and hit the return key
before until is down
> to where I want it
Definately NO
> 2 - place a empty table above it and make the height of
it an amount to push
> the nav bar table down to where I want it
Height is invalid so NO
> 3 - place it to center align and then use a margin on
the bottom to push it up
> to where I want it
Nearly. Why don't you align it to the top and use a top
margin to push
it down....that's more logical.
Use some css like this:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN"
http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1">
<title>Untitled Document</title>
<style type="text/css">
#mainTable td {
background-color: #CCCCCC;
#menuHolder {
margin-top: 100px;
#menuHolder td {
background-color: #99CC99;
</style>
</head>
<body>
<table id="mainTable" width="730" border="0"
cellspacing="0"
cellpadding="0">
<tr>
<td valign="top">
<table id="menuHolder" width="730" border="0"
cellspacing="0"
cellpadding="0">
<tr>
<td>Menu</td>
</tr>
</table>
<p>Other Content</p>
<p>Other Content</p>
<p>Other Content</p>
<p>Other Content</p>
<p>Other Content</p>
<p>Other Content</p>
<p>Other Content</p>
<p>Other Content</p>
<p>Other Content</p>
<p>Other Content</p>
<p>Other Content</p>
<p>Other Content</p>
<p>Other Content</p>
</td>
</tr>
</table>
</body>
</html>
Maybe you are looking for
-
Po list showing the total amount with advances given & open GR quantity
Hi Gurus, My client need to know the list of total p/os showing its gross total amount only (& not with the line items) with the advances rendered to them & its open GR quantity against total qunatity mentioned. I hv tried in ME80FN, ME2N, ME2L ME2M.
-
Flash player crashes in videoseek
Hi, I have a very difficult problem, because I cannot find the point where my osmf player crashes of video seek. It is different from time to time. In some cases it crashes after the third seek, sometimes on the first. The main scenario is that the r
-
Cannot Assign Archive and Retention Policies in Outlook 2010
We are having problems figuring out how we enable Archiving and Retention tags in Outlook. We have a new Exchange 2010 server with an Enterprise license key. We have run Microsoft Office professional plus 2010 on all of our clients (licensed through
-
Will it make any sense to create materialized view on top of a MOLAP cube?
Hi, We have developed few MOLAP cubes for our reporting environment. Now we are planning to create materialized with query rewrite enabled for faster performance? Is this a correct approach? Will it make any sense? I mean will i get any performance i
-
Hi, i want to use on change of instead of AT NEW cause the itab-field blnr has n index and every time when this index changes the AT NEW command makes a group change and this is not correct. so i want to use the ON CHANGE OF command but i don't know