Basic Customizing for new SCM system

we are implementing a brandnew SCM 5.0 system. Does one of you know where I can find a checklist what steps should be done as "basic" setup?
I'm talking about things like:
- setup RFC destinations
- define logical systems
- Create model 000
- Create planning version 000
Thanks and Regards

It depends on which are the SAP Modules-Functionality you are implementing
In your list you can add
-- CIF related to settings
-- Live Cache settings done properly or not (Basis Team)
-- SAP Standard Planning area/Infoobjects are present in the system or not
-- Planning Object structures are active or not
-- Consistency check to be done for Live Cache, DB, Time seris etc
Rest in more details you can get from the link

Similar Messages

  • Basic customizing for warehouse number 0001 in EWM (Add-on)

    does anyone know how to get the basic customizing for warehouse number 0001 into the EWM?
    Our EWM is installed as add-on, so the client copy from client 000 to my client will not work (I would override also the ERP customizing this way).  I think it would work with the BC sets, but I couldn't find a list which of them have to be activated for the basic customizing ...

    Hi Monica
    There is a whole bunch of BCsets which have been arranged in a heirarchical order as per the way they should be implemented in the standard system. They have all the settings to set up WH 0001 with structure, product, HU etc. The main BC set which has this is '/SCWM/BASICS'. This is a heirarchial BC set which has all the required config step by step.
    Further more there are specific BC sets for setting up the standard config for inbound and outbound deliveries - '/SCWM/DLV_INBOUND' & '/SCWM/DLV_OUTBOUND'.
    You can use these to get the basic config in place.
    Hope this helps.
    Thanks and regards
    Deepak Joshi

  • Basic customizing for COPA extractors

    we are working on account-bassed CO-PA extractors of SAP ECC 6.0 in order to be able to analize finance data in BW7.0.
    We are having problems with the extractor so, I need help for the basic customizing of COPA because we are having the following errors:
    Error KM 443: No profile has been assigned (TKA01-CVPROF) to controlling area HHSC.
    Error GP 526: Version 0 is not set up for controlling area CO = FR01.
    Any help will be welcome.
    Best regards.

    Hi Monica
    There is a whole bunch of BCsets which have been arranged in a heirarchical order as per the way they should be implemented in the standard system. They have all the settings to set up WH 0001 with structure, product, HU etc. The main BC set which has this is '/SCWM/BASICS'. This is a heirarchial BC set which has all the required config step by step.
    Further more there are specific BC sets for setting up the standard config for inbound and outbound deliveries - '/SCWM/DLV_INBOUND' & '/SCWM/DLV_OUTBOUND'.
    You can use these to get the basic config in place.
    Hope this helps.
    Thanks and regards
    Deepak Joshi

  • 2 SCM 4.0 Optimizer instances for one SCM system as high availability?

    Can we install more (i.e. 2) seperate SCM 4.0 Optimizers and connect them both to one SCM Server system?
    If yes:
    1) Can/will the SCM Server system used both optimizers?
    2) If one failes, can/will the SCM server then just use the one still running
    Best regards

    Hi Larsen
    Since optimizer is just exe.file, you can install several optimizers<engine> (put exe.file into
    different location <folder>) and it should not be in same HW. And in the IMG customize you can priolatize Optimizer engine. So system can use several engine depending on the priority (or for some component like CTM, you can specify engine and run CTM in parallel with using different CTM engine for different objects.
    And I know 1 company who install 2 CTM engine into 2 servers for high availbility solution (This means active server A has 2 CTM engine/ stand by server B has 2 CTM engine).
    To use fail over scenario with several server, I think you need to define following customize in SCM system.
    T-CD /SAPAPO/COPT01 (Define directly and engine name)
    T-CD /SAPAPO/COPT00 (Check availbility of Server)
    <Also RFC definition should be correctly customized in SM59).
    best regards

  • Feedback for new Email system - do you like it, or...

    Does anyone know whether it is possible to give feedback  on the new email system to anyone in BT who might listen (and preferably do something about it)?
    I am finding it much slower that the previous version; I don't like the pop up messages - email sent - do you really want to log out, etc; I don't like the fact that it times out constantly, even in the middle of an email.  I don't like the fact that it's greyed out every time you log back on, so you have to make the same decision about cookies half a dozen times every day - after telling it N times that I wanted "functional" only, I've now given up - it changes back every single time to the default system - so what's the point in asking.
    I've been using email for a good few years now, other systems as well as BT, and have not come across anything that is quite so annoying, difficult to operate and generally "nannyish"
    Is it just me, or is anyone else finding it a bitter pill to swallow?  Someone on the Forum suggested I use Thunderbird, but having looked into it, it seems to have very mixed reviews.  The only good thing about BT is the anti-virus software - would that still work if I went through another system?

    Hi AnneH,
    Umpire here from the other thread.
    I see you still haven't taken the plunge and tried an e-mail program. Not sure about mixed reviews of Thunderbird (are you sure they were recent reviews as it has been around for many years). I have used lots of different e-mail programs over the years and currently use Thunderbird on my home PC. Anyway, you can use any e-mail program you want to. Windows Live Mail will do the same job, as will many others.
    The reason why most people recommend either Thunderbird or Windows Live Mail is just because they are the ones in very common use. They are from the same people (Mozilla and Microsoft) that also provide the commonly used Firefox and Internet Explorer web browsers respectively.
    You really need not worry about the security. In fact I would say that an e-mail program is always going to be a more secure way of accessing your e-mail accounts. A large proportion of computer malware is aimed at web browsers. Webmail is always going to be obvious target for those trying to steal your personal info. The virus checking that BT do on their mail servers will still be taking place in exactly the same way if you use an e-mail program. You will also still find things moved to the Spam folder by BT.
    The commonly used PC security software packages will also fully integrate with the common e-mail programs and check messages for viruses in the background. E-mail programs often also offer additional spam checking services (in addition to the BT spam checks) which you can turn on/off should you wish to. Personally I find the BT checks sufficient and keep things simple. 
    Ask yourself this. If an e-mail program offered a lower, riskier level of security then why would so many people with more technical knowledge/experience use them? Also why would most large companies and corporations use them?
    I appreciate that what you would like is for BT to drastically improve the webmail interface and allow you to just carry on using that stress free, but is that really likely to happen in the near future?

  • Activating transfer rules for new source system

    we are having 2 R/3 source system in BI. I had activated all the transfer rules with the first source system and now i have created a new source sytem connecting to a different R/3 client. I tried to change the transfer rules point to the new source system using the program RS_TRANSTRU_ACTIVATE_ALL giving the new source system and the infosource name. But i get the error "No Transfer Structure Selected" when i execute the prg.
    how can i change the source system without creating the transfer rules for the new source but use the existing transfer rules and just change the source system assigned to it????

    Hi Sujai,
    There are many cases when this program is used.
    When the Trans rules get de-activated due to impact,we need to first replicate the data source and activate the TR using this program.This generally occurs during the data loads in prd.
    It does not makes sense to transport it when there r no changes done to the TR.So simply,u can use this program to activate.
    If the program does not work,then you are left with the transport option.
    Thanks & Regards,

  • Basic Settings for new BW QA Box

    Hi All,
    i got a problem in BW QA.
    The BW QA server was a new one. I have created new requests for all the master data infosources and transported them sucessfully.
    The problem is when i opening the infopackage which was transported to QA i am getting a popup with "Caution ! - The transfer method has changed" and when i see in the infopack the processing method was changed to ALE and i could'nt see the PSA option there. The infopack in Dev was with psa.
    This is the case with all the infopacks in QA.
    Do i need to do any settings as this is a New QA box.
    Can anyone send me the basic settings need to done for the new BW qa box document.
    Thanks in Advance
    Appreciated with Rewards

    have you created the source systems in QA - that should be done and when you transfer - make sure you have also transferred the datasource ...
    Hope it helps...

  • Hard Drives and video card for new CS5 system

    I've read through much of the threads in the hardware forums and find I still have questions.  I am just beginning to learn how to edit and it is not a source of income for me at the moment.  My sources will be from tapes from my Canon HV20 and at some point either a Panasonic GH2, Canon 60D or similar.
    I have bought the following:
    ASUS P6X58D-E motherboard
    24 GB of Patriot Sector 7 DDR3 1333MHz memory (9-9-9-24)
    Intel i7-950 3.06 GHz CPU
    I plan to use Cineform NEO or maybe NEO HD to ingest my files.
    I also have 4 Seagate 750GB 7200.11 hard drives I can use.
    It seems like the best bang for the buck for a video card is a GTS 450 at about $100 because I can't find any data that indicates a GTX 460 or a GTX 570 would make any difference (see
    As far as hard drives goes, Harm's article on creating separate storage makes sense to me.  It seems like I could create a "4 drive" system quite easily (see  Given that I am not ready to spend moeny on an Areca card until I can develop my skills,  I am wondering if I should get one of the new WD Velociraptor 600GB (SATA 6) drives as my system drive for about $280, a 150 GB (SATA 3) Velociraptor drive for about $100, or some other fast drive.
    Given that my motherboard can support RAID, should I consider RAIDing the "D" drive or the "E and F" drives?
    Is there any value to using an SSD drive for the "E" drive (page file and media cache) [see]?  Microcenter has a 64GB drive for $100.
    Thanks in advance.

    Hi Harm,
    First let me say, I didn't mean to exclude Bill Gehrke.  I just didn't know what was what.  Thank you for explaining that to me.  Let me also say the you and Bill have a great site.
    I have a question for you,  in the tests I have run with my systems, I am not seeing any speed difference between the 450 and 480.  Now granted, they are AMD processors and I know they don't have the SSE 4.1+. Here are my systems that I ran the tests on:
    An AMD X4 Quad Core computer running at 2.9 Ghz with 12 gigs of RAM and a single Samsung 7200 rpm SATA 3.0Gb/s hard drive
    An AMD X6 Six Core computer running at 3.2 Ghz with 12 gigs of RAM and a single Samsung 7200 rpm SATA 3.0Gb/s hard drive
    Both computers were running the same version of the NVidia driver and all non-essential programs were disabled.
    When I test the 450 and the 480 in the AMD X4 system, they are turning in pretty much the same level of performance, in that system.
    The same holds true with the AMD X6, the 450 and 480 turn in virtually the same level of performance, in this system.
    The AMD X6 with either the 450 or 480 does turn in a better performance over the AMD X4 with either video card.
    The question.... Are you seeing result that are like this?  Where using the exact same computer, turns in the same results with different video cards.
    From the number of emails I get about the article, other have reported this to me also.  I have had a few people who said when they did see a minor speed increase when they did switch between a 450 and a 480 and a couple who did see a good speed increase.
    I am working on changing the article to reflect this and would really appreciate your input or Bills input on this. 
    I have looked at your benchmark chart and read through the result, but one thing that concerns me when reading some of the results is what programs do they have running in background, if any.  And how is that effecting their performance.  That is why I used the two systems I listed above to do the tests with.  It gives me a controlled enviroment to do test the performance of the video cards in.
    As a side note, when I tested the 450 and 480 cards in a friends Intel I7 system, again we didn't see any performance difference between the two video cards, but he did have some programs running in background which may have caused the perfornce results I got.
    Best Regards
    David Knarr

  • HCM workflow :can it be customized for new employee induction process?

    I understand that workflows can be customized to reflect complicated approval mechanisms.
    But can we link e-recruitment and training modules for a workflow on new employee induction training process??
    Appreciate any insights into related issues.

    HI Brunda ,
    you can do what ever u want with workflow. some topics which will help u
    1. identify the trigger point to start the workflow
    2. identify the tasks u want to perform in the induction process & create workflow steps for them
    3. if standard BUS object is not available then create a custom as per your requirement
    4. create custom workflow with the steps created
    now the trigger point can be assigned to the custom workflow
    Thanks & Regards

  • Suggestions for new stable system?

    So I am looking at getting the MSI Neo2-FIS2R, and have been reading through all the problems people are posting on this forum.
    I am not looking at doing any real overclocking just yet (I am fairly sure overclocking my old P2 eventually fried the board), but if things work out right, then maybe I'll look into it in the future.
    I was planning the following system:
    MSI Neo2-FIS2R
    Pentium 4 3.0C 800FSB
    1GB PC3200 Kingston mem kit (3-3-3)
    Seagate 80GB SATA (plus an old 40GB IDE)
    Sapphire ATI Radeon 9600 Pro Atlantis
    XP Home
    Antec True 380W PSU & case
    Should this be a stable system with good performance with this motherboard? Do I really need to go for better memory (Geil 1GB PC3500 kit and Corsair Twinx 3200 kits are options)?

    The numbers used by that program to determine the watts required are valid. You will get similar totals doing the exercise by hand.
    I don't know if anyone is making a large power supply that is not switch mode, but in either case efficiency is irrelevant in supplying power to the computer. It wants a certaing number of amps at a certain voltage, which will give you watts. If you need 400W you can use a big old iron power supply with 50% efficiency so that the computer gets 400W and the cooling air gets 400W, or you can get a switch mode supply with 70% efficiency that gives the computer 400W and the cooling air 170W.
    In either case the power supply watts rating is at the output, not at the input.
    The power supply rocks009 is looking at is marginal for his current configuration. I would expect that he has one or two optical drives not included here, maybe a few USB devices.
    This place  shows a price difference between the 380 and 480 of about $31 CDN, and the 550 of $48. CDN $ usually get divided by a big number when converting to another currency so the cost is marginal.
    You may be right jaeger66, but I'll put up my electrical engineering degree against yours )

  • Basic workflow for new CS3 project

    And thanks beforehand for your help !
    I'm going to start editing a video using CS3 on a Dell Inspiron 530.
    2.6 ghz dual core cpu
    3 gig ram
    1 sata HD - 130 gig free
    geforce 8800gt card
    This mousy computer is pretty well set up to get the most out of it.... re: indexing off, very little TSR and services related stuff running...
    However, I can't upgrade now and am painfully aware that this computer is going to be sorely taxed to edit a full length video ( 1.5 hours finished ).
    I should start getting the video in a week or so via FTP.  Those will be about 4 separate 12 gig files.  720x480i DV NTSC.
    I don't know if my computer will be able to handle this job but will try, and any suggestions on how to break this work up into manageable pieces for the timeline, and the workflow in general , would be appreciated ....thanks..

    For DV material this should not be a problem, but make sure you have at least 2 (e)SATA 7200 disks. One for media and one for your project/media cache and previews. You can use an XpressCard to SATA connection.

  • COMAC - COHV: manage object profile for order information system

    when you carry out an collective availability check from transaction COHV or COMAC, it is possible to select a layout or a profile. The layout can be defined within the transaction.
    What about the profile ? I can't find how to create a new profile in the  customizing for order information system.
    In standard the profiles are:
    000001 standard profile
    000002 pick list
    000003 collective availability check
    000004 documented goods movements
    Do you have any idea where the profiles can be maintained ?
    Many thanks

    Go to SPRO > Production >Shop Floor Control > Information System>Define Profile for Order Information System.
    Hope this helps

  • ADR3 table updation in new ECC system for customer address

    When ever customer is created using VAP1 transaction and maintain telephone and fax number it used to get update in ADR3 table.
    in new ECC system unless and until the telephone and fax is maintained in Business area of Contact person it is not getting updated in ADR3 table.
    Can u please let me know in which table it is getting saved if we are not maintaining these in business area in ECC?

    Sreedevi only fax number along with extension is getting updated in ADR3 but telephone number & extrnsion is getting updated in ADR2.
    Reward Points if it helps,

  • Integrating a custom toolchain in Eclipse for multiple host systems

    Hey guys
    I have a custom GCC toolchain that compiles binaries for my operating system project. I'm having problems with integrating this toolchain in Eclipse CDT to have proper preprocessing and error checking.
    On Windows, the toolchain resides in the Cygwin directory "C:/cygwin/ghost", and on other hosts it resides in "/ghost".
    I've tried to configure the project to use a "Cross compiler" toolchain and set the "Command to get compiler specs" under "C/C++ General -> Preprocessor Include... -> Providers -> CDT Cross GCC Built-in Compiler Settings" to use my compiler (namely i686-ghost-g++). This results in the include paths in my attachment being determined.
    Well, this is obviously correct for the compiler but does not work on Windows, because the compiler does not emit the "C:/cygwin" part of the path. Is there a way to define a prefix for these?
    Builder's environment:
    I'm using plain old bash scripts to build applications; on unix-like systems they run within the normal environment, but on Windows they must be run within the Cygwin environment (so the necessary tools are properly found).
    I tried setting the "C/C++ Build -> Builder Settings -> Build command" to sh to get my scripts used. This does not work with the Cross compiler toolchain setting, as they run in the Windows environment, not in the Cygwin environment. I can fix this by switching to the Cygwin toolchain configuration and setting the "C/C++ Build -> Environment -> PATH" variable properly, but this does not make sense as I also want to use the same project settings on non-Windows systems, too.
    How is it meant to be done? My goal is to have Eclipse automatically determine the include paths & therefore correctly preprocess sources; also being able to run my build scripts within the correct environment per system.
    If configuration is not suitable for this: Where can I find information on how to create a custom toolchain? With that it might be possible to implement it so that it automatically determines what environment to use on each system and how to determine include paths.
    Any help is greatly appreciated!

    In order to perform what your are trying to do in CC 5.2, you will need to go to configuration and setup a logical system, such as SAP R/3 and define all the appropriate systems for the logical system.  Then, when modifying the functions, you will need to set the tcode (action) to the logical system defined, such as R/3 or APO, etc. 
    The cross-system functionality only comes into play if you want to analyze the SOD where a conflict would occur if a user had access to one function in one system (for example - purchase order processing in APO) and a conflicting function in a different system (for example - Vendor Master in R/3). 
    If you simply want to check who has violates a risk against multiple system - the logical system is the best way.  You can have an logical system by system type - R/3, BW, APO, SRM, etc.
    To convert this over, you can export the rules and during the export you have to define the new system when exporting the file.  If that doesn't work, I'd just delete everything out, and use the upload files to reload the rules with the correct data.

  • Configuration Managment Pack for Non Oracle Systems (new)

    Hi ,
    There is a pack called "Configuration Management" for the database. This pack manage hardware , software , updates, patches, etc for host that have installed any Oracle Software.
    Now, in EM Release 2 there is a new pack "Configuration Managment Pack for Non Oracle Systems" wich basically will allow me to the same but without the requirement to have any Oracle software installed.
    The question is : Where can i find a white paper about it? i been looking around and there is only mentions of the product, but not extra info. I know is out already 3k p/processor..
    Any ideas?
    Sergio Benavides

    Found this dated Oct 2005
    (Note the "priced in Advance of Availability" piece)
    Standalone Managers
    Configuration Management Pack for Non-Oracle Systems (priced in Advance of Availability) 2.375 522,59 Per Processor -
    Provisioning Pack (priced in Advance of Availability) 2.375 522,59 Per Processor -
    Service Level Management Pack (priced in Advance of Availability) 79 17,42 Test -
    (Must license with Beacon Plus Test pricing) 2.375 522,59 Beacon -
    System Monitoring Plug-in for Hosts (priced in Advance of Availability) 1.188 261,29 Per Processor -
    System Monitoring Plug-in for Non Oracle Databases (priced in Advance of Availability) 1.188 261,29 Per Processor -
    System Monitoring Plug-in for Non Oracle Middleware (priced in Advance of Availability)
    25 1.188 261,29 Per Processor -
    System Monitoring Plug-in for Network Devices (priced in Advance of Availability)
    26 1.188 261,29 Per Network Device -
    System Monitoring Plug-in for Storage (priced in Advance of Availability)

Maybe you are looking for