Basic definitions and uses of EP,XI and BI

Hi All,
i am working on SAPEP and know what it can do.but a bit confused about other two netweaver technologies XI and BI.
1. What is XI generally used for?what skills required for that?
2. What is BI generally used for?what skills required for that?
How similar and difficult they are compared to EP.
Thanks in Advance
Rani A

Hi,
1. XI: stands for Exchange Infrastructure. If you have ever worked with middleware such as WebMethods Integration Server, IBM MQ Series, Tibco, etc, you can compare XI with these products. Its purpose is to act as a Hub connected to different systems (SAP and non-SAP). All participating systems send messages (such as Purchase Order documents) to XI, rather than directly sending to the receiver. XI contains message structure definition to validate correctness , receivers for this message, and what other adhoc changes to be applied to this message before relaying it to the receiver.
2. BI: Business Intelligence - purley used for reporting purposes. You do not carry out your transactions in a BI system. You use R/3 for that. Then you collect data into your BI system to report on it.
Imagine your employer wishes to run a media campaign to sell its newest product across the globe. It would require collecting data from all subsidiaries, and then manipulating it to identify purchasing patterns across each continent. Lets say people in Asia tend to spend a certain amount on a certain category of products in a certain timeframe. A BI system is built from scratch to support such analysis of data. You can compare SAP BI with the products from SAS, Teradata, SPSS etc.
So they have a totally different purpose than EP. The level of difficulty is dependent upon the complexity of landscape. Each area requires its own skillset.
Regards

Similar Messages

Basic MIB and SNMP understanding using JMX

Hello
i am trying to get my head around SNMP using JMX, but i am finding it dificult to know where to start.
ideally i would love to find some basic code and go through it, so that i can understand it.
i would love to find some code which just "Gets" one parameter from a mib stored on a seperate PC and displays it on another PC.
I have looked at advent - to complex for what i want.
Any help or suggestions - or possibly Code!! would be appreciated.
Thanks
Norman

There is an example code included in the upcoming book "JMX: Managing J2EE with Java Management Extensions" that shows how to retrieve a simple attribute value from an JMX SNMP Adaptor using the Sun JDMK and AdventNet SNMP toolkits. It's a brief introduction to SNMP integration but should get you started.
http://www.amazon.com/exec/obidos/ASIN/0672322889/104-6670791-7933546
Unfortunately you still have to wait a week or two to get it.
Basically the examples show how you can generate the required MBeans from an SNMP MIB definition (in Sun's JDMK this is a tool called MibGen), then register the SNMP Adaptor to the MBean server and associate and register the MBeans that were generated from the MIB to the adaptor. You can then use an SNMP client to connect to the adaptor and manipulate the MBeans through SNMP.
Hope this is of some help.
-- Juha

Using TREX for Material master for longtext (basic data) and classification

Hi together,
I am only having some basic know how about TREX.
We want to use TREX for quick search in Material master long texts (like basic data and so on) and also for searching in characteristic values of material master (tab: classification).
The TREX is successfull installed and It was possible for me to create an index for Material BUS1006001 in SES_ADMIN and search the material in this transaction by TREX. I also find the index in TREX_ADMIN "green".
But there I could only use the attributes of the standard business objects (for example describtion of material master = short text).
Now I want to use the long texts and the classification. What do I have to do in SES_ADMIN or somewhere else? Actually I only want to use the functionality in SAP GUI. If I know how to make the indixes I could program an own F4-Help for this in ABAP.
Can anybody help me?
Thanks a lot.
Florian

Hi Florian,
SES_ADMIN is the admin cockpit of the Search Engine Service (SES).
SES-based solutions usually include searching the long text. Just test!
SES-based solutions usually do not include searching via classification.
The successor framework of SES is "Embedded Search".
Embedded Search is available with NW 7.01, corresponding to ERP 6.04. For details see SAP note 1254901
Classification is supported by Embedded Search with NW 7.02, corresponding to ERP 6.05.
ERP 6.05 is in unrestricted availability since summer 2011.
If the customer can not upgrade to ERP 6.05, there is a preliminary SES-based solution for searching via classification.
The solution can only be provided via SAP PLM consulting.
Kind regards, Klaus Irle

External definition and used them as Data Type Templates

hi all
how to Develop external definition and used them as Data Type Templates .
Thank u
Swari

HI
External Definitions: If a definition of the message structure exists in wsdl, xsd, dtd formats, we can use it in the integration repository by importing it as an external definition.
External Definations:
An external definition enables you to import a local WSDL, XSD, or DTD file to the Integration Repository and specify which parts of the schema to extract as the description for a message. You can use these extracted message schema as:
Output or input messages in message interfaces
Source or target structures for message mappings
There is a series of standard schema for describing the message structure at runtime. WSDL (Web Service Description Language), XSD (XML Schema Definition Language), or DTDs (Document Type Definitions) are often used to describe message schema. If a description of the message structure already exists in one of the above formats, you can use it in the Integration Repository by importing it as an external definition rather than re-entering it manually using the data type editor.
Have a look at
http://help.sap.com/saphelp_nw04/helpdata/en/43/ce49ef1019087ae10000000a1553f6/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ba/d4c23b95c8466ce10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/26/9e97b0f525d743882936c2d6f375c7/content.htm
cheers

Definition and use of Warehouse Request and Warehouse Order in WM

Can any one please give me the definition and use of Warehouse Request and Warehouse Order in warehouse management?
Thanks in advance.
Regards,
Nagi Reddy

As per my understanding :
Warehouse request is similar to transfer of requirements.
Warehouse Order is similar to Transfer Orders.
If iam not wrong pls go through this...
Transfer Requirement Locate the document in its SAP Library structure
Definition
This is a document that serves to plan goods movements using the Warehouse Management System (WMS).
By differentiating between the planning and execution of a goods movement, you can recognize immediately whether a goods movement needs to be still executed (transfer requirement is open), is currently being executed (transfer order is created), or is completed ( transfer order is confirmed).
Use
On the one hand, transfer requirements are used to pass on information on goods movements that are posted in Inventory Management (MM-IM) to the Warehouse Management System (WMS). You can, however, also use transfer requirements for the following purposes:
    To initiate goods movements in WMS
    To initiate material replenishment for production storage bins in the production supply areas using the Production Planning (PP) component
    To call up transfer requirement reports in order to get an overview of all pending goods movements
On the basis of existing transfer requirements, the Warehouse Management System creates transfer orders, which, in turn, serve to execute the physical goods movements in the warehouse.
The system updates the transfer requirement:
    When you create, confirm or cancel a transfer order
    When you cancel a goods receipt or goods issue posting in Inventory Management (MM-IM) before the respective transfer order was generated in the Warehouse Management System (WMS).
In this case, the system automatically reduces the transfer requirement quantity by the quantity to be canceled, or it deletes the transfer requirement altogether if the entire requirement quantity is to be canceled.
Structure
A transfer requirement consists of a transfer requirement header with general information and one or several transfer requirement items with material information (see the section Creating Transfer Requirements).
The transfer requirement contains all the necessary information on a planned goods movement.
     What should be moved?
    Which quantity should be moved?
     When should it be moved?
The planning date is important for further automatic processing.
    Which transfer type is the basis of the goods movement?
Each goods movement in the warehouse is classified by a transfer type indicator. This key differentiates between:
                A stock putaway
                A stock pick
                A stock transfer
    Why is it to be moved?
Was the transfer order created as a result of a purchase order or a production order, or was it created manually?
Transfer Order
Definition
Document used for executing goods movements with the help of Warehouse Management (WM). Logical, physical goods movements or stock changes can be the basis for a transfer order. These include:
    Picks
    Putaways
    Posting changes
    Repacking
    Inventory
Use
As a rule, you create the transfer order with reference to a source document from WMS or other SAP application components. A source document can be a:
    Delivery document
    Tansfer requirement
    Material document
    Posting change notice
The transfer order contains all the information required to execute the physical transfer of materials into the warehouse, out of the warehouse, or from one storage bin to another storage bin within the warehouse. In addition, it is also used for executing logical stock transfers. Logical transfers of stock occur, for example, when goods are released from inspection and made available for general use. These logical transfers are called posting changes in WM.
When you confirm a transfer order, you inform the system that it has been processed and that the goods have arrived at the intended destination (see the section on confirming transfer orders). If the planned quantity (target quantity) differs from the actual quantity of stock that is moved, a difference quantity exists. If you confirm a transfer order with a difference, the difference quantity is automatically posted to an interim storage type for differences (see the section on stock differences).
Once they have been carried out, transfer orders also have a control and monitoring function since they document movements in the warehouse (see Warehouse Controlling).
For certain inventory methods (for example, zero stock check, inventory based on putaway), transfer orders serve as inventory documents. In this case, when the actual quantity is confirmed (after the first putaway into a storage bin), it is updated in the system as the inventory quantity.
Structure
A transfer order contains all the necessary information on a planned goods movement.
    What should be moved?
    Which quantity should be moved?
    Where should the bin be moved from (source storage bin), and where to (destination storage bin)?
The transfer order consists of a transfer order header with general information and one or several transfer order items with material information (see the section on creating transfer orders).
Transfer Order Header
The transfer order header contains the transfer order number and the date that it was created and confirmed. It also identifies the transfer requirement or delivery on which it is based as well as the movement type.
Transfer Order Item
A transfer order can have one or several items. The number of items contained in a transfer order depends on how many storage bins the system accesses in order to reach the total quantity of goods needed for the picking requirement or how many bins are needed to store the goods (putaway).
A transfer order item contains subsections that specify the direction of the goods movement for each item.
    Source storage bin
This subsection contains the source storage bin and the quantity of material that is being transferred. It indicates the storage bin from which goods are to be picked (goods issue) or an interim storage type (such as the goods receipt area) from which goods are taken to be put away in the warehouse.
    Destination storage bin
This subsection contains the quantity of material that is being transferred and the storage bin into which the goods are to be put away. For example, it may contain a storage bin in a high-rack storage area that has been selected for a stock putaway, or an interim storage type (the goods issue area) for a stock pick.
     Return storage bin
If, for example, you have the complete stock requirement set and you pick more stock than required from a storage bin, the system creates a subsection for the return storage bin. This can be the case, for example, when a complete pallet is removed from the shelf, but only a portion of the materials on the pallet is picked. In this case, the remaining quantity can either be returned to its original storage bin or transferred to another one.

Authorization for Basic dates and Forecast dates

Hello colleagues,
My customer requires is to have separate authorizations for using Basic dates and Forecast dates within WBS Element, Network and Milestone.
Iv'e noticed that the rellevant autorization object to have this separation is C_PROJ_TCD ; field: PSARG ; activity: 111 & 112. However I wonder if this is relevant to all related objects in the project or only to the Project definition object.
If the answer is only to PD I will be glad to have an idea how to controll it within the other objects .
Thanks in advance
Best Regards,
Nir
Edited by: Nir Horvitz on Nov 23, 2010 10:32 AM
Edited by: Nir Horvitz on Nov 23, 2010 10:41 AM

It is for all the objects... but you can not control it on basis of only that auth object.
For network,
use object :
C_AFKO_ACT
and activity 22 Display dates
for Project def and WBS, use
C_PROJ_KOK, C_PROJ_PRC, C_PROJ_VNR
C_PRPS_KOK, C_PRPR_PRC, C_PRPS_VNR
Regards,
Amol Sarode

Does FND_PROGRAM.delete_program remove data definition and templates?

I want to delete a concurrent program and all related records (including data definition and templates) from a development region. Does FND_PROGRAM.delete_program remove all records or will I end up with orphaned records? If records are left behind, which tables would I need to clean up?
Thanks for your help,
Tam.

Just use conditional tunnel mode.
Something like this:
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

Hi, I need help and advice. Basically me and my ex partner both had iphones and synced it with the same computer under the same ID. We split i have a new laptop and now it keeps asking for the old ID or it'll erase my apps bought on theold account.

Hi, I need help and advice. Basically me and my ex partner both had iphones and synced it with the same computer under the same ID. We split up and now im trying to get all my apps and info onto my new laptop with a new account but it keeps asking me for the old apple ID which she is still using and she changed the password. i tried backing it up but still nohing. When i try to back up purchased items being apps etc its keeps asking for the old one. help

See Recover your iTunes library from your iPod or iOS device. But you'll still need the password.
Once you have the computer authorized to use the account she could change the password again to stop you buying apps on her card (assuming it's not on yours!). It would lock you out of upgrading them too but they should work unless she uses the deathorize all feature.
It depends on how amicable the split is...
tt2

How to block reusage of archived Project definition and WBS element numbers

Dear All,
We have archived our projects using the TC SARA and the Project definition and WBS elements numbers no more exist in tables PROJ and PRPS etc.. When I now try to create a new project, the system proposes the next open number or allows to enter a number which is the same as one of the archived projects. But in our organization we cannot reuse the Project definition and WBS element numbers (even if it is archived) as a rule.
Can anybody guide me what are the possibilities to block or avoid the reusage of the numbers of archived project definition and WBS elements in a fool-proof way?
Thanks and regards

One Workaround:
Use T code OPSJ and lock the project coding mask. Doing this you can not use this mask any more.
But you want to continue using the mask but with different numbers. Not sure how this can be acheived. lets wait for others view
Regards
Sreenivas

Content type, list definition and List instance - query

Dear all,
I created a list content type, list definition and list instance for a SessionsList.
I did mistake when created a event receiver file where field name is RegistrationsInfo - did typo error as RegistrationInfo. This field I want to make it as false in the ShowInNewForm= false
When I deploy it with event receiver file - I am getting stack trace error stating that the RegistrationsInfo field is missing.
Without event receiver file - when I deploy the solution and checked the field name - it is showing rightly as RegistrationsInfo.
Content Type:-
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<Field ID="{7113CBE5-57E9-4082-A0A2-492B35B69C8D}" Type="Lookup" List="Lists/Courses-List" ShowField="Title" Name="CourseTitle" DisplayName="Courses - Title" Required="FALSE" Group="Training Site Columns"/>
<Field ID="{920AE6A7-2AAE-4E43-8855-7CBD9978EC5E}" Type="Lookup" List="Lists/SessionTrainer" ShowField="FullName" Name="Trainer" DisplayName="Trainer" Required="FALSE" Group="Training Site Columns"/>
<Field ID="{F73D9A96-3C86-4E33-96D5-31E30B08BF40}" Type="Choice" Name="TrainingVenue" DisplayName="Training Venue" Required="FALSE" Group="Training Site Columns">
<CHOICES>
<CHOICE>Kerala Meeting Room</CHOICE>
<CHOICE>Orissa Meeting Room</CHOICE>
<CHOICE>Bihar Meeting Room</CHOICE>
</CHOICES>
</Field>
<Field ID="{B6E9C8F5-F1BD-4D98-BD30-194504859ACC}" Type="Number" Decimals="0" Min="0" Name="RegistrationsInfo" DisplayName="Registrations Info" Required="FALSE" Group="Training Site Columns"/>
<Field ID="{03281B47-F1D1-477E-9793-3A19118720EE}" Type="Number" Decimals="0" Min="0" Name="TotalSeatsInfo" DisplayName="Total Seats Info" Required="FALSE" Group="Training Site Columns"/>
<Field ID="{8A900663-6351-445B-ACB3-394F44D45C8D}" Type="Calculated" ResultType="Number" ReadOnly="TRUE" Name="OpenSeatsInfo" DisplayName="Open Seats Info" Required="FALSE" Group="Training Site Columns">
<Formula>=TotalSeatsInfo-RegistrationsInfo</Formula>
<FieldRefs>
<FieldRef Name="TotalSeatsInfo" ID="{03281B47-F1D1-477E-9793-3A19118720EE}"/>
<FieldRef Name="RegistrationsInfo" ID="{B6E9C8F5-F1BD-4D98-BD30-194504859ACC}"/>
</FieldRefs>
</Field>

<ContentType ID="0x0100a9dc01b7e78b45799fe59153d97e2b9e"
Name="SessionList"
Group="Session Content Types"
Description="Session Content Type"
Inherits="TRUE"
Version="0">
<FieldRefs>
<FieldRef ID="{7113CBE5-57E9-4082-A0A2-492B35B69C8D}" Name="CourseTitle" DisplayName="Courses - Title" Required="TRUE"/>
<FieldRef ID="{920AE6A7-2AAE-4E43-8855-7CBD9978EC5E}" Name="Trainer" DisplayName="Trainer" Required="FALSE" />
<FieldRef ID="{F73D9A96-3C86-4E33-96D5-31E30B08BF40}" Name="TrainingVenue" DisplayName="Training Venue" Required="FALSE"/>
<FieldRef ID="{B6E9C8F5-F1BD-4D98-BD30-194504859ACC}" Name="RegistrationsInfo" DisplayName="Registrations Info" Required="FALSE"/>
<FieldRef ID="{03281B47-F1D1-477E-9793-3A19118720EE}" Name="TotalSeatsInfo" DisplayName="Total Seats Info" Required="FALSE"/>
<FieldRef ID="{8A900663-6351-445B-ACB3-394F44D45C8D}" Name="OpenSeatsInfo" DisplayName="Open Seats Info" Required="FALSE"/>
</FieldRefs>
</ContentType>
</Elements>
Schema:-
<?xml version="1.0" encoding="utf-8"?>
<List xmlns:ows="Microsoft SharePoint" Title="SessionList" FolderCreation="FALSE" Direction="$Resources:Direction;" Url="Lists/SessionList-LD-SessionList" BaseType="0" xmlns="http://schemas.microsoft.com/sharepoint/">
<MetaData>
<ContentTypes>
<ContentType ID="0x0100a9dc01b7e78b45799fe59153d97e2b9e" Name="SessionList" Group="Session Content Types" Description="Session Content Type" Inherits="TRUE" Version="0">
<FieldRefs>
<FieldRef ID="{7113CBE5-57E9-4082-A0A2-492B35B69C8D}" Name="CourseTitle" DisplayName="Courses - Title" Required="TRUE" />
<FieldRef ID="{920AE6A7-2AAE-4E43-8855-7CBD9978EC5E}" Name="Trainer" DisplayName="Trainer" Required="FALSE" />
<FieldRef ID="{F73D9A96-3C86-4E33-96D5-31E30B08BF40}" Name="TrainingVenue" DisplayName="Training Venue" Required="FALSE" />
<FieldRef ID="{B6E9C8F5-F1BD-4D98-BD30-194504859ACC}" Name="RegistrationsInfo" DisplayName="Registrations Info" Required="FALSE" />
<FieldRef ID="{03281B47-F1D1-477E-9793-3A19118720EE}" Name="TotalSeatsInfo" DisplayName="Total Seats Info" Required="FALSE" />
<FieldRef ID="{8A900663-6351-445B-ACB3-394F44D45C8D}" Name="OpenSeatsInfo" DisplayName="Open Seats Info" Required="FALSE" />
</FieldRefs>
</ContentType>
</ContentTypes>
<Fields>
<Field ID="{7113cbe5-57e9-4082-a0a2-492b35b69c8d}" Type="Lookup" List="Lists/Courses-List" ShowField="Title" Name="CourseTitle" DisplayName="Courses - Title" Required="FALSE" Group="Training Site Columns" />
<Field ID="{920ae6a7-2aae-4e43-8855-7cbd9978ec5e}" Type="Lookup" List="Lists/SessionTrainer" ShowField="FullName" Name="Trainer" DisplayName="Trainer" Required="FALSE" Group="Training Site Columns" />
<Field ID="{f73d9a96-3c86-4e33-96d5-31e30b08bf40}" Type="Choice" Name="TrainingVenue" DisplayName="Training Venue" Required="FALSE" Group="Training Site Columns">
<CHOICES>
<CHOICE>Kerala Meeting Room</CHOICE>
<CHOICE>Orissa Meeting Room</CHOICE>
<CHOICE>Bihar Meeting Room</CHOICE>
</CHOICES>
</Field>
<Field ID="{b6e9c8f5-f1bd-4d98-bd30-194504859acc}" Type="Number" Decimals="0" Min="0" Name="RegistrationsInfo" DisplayName="Registrations Info" Required="FALSE" Group="Training Site Columns" />
<Field ID="{03281b47-f1d1-477e-9793-3a19118720ee}" Type="Number" Decimals="0" Min="0" Name="TotalSeatsInfo" DisplayName="Total Seats Info" Required="FALSE" Group="Training Site Columns" />
<Field ID="{8a900663-6351-445b-acb3-394f44d45c8d}" Type="Calculated" ResultType="Number" ReadOnly="TRUE" Name="OpenSeatsInfo" DisplayName="Open Seats Info" Required="FALSE" Group="Training Site Columns">
<Formula>=TotalSeatsInfo-RegistrationsInfo</Formula>
<FieldRefs>
<FieldRef Name="TotalSeatsInfo" ID="{03281B47-F1D1-477E-9793-3A19118720EE}" />
<FieldRef Name="RegistrationsInfo" ID="{B6E9C8F5-F1BD-4D98-BD30-194504859ACC}" />
</FieldRefs>
</Field>
</Fields>
<Views>
<View BaseViewID="0" Type="HTML" MobileView="TRUE" TabularView="FALSE">
<Toolbar Type="Standard" />
<XslLink Default="TRUE">main.xsl</XslLink>
<RowLimit Paged="TRUE">30</RowLimit>
<ViewFields>
<FieldRef Name="LinkTitleNoMenu">
</FieldRef>
<FieldRef Name="CourseTitle"></FieldRef>
<FieldRef Name="Trainer"></FieldRef>
<FieldRef Name="TrainingVenue"></FieldRef>
<FieldRef Name="RegistrationsInfo"></FieldRef>
<FieldRef Name="TotalSeatsInfo"></FieldRef>
<FieldRef Name="OpenSeatsInfo"></FieldRef>
</ViewFields>
<Query>
<OrderBy>
<FieldRef Name="Modified" Ascending="FALSE">
</FieldRef>
</OrderBy>
</Query>
<ParameterBindings>
<ParameterBinding Name="AddNewAnnouncement" Location="Resource(wss,addnewitem)" />
<ParameterBinding Name="NoAnnouncements" Location="Resource(wss,noXinviewofY_LIST)" />
<ParameterBinding Name="NoAnnouncementsHowTo" Location="Resource(wss,noXinviewofY_ONET_HOME)" />
</ParameterBindings>
</View>
<View BaseViewID="1" Type="HTML" WebPartZoneID="Main" DisplayName="$Resources:core,objectiv_schema_mwsidcamlidC24;" DefaultView="TRUE" MobileView="TRUE" MobileDefaultView="TRUE" SetupPath="pages\viewpage.aspx" ImageUrl="/_layouts/images/generic.png" Url="AllItems.aspx">
<Toolbar Type="Standard" />
<XslLink Default="TRUE">main.xsl</XslLink>
<RowLimit Paged="TRUE">30</RowLimit>
<ViewFields>
<FieldRef Name="Attachments">
</FieldRef>
<FieldRef Name="LinkTitle">
</FieldRef>
<FieldRef Name="CourseTitle"></FieldRef>
<FieldRef Name="Trainer"></FieldRef>
<FieldRef Name="TrainingVenue"></FieldRef>
<FieldRef Name="RegistrationsInfo"></FieldRef>
<FieldRef Name="TotalSeatsInfo"></FieldRef>
<FieldRef Name="OpenSeatsInfo"></FieldRef>
</ViewFields>
<Query>
<OrderBy>
<FieldRef Name="ID">
</FieldRef>
</OrderBy>
</Query>
<ParameterBindings>
<ParameterBinding Name="NoAnnouncements" Location="Resource(wss,noXinviewofY_LIST)" />
<ParameterBinding Name="NoAnnouncementsHowTo" Location="Resource(wss,noXinviewofY_DEFAULT)" />
</ParameterBindings>
</View>
</Views>
<Forms>
<Form Type="DisplayForm" Url="DispForm.aspx" SetupPath="pages\form.aspx" WebPartZoneID="Main" />
<Form Type="EditForm" Url="EditForm.aspx" SetupPath="pages\form.aspx" WebPartZoneID="Main" />
<Form Type="NewForm" Url="NewForm.aspx" SetupPath="pages\form.aspx" WebPartZoneID="Main" />
</Forms>
</MetaData>
</List>
Event Receiver file:-
public override void FeatureActivated(SPFeatureReceiverProperties properties)
//Reference the newly created session list and perform the following
//1. Set the display name of the "Title" column to "SessID" and hide it from the New and Edit Forms
//2. Make the "SessID" column not required
//3. Set the default value of the RegistrationsInfo column to 0 and do not display it on the new form
//4. Add the built-in "Start Date" and "End Date" columns
//Reference the newly created session list
SPWeb currentWeb = properties.Feature.Parent as SPWeb;
//currentWeb.AllowUnsafeUpdates = true;
SPList sessionList = currentWeb.Lists["SessionList"];
//Title column update
SPField titleField = sessionList.Fields["Title"];
titleField.Required = false;
titleField.ShowInNewForm = false;
titleField.ShowInEditForm = false;
titleField.Title = "SessID";
titleField.Update();
//RegistrationsInfo column updates
SPField registrationField = sessionList.Fields["RegistrationsInfo"];
registrationField.DefaultValue = "0";
registrationField.ShowInNewForm = false;
registrationField.Update();
//Add the Start Date and End Date columns to the list, ensure they both display Date and Time, and add them to the default view of the list
SPFieldDateTime startDate = currentWeb.Fields["Starting_Date"] as SPFieldDateTime;
startDate.DisplayFormat = SPDateTimeFieldFormatType.DateTime;
SPFieldDateTime endDate = currentWeb.Fields["Ending_Date"] as SPFieldDateTime;
endDate.DisplayFormat = SPDateTimeFieldFormatType.DateTime;
sessionList.Fields.Add(startDate);
sessionList.Fields.Add(endDate);
SPView defaultView = sessionList.DefaultView;
defaultView.ViewFields.Add(startDate);
defaultView.ViewFields.Add(endDate);
defaultView.Update();
sessionList.Update();
//currentWeb.AllowUnsafeUpdates = false;
Can somebody help me - how to overcome the RegistrationsInfo missing field - error(in the stack trace) when activating the feature in the training site?
Thanks
Sathya

Hi Sathya,
Seems the field “RegistrationsInfo” is not been found when deploying with Event Receiver, a possible reason is that it might be damaged.
As a workaround, I suggest you retract the solution from your farm, make sure the “RegistrationsInfo” field is deleted using PowerShell, then create another project with the same
content and perform the deployment again.
About how to delete a field using PowerShell for your reference:
https://peterheibrink.wordpress.com/2011/12/09/powershell-delete-field-and-all-references/
http://www.sharepointfix.com/2011/04/powershell-script-to-delete-site.html
Feel free to reply if there any progress.
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Creation of project definition and wbs element

I want creation of project definition and wbs element upto 4 level using bapis.
i am using transaction cj27,cj01,cj02
which function module to use for this??

Hi,
to create project definition with customer fields the BAPI you should use is : BAPI_BUS2001_CREATE
to create WBS elements with different levels and specific fields the BAPI you should use is BAPI_BUS2054_CREATE_MULTI
these bapi must be used in the sequence of call :
BAPI_PS_INITIALIZATION
BAPI_BUS2001_CREATE / BAPI_BUS2054_CREATE_MULTI
BAPI_PS_PRECOMMIT
BAPI_TRANSACTION_COMMIT
before using the bapi, you must apply OSS note :
637345 - Syntax error with enhanced PS tables
i sent you the oss note to your mail
please reward points if helpfull.

Difference between Basic Component and Standard Component

Hi Iam just learning JSF, at the same time I try to learn to use Sun Java Studio Creator at the same time. May I know what is the difference between the Basic component and the Standard component in the IDE.
I have been using the Grid Panel, each time I need a header I manually t ype
<f:facet name="header">
</f:facet>
in the JSP source code. How can I do this visually?
Thanks,
james

The Standard section in the Palette contains the JavaServer Faces reference implementation components. The IDE provides the standard components for backwards compatibility with projects that were built with earlier versions of the IDE. Because the standard components provide less functionality and require more programming, you should use the visual components from the other Palette sections.
I do not know the answer to your second question.
Chris

What kind of mac would I need for Nexflix, basic search and email? Also, sounds silly, but can I connect an HDMI from Mac to tv?

What kind of mac would I need for Nexflix, basic search and email? Also, sounds silly, but can I connect an HDMI from Mac to tv?

Just an FYI. The Macs named PowerMac date from early 2006 and before. Use this tip to discover where to post once you get your Mac:
Site map of Communities and Categories
The cheapest Mac available new is a Mac Mini. It is no bigger than many an external hard drive. But the screen and keyboard and mouse must be purchased separately. They support USB and Bluetooth keyboards and mice, and pretty much any DVI, HDMI, or displayport display. Although the iMac is certainly an attractive option if all you want to deal with is deciding on a printer. I still recommend getting an Apple USB keyboard for the occasional times you may need to troubleshoot startup issues. Normally not a problem, but as it gets older some issues can be fixed at startup or diagnosed at startup.

Cell Definition and Reverse sign Issue after upgrade

Hi ,
we are having a issue here after upgrade to BI 7 from 3.1c .
There is a Collision between Cell Definition and Reverse sign in the query designer.
Issue is . We have Key Figure "Net Days AR" which has Reverse Sign Checked under properties. In 3.1c when we ran the report the Net Days AR would get value like for example -40 . but now after upgrade to BI 7 SP 16 we are getting value 40. the negative sign is missing. The formula is correct.
I went and checkd if we have any cell definitions defined on this and found the cell definitions onthis keyfigure.
values are comming correct if there are no cell definitions.
Thanks in Advance and Points will be awarded.
Thanks,
Reddy

we have the same problem. In BI 2004s with BEx 3.x when the cell reference is defined, the reverse sign flag is ignored.
I opened a message to SAP. Until now no solution and I think we'll never receive solution. Here are the answers we received:
SAP
I have to say this is the limitation of front end 3.5.
In designer 3.5, it works this way:
When you define a cell referance, this cell is blocked from change of the column property change. No matter how you change the column key fig proerty, it keeps the original status when you define it.
If you want the defined cell property, you need to delete the cell
referance, change property, then redefine the referance.
I agree this is very inconvinience, that's why I would recommend you to use query designer 7.0 if possible. With 7.0 front end, you can define separately the property for defined cells. It is more flexible.
ME
At the moment it is not possible to migrate to 7.0 frontend.
I tried to delete the cell reference, change properties and redefine the reference. I tried to create new columns, define cell properties, save and define the cell reference. I tried several different combinations...
No way, as soon as I define the cell reference, column properties are ignored.
1) How can we restore the correct behavour of a query in frontend 3.5?
2) If we found a way to restore it, we need a smart procedure to modify all our existing queries (including how to identify those affected by this inconvenience).
SAP
For front end 3.5, you need do following:
1. delete cell referance
2. change the column property (such as tick on or off the sign reversal)
3. re-define the cell (this cell will with the new sign status)
4. define formular base on cell
After step 3, you can't change cell property whatever you do in
column property. This is the designed behavior.
If you want to change property after step 3, you need to start
all over from step 1.
ME
I did it.
Don't work. When I define the cell reference, column properties are ignored.
SAP
It seems there is some issue in front end.
Do you use the front end 3.5 with latest patch?
Could you please check front end installation as per sapbexc.xla (described in note 197460). If there are problems shown within this check do the following:
- Remove your frontend via 'START' - 'PROGRAMS' - 'SAP FRONTEND' -'REMOVE SAP FRONTEND'
- Install the lastest frontend and GUI patch (according to note 496977or 496989 again and check the installation).
ME
I don't think so. I am using:
Sapgui 7.10 Patch 8
Bex 3.50 Patch 3
Bex 7.x Patch 5
to be continued...

IDOCS: Segment Definition and Segment Type

Hi Gurus,
We are working on IDOCs and trying to send a Location Master IDOCs to Third party system.
1. In the IDOC print preview we are in a position to see the IDOC segment type Ex: E1TPLOC but customer is asking for Segment definition E2TPLOC.
When we go through the documentation:
u2022     Segment Type consists of Segment definition with Version and Release.
u2022     Segment Definition will contain the Field names
u2022     E1TPLOC, E1TPDLH, E1KNVAM, E1TPTRM & E1TPSHH Segment types with concerned Segment definitions are
                     E2TPLOC,E2TPDLH, E2KNVAM
How to see the Segment definition types?

Hi,
You can see the documentation in the transaction WE60 by giving the IDOC Basic type and extension if you have any.
E1 and E2 are the same, when you see the definition of the segment the naming convention will be E2 and when populating the data it will be E1.
I believe he is asking the segment definition alone, you go to WE60 transaction and give the inputs and click the parser button and that will give you the definition of the idoc and which you can share it with your partner.
Thanks,
Mahesh.

Basic definitions and uses of EP,XI and BI

Similar Messages

Maybe you are looking for