Basic question on J2EE 1.4.03 version

Hi,
I had just install this version of J2EE 1.4.03, after that i had set the path and start up the default server.After the start up was completed, i load the page from explorer, but the loading seem took infinite time to finish it.The page cannot be loaded. Anyone know the problem? thank

Search the logs.

Similar Messages

Basic question; compatability of Win XP oem version with Parallels on mac

I am very new to this, being a recent win to mac convert so please excuse.
I have ordered a new Imac 24 and I need to use a few of my old windows programs on it. I understand the use of parallel and boot camp.
my question; I would like to purchase the OEM version of Win XP as it is less expensive than the full boxed version.
Will it work on the boot camp and Parallel programs and allow me to boot up win XP on my new mac and use the windows based Dragon Naturally speaking program.???
thanks in advance for your anticipated response.

Yes

J2ee Connector basic questions

          Hi all,
          I have a few basic questions about j2ee technology and legacy systems.
          In the past year I have used Bea Jolt to "talk" with Tuxedo legacy code,now I
          read about weblogic j2ee Connector and I have the following question: they are
          2 technology in competition, or they can be collaborative ? I mean If I want to
          "talk" to legacy system I can choose between:
          1) "portable" solution (so I keep j2ee Connector)
          2) Vendor tecnology (Bea Jolt or Tuxedo connector)
          Please correct me if I'm wrong...I'm a bit confused on this topic....
          Thanks
          Francesco


Hello folks, please share your experience working with the lotus notes connector.
Thanks, M

Possibly a very basic question but I have set up a spread sheet in Numbers and have viewed help videos but I can't get it to give me sums for the columns I highlight. Keeps coming up with the figure zero. I have version 09 2.3(554). Can anyone help

Possibly a very basic question but I am going nowhere without a solution. I have set up a spreadsheet in Numbers but it won't give me sums for chosen columns. I have viewed the run through videos and used the formula but nothing happens apart from giving a figure of zero or a red arrow. The sum icon in the bottom left hand section of the window does not highlight or show any total as I understand from the video that you can drag whatever total is here onto the relevent position on your spreadsheet. I have Numbers 09 version 2.3 (554). Can anyone advise. Thanks.

Hi Sohojools,
To sum a column, use a formula such as this one in Cell A6
Type this in a cell below your data:
=SUM(A2:A4) or whatever range of cells you want to sum. The easy way is to type:
=SUM(
and then drag or shift-click to select the range of cells. Close the formula with a final bracket ")".
The sum icon in the bottom left hand section of the window does not highlight or show any total
To see the sum (and other simple statistics) in the bottom left, select a range of cells. That tells Numbers which cells you are refering to.
The videos are good, but the Numbers'09 User guide, and the Formulas and Functions User Guide are better. Download them from the Help Menu in Numbers.
Regards,
Ian.

OC4J 9.0.4 stand alone - basic questions

Hi,
I'm upgrading my web applications from OC4J (1.0.2.2) to OC4J 9.0.4.
I have a few basic questions. Since I asked these as part of another thread and didn't get a response, I thought starting a new thread might help...
1. Does the JSP compiler in OC4J 9.0.4 (JSP container) work with the JDK version set in the path ? (I'm not using OJSP).
2. I read that OC4J 9.0.4 is J2EE 1.3 compliant. With OC4J 1.0.2.2 , I used the j2ee.jar file (that was bundled with J2SDKEE 1.3) to compile my Servlets/Struts code. I copied it into the OC4J_HOME directory and set the Classpath to it, to build my classes.
With 9.0.4, can I still use this j2ee.jar file or do I need to use the jar files (Servlet.jar) in the OC4J_HOME/lib directory?
3. Could somebody throw some light on why some jar files are placed in OC4J_HOME while others are in the OC4J_HOME/lib directory ? What is the difference?
Any help/suggestions will be greatly appreciated.
Thanks,
Shyam

Hi, shyam:
It is nice to raise different questions in different threads.
1. Does the JSP compiler in OC4J 9.0.4 (JSP container) work with the JDK version set
in the path ? (I'm not using OJSP).I believe you are referring to the runtime JSP engine, which compiles your JSP when you first access it. The answer is yes.
To see the compilation setting when oracle jsp engine is compiling jsp files, start oc4j with the debug flag:
java -Dbuild.debug=true -jar oc4j.jar
2. I read that OC4J 9.0.4 is J2EE 1.3 compliant. With OC4J 1.0.2.2 , I used the
j2ee.jar file (that was bundled with J2SDKEE 1.3) to compile my Servlets/Struts code.
I copied it into the OC4J_HOME directory and set the Classpath to it, to build my
classes. With 9.0.4, can I still use this j2ee.jar file or do I need to use the jar files
(Servlet.jar) in the OC4J_HOME/lib directory?Not sure what to say about j2ee.jar of j2SDKEE1.3 since I have never used it. For Servlet code, they are pure java code as long as you use the right libraries. Use the one in OC4J_HOME/lib if possible, although it probably does not matter much. For JSP file, there is no problem of compilation if you do not want to precompile them. All you need is packaging them and deploying them.
3. Could somebody throw some light on why some jar files are placed in OC4J_HOME
while others are in the OC4J_HOME/lib directory ? What is the difference?The executable jars are in OC4J_HOME directory. Besides that, I do not see see much difference.

Basic question on Adobe document services

Hi
We have a ECC50 instance - the basis component of which has been given to us from our headquarters that has stripped off the J2EE server ( i.e given a WAS640 with just the ABAP runtime installed ).
Now, we are planning to use Adobe Interactive forms - for simple applications - like our field sales able to create a sales order by entering data -offline and submitting it to our ECC50 box.
Now, question is - the ADS - that provides runtime services - does it need a J2EE server - or can I assume that this version of our ECC50 has ADS installed on the ABAP stack - and we still go ahead and plan using Adobe Interactive Services assuming that ADS ( PDF document object )would be available to our ABAP environment to process a PDF form that comes in from field sales ?
Thanks in advance for answering this very basic question.

Hello Karthik,
the ADS only runs on the Java stack, so yes you will need to have SAP Web AS Java installed to deploy and run Interactive Forms.
The functionality of ADS can then be accessed both from Java and ABAP applications.
Cheers,
Matthias

Basic question regarding SSIS 2010 Package where source is Microsoft Excel 97-2005 and there is no Microsoft office or Excel driver installed in Production

Hi all,
I got one basic question regarding SSIS 2010 Package where source is Microsoft Excel 97-2005. I wanted to know How this package works in production where there is no Microsoft office or Excel driver installed. To check that there is excel driver installed
or not, I followed steps: Start-->Administrative Tools--> Data Sources(ODBC)-->Drivers and I found only 2 drivers one is SQL Server and another one is SQL Server Native Client 11.0.
Windows edition is Windows Server 2008 R2 Enterprise, Service Pack-1 and System type is 64-bit Operating System.
We are running this package from SQL Server Agent and using 32-bit (\\Machine_Name\d$\Program Files (x86)\Microsoft SQL Server\110\DTS\Binn\DTExec.exe /FILE "\\Machine_Name\d$\ Folder_Name\EtL.dtsx" /CONFIGFILE "\\Machine_Name\d$\Folder_Name\Config.dtsConfig"
/MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E) to run this package. I opened the package and tried to find out what connection we have used and found that we have used "Excel Connection Manager" and ConnectionString=Provider=Microsoft.Jet.OLEDB.4.0;Data
Source=F:\Fares.xls;Extended Properties="EXCEL 8.0;HDR=YES"; and source is ‘Excel Source’
I discussed with my DBA and He said that SSIS is having inbuilt Excel driver but I am not convinced.
Could anyone please clear my confusion/doubt?
I have gone through various links but my doubt is still not clear.
Quick Reference:
SSIS in 32- and 64-bits
http://toddmcdermid.blogspot.com.au/2009/10/quick-reference-ssis-in-32-and-64-bits.html
Why do I get "product level is insufficient..." error when I run my SSIS package?
http://blogs.msdn.com/b/michen/archive/2006/11/11/ssis-product-level-is-insufficient.aspx
How to run SSIS Packages using 32-bit drivers on 64-bit machine
http://help.pragmaticworks.com/dtsxchange/scr/FAQ%20-%20How%20to%20run%20SSIS%20Packages%20using%2032bit%20drivers%20on%2064bit%20machine.htm
Troubleshooting OLE DB Provider Microsoft.ACE.OLEDB.12.0 is not registered Error when importing data from an Excel 2007 file to SQL Server 2008
http://www.mytechmantra.com/LearnSQLServer/Troubleshoot_OLE_DB_Provider_Error_P1.html
How Can I Get a List of the ODBC Drivers that are Installed on a Computer?
http://blogs.technet.com/b/heyscriptingguy/archive/2005/07/07/how-can-i-get-a-list-of-the-odbc-drivers-that-are-installed-on-a-computer.aspx
Thanks Shiven:) If Answer is Helpful, Please Vote

Hi S Kumar Dubey,
In SSIS, the Excel Source and Excel Destination natively use the Microsoft Jet 4.0 OLE DB Provider which is installed by SQL Server. The Microsoft Jet 4.0 OLE DB Provider deals with .xls files created by Excel 97-2003. To deal with .xlsx files created by
Excel 2007, we need the Microsoft ACE OLEDB Provider. SQL Server doesn’t install the Microsoft ACE OLEDB Provider, to get it we can install the
2007 Office System Driver: Data Connectivity Components or
Microsoft Access Database Engine 2010 Redistributable or Microsoft Office suit.
The drivers listed in the ODBC Data Source Administrator are ODBC drivers not OLEDB drivers, therefore, the Excel Source/Destination in SSIS won’t use the ODBC driver for Excel listed in it by default. On a 64-bit Windows platform, there are two versions
of ODBC Data Source Administrator. The 64-bit ODBC Data Source Administrator is C:\Windows\System32\odbcad32.exe, while the 32-bit one is C:\Windows\SysWOW64\odbcad32.exe. The original 32-bit and 64-bit ODBC drivers are installed by the Windows operating system.
By default, there are multiple 32-bit ODBC drivers and fewer 64-bit ODBC drivers installed on a 64-bit platform. To get more ODBC drivers, we can install the 2007 Office System Driver: Data Connectivity Components or Microsoft Access Database Engine 2010 Redistributable.
Besides, please note that 2007 Office System Driver: Data Connectivity Components only install 32-bit ODBC and OLEDB drivers because it only has 32-bit version, but the Microsoft Access Database Engine 2010 Redistributable has both 32- bit version and 64-bit
version.
If you have any questions, please feel free to ask.
Regards,
Mike Yin
TechNet Community Support

Basic questions with respect to ABAP WebDynpro Application

Hi All,
I have two basic questions with respect to an ABAP WebDynpro application :
a) If an ABAP WebDynpro application has been developed, how could it be made available to the end user?
b) Can an ABAP WebDynpro application be developed in ECC or is it only applicable for version 4.6c?
Thanks & Regards,
Sushanth Hulkod

Sushanth Hulkod wrote:
> a) If an ABAP WebDynpro application has been developed, how could it be made available to the end user?
>
> b) Can an ABAP WebDynpro application be developed in ECC or is it only applicable for version 4.6c?
a) If an ABAP WebDynpro application has been developed, how could it be made available to the end user?
Answer - By providing direct link of the WD application created in SE80, creating iView for webdynpro abap application in the portal environment and NWBC environment
b) Can an ABAP WebDynpro application be developed in ECC or is it only applicable for version 4.6c?
Answer - Yes it can be developed in ECC. Webdynpro ABAP is introduced in NW 2004s (SAP NetWeaver 7.0 or ECC 6.0)
Thanks,
Chandra

Basic Questions of ABAP programming

Hi Experts
I am new for ABAP programming. I wants to know some basic about ABAP. I have done 2 months ABAP course from a institute. They give me training on 4.7 IDES ver. Please give the answers of following questions.
1.Is there big difference between 4.7 and 6.0 Ecc ver in ABAP programming point of view?
2.for Traing purpose Should I install the full verson of SAP or there is any dummy software?
3.SAP Netweaver knowledge is must for ABAP programing?
4. When we install SAP 4.7 IDES version then all the modules will avialable or Only ABAP?
Thanks
Best Regards
Jitender

Hello,
For your own practice you can download the free version of SAP Netweaver ABAP in the downloads section of SCN. This is only for ABAP development. You wont find many of the stadard tables and functionalities with in it. IDES should be containing all the modules. But again that depends on the licesnse with which you are provided.
Your questions have no relevance from the ABAP technical point of view except the first one which is a basic question and should be asked here as per the forum rules. Thats the reason why you were suggested to read the forum rules.
For any queries of the trial version ABAP have a look at this forum
Vikranth

Basic questions from techie thicko with 'new' G4

I've looked but can't find the answers to these basic questions.
My new (reconditioned) computer as below came with just the operating systems and something called 'Cloner' plus some Utilities.
A) What is the best way to switch between OSX and Classic?
(It defaults to X on start-up and I can get to X from Classic by re-starting pressing 'x'. If that's the right way to do it, what is the approved way of getting into Classic?)
B) I'm not sure (after reading about it!) what I can do with Cloner and how.
C) I have AppleWorks on OS9. Can I update this for OSX? Failing this, is there a Software Download that will give me a basic DTP facility until I can afford to buy an advanced programme? I also have Pagemaker 7 in Classic.
D) I have been transferring stuff to Classic from my iMac DV 9.2.2 with my card reader and this seems to work well. Anything to watch out for?
There's more but I can't impose on members' kindness too much!
For future reference, is it possible to post pictures on these boards and if so how please? I have Photoshop and hosting sites.
Sorry to be a pain but I really am an idiot about techie stuff.
Thanks for any help.

I'm not sure what Cloner does. It sounds as if it may clone the hard drive, a bit like Carbon Copy Cloner:
http://www.bombich.com/software/ccc.html
I'm wondering whether it was just used to put the operating systems and utilites onto the drive in the first place when they reconditioned the computer. Perhaps they use a 'master' drive and just clone it to the drives in the computers they're reconditioning, rather than installing everything separately and repeatedly.
I think version 6 of AppleWorks runs under both OS 9 and OS X natively. If you have an earlier version, I'm not sure whether it's a free downloadable upgrade or whether you have to pay for it.
I'm sure the card reader works fine, although you could network the two computers together with an ethernet cable and create a small network. With two computers you just need a crossover cable to create a crossover network:
http://docs.info.apple.com/article.html?artnum=106658
If you're thinking of keeping your iMac, that may be a better long term solution. You could then use the iMac as your OS 9 machine and the PowerMac as your OS X machine if you wanted to.

Basic Questions (Compressor/Qmaster)

I can't find answers to some really basic questions:
1. To distribute Compressor tasks, is Qmaster and Compressor required on all participating Macs?
2. Are they required to be exactly the same version across the participating Macs?
3. Are they required to have unique serial numbers? (I tried to start Compressor on a second Mac that had been installed from FCS 5.1 Crossgrade package that resides on original Mac - all that was on the second Mac was Compressor and Qmaster - Qmaster didn't seem to mind, but Compressor gave me a warning message and terminated....)
4. Assuming the above issues have been resolved as required, does Compressor have to be started on the "Services Only" Mac in order to assist in the processing?
Again, my apologies for the level of these questions....
Stan

1. No - just use the Qmaster node installer (In the extras folder of Final Cut Studio install disc).
2. Yes - same versions of Qmaster
3. The nodes don't require a serial number.
4. No - just turn on Services in the Apple Qmaster panel of System Prefs. On the nodes, check Share and Managed and click the "Start Services" button. Set up the Nodes as Services only and your Controller (the machine with Compressor installed) as Services and cluster controller. Then use Qadmin to set up the cluster.

Basic questions. Accessing documents

Hello,
I have few very basic questions. I don't see an obvious way to access documents from within any CS6 app. Is this something that should be possible, or do files have to be uploaded/downloaded from the browser interface? I downloaded and installed trial versions of the Master Collection. When CS6 became available, it seemed to know I was a member because it no longer prompts me to "continue trial." However, several apps show as not installed in the download manager accessable from within CC.
Also, what does the subscription include as far as website publishing. Five sites is what the literature says. Is this five trial sites. I have a site I setup as a test. It's accessable through xxxx.businesscatalyst.com, but when I click "push to live" I am promoted to choose a monthly plan. I really don't need the service, but just curious what level is included.
Also, also, while I can access the creative cloud and it shows 20gb and all apps, my account shows nothing about being a Creative Cloud member.
Sorry for these basic questions.
-Hugh

Hi David,
Getting a lot of email time with you. Thank you for being helpful. I have one Adobe ID. Answers to your questions below:
For accessing documents within the CS6 apps, you could go through cloud storage if you wanted to transfer between locations or computers but saving your work to the computers HD is the same as past versions.
OK, I must be dense. I don't see an obvious way to transfer. Don't need a full tutorial, just point me to a menu item or window tab or anyplace. I'll figure it out from there.
I haven't tested using the Master Collection myself but I would be curious if you launch one of the products which show as not installed within the Adobe Application Manager window does it show as being a trial still? Does just launching make any difference?
No, the apps launch without the 30-day trial notice. Everything seems to be working normally except for not showing as installed through the CC site.
I did install the Master Collection trial Thursday night expecting the launch of CC to be delayed or on California time (East Coast here). Launched a few apps before discovering access (actually a little before midnight--good job). It seems the apps I launched before the service went live are the apps that display as not installed. But not 100-percent sure.
For the website question, I was wondering if it might be because you weren't signed in to Muse with your Adobe ID, it should be the same one as Creative Cloud.
I was promoted to login at the Business Catalyst site from the "manage" link in CC (same with typekit--every time I access)--same (and only) Adobe ID I have. I was also logged in through Muse. I'm sure of that.
Did you receive an email saying that your subscription service was activated? Are you logged into the Creative Cloud website with the same Adobe ID? It almost sounds like you are not signed in or the subscription is not activated?
Other than a few phone calls and online chats with folks at Adobe, this forum is the only (semi) official notification I've recieved. When I called the Customer Service number, the rep told me it would automatically convert (which it seems to have done since I can access and download). But the rep (nore online chat sessions) ask for my Adobe ID.
I checked my spam folder, etc., to make sure nothing was missed from Adobe. Nothing received. As an FYI, I did get the auto notice telling me I was charged for the monthly Design Premium 5.5 subscription on May 10 (just like clockwork).
Also try clearing your browser cache, closing and reopening the browser, oddly enough I've heard that can make a difference in some cases.
I'll try that. Also read elsewhere that uninstalling and reinstalling has helped with other issues. Also read about deleting config files to cause CS6 to reset. Haven't tried it. Would like to know my subsciption status first.
OK, so another basic question, How do I activate my subscription. Call customer service again? Some place on the website? Friends at Adobe ;-)
Thanks much.
-Hugh
BTW, I'm very happy with CS6 so far. Being super productive since Friday night. Not getting much sleep, but having a lot of fun learning/developing some pretty cool stuff.

Basic Questions from Prospective Lion Server Switcher

I have five servers I am running right now using Windows 2003 Server and various 3rd party packages.     Several years ago I became a Mac fan, moved all of my client based stuff to Mac, and now want to start moving my server based equipment to the OSX platform.
I stopped by my local Apple Store, and they had a version of OSX Lion Server running on a MacMini, but couldn't seem to answer the most basic of questions because as their business people stated "We are not Server Certified" ... they recommended I talk to an outside consultant to get these basic questions answered which seems a little extreme.
So I'm hoping the group can help.
(1) I read through most of the Lion Server Advanced Administrative manual.    Lion server appears from the manual to do most of what I need.   However, when I tried doing some of the functions in the manual on the demo Lion Server at the Apple Store, many of the functions I wanted to do did not seemed to either be installed, or their were buttons missing in the Server App.     I do not know if this was a permission level problem, because the account I setup for myself had administrative rights.
(2) In the mail app, it only appeared you could setup one mail domain.    It appeared you could setup virtual domains and users through the user app, but not through the mail domain itself?
(3) I could not find any where to enable DNS services.    The manual seems pretty straight forward in turning on DNS, but the Lion Server I saw had no DNS services running, or any way to enable them?
(4) Same for mailman listserv type function ... manual seems to be straight forward on enabling under the mail server, but again, no signs of the settings or enabling under the mail service.
(5) Under the mail app, didn't find any way to setup alternative SMTP ports ( I allow now Port 26 besides the standard Port 25 and SSL ports for my users.) ... I find port 26 gets past most firewalls at hotels etc.      Didn't see any way to control SMTP authentification too.
(6) Under the Lion Server tech description, it talk about a built in web editor, saw nothing of the kind.
So did the apple store have a limited install or am I missing something that the lion server manual does not match the capabilities of lion server.
Love to get a straight answer before purchasing hardware to replace 5 present machines.
Thank you.
David

Thanks for quick response.   Indeed, in hindsight, it appears that they had only installed the Server App, but not the Server Admin tools.
Unfortunately, I am not a system admin, but I played one on TV <grin>
All kidding aside ... I'm willing to learn, but would need most of the basics controlled through the GUI ... and then feel comfortable reading up and editting configuration files and running commands from the Terminal.
On this line, is there good documentation of this, or is this something that you know because you are familiar with Unix?    ie something like the alternate port issue ... is this something in the GUI, or something I would have to edit via Terminal?
Just trying to make an informed decision before jumping platforms.
Thanks
David

Basic questions about PCI-DIO-96

Hi
I am trying to write code to control a digital I/O board for the first time.
I have a legacy board, PCI-DIO-96, as the code implies, it is a PCI digital I/O boiard with 96 I/O channels
My first question is, what would be the drivers and development platform I should download for this board?
I am planning to write my code in C++.
The second question is, I am trying to write a very simple application to drive 96 solenoid valves through the board.
Basically I need to use the board in output mode only. No data gathering here.
The application basically needs to open and close these valves for a specified number of milliseconds. So basically,
I would be sending either 0 or 1 through the output channels, that's
it. If I send a "1" signal through the board, does
that
"toggle" the channel, meaning the channel will keep sending "1" through the ouput until I send another signal, or do I need
to send the "1" signal every few milliseconds to simulate a constant "1" signal?
Does anyone have code samples or know where I can find code samples illustrating this simple case?
It would be greatly appreciated.
I realize these are very basic questions, but I am new to hardware programming and I am on a deadline.
Thank you
Kiko

Hi Kiko,
Great to see that you are asking questions here first, you definitely came to the right place.
Since you are starting with a clean slate as far as knowing how to use this board we can start off on the right foot.
Download the latest version of the drivers for your board. You can find the drivers here: NI-DAQmx Version 7.5 for Windows 2000/NT/XP
After you have downloaded the drivers, power down the computer,
insert your board, and power it back up. The board should now be
recognized and the drivers will install similarly to any new hardware
would in Windows.
Now it's just a matter of learning how to use the commands that you need to get started.
I would recommend starting in the example files. You can find
some excellent examples that should do almost exactly what you are
trying to do by looking in this path:
C:\Program Files\National Instruments\NI-DAQ\Examples\DAQmx ANSI C\Digital\Generate Values
Look for the example that best represents what it is you are trying to
do. You will notice that all of the examples have a general flow
to how they call the board.
Create a Task and Define what that task is meant to do
Set the configuration for how exactly that task will operate
Read/Write various values until a condition is met
Close the Task
Error Check all operations to assure that everything is working properly
It's really not all that difficult and should you run into any problems or errors don't forget to search ni.com or the forums to see if others have run into similar issues to what you are facing.
Regarding how the states for digital lines work. The short answer
is that if you set a digital line to high it will stay high until you
set it back to low and vice versa. For more details on everything
digital check out our Digital Fundamentals page.
Best of luck!
Otis
Training and Certification
Product Support Engineer
National Instruments

Basic questions about Mapviewer for OBIEE 11G

Hello All..
I am pretty rookie in OBIEE and I have never worked with Mapviewer before.. I am going some POC right now in my environment and I want to experiment map reports in OBIEE.. My current OBIEE version is 11.1.1.6.5, Oracle DB version is 11.2.0.3.0 64 bit and OS is Linux 86-64 and I see that there are many versions of mapviwers to download from oracle website.
I have read a few articles on Mapviewer integration with OBIEE, but I still have a few questions about using mapviewers at the very basic level:
1. What versions do I download from Oracle website? I see there are many versions of mapviewers. Do I decide the version based on my OBIEE version or DB version?
2. What files do I download from Oracle website? I see there is mapviewer zip files and mapbuilder zip files. Which one do I download and how does installation works?
3. My OBIEE 11G and DB are running on linux environment, but in the Mapviewer download page, I don't see Oracle differentiating the OS environments. Does that mean Mapviewer is only either Unix/Linux or Windows? How do I determine in which environment I should install the files I downloaded?
I know these are very basic questions, perhaps too basic to blog about, that's why I can't find them online..
Please advise here..
Thanks

Hello All..
I am pretty rookie in OBIEE and I have never worked with Mapviewer before.. I am going some POC right now in my environment and I want to experiment map reports in OBIEE.. My current OBIEE version is 11.1.1.6.5, Oracle DB version is 11.2.0.3.0 64 bit and OS is Linux 86-64 and I see that there are many versions of mapviwers to download from oracle website.
I have read a few articles on Mapviewer integration with OBIEE, but I still have a few questions about using mapviewers at the very basic level:
1. What versions do I download from Oracle website? I see there are many versions of mapviewers. Do I decide the version based on my OBIEE version or DB version?
2. What files do I download from Oracle website? I see there is mapviewer zip files and mapbuilder zip files. Which one do I download and how does installation works?
3. My OBIEE 11G and DB are running on linux environment, but in the Mapviewer download page, I don't see Oracle differentiating the OS environments. Does that mean Mapviewer is only either Unix/Linux or Windows? How do I determine in which environment I should install the files I downloaded?
I know these are very basic questions, perhaps too basic to blog about, that's why I can't find them online..
Please advise here..
Thanks

Basic question on J2EE 1.4.03 version

Similar Messages

Maybe you are looking for