Basic structure for sequencial control

Dear all,
I'm trying to create a vi to realize sequencial execution of subvi's, the time delay between two subvi's should also be controllable. Is there any sample program available? Thanks
Jerry

Also look under the Help menu, find examples. and search for State Machine
There are empty templates available if you look under the Files Menu, select New > From Template>
You'll see a list, such as Event Structure, with data, etc and State Machine. There should be 2 of them.
As Altenbach suggested, do a search in this forum for State Machines.
They are easy to implement, easy to use, easy to maintain, and are scalable. Use Type Def'ed control for your case selector, you'll thank me after you modify it's content for the 10th time
RayR

Similar Messages

Time Structure for multiple controls changes?

I have some controls like shown in the picture. Lets say I want to check for changes done by the user in the String controls, since every string is inside a separated cluster, I would have to create a single case (inside a Event Structure) for each string or add them one by one to the same case, again one by one. How can I check for events on all the controls of the same type without having to add them manually one by one? Or, if I check for events on all the controls, how can I then identify wich control triggered the event structure?
Attachments:
Desing.png ‏402 KB

Ty very much, I will create a "all elements" value change case, and then compare. But since in my cluster ther is a lot of diferent types of elements,the new value type gives me a analog cluster with the new value written into it, and also the control ref. Since I have all the control references stored, I would prefere to compare them instead of comprare individual elements of the cluster (to avoid a lot of unbundles and stuf), but i cannot compare this control refs (see image atached). I assume that control ref given by the Event structure is polimorfical, or weak control ref, and mine is strict. How can I convert classes?
Attachments:
Event Structure.png ‏145 KB

Multiple events structures for same control

Hi,
I would like to use a same blinking button into 2 event structures seperately.
Please see my VI, after the first event is done, the second event is not wait for user to press the button, and it is auto triggered.
How to solve that? Is there any way to reset the event?
Thanks.
Attachments:
2 events.vi ‏13 KB

It is also not clear what you are trying to do with the blinking. In your code, the LED will blink basically always. (you don't use the timeout event).
In the first frame, blinking is enabled. Nothing happens in the second frame until the start event occurs. At this time blinking gets disable for about a nanosecond and gets immediately enabled again in the third frame. Even if the second eveng would not execute, you'll never see a difference. So what's the point?
Here's a quick draft where each press of the start button toggles between blinking and not blinking. Maybe it can give you some ideas.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
2 eventsMOD.vi ‏10 KB

How to make a really basic alleyway for a beginner

Hello,I am a student making a project related to games and I picked an alleyway.I've
read through a couple of threads on here dealing with making a game of
alleyway in LabView.I a still a newbie and I am asking for some
guideance inorder to be able to make such a game.I ask you to please have some patience with me.
I
am ,as you figured it out ,EchoWolf's class mate. And I also like also
to learn LabView not just coping and cheating for I would like to
increase my knowledge in LabView and because the purpose of this assignment is to learn.
I
have seen with EchoWolf's post and I was impressed how I was able to
make a ball bounce from different starting positions and different
angles.
As I want to keep this game basic, I don't think I'll worry about having different ball speeds so far.
Alley
way is a game when the ball hits the brick and it
breaks(disappears),how can I do it do I need to vanish it using the
property node.
I am sorry, I was not taught enough and I only ask
for guideance and patience for I am a quick learner and I am very good
at Math and Physics and I have some experience in C++ although the
syntax stinks.
Due to my inexperience, this might thake a lot of time.I thank you
for any and all help anyone may be able to provide. Thank you in
advanced for your patience.May I never fail you.
This is what I have found .XD
I am having trouble posting this message.
“Give a man a fish and he will eat for a day; teach a man to fish and he will eat for a lifetime”
"to learn a lesson is a far better reward than to win a prize early in the GAME"
Attachments:
alleyway.llb ‏318 KB

LOL,
First, let's play nice and actually give the source of the code you attached. I have the gut feeling that it is overly complicated and could be done with 25% of the code.
As a first step, I would enable "smooth updates" on the image indicator to prevent the annoying flickering
Echo Wolf2 wrote:
As I want to keep this game basic, I don't think I'll worry about having different ball speeds so far.
Yes, you have to worry, because the speed e.g. needs to change sign when it hits an object. Of course you could solve it with complex data and keep the speed magnitude constant.
Echo Wolf2 wrote:
Alley way is a game when the ball hits the brick and it breaks(disappears),how can I do it do I need to vanish it using the property node.
I don't think you understand the meaning of "property node". What exactly did you have in mind?
Echo Wolf2 wrote:
I am sorry, I was not taught enough and I only ask for guideance and patience for I am a quick learner and I am very good at Math and Physics and I have some experience in C++ although the syntax stinks.
It's probably the wrong approach trying to reverse engineer existing complicated code, so what I would do is start with some simple code like your classmate, writing someting where the ball bounces off walls only. Then you can expand it and add bricks. At the end add a paddle for user control.
Make a plan about good data structures. How is the arena represented in memory?
Echo Wolf2 wrote:
Due to my inexperience, this might thake a lot of time.I thank you for any and all help anyone may be able to provide. Thank you in advanced for your patience.May I never fail you.
The only way to really gain experience is to write programs. It's been 6+ hours since you posted. How far did you get in the meantime? Show us what you are doing and please ask questions when you get stuck.
We won't write assignments for you, but we are willing to nudge you in the right direction.
LabVIEW Champion . Do more with less code and in less time .

Build XML for Custom Nested Accordian (like Tree View Structure) for SharePoint List Data

Expected output in Xml:
<?xml version="1.0" encoding="utf-8" ?>
- <TopRoot>
- <Root id="1" Name="Department">
- <Type id="2" Name="IT">
- <SubType id="3" Name="Technology">
<SubSubType id="4" Name="Sharepoint" />
<SubSubType id="5" Name="ASP.NET" />
<SubSubType id="6" Name="HTML 5" />
</SubType>
</Type>
</Root>
</TopRoot>
List Details:
list details for storing category / sub category data and code to build tree structure for the same.
1.Create Custom List named “CategoryDetails”:
2.Create Column “Category Name” of type single line of text. Make it as required field and check Yes for Enforce Unique values.
3.Create column “Parent Category” of type lookup. under Additional Column Settings.
Get information dropdown, select “CategoryDetails”.
4.Choice column ["SRTypeName"] 1.Root,2.SRTYPE,3.SubSRTYPE, 4.SUBSUBSRTYPE
In this column dropdown, select “Category Name”:
Referance:
http://www.codeproject.com/Tips/627580/Build-Tree-View-Structure-for-SharePoint-List-Data    -fine but don't want tree view just generate xml string
i just follwed above link it work perferfectly fine for building tree view but i don't want server control.
Expected Result:
My ultimate goal is to generate xml string like above format without building tree view.
I want to generate xml using web service and using xml i could convert into nested Tree View Accordian in html.
I developed some code but its not working to generate xml /string.
My modified Code:
public const string DYNAMIC_CAML_QUERY =
        "<Where><IsNull><FieldRef Name='{0}' /></IsNull></Where>";
        public const string DYNAMIC_CAML_QUERY_GET_CHILD_NODE =
        "<Where><Eq><FieldRef Name='{0}' /><Value Type='LookupMulti'>{1}</Value></Eq></Where>";
        protected void Page_Load(object sender, EventArgs e)
            if (!Page.IsPostBack)
             string TreeViewStr= BuildTree();
             Literal1.Text = TreeViewStr;
        StringBuilder sbRoot= new StringBuilder();
        protected string BuildTree()
            SPList TasksList;
            SPQuery objSPQuery;
            StringBuilder Query = new StringBuilder();
            SPListItemCollection objItems;
            string DisplayColumn = string.Empty;
            string Title = string.Empty;
            string[] valueArray = null;
            try
                using (SPSite site = new SPSite(SPContext.Current.Web.Url))
                    using (SPWeb web = site.OpenWeb())
                        TasksList = SPContext.Current.Web.Lists["Service"];
                        if (TasksList != null)
                            objSPQuery = new SPQuery();
                            Query.Append(String.Format(DYNAMIC_CAML_QUERY, "Parent_x0020_Service_x0020_Id"));
                            objSPQuery.Query = Query.ToString();
                            objItems = TasksList.GetItems(objSPQuery);
                            if (objItems != null && objItems.Count > 0)
                                foreach (SPListItem objItem in objItems)
                                    DisplayColumn = Convert.ToString(objItem["Title"]);
                                    Title = Convert.ToString(objItem["Title"]);
                                    int rootId=objItem["ID"].ToString();
                                    sbRoot.Append("<Root id="+rootId+"
Name="+Title+">");
                                    string SRAndSUBSRTpe = CreateTree(Title, valueArray,
null, DisplayColumn, objItem["ID"].ToString());
                                    sbRoot.Append(SRAndSUBSRTpe);
                                    SRType.Clear();//make SRType Empty
                                    strhtml.Clear();
                                SRType.Append("</Root>");
            catch (Exception ex)
                throw ex;
            return SRType.ToString();
         StringBuilder strhtml = new StringBuilder();
        private string CreateTree(string RootNode, string[] valueArray,
      List<SPListItem> objNodeCollection, string DisplayValue, string KeyValue)
            try
                strhtml.Appends(GetSRType(KeyValue, valueArray, objNodeCollection);
            catch (Exception ex)
                throw ex;
            return strhtml;
        StringBuilder SRType = new StringBuilder();
        private string GetSRType(string RootNode,
        string[] valueArray, List<SPListItem> objListItemColn)
            SPQuery objSPQuery;
            SPListItemCollection objItems = null;
            List<SPListItem> objNodeListItems = new List<SPListItem>();
            objSPQuery = new SPQuery();
            string objNodeTitle = string.Empty;
            string objLookupColumn = string.Empty;
            StringBuilder Query = new StringBuilder();
            SPList objTaskList;
            SPField spField;
            string objKeyColumn;
            string SrTypeCategory;
            try
                objTaskList = SPContext.Current.Web.Lists["Service"];
                objLookupColumn = "Parent_x0020_Service_x0020_Id";//objTreeViewControlField.ParentLookup;
                Query.Append(String.Format
                (DYNAMIC_CAML_QUERY_GET_CHILD_NODE, objLookupColumn, RootNode));
                objSPQuery.Query = Query.ToString();
                objItems = objTaskList.GetItems(objSPQuery);
                foreach (SPListItem objItem in objItems)
                    objNodeListItems.Add(objItem);
                if (objNodeListItems != null && objNodeListItems.Count > 0)
                    foreach (SPListItem objItem in objNodeListItems)
                        RootNode = Convert.ToString(objItem["Title"]);
                        objKeyColumn = Convert.ToString(objItem["ID"]);
                        objNodeTitle = Convert.ToString(objItem["Title"]);
                        SrTypeCategory= Convert.ToString(objItem["SRTypeName"]);
                       if(SrTypeCategory =="SRtYpe")
                          SRType.Append("<Type id="+objKeyColumn+" Name="+RootNode+ ">");
                         if (!String.IsNullOrEmpty(objNodeTitle))
                          SRType.Append(GetSRType(objKeyColumn, valueArray, objListItemColn));
                      if(SrTypeCategory =="SRSubTYpe")
                          SRType.Append("<SRSubType id="+objKeyColumn+" Name="+RootNode+
">");
                         if (!String.IsNullOrEmpty(objNodeTitle))
                          SRType.Append(GetSRType(objKeyColumn, valueArray, objListItemColn));
                      if(SrTypeCategory =="SubSubTYpe")
                          SRType.Append("<SubSubType id="+objKeyColumn+" Name="+RootNode +"
></SubSubType");
                    SRType.Append("</SubType>");
                    SRType.Append("</Type>");
            catch (Exception ex)
                throw ex;
            return SRType.ToString();
            // Call method again (recursion) to get the child items

Hi,
According to your post, my understanding is that you want to custom action for context menu in "Site Content and Structure" in SharePoint 2010.
In "SiteManager.aspx", SharePoint use MenuItemTemplate class which represent a control that creates an item in a drop-down menu.
For example, to create or delete the ECB menu for a list item in
"Site Content and Structure", we can follow the steps below:
To add the “My Like” menu, we can add the code below:
<SharePoint:MenuItemTemplate
UseShortId=false
id="OLListItemLike"
runat="server"
Text="My Like"
ImageUrl="/_layouts/images/DelItem.gif"
ClientOnClickNavigateUrl="https://www.google.com.hk/"
/>
To remove the “Delete” menu, we can comment the code below:
<SharePoint:MenuItemTemplate
UseShortId=false
id="OLListItemDelete"
runat="server"
Text="<%$Resources:cms,SmtDelete%>"
ImageUrl="/_layouts/images/DelItem.gif"
ClientOnClickScript="%SmtObjectDeleteScript%"
/>
The result is as below:
More information:
MenuItemTemplate Class (Microsoft.SharePoint.WebControls)
MenuItemTemplate.ClientOnClickScript property (Microsoft.SharePoint.WebControls)
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Proper security structure for Single Sign on Server

We are all used to how we design security structure for vCenter Server if you have had an existing VMware environment prior to 5.1. Who should have administrative privileges in vCenter Server, what roles, permissions, and so on should be assigned to what users and groups - these questions have already been addressed in our current configuration.
Now Single Sign on introduces a significant new point of consideration for determining issues of access and authentication.
I'd like to get some ideas on how this should be handled. For example, should previous VMware administrators by definition become Single Sign on Administrators? Should the administrators of the Active Directory domain now start to get involved with the Single Sign on Server?
For example, Single Sign on now forces VMware administrators to configure things like:
-Password Complexity Policy for SSO
-Password Expiration for SSO
-Lockout Policy
We already probably have these things tightly controlled in AD and locked down with group policy, but you can't apply group policy directly to an SSO server and make it receive a GPO from Active Directory. (You can make the Windows OS that SSO is running on have a GPO applied, but it won't configure SSO itself, just the OS).
VMware admins are looking at a new set of questions relating to authentication and authorization. Someone has to have written something or will be writing something to help us get the big picture of what is changing with SSO if anything and how we need to look at SSO from a security design and best practices.
Should we just make existing vCenter Server admins SSO admins or do we need to take a step back and reconsider?

Hello,
Actually, yes. SSO is fairly robust in 5.5. It has a few limitations around email of expired passwords, but that is mainly because some people do not use them. I use SSO to provide the usernames and passwords for all my VMware vCenter and related product service accounts. I.e. an account for vdp, Horizon, vCops, Log Insight, etc. This is more about keeping systems segregated once more with no real need for AD for services. But AD via SSO is used by users.
Read the documentation, and determine how SSO fits into your current password policy and take a long hard look at your virtualization management environment. Is there a 1 service account per service talking directly to vCenter? If not, SSO can help you implement that. The key is to match its functionality to your security policy.
Best regards,
Edward L. Haletky
VMware Communities User Moderator, VMware vExpert 2009, 2010, 2011,2012,2013,2014
Author of the books 'VMWare ESX and ESXi in the Enterprise: Planning Deployment Virtualization Servers', Copyright 2011 Pearson Education. 'VMware vSphere and Virtual Infrastructure Security: Securing the Virtual Environment', Copyright 2009 Pearson Education.
Virtualization and Cloud Security Analyst: The Virtualization Practice, LLC -- vSphere Upgrade Saga -- Virtualization Security Round Table Podcast

COPA Assessment Cycle using KEU5 for multiple controlling areas

Hello All,
There is an organization with operations in several countries. There is a separate controlling area for each country. There is one controlling area, for instance, for Germany and another for Netherlands.
A problem is encountered while executing transaction KEU5 for multiple controlling areas in parallel. For instance, when one user from Germany executes KEU5 for an assessment cycle for Germany controlling area and at the same time another user from Netherlands tries to execute KEU5 for a cycle for NL controlling area, the user from Netherlands encounters an error message u201C'Cycle XXXX 01.02.2008 cannot be started because run group 0000 is locked'.
Apparently SAP allows assessment cycles for exactly one controlling area to be executed together. This poses a problem since the organization plans to implement SAP in several other countries (There will be one separate controlling area for each country as per the organization structure adopted by the company).
Any ideas, views or suggestions on the aforesaid issue would be highly appreciated.
Regards,
Soumya

Hi Soumya,
Did you find any text in SAP Documentation saying that "SAP does not allow cycles belonging to different controlling areas to be executed at the same time"...?
Pls find the following text from SAP Help...
Parallel Processing of Cycles of an Allocation Type
Use
Parallel processing of cycles results in considerable time savings. To process cycles of one allocation type in parallel, they must be assigned to different cycle run groups.
You define the cycle run groups in the cycle header data. You also assign cycles to the cycle run groups in the header data.
To process the cycles of a cycle run group in parallel, start the cycles one after the other, if required, in different sessions.
You are carrying out a cross-company code cost accounting and want to perform the actual assessment in the individual company codes in parallel. Create a cycle run group for each company code and assign the appropriate cycles to these groups. You can then carry out the actual assessment in the individual company codes in parallel.
When you execute a cycle, you can start a consistency check. The system checks whether you are allowed to execute the selected cycles in parallel.
Though I didn't come across such requirement, I feel, my earlier suggestion will work out...
Srikanth Munnaluri

How to create a simple File structure for a large project?

Hi to all,
I've own and operated my own website design/development (a 1 woman office, plus many sub-contractors) over the period of 8 years. I started hand-coding HTML sites in 1997, before the creation DW (though I think the first ver was for Mac in '97). Over the recent years I've udated my skills to include CSS and enough Java/PHP to customize and/or troubleshoot current projects (learn as I go).
The majority of my clients have been other 1-10 person entrepreneur companies. I've recently won a bid to redesign a government site which consist of 30 departments, including their main site.
The purpose of this thread is to get some ideas on creating a file management/structure. Creating file management setup for smaller companies was a piece of cake, using a simple file mgmt structure within DW. Their current file structure is all over the place. I've read about a very good, simple file struture in a DW CS4 manual and wanted to get feedback on different methods that have worked, and have not worked, or your client:
Here's my thinking:
1. within the root dir place home.htm and perhaps a few .htm related only to home
    2. create the following folders off the root, "docs, imgs/global, CSS, FLA, Departments"
            - sub folders within docs for each dept
            - site wide css's placed into CSS
            - site wide FLAs into the FLA
            - sub-folders created within 'imgs' for each dept, including a 'global folder' for sitewide images and menu imgs (if needed)
- OR -
1. create same file structure for each dept folder, such as 'imgs/CSS/FLA/Docs'
Open for suggestions....
Ciao

It is a problem I have thought over at length and still feel what I use could be better. You are doing it the right way around researching before you start, as moving files once things are underway can course real problems. One issue is the use of similar assets across site(s), and version control if you have multiple versions of the same asset.
Can not say I have built a site(s) of that size but would recommend putting together a flow chart to help visualise the structure and find out better ways organising (works for me). Good luck, post back with your solution.

Source of xslt mapping and XSD/ XMT target structures for standard Idocs

Hi,
I am working on R/3 - XI - ICH scenario. I need xslt mapping and XSD/ XML target structures for standard IDoc like PROACT01,DELFOR01, DELVRY03. I tried to search it on marketplace but couldn't find it there. As per configuration document, these things are shipped with XI mapping content in live cache CD. But I don't have this CD with me. Can anybody tell me the source for these target structures and mapping program. ( Please share marketplace, site link or send me across the mail [email protected])
Thank you in advance.
Anand More.

Anand the other option is to import the corresponding idocs into your integration repository and then you can view the generated XSD there.
As regards XSLT mapping, you need to basically first identify as to what form you want to transform your source idoc into.
For some help on XSLT mapping check the following threads,
https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/topusers.jspa%3FforumID%3D44
https://www.sdn.sap.com/sdn/collaboration.sdn?node=linkFnode1-6&contenttype=url&content=https://Process Integration (PI) & SOA Middleware
Also have a look at my code samples,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-code-samples/generic xslt mapping in sap xi, part i.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9692eb84-0601-0010-5ca0-923b4fb8674a
cheers
Sameer

Data structure for web-based discussion forum

Hello all. I have begun work on a discussion board forum but have not yet decided upon a data structure for the hierarchy of messages to be left on a board. Any one have any thoughts or experience in this matter? My first thought was to implement a basic linked list in which every reply to a message would be a new child of a node. This would require I use recursion in some areas for counting and finding messages but I was also thinking that this way I can store each thread object in a simple fashion using serialization.
SJ

THE STANDARS DIRECTORY STRUCTURE IS :-
PROJECT FOLDER
|
|---------->WEB-INF
|------> web.xml file
|-------> classes (folder to keep java files)
|-------> lib (folder to keep jar files)

Organization Structure for Petro-oil business

Hi experts,
I'm a new consultant, and I'm implementing for a Oil & Gas Project. I want to ask you a recommendation about the solution for Organization structure.
This business sell some kind of good:
1) Hydro: mogas, diezel, mazut, kerosense...
2) Non-Hydro: cement, Iron, gas, lubricant...
I should use two org. structure for each kind, or just unique structure. Because each kind is controlled a different method, so I suggest use two org. structure, but its difficult for reporting.
Plz help me.

Hi Kumar,
Sorry for late response: but the answer is no, only one structure for each country.
Dr. Berg

Database limits for Grid control repository?

Document "Oracle® Database Licensing Information / 10g Release 2 (10.2)" [Part Number B14199-10] discusses the restricted use license of database for grid control repository and rman repository use.
nfrastructure Repository Databases A separate Oracle Database can be installed and used as a Recovery Manager (RMAN) repository without additional license requirements, provided that all the Oracle databases managed in this repository are correctly licensed. This repository database may also be used for the Oracle Enterprise Grid Control repository. It may not be used or deployed for other uses.
A separate Oracle Database can be installed and used as a Oracle Enterprise Manager Grid Control (OEM Grid Control) repository without additional license requirements, provided that all the targets (databases, applications, and so forth) managed in this repository are correctly licensed. This database may also be used for the RMAN repository. It may not be used or deployed for other uses.
There is no discussion of licensing requirements for options of the database (RAC, partitioning, etc) when the database stays within these repository use restrictions. Therefore it is unclear whether the Grid Control can be configured to provide appropriate monitoring without additional licenses.

This is the reply I received from release
management:
If they have deployed an EE edition of the database
as an OEM repository, and then want to protect that
with RAC or Data Guard, or make more Secure with ASO
or Database Vault, or indeed get any of the
additional benefits any of the options provide, then
they will need to license the option.
Let me know if that is still not clear, and I'll go
back again.Thanks.
There is a minor inconsistency in their response ... they say "if deployed on EE". However, as far as I know OEM repository required VPD, which is available only on Enterprise Edition (see http://download-east.oracle.com/docs/cd/B16240_01/doc/em.102/e10953/pre-installation_req.htm#CHDGIEAD)
However, it is quite clear that 'they' are telling us that the RAC option is not inherent in the "Special Use Licensing" as described http://download.oracle.com/docs/cd/B19306_01/license.102/b14199/editions.htm#CJAHFHBJ .
The implication (not necessarily a topic for this forum) is that the OEM is not guaranteed to be able to provide basic monitoring and reporting functionality without additional license fees to make OEM more highly available than the targets being monitored.
It would be nice to have the information about which Oracle products (database and app server) have included licenses with a basic Grid Control install and which require additional licenses as part of Chapter 1 of http://download.oracle.com/docs/cd/B19306_01/license.102/b40010/toc.htm (That document goes into excruciating detail about the extra packs, but ignores the basics.)
For that matter, since OEM Grid Control can not be purchased, it would be nice to have a list of products that provide license to install Grid Control, again in Chapter 1 of the Grid Control Licensing document listed above.
I appreciate your time in having dug into this.

Error "No extraction structure for event I3" running set up 2LIS_17_I3HDR

Hi, Experts:
I am trying to activate and run set up datasource for PM 2LIS_17_I3HDR, so that data can be extracted from R/3 into BW 3.5 system.
In R/3 environment, we have 2 clients. client 200 for configurations but has no data, and client 230 has data but can not change configurations.
I have done the following in client 200:
- Activated datasources for for PM 2LIS_17_I3HDR in RSA5.
- Made selection in RSA6.
- Activated extract structures and datasource for application 17 in LBWE and also ran job control. Now I can see the extract structures for application 17 are active in client 200 only, but inactive in client 230. I tried to turn then active in client 230 but got error "Client 230 has status not modifiable".
- I assume I should run set up tables in client 230 because it is the client with data in tables? But when run set up in OLIIBW, I got the error "
   No extraction structure for event I3: Messages active
   Message no. MCEX106
   Diagnosis
   You called the setup for the extractor structures of application '17' (Plant Maintenance). However no extractor structure is active for event I3 (messgaes).
   System Response
   Data for event I3 is not transferred to the BW interface.
   Procedure
   First activate the desired extractor structures for application '17' using the Customizing Cockpit and then start the setup again."
- I can not manually activate extract structures in client 230 because it is not modifiable. I tried moving transports, the path is not set up. I see extract structures for other applications like 11, 13 are active. So I guess there may be other ways to activate the extract structures in client 230.
- I also tried to run set up in client 200, which has extract structures for 17 in active status. But got the same error as client 230.
Would anyone please help me with what to do to fix this?
Thanks,
Jenny
Edited by: Jenny Chen on Oct 29, 2009 6:38 AM

Hi, thanks for the reply!
Just update for what we did to solve this. Both clients are for development. Client 200 is only for configuration but no data. Client 230 has data but not modifiable. Usually, when we create a structure, table, program, or active anything in 200. We will see it in 230 right away without transports. But this is not the case for activating extract structure for datasource from Business Content. We end up having Basis guy manually activate the structure for us directly in client 230 with transaction LBWE. That worked.
Thanks,
Jenny

How to modify organizational structure for workflow?

Hi,
What is the best practice for modifying the organizational structure for workflow? I know I can do all the changes in development and move it to production via transport system but is that always required.
It seems tedious to transport the org plan from dev to prod every time there is a position change etc.
And it does not allow you to change it in production since the client is locked.
I don't even have all the users I have in production in my dev box so I can't assign the correct ones to positions. Would it mean I have to have the users in the dev box mirror the ones in production?
Thank you,
Sergiy

This answer depends on the HR managment that you have there, if the HR area is a good coordinated area the best answer is to configure the system for automatic transports and pass the HR structures in this way, you can lock some dangerous infotypes in the T77TR tables and be sure that you will not have any trouble with that data. the best thing using this option is to have a specific DEV client to transport the HR structures.
If you will not have any control between the Dev Environment changes and some people will modify in Prod and other people will make transports in a Dev environment, the best option is to open the client and modify the Org structures every time you need it.
Refers to the SAP Press book Practical Workflow, section 5.4.2.
Regards.

Basic Settings for Lifecycle planning

Hello All,
I want to maintain the basic settings of Life Cycle Planning to use Like Profile
Transaction: /SAPAPO/MSDP_FCST1 - Lifecycle Planning
My question is; is it a must to use 9AMATNR and 9ALOCNO characteristics in our POS?
I have seen the sentence below in OSS note: 354660
**If you are using a characteristic for a product and do not want to use the 9AMATNR characteristic, you must specify the characteristic you would like to use.The 9AMATNR characteristic must exist in the planning object structure if you want to use it as a characteristic for a product.Only then can a LIKE profile be used.In this regard, see the information on the /SAPAPO/FCST_LIKE user parameter in note 350065.**
What I understand from this sentence is that 9AMATNR is not an obligatory characteristic to use in POS for the purpose of life cycle planning.
However when I do not use 9AMATNR I receive such an error message during the maintenance of Basic Settings for Life Cycle Planning.
*Errors have been found in your Customizing settings
*For detailed information, see consulting note #354660
*The basic settings cannot be saved
*Characteristic for product 9AMATNR is not in the planning object structur
So, does anybody know if is it a MUST to keep the 9AMATNR in the POS for lifecycle planning? May be I am doing wrong something else...
Thanks in advance

While in DP MPOS you are free to choose custom characteristics for location and product, there are certain DP functionalities like Promotion Planning which normally uses 9AMATNR as characteristic for Product. In such cases the DP MPOS in absence of 9AMATNR has an issue. Through this assignment of location and product in the MPOS, system knows the custom characteristic that needs to be mapped to 9AMATNR and 9ALOCNO for product and location.
This is useful during release from DP to SNP also.
Hope this helps.
Thanks,
somnath

Basic structure for sequencial control

Similar Messages

Maybe you are looking for