Basis level 12 error

Hi Gurus,
I just finish installing XI server and were apply patches starting with BASIS 12.In the middle of the import there was network disruption which later come with bigger problem, I can login using DDIC but later when it's compiling the first main menu, it got an error (SYNTAX ERROR),There were some T-Code that I can access to ( i.e st22, sgen) but I cannot go to the t-code SPAM.Needs ur expertise on this matter.Here are the following error :
Error in the ABAP Application Program
The current ABAP program "SAPLOLEA" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLSCP2 " in include
  "CL_SALV_FORM_ELEMENT==========CU " in
line 13:
"The type "IF_SALV_FORM_CONFIG" is unknown."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Regards,

Hi,
Check out this...
1.Now you will be in u2018manageu2019 screen of the ODS. Here, copy the activation request number ( ODSR_u2026..) of the request that is currently in activation status (yellow status) .
2.Now go to Table: u2018RSODSACTREQu2019 (T-code: SE16) and input the activation request number.In u2018ACTREQUESTu2018 field selection. Now hit the u2018Number of Entriesu2019 button and the number we obtain is the total number of DataPackets to be activated.
3.In input u2018statusu2018 selection condition enter as u22600 and hit u2018executeu2018 button at top.
4.Now look at the u2018DATAPAKIDu2018 values for non-zero u2018STATUSu2018 entries (Data Records need to activate still).
Conclusion here is that for the data packet ID(DATAPAKID) which contain 0 values till there records are activated suppose in your case is its starts from 830 till 829 records are activated from this you can predict how much time it may take to activate the remaining records.
Let me know if you still have any queries.
Regards,
Shiva.

Similar Messages

  • Error target not found base-level failed to install the packages

    Im trying to install arch on my Virtualbox VM and its just returning:
    error target not found base-level failed to install the packages to new root
    What do I do? I have selected the right mirrors, pinging google, my own VPS's and a few other servers and they all pinged fine. Any ideas on whats up? Think my VPN's IP has been blocked and thats why I cant download anything? I have tried pacman -Ssy and it worked fine but still no.

    Please read the following and follow the advice included:
    https://bbs.archlinux.org/viewtopic.php?id=57855
    With that, be sure to clarify whether the typo was just here on the forum, or whether it was also in your original command.  If it was in your original command, that would explain your results.

  • Transport-level error has occurred...No Process is on the other end of the pipe upon first ExecuteQuery() after successful connect.

    I’m running MS SQL Server 2005, Express Edition, SP3 on Windows XP.  Local connections only. 
    In preparation to restore a database, I use IWSQLDMOServer::KillProcesses() to allow the database restore.  (IWSQLSMOResore::SQLRestore())   The restore is successful and I appear to be able to connect OK.  (No error indication on the
    connect)  However, the first time I try to use the database via an ExecuteQuery() the call fails and the connection state is changed to Closed.  I also get the “Transport-level error has occurred...No Process is on the other end of the pipe” exception.
    Closing and restarting the application fixes the problem.
    Also, disconnecting and reconnecting twice before the ExecuteQuery() call also fixes the problem. 
    So, I can hide the problem by connecting twice, but I am hoping there is a better solution.
    Walter Eykel

    It appers when you connect for the restore process, you are opening a different session than that of the original one, with a different database context.
    The first time you try to execute a query, you attempt to use the session that was open BEFORE the KillProcesses() call and therefore was killed. By the time you run the first time, your client is informed that the previous session is no longer available.
    In the second time, as your client was informed that the original session was killed, it opens a new one.
    Its the same behavior as in SSMS.
    As a workaround, you could change your database context of your
    current session to a base that wont be restored, call the restore methods, and then switch back to the original database context.

  • MSI XPower OC Genie - Base Clock Error!!

    Every time I open CommandCenter I get this Base Clock Error!! Message...
    I just used OC Genie (2nd level - RED), and it looks like it can't OC my CPU but still uses the XMP of my RAM, so what gives?
    Anyone?

    Quote from: Gamtu on 06-August-13, 05:43:24
    I had a similar result with IBT.  It scared the crap out of me.  I think I hit 98c on one core  I couldn't hit the stop button fast enough.
       I know what you mean. Seeing 90C or more does make one give a double take.     I am sure if I would have used IBT at 50X, the CPU would be screaming for life and shutdown to save itself. 
    Another anomaly I can't explain is when running real world apps and programs for further stability testing at both 47X and at 50X, none of the CPU cores went over 64C at either speed! I can only come to a conclusion concerning this that these CPU's or this platform is really smart and only uses what it needs to do the job asked of it.
    Another feature of this platform that I 'really' like is the power saving is still intact even when the CPU V. is taken out of Auto.   
    I probably better leave the thread as I don't really have the exact same board or components as you and the OP have. My results and experiences with this platform may not be typical or apply to yours for comparison. I will add that as long as the CPU IMC can handle it, the Corsair Dominator Platinum RAM has been outstanding! RAM speed of 2666 @ 50X is not too shabby, but again, all depends on the CPU IMC.

  • "Multi-level error propagation carried out" in SCM 5.0

    When I use the SNP PPM Generation With Lot Size Margin function in SCM 5.0, I got the following error:
    Multi-level error propagation carried out
    Message no. /SAPAPO/OM242
    Could you please give me this help?
    Thanks,
    Lian

    Hi,
    Thank you for the information, but the problem is still there though I de-activated all user-exits...
    I also saw the following error:
    Invalid planning version
    Message no. /SAPAPO/OM015
    Thanks,
    Lian

  • Multi-level error propagation carried out Error in APO

    Dear Experts,
    We had developed a custom program that is same as /sapapo/rrp3 report, but the issue is when we use planning version other then 000 the custom program is giving the error ""Multi-level error propagation carried out"" but the RRP3 report works fine with all the planning versions.
    Please help to find the cause and to solve the issue.
    Thanks.
    Regards
    Abhinav Nallani.

    Dear Arek,
          The problem is not yet resolved . we have raised an OSS note for the same.
    as the relevant notes are already implemented in our case.
    regards
    Kiran

  • Error "Multi-level error propagation carried out" when I run a report

    Hi All,
    When I run the report /SAPAPO/CDPS_REPT - Order and Resource Reporting with the below criteria I getting error "Multi-level error propagation carried out"
    Planning Version - Simulation Version XXX
    Evaluation Start - 05/03/2011
    Evaluation End - 12/31/2013
    Evaluation List - Extended Operation List
    I do not get error when I run the report with selection as Active version 000 and Evaluation List as Order List, Operation List.
    I have tried by ruuning Live cache consistancy check, but the issue is not fixed
    Please help me to resolve this issue
    Thanks & Regards,
    Rajkumar

    Hi Jack,
    Please do post the server log file here so that we can try and find a solution for the problem you are facing.
    I had a problem a while ago with the app server too. While trying to run an application, after a few times, it would give me an error message saying the Application Server cannot be started. I rebooted my machine and thankfully it worked again. Just try this too and see if it works.
    If it doesnt we can go through the server log and try to identify the cause of the problem.
    Cheers :-)

  • CIF error-Multi-level error propagation carried out

    Dear ALL,
        When i am trying activate the integration model for Material transfer it generates queue with status SYSFAIL with message "Multi-level error propagation carried out".
    and the integration model is not activated.
      please help
    regards
    Kiran

    Dear Arek,
          The problem is not yet resolved . we have raised an OSS note for the same.
    as the relevant notes are already implemented in our case.
    regards
    Kiran

  • Multi-level error propagation during the execution of CFM2 transaction

    Hi,
    We are implementing SAP SCM 5.0 integrated to SAP R/3 Mills IS.
    During the execution of CFM2  transaction, while  trying to activate the integration model for the object u201COrdersu201D for the very first time, the following error message appears:
    *"Multi-level error propagation carried out".*
    There are also messages related to inbound queues blocked. In the case of maintenance orders, CIF_MNT_INBOUND message shows up. While working with Production orders, CIF_ORDER_INBOUND message emerges.
    The items listed below should be taken into account:
    -The production orders that are meant to be transferred to APO are regular production orders corresponding to several products.
    -We are working with configurable materials.
    -We are working with the active model (000) and for each plant we are using 2 different planning versions.
    Regards,
    Analía Nahmías

    Dear Analía,
    The corresponding error messages issued when executing //CCR indiacted the peg-ids are missing in liveCache.
    Recommendations:                                                      
    -Run transaction /SAPAPO/OM17 to check the internal consistency between database and liveCache within SCM system. Correct the inconsistencies                                                       
    -Execute report /sapapo/cif_deltareport3 to correct the inconsistencies between ECC and SCM system                            
    Regards,
    Tibor

  • Optimization of Drill Down time to Base level members

    Hi All,
    I have built a Balance Sheet Lead Sheet in which I need to show all the Entities in rows which have values for a particular Balance Sheet Account.What I am doing is providing the Entities structure at Consolidated level and then allowing users to Drill Down to base level entities but the problem is that while drilling down to last level of entity member it takes whole lot of time.I can understand that the Application will take time in returning the response on fly after suppressing the zero rows but is there any way of applying some optimization techniques to this either at FR level or HFM level.
    Thanks in advance.
    Regards
    AG

    I think you double-posted. I just replied to the other question: Re: Defining Drilling Level Restrictions
    Cheers,
    Mehmet

  • How to make operation Average work on base level of a hierarchy?

    I used Oracle OLAP 11g Sample Schema OLAPTRAIN to make a test, and found something really confused me a lot.
    Here was my steps,
    I made a dimension "TIME" with a hierarchy "calendar": all years <- year <- quarter <- month.
    And then building up two cubes,
    Cube "AVG_TEST" using dimension "TIME" with operator Average.
    Cube "SUM_TEST" using dimension "TIME" with operator Sum.
    After maintaining both dimension and cubes, I tried to query views: AVG_TEST_VIEW and SUM_TEST_VIEW and noticed the cube value based on months level were same for both of cubes. It was pretty clear that operator Average didn't work at month level within cube "AVG_TEST", but using operator Sum.
    Could any one tell me why operator didn't work on the base level of hierarchy, instead of Sum? As I have a requirement to computing average value for day level, but can't add hour level to the dimension because of huge data quantity and the speed of maintaining cube. Is there a way to make operator Average work for the base level of hierarchy?
    Any help will be really appreciated!
    Satine

    Hey Brijesh,
    Thank you for your help!
    I am still confused with it. Even month is the leaf level of dimension, but the fact data is day level precision, not month, and the value at month level still should be computed with my specified operator Average, not Sum. I mean If it could be computed with Sum (actually the value at month level was sumed up data from fact table), then why couldn't with Average at the leaf level?
    My test code is from "Oracle OLAP 11g Sample Schema OLAPTRAIN", and data looks like,
    SQL> select * from sales_fact where to_char(day_Key,'yyyy-mm')='2005-04' and rownum=1;
      QUANTITY      PRICE      SALES DAY_KEY         PRODUCT    CHANNEL   CUSTOMER
             1        125        125 13-APR-05          5298         21     284846
    SQL> select day_key,month_id from times where rownum=1;
    DAY_KEY      MONTH_ID
    31-JAN-05    JAN2005Cube name is AVG_TEST, the fact data is from sales_fact.sales. From below, it is pretty clear the value at month level was sumed up data even specified Average operator.
    SQL> SELECT * FROM AVG_TEST_VIEW where time='APR2005';
           AVG TIME
    7849372.89 APR2005
    SQL> select sum(sales) from sales_fact where to_char(day_Key,'yyyy-mm')='2005-04';
    SUM(SALES)
    7849372.89Thanks
    Satine

  • Database-level error reported by JDBC driver

    Hi everyone,
    I get an error in my Sender JDBC adapter. I am executing a stored procedure every minute. In total I have 34 JDBC senders for every different database. The error is like below. The problem is in Alert Inbox I cant see the rest of the message. This error occures just once every hour (average). I dont know why and I dont know what the rest of the error is saying.
    Any ideas how i can see the rest of the message? And where the error might be?
    Note: In communication channel monitoring everything is green.
    Database-level error reported by JDBC driver while executing statement 'EXEC [TB

    Hi,
    obviously there are concurring accesses to the table your stored procedure is accessing. This is nothing serious, because SAP XI will retry the execution of the stored procedure according to the settings of the communication channels (3times all 5 minutes is the default).  Additionally you can set the repeats in case of SQL errors in the extended tab of the communication channel configuration.
    Tuning the transaction isolation levels might help to avoid the error but can decrease the consistency of the data as well. Default isolation level is always the highest available in a database (in case of SQL Server it should be SERIALIZABLE), so locks might easily occur. I would suggest to have a look at other applications accessing the tables and determine their isolation level.
    All in all, I guess there shouldn't be real problems, because of the repeated execution of you stored procedure, but it's worth to have a look at the isolation level.
    Regards Sven

  • How to fix the field level Error(Invalid Date)

    Hi All,
    Error: 1 (Field level error)
      SegmentID: ACK
      Position in TS: 5
      Data Element ID: ACK05
      Position in Segment: 5
      Data Value: 162014
      8: Invalid Date
    can anyone help me out, How to fix above error? i searched about this but only information about the error  is given and no where it is mentioned how to fix it  and how is it generated please help me out.
    Thanks,
    Nitish

    Are you sending or receiving the EDI?
    Either way, "162014" is simply not a valid EDI data format.  Dates in x12 are expressed as CCYYMMDD so December 30, 2013 would appear as 20131230.
    If you are receiving, you need to contact the sender and have them correct the output.
    If you are sending, you need to property format that date value.  For example:
    myDateVar.ToString("yyyyMMdd");

  • A Transport-level error

    Our .net application throws an error when the wireless laptop switches from wireless access point to another inside a building. it seems like SQL is closing the existing connetion without notifying the application which thinks that sqlconnetion is still
    in OPEN state. why does SQL close a connection without notifying the application? Our programming team does not want to open and close the connection on each transaction because they think it will slow down the application.
    Error:
    "A transport-level error has occurred when sending the request to the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.)"

    I would expect a disconnect error in such a case.
    I don't think SQL Server has a design feature to follow mobile wireless devices.
    Threads:
    Timeout issue when connection to SQL Server in Wireless environment
    Having disconnections with SQL Server using a wireless connection
    QUOTE: "Ah, SQL Server connections (and the connection pooling mechanism) are not at
    all tolerant of WiFi connections. I suggest you use a replication technology
    as exposed by the SQL "Server" Compact Edition and ADO.NET 3.5 Sync
    Services. This gives you a local DBMS to work with and connectivity designed
    to work over an occasionally (and unreliable) connection."
    You may try to adjust the TCP/IP Keep Alive parameter, but no guarantee though.
    BOL: "Keep Alive
    This parameter (in milliseconds) controls how often TCP attempts to verify that an idle connection is still intact by sending a
    KEEPALIVE packet. The default is 30000 milliseconds."
    LINK:
    http://technet.microsoft.com/en-us/library/ms190771(v=sql.105).aspx
    Related thread:
    Wireless connections to SQL Databases
    Kalman Toth Database & OLAP Architect
    SQL Server 2014 Design & Programming
    New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

  • Data at base level not consolidating to the parent entity

    HI All
    I have an issue with data which exisits at the base level but do not consolidate to its parent entity.
    For example,
    2000
    2001
    2002
    2003
    Here only 2002 has data, but that is not appearing at 2000. I have checked the accounts and there we have set the IsConsolidated property.
    The consolidation happens for other entities like 1000 & 3000. The problem is only with 2000.
    Has anyone come accross this before and what is the best way to fix this?
    Thanks,
    Appu

    Is it possible that you have not activated consolidation of the entities for the period you want to consolidate? Check out the Ownership Management screens for the entity 2000. Are all child entities set to Active? Is the proper Method set? Is the PCON = 100?
    Also have you tried to select one of the child entities (e.g. 2001) and run the Force Calculate Contribution? What does this entity return at the +[Contribution]+ level?

  • JDBC: Database-level error

    Hi Folks,
         I'm trying a JDBC to JDBC scenario and I'm getting the following error.
    *Database-level error reported by JDBC driver while executing statement 'select * from EMPLOYEE where flag = 'X'.'. The JDBC driver returned the following error message: 'java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Syntax error (missing operator) in query expression 'flag = 'X'.'.'. For details, contact your database server vendor.*
      My select statement is  : select * from employee where flag = 'X'.
    Regards,
      Santosh

    Hi,
    Try with following sql query.
    select * from employee where flag = "X".
    Hope this helps.
    Thanks and Regards,
    Kalpesh

Maybe you are looking for