Batch Apply EQ and Column Settings.... Anyone??

This has been driving me nuts. I am a DJ, i use Serato, so it is crucial that my column settings and output EQ apply to ALL tracks in a given playlist... without having to assign each and EVERY tune.
Has anyone sorted this out? PLEASE HELP!!
i.e. "Custom" EQ - i am tired of going through 30 tracks and applying to each song... individually. Same goes for column settings... i want to set it up once [title-artist-length-size-bitrate-format-year-genre-dateadded] then apply that to my whole library.
I would really appreciate some help here.... i will return the favor with some of my music for free... if you like hip hop or jungle ; )
thx

I am going through the same thing... any help would be appreciated.

Similar Messages

[865PE/G Neo2 Series] Memory timings and power settings anyone?

I'm not very good with computers, so I've just played around with the timings on my memory, but have not found one stable setting as of yet.
The memory is brand new and I've tested it for errors on my brothers computer and there's nothing wrong there.
Intensive harddrive usage, dvd playing and intense downloading while listening to music are sure ways to crash my system. "..........Not less or equal" is the most common error message, but there are
many many more.
Oh, maybe I should point out that overheating's not an issue, cause I've good fans and run my computer without sidepanels.
I also like to say that I have the first generation of p4 with ht and 533fsb.
I'm sure there's something I forgot to mention but here below I'll paste the system summary that Sandra gave me.
Would be forever grateful if someone could help me out with the memory timings and power settings for my board. Setting it to "auto by spd" gives me a very unstable system, so no avail there.
I'm running the mem at 2.70 and sometimes at 2.65, since these two settings seem to be the ones with least crashes.
The Memory installed are 4*512mb ,kingston 512 kvr333x64c25 pc2700
The PSU is a Tagan "TG480-u01" 480w
Many many thanks in advance guys.
SiSoftware Sandra
Processor
Model : Intel(R) Pentium(R) 4 CPU 3.06GHz
Speed : 3.10GHz
Performance Rating : PR4118 (estimated)
Cores per Processor : 1 Unit(s)
Threads per Core : 2 Unit(s)
Internal Data Cache : 8kB Synchronous, Write-Thru, 4-way set, 64 byte line size
L2 On-board Cache : 512kB ECC Synchronous, ATC, 8-way set, 64 byte line size, 2 lines per sector
Mainboard
Bus(es) : ISA AGP PCI IMB USB FireWire/1394 i2c/SMBus
MP Support : 1 Processor(s)
MP APIC : Yes
System BIOS : American Megatrends Inc. V2.5
System : MICRO-STAR INC. MS-6728
Mainboard : MICRO-STAR INC. MS-6728
Total Memory : 2GB DDR-SDRAM
Chipset 1
Model : Micro-Star International Co Ltd (MSI) 82865G/PE/P, 82848P DRAM Controller / Host-Hub Interface
Front Side Bus Speed : 4x 135MHz (540MHz data rate)
Total Memory : 2GB DDR-SDRAM
Memory Bus Speed : 2x 168MHz (336MHz data rate)
Video System
Monitor/Panel : Iiyama A201HT VisionMaster Pro 510
Adapter : RADEON X800 Series
Adapter : RADEON X800 Series Secondary
Imaging Device : CanoScan FB630U/FB636U #2
Imaging Device : Video Blaster WebCam 3/WebCam Plus (WDM) #2
Physical Storage Devices
Removable Drive : Diskettenhet
Hard Disk : ST3160023AS (149GB)
Hard Disk : WDC WD1000BB-00CAA0 (93GB)
Hard Disk : WDC WD1200JB-00CRA1 (112GB)
Hard Disk : FUJITSU MPG3409AT E SCSI Disk Device (38GB)
CD-ROM/DVD : PHILIPS DVDR1640P (CD 63X Rd, 63X Wr) (DVD 8X Rd, 8X Wr)
CD-ROM/DVD : PLEXTOR CD-R PX-W4824A (CD 40X Rd, 48X Wr)
CD-ROM/DVD : AXV CD/DVD-ROM SCSI CdRom Device (CD 32X Rd) (DVD 4X Rd)
CD-ROM/DVD : AXV CD/DVD-ROM SCSI CdRom Device (CD 32X Rd) (DVD 4X Rd)
CD-ROM/DVD : AXV CD/DVD-ROM SCSI CdRom Device (CD 32X Rd) (DVD 4X Rd)
CD-ROM/DVD : AXV CD/DVD-ROM SCSI CdRom Device (CD 32X Rd) (DVD 4X Rd)
CD-ROM/DVD : AXV CD/DVD-ROM SCSI CdRom Device (CD 32X Rd) (DVD 4X Rd)
Logical Storage Devices
1.44MB 3.5" (A:) : N/A
Hard Disk (C:) : 149GB (101GB, 67% Free Space) (NTFS)
Xp (D:) : 112GB (2.1GB, 2% Free Space) (NTFS)
Big (E:) : 93GB (9GB, 10% Free Space) (NTFS)
Jimjimjim (F:) : 38GB (2.1GB, 5% Free Space) (NTFS)
Bologna_2 (G:) : 3.9GB (UDF)
CD-ROM/DVD (H:) : N/A
Bfv_3 (I:) : 486MB (CDFS)
Doom 3 roe (J:) : 650MB (CDFS)
Sims2ep1_1 (K:) : 650MB (CDFS)
Bf2 dvd (L:) : 1.9GB (UDF)
CD-ROM/DVD (M:) : N/A
Peripherals
Serial/Parallel Port(s) : 1 COM / 0 LPT
USB Controller/Hub : Intel(R) 82801EB USB Universal Host Controller - 24D2
USB Controller/Hub : Intel(R) 82801EB USB Universal Host Controller - 24D4
USB Controller/Hub : Intel(R) 82801EB USB Universal Host Controller - 24D7
USB Controller/Hub : Intel(R) 82801EB USB2 Enhanced Host Controller - 24DD
USB Controller/Hub : Intel(R) 82801EB USB Universal Host Controller - 24DE
USB Controller/Hub : USB-rotnav (hub)
USB Controller/Hub : USB-rotnav (hub)
USB Controller/Hub : USB-rotnav (hub)
USB Controller/Hub : USB-rotnav (hub)
USB Controller/Hub : USB-rotnav (hub)
USB Controller/Hub : USB-enhet (sammansatt)
USB Controller/Hub : Stöd för USB-skrivarport
FireWire/1394 Controller/Hub : OHCI-kompatibel IEEE 1394-värdstyrenhet
Keyboard : Logitech HID-Compliant Keyboard
Keyboard : HID-tangentbordsenhet
Mouse : HID-compliant MX310 Optical Mouse
Mouse : HID-kompatibel mus
Mouse : HID-kompatibel mus
Human Interface : Logitech WingMan Force 3D USB (HID)
Human Interface : HID-kompatible konsumentkontrollenhet
Human Interface : HID-kompatibel enhet
Human Interface : Logitech Virtual Hid Device
Human Interface : Logitech Virtual Hid Device
Human Interface : Logitech USB MX310 Optical Mouse
Human Interface : Logitech WingMan Force 3D USB
Human Interface : USB HID (Human Interface Device)
Human Interface : Internet Keys USB
MultiMedia Device(s)
Device : Audigy X YouP-PAX A4 v1.00 Audio Driver(WDM)
Device : Creative Game Port
Device : Pinnacle PCTV Stereo PAL Capture Device
Printers and Faxes
Model : Microsoft Office Document Image Writer
Model : Canon PIXMA iP4000
Model : Adobe PDF
Power Management
AC Line Status : On-Line
Operating System(s)
Windows System : Microsoft Windows XP/2002 Professional (Win32 x86) 5.01.2600 (Service Pack 2)
Network Services
Adapter : Intel(R) PRO/1000 MT Desktop Adapter #2

Thanks for your answers.
Danny: 1. Yes, I've put my memory in my brothers computer, and ran memtest there, and it came out ok, but on mine it crashes almost instantly.
2. Yea, I have 2 fans blowing into the case and one out, so airflow is good, cpu is also cool and seems to be happy ;-)
Geps: I can't say I understand all these numbers but there are som specs here as an example, Tagan TG480-U01 480W ATX
I can't imagine that this psu ain't enough, and if so.....I've been had by the dealer.

Applying Metric and Policy Settings globally

Hi,
I wish to remove some Metric and Policy Settings globally.
Example: I want to remove monitoring for percentage of space left in tablespaces. Instead, I want to make all tablespaces auto-extensible and only monitor disk space.
I don't want to go into the configuration of each and every database in order to do this. There must be a way to globally remove out-of-box configurations and globally add a custom configured one, or is that not true?
Thank you for any insights!
Maria

It disappears only because there is a drop down at the top that says to filter "metrics with thresholds" just switch that to "All metrics" and you will see the blank ones again. As for the disabling a collection. A collection is used for many metrics. When you go to disable a metric collection, by clicking on the link for "Every 15 minutes" (for example). It will list all of the metrics that you will no longer collect data for.
Again, I would suggest not stopping the collection, and simply blanking out the thesholds. Thats the way it was designed.
Eg. Disabling Archive space used collection will disable the following other metrics:
Archive Area Used (%)
Archive Area Used (KB)
Dump Area Directory
Dump Area Used (%)
Dump Area Used (KB)
Free Archive Area (KB)
Free Dump Area (KB)
Total Archive Area (KB)
Total Dump Area (KB)

How to customize row and column settings in BI report

Hi SDN,
We have integrated EP702 and BI 704systems and uploaded BI roles into portal. Now i want to personalize BI report settins.
There are 10 columns in BI report, but initially 4 columns are only displayed. But we want to display all the columns initially. I didn't find any option to customize these settings. And variable screen button is displayed when click on Filter link. But we require this button in report itself. Information and Show chars buttons are not available in report.
I am working on BI reports for the first time. Please help me to customize settings.
regards,
Sree.

By default BEx web using a web template called 0ANALYSIS_PATTERN to render the queries. Most clients create a copy of SAP supplied standard web template and customize it to their needs. Most of the changes are what you have described. You can add a new button on the toolbar. Change the Analysis Item properties to control the number of columns.
Once you have a new desired web template, you can set it as your default adhoc-analysis web template in IMG. Look for a node called Report relevant settings. All this setup needs to be done on the BW system. A restart of BI java is required after the customizing settings have been changed.
Thanks
Vineet

HT4352 I have followed all the instructions on home sharing and it used to work perfectly. With the new apple OS upgrade my apple TV now longer sees anything, even though I I applied all home sharing settings again. Anyone know how to fix this?

I am trying to get home sharing to work on the applie tv and its not working after a Mac OS update. It has not worked for about a month and use to work fine. Has anyone else experienced this problem. Is Apple working on a fix for the problem? Is there a work around?
Thanks,
Anthony

A frequent cause of consistent failure to enable AirPlay or HomeSharing at all, is the service being blocked on the network. Make sure your network isn't hidden, has a unique name, that MAC address authentication is disabled, security is set to use WPA 2 Personal and that there is only one router/device acting as a DHCP server and providing NAT services.
Make sure your router/computer allows access over the following ports
Port
Type
Protocol
Used By
53
TCP/UDP
DNS
DNS
80
TCP
HTTP
AirPlay, iTunes Store
123
TCP/UDP
NTP
Network Time
443
TCP
HTTPS
AirPlay, PhotoStream, iTunes Store
554
TCP/UDP
RTSP
AirPlay
1900
UDP
SSDP
Bonjour
3689
TCP
DAAP
iTunes, AirPlay, HomeSharing
5297
TCP
Bonjour
5298
TCP/UDP
Bonjour
5350
UDP
NAT
Bonjour
5351
UDP
NAT
Bonjour
5353
TCP/UDP
MDNS
Bonjour, AirPlay, HomeSharing
8000-8999
TCP
iTunes Radio Streams
42000-42999
TCP
iTunes Radio Streams
49159
UDP
MDNS (Win)
Bonjour, AirPlay
49163
UDP
MDNS (Win)
Bonjour, AirPlay
Refer to your router manual/manufacturer for any settings that are specific to that model.
Another frequent cause of consistent failure to enable AirPlay or HomeSharing at all, is security software, in many cases configuring it correctly, disabling it or even uninstalling it can help, but in some cases the security software can cause problems that simply reconfiguring, disabling or uninstalling cannot reverse.
If you are consistently unable to activate AirPlay, have tried all the steps in this article and have security software installed on your system, you might benefit from contacting its provider or participating in any online forums they run to discuss the matter with them.

HT1386 I just got an iphone 4 and when I go to sync it, it appears in the left hand column but when I click on it there is just a blank screen with the apply logo and a tiny lock.

I just got an iphone 4 and when I go to sync it, it appears in the left hand column but when I click on it there is just a blank screen with the apply logo and a tiny lock.

OK, I think I fixed it.
After trying to restore with an old backup from the phone (it estimated it would take 4 hours) I cancelled and went through the setup menus again, but set it up as a new phone. It then appeared in iTunes and I restored it from the computer, not the phone. It appears to be working, it's syncing my old apps right now.
Summary:
1. Reset settings on phone (hopefully you backed up fairly recently)
2. Set up as NEW iPhone in setup menu on phone
3. Restore from iTunes on computer when it recognizes the phone
4. Cross fingers

Event ID 1085 on DC - Failed to Apply the Group Policy Local Users and Groups Settings

I have a domain with 2 DCs. The primary DC is running Server 2012 and is raising Event ID 1085 every 10 minutes and 20 seconds.
Windows failed to apply the Group Policy Local Users and Groups settings. Group Policy Local Users and Groups settings might have its own log file. Please click on the "More information" link.
System
- Provider
[ Name] Microsoft-Windows-GroupPolicy
[ Guid] {AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}
EventID 1085
Version 0
Level 3
Task 0
Opcode 1
Keywords 0x8000000000000000
- TimeCreated
[ SystemTime] 2014-10-20T20:09:03.706992400Z
EventRecordID 130087
- Correlation
[ ActivityID] {FDDFB8C5-9ECF-41B9-B2B4-3AD0B345A37A}
- Execution
[ ProcessID] 1000
[ ThreadID] 3280
Channel System
Computer SERVER.DOMAIN.NAME
- Security
[ UserID] S-1-5-18
- EventData
SupportInfo1 1
SupportInfo2 4404
ProcessingMode 0
ProcessingTimeInMilliseconds 10343
ErrorCode 183
ErrorDescription Cannot create a file when that file already exists.
DCName \\SERVER.DOMAIN.name
ExtensionName Group Policy Local Users and Groups
ExtensionId {17D89FEC-5C44-4972-B12D-241CAEF74509}
Everything I look up for Event ID 1085 seems to be about a different cause.
Any ideas?

I enabled tracing on a domain gpo and I still get the error when running gpupdate /force .
I'm also still getting Event 1085. Here's the trace file. I've anonymized the site/domain and the GUIDs.
2014-10-21 11:16:54.003 [pid=0x3e8,tid=0xcd0] Entering ProcessGroupPolicyExLocUsAndGroups()
2014-10-21 11:16:54.018 [pid=0x3e8,tid=0xcd0] SOFTWARE\Policies\Microsoft\Windows\Group Policy\{GUID-1}
2014-10-21 11:16:54.018 [pid=0x3e8,tid=0xcd0] BackgroundPriorityLevel ( 0 )
2014-10-21 11:16:54.018 [pid=0x3e8,tid=0xcd0] DisableRSoP ( 0 )
2014-10-21 11:16:54.018 [pid=0x3e8,tid=0xcd0] LogLevel ( 2 )
2014-10-21 11:16:54.018 [pid=0x3e8,tid=0xcd0] Command subsystem initialized. [SUCCEEDED(S_FALSE)]
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] Background priority set to 0 (Idle).
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ----- Parameters
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] CSE GUID : {GUID-1}
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] Flags : ( X ) GPO_INFO_FLAG_MACHINE - Apply machine policy rather than user policy
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( X ) GPO_INFO_FLAG_BACKGROUND - Background refresh of policy (ok to do slow stuff)
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_SLOWLINK - Policy is being applied across a slow link
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_VERBOSE - Verbose output to the eventlog
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_NOCHANGES - No changes were detected to the Group Policy Objects
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_LINKTRANSITION - A change in link speed was detected between previous policy application and current policy application
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_LOGRSOP_TRANSITION - A change in RSoP logging was detected between the application of the previous policy and the application of the current policy.
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( X ) GPO_INFO_FLAG_FORCED_REFRESH - Forced Refresh is being applied. redo policies.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_SAFEMODE_BOOT - windows safe mode boot flag
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_ASYNC_FOREGROUND - Asynchronous foreground refresh of policy
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Token (computer or user SID): S-1-5-18
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Abort Flag : Yes (0x313be090)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] HKey Root : Yes (0x80000002)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Deleted GPO List : No
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Changed GPO List : Yes
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Asynchronous Processing : Yes
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Status Callback : No (0x00000000)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] WMI namespace : Yes (0x32273740)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] RSoP Status : Yes (0x320cc7f4)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Planning Mode Site : (none)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Computer Target : No (0x00000000)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] User Target : No (0x00000000)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Calculated list relevance. [SUCCEEDED(S_FALSE)]
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ----- Changed - 0
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Options : ( ) GPO_FLAG_DISABLE - This GPO is disabled.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPO_FLAG_FORCE - Do not override the settings in this GPO with settings in a subsequent GPO.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Options (raw) : 0x00000000
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Version : 19267878 (0x01260126)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] GPC : LDAP://CN=Machine,CN={GUID-2},CN=Policies,CN=System,DC=SITE,DC=DOMAIN
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] GPT : \\SITE.DOMAIN\sysvol\SITE.DOMAIN\Policies\{GUID-2}\Machine
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] GPO Display Name : Default Domain Policy
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] GPO Name : {GUID-2}
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] GPO Link : ( ) GPLinkUnknown - No link information is available.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPLinkMachine - The GPO is linked to a computer (local or remote).
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPLinkSite - The GPO is linked to a site.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( X ) GPLinkDomain - The GPO is linked to a domain.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPLinkOrganizationalUnit - The GPO is linked to an organizational unit.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GP Link Error
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] lParam : 0x00000000
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Prev GPO : No
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Next GPO : Yes
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Extensions : [{00000000-0000-0000-0000-000000000000}{GUID-3}][{GUID-1}{GUID-3}][{GUID-4}{GUID-5}{GUID-6}{GUID-7}{GUID-8}][{GUID-9}{GUID-10}][{GUID-11}{GUID-5}{GUID-6}]
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] lParam2 : 0x3146f978
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Link : LDAP://DC=SITE,DC=DOMAIN
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Purge GPH : C:\ProgramData\Microsoft\Group Policy\History\{GUID-2}\Machine\Preferences\Groups\Groups.xml
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Read GPE XML data file (592 bytes total).
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ----- Changed - 1
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Options : ( ) GPO_FLAG_DISABLE - This GPO is disabled.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( ) GPO_FLAG_FORCE - Do not override the settings in this GPO with settings in a subsequent GPO.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Options (raw) : 0x00000000
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Version : 1245203 (0x00130013)
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] GPC : LDAP://CN=Machine,CN={GUID-12},CN=Policies,CN=System,DC=SITE,DC=DOMAIN
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] GPT : \\SITE.DOMAIN\sysvol\SITE.DOMAIN\Policies\{GUID-12}\Machine
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] GPO Display Name : Default Domain Controllers Policy
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] GPO Name : {GUID-12}
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] GPO Link : ( ) GPLinkUnknown - No link information is available.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( ) GPLinkMachine - The GPO is linked to a computer (local or remote).
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( ) GPLinkSite - The GPO is linked to a site.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( ) GPLinkDomain - The GPO is linked to a domain.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( X ) GPLinkOrganizationalUnit - The GPO is linked to an organizational unit.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( ) GP Link Error
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] lParam : 0x00000000
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Prev GPO : Yes
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Next GPO : No
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Extensions : [{00000000-0000-0000-0000-000000000000}{GUID-3}][{GUID-1}{GUID-3}][{GUID-9}{GUID-10}]
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] lParam2 : 0x324e8198
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Link : LDAP://OU=Domain Controllers,DC=SITE,DC=DOMAIN
2014-10-21 11:16:54.127 [pid=0x3e8,tid=0xcd0] Purge GPH : C:\ProgramData\Microsoft\Group Policy\History\{GUID-12}\Machine\Preferences\Groups\Groups.xml
2014-10-21 11:16:54.127 [pid=0x3e8,tid=0xcd0] Read GPE XML data file (592 bytes total).
2014-10-21 11:16:54.143 [pid=0x3e8,tid=0xcd0] Completed get next GPO. [SUCCEEDED(S_FALSE)]
2014-10-21 11:16:54.143 [pid=0x3e8,tid=0xcd0] WQL : SELECT * FROM RSOP_PolmkrSetting WHERE polmkrBaseCseGuid = "{GUID-1}"
2014-10-21 11:16:54.143 [pid=0x3e8,tid=0xcd0] Purged 2 old RSoP entries.
2014-10-21 11:16:54.143 [pid=0x3e8,tid=0xcd0] Logging 2 new RSoP entries.
2014-10-21 11:16:54.159 [pid=0x3e8,tid=0xcd0] RSoP Entry 0
2014-10-21 11:16:54.174 [pid=0x3e8,tid=0xcd0] RSoP Entry 1
2014-10-21 11:16:54.174 [pid=0x3e8,tid=0xcd0] Completed get GPO list. [SUCCEEDED(S_FALSE)]
2014-10-21 11:16:54.174 [pid=0x3e8,tid=0xcd0] IsRsopPlanningMode() [SUCCEEDED(S_FALSE)]
2014-10-21 11:17:04.252 [pid=0x3e8,tid=0xcd0] Completed settings update (csePostProcess). [ hr = 0x800700b7 "Cannot create a file when that file already exists." ]
2014-10-21 11:17:04.252 [pid=0x3e8,tid=0xcd0] Completed CSE post-processing. [ hr = 0x800700b7 "Cannot create a file when that file already exists." ]
2014-10-21 11:17:04.267 [pid=0x3e8,tid=0xcd0] Leaving ProcessGroupPolicyExLocUsAndGroups() returned 0x000000b7

Can anyone explain me the procedure and initial settings to do sto for schedule lines?

can anyone explain me the procedure and initial settings to do sto for schedule lines?
Create a STO with new doc type for material M1 to ship from plant 1 to plant 2 with qty as 100. On pressing enter you should be able to see schedule lines in delivery schedule tab. In schedule line you should see the Material availability date, GI date, loading date etc.
can anyone give the answer for this question..

Hi Megha,
Please find below links for Config STO with schedule lines.
http://dhavalatsap.blogspot.sg/p/configuration-of-plant-to-plant-sto.html
https://scn.sap.com/thread/1260375
Thanks,
Bala.

The wifi icon in settings has gone grey and inactive. Anyone else?

The wifi icon in Settings has suddennly gone grey and inactive. Anyone else got this?

http://support.apple.com/kb/TS1559

I just loaded Lion oxs 10.71 and now my Logic 9 software wont show up it says its not compatible also i cant find my macintosh harddrive icon that is usually shown on dektop and device browser column can anyone help me with this problem

I just loaded Lion oxs 10.71 on my I-mac computer, and now my Logic 9 software wont show up it says its not compatible also i cant find my macintosh harddrive icon that is usually shown on dektop and device browser column can anyone help me with this problem.

Mike,
I had a similar issue with Photoshop when I upgraded to both Snow Leopard and Lion. it turned out to be Rosetta is no longer present in the newer OS. Once I upgraded to Lion, Appleworks stopped working after all these years.

HT1212 I forgot my passcode and i have no backup of my Ipad, it is locked and disabled, can anyone help to restore factory settings atleast as a new ipad

I forgot my passcode and i have no backup of my Ipad, it is locked and disabled, can anyone help to restore factory settings atleast as a new ipad

Hey salosawaya,
If you have never synced your device with iTunes and you forgot your passcode, you'll follow these directions:
If you see one of following alerts, you need to erase the device:
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
"You haven't chosen to have [device] trust this computer"
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
via: iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
Welcome to Apple Support Communities!
Regards,
Delgadoh

Batch export text from multiple Indesign files, applying em and strong tags

Hi there,
I am struggling for a while now with the following workflow:
batch exporting all text (text only) as plain text, from multiple Indesign files, applying and for all the bold and italics (for instance: Molluptas verion nossum idist doluptatet maiorerum quiaspienit, cum erferiosapis eos expe nonsequas verumquae dolor sim eos doluptatiur autet lab idicili beatum deliquat).
Properly tagging the styles, will be too time consuming, as these documents are as old as 1998, have inconsistent untagged styles; it will mean to manually open up each file, assign tags for all styles (not to mention that might be some local overwrites).
This task is necessary to have all the archive, available on wordpress website.
Any feedback would be much appreciated it.
Thanks.

There may well be a script or you may have pay someone to write it. All I can tell you is that any text not mapped to a style will be a mess in the HTML code.
Can’t comment on Quark files. I have no clue what they’re capable of.
Bob

Mail and Smart Folders losing column show and hide settings - a fix?

Lately I switched my mail to be hosted by google and so in order for my in and out boxes to contain my current and older messages, I have each set as Smart Folders. It's this difference that I think might be making this bug worse.
Previous to this change I'd noticed Mail forgets which columns I have shown and what order they're in between quitting and relaunching.. but now with the smart folders, the column settings will be lost when I'm merely not paying attention to Mail (when it's hidden or in the background).
This is particularly irritating since I always use Mail with two view windows, one showing my inbox and the other showing my sent messages. What seems to be happening most is that if I have my inbox showing From and To, that setting will bleed over to the sent window.. showing me that all my sent messages are, of course, From me. I hide that column and later on it comes back by itself. Either that, or I hide the From column in Sent and later on I lose the From column in the Inbox.

Hobyx,
Wow this thread really is a little stale. Sorry about that. What it sounds like to me is the preferences file is going bad, you could try removing com.apple.mail.plist. Found in Macintosh HD -> Users -> YOUR USERS -> Library -> Preferences. Please note that you will have to add your Gmail account back in. But any emails/smart folders on your Mac wont be removed by deleting that plist.
Also On the Gmail side you will get significant better results if you select the corresponding folder in your gmail account 'Found in the sidebar' and select Mailbox -> Use this Mailbox for -> and select what your using for. Whilst using the imap setup.
Hope that helps,
Weston

'Vintage' MacBook has lost all wifi connection suddenly and stored settings. I've tried to manually input my IP address and DNS number but it just times out when trying to connect to the network can anyone help?

'Vintage' MacBook has lost all wifi connection suddenly and stored settings. I've tried to manually input my IP address and DNS number but it just times out when trying to connect to the network can anyone help?

You said:
We still couldn't get it to stop timing out. I tried to download the firmware from iClarified but iTunes said it didn't recognise the software.
Just what did yo do to gt iTunes to see the download:

I have a photo that i originally had in my iphoto library and because i used it as my desktop background i cant remove it from my desktop and screensaver settings does anyone know how i could remove it??

i have a photo that i cant get rid of in my desktop and screensaver settings and i cant find it in my iphoto library

in iPhoto, go to the View Menu/Hidden Photos and see if your photo was Hidden.

Batch Apply EQ and Column Settings.... Anyone??

Similar Messages

Maybe you are looking for