Batch Classification issue

Hi Expert,
I received incident related below with my analysis:
I updated material master with batch class 023.
added default values for some characteristics like
Customer Date Format = General (- 1M).
but when I tried to create batch master with MSC1N, classification is not pulling characteristics there,
Customer Date Format showing blank...
strange is this issue is at Dev system and not any issue at quality or produciton system.
My analysis :
I could see dependency maintained at CL03 for this class and its clearly saying that above characteristics should pull its default value.
I compared material, class & its dependency with characteristcs, but still no clues.
any once can help me please.
Thanks in advance.
Best regards,
Nilesh

Hi Nilesh,
In characteristics (CT04) under the Addnl data tab you have to tick mark the Display allowed values under Procedure for value assignment.
And in material master classification view -> under the values for class XXXX / default values maintained in characteristics are displayed. You have to select the values by double click.
Then try to create batch characteristics in MSC1N.
Regards,
Vimal

Similar Messages

Copy of Material Master charac. values to the batch classif. in GR for PO

Dear gurus,
Could you please help me with the following issue. I have a material managed in batches, and it has a classification type 023 in material master. I fill one chaacteristic of this classification with some value. Now I want this value to be copied to the batch classification during the creation of new batch while making GR to production order.
Is it possible?

Hi Nikolaj,
What I am understand your requirement is like,
You want to fetch the value of Characteristic maintain in Batch class in Material master to the Batches, correct?
But my Friend if you maintain value of characteristic in Batch Class in material master then it will works as a validation.
For Example,
Suppose your Characteristic is Colour and in Material Master Batch classification view you have maintain value as Red.Then system will not allow you any other colour in Batches.You will find that value in Drop Down list.
Regards,
Dhaval

Automatic batch classification with procedure on goods receipt does not wor

Hi,
I have a material with batch classification.
The material has two characteristics.
One is a number called VALUE.
The other is also a number (called CONVERSION) and shall be deived from the first.
A procedure is created and assigned to the second characteristic.
$SET_DEFAULT ($SELF, CONVERSION , $SELF.VALUE / 6000)
When I post a goods receive (movement Type 501) the characteristics can be filled . The field VALUE is set with 12000.
I was expecting the characteristic CONVERSION to be calculated as '2' and filled by the procedure.
This is not the case.
If however, I try to fill it manually, the system accepts only the calculated value '2'. Otherwise an error is shown.
How can I force the system to calculate and fill the second characteristic when insserting a value in the first ?
Thanks for any help.

Hi Marcus,
i have the same problem with movement type 101.
How did you solve this issue?
Can you help me.
Thank you.
CM

Batch management issue.

hello all,
i have batch management active in mm,automatic batch is created during GR.
now i want to implement fifo goods issue,but it needs material master view to be extended to classificatio tab under which i will assign the class.we have almost 20000 material already in sap system ,this may be a big task to assign class to each material.
is there any another settings or configuration available for fifo goods issue.
i know the settings like.
create a characteristic for last Goods receipt date with table name MCH1 & field LWEDT
- Assign this to class
- Create sort sequence with ascending order CU70
- Then create batch search strategy in MBC1 transaction if you want batch determination in production order
- Give the sort rule there
pls suggest me.
regards
simran.

hello all,
i am configuring fifo goods issue for 351 movement type.
during configuration i have found following settings.pls tell me whats the difference between all these 4 option given below.what option i would choose for fifo.
IMG > Logistics-General > Batch Management > Batch Valuation > Activate batch classification for goods movement in IM (only on Mvt Type 201 and not on 202)
     No branching to batch classification
1     Classification carried out in background (all batches)
2     Classification only in foregr.for mand.charac. (all batches)
3     Classification always in foreground (all batches)
4     Classification in foreground for new batches only
regards
simran

Copy batch classification in GR (101)

Dear gurus,
Could you please help me with the following issue.
I have a material managed in batches, and it has a classification type 023 in material master.
Now I want the class (with all characteristics) to be copied to the batch classification during the good reciept (MIGO / 101).
How it's possible?
When i go to the batch generated in migo (101) using T-code MSC2N, there is one icone in Classification-tab "Create classification". and i can do it manually. how can we do this automatically in GR (101).
Thanks in advance.

Hi,
Check for that movement type in OMJJ in Entry control tab where there is field called classification batch, check what is defined for that movement type.
Regards
Ravi Shankar.

Batch classification "Date of last goods receipt" is "00.00.0000"

Dear all,
I have configured all steps for batch determination for FIFO.
It worked fine for IM (stock transfer - mov.type 301) on last friday, however, get the issue today:
- After I do GR (mov.type 101), the batch is auto created, batch classification is created,
I use MSC2N to view batch classification:
the value of "Date of last goods receipt" is "00.00.0000"
What is wrong with my configuration?
Could you pls help me to fix this?
Thanl you very much for you help!
Edited by: Ngo Quoc Hung on Dec 13, 2010 10:59 AM

System Updates Batch Data in the Batch Master Record in the Following ways :
1) If the batch does not yet exist for the plant, it is automatically created.
2) If the batch already exists for the plant, the new quantity is simply posted as a receipt in the specified storage location.
When posting a goods receipt with reference to Purchase order, the system updates Posting date as the goods receipt date in general data of the batch.

Batch Classification Screen for Goods Movements

SAP Gurus,
Very recently (24. April), we experience the following issue: (PP-PI Process Order)
At the moment of process order confirmation, for any new batch assigned in the good movement overview, there's no pop-up of batch classification screen which allow our user to entry the classification data. And this functionality works fine in the past.
Do you have an idea that how it happens? We checked the configuration OMCV and master data as well, the settings are all fine to me.
Best regards,
Vincent

Dear Vincent,
I think you talk about the 101 movement, don't you? In this case this is not possible at all, check SAP note 85310
Because goods movements can be decoupled from confirmations and
processed in background, it was decided that this functionality would
not be implemented; therefore this is Standard R/3.
Solution
As a work around for this you have the following options:
1. Classify your batch manually through Batch Master Maintenance.
2. Turn off automatic goods receipt and classify your batch through the
    pop-up that is presented during MM goods receipt.
3. Do not create your batch during Order Processing. Instead have the
    system create it during confirmation and at this time you will be
    able to classify your new batch from the Goods Movement screen
    COMPONENT>BATCH MANAGEMENT>CREATE BATCH.
Note :
If you want that your batch is classified in the background you can set
in the transaction OMCV (classify batches within goods movement
overview) that the classification is to happen in the background. You
can then utilise the user exit EXIT_SAPMM07M_004 to valuate the
characteristics if it is valid for
your release.
Regards,
Sabine

Basics for Batch Classification Data

Hello Experts ,
I have few queries for Batch Classification Data .
1. Which are the tables where Batch Classification Data for the batches is stored .
2.Which Function module is called once we do the Goods movement which determines the batch
classification data .
3.When we do stock transfer for batches , then the Batch classification will run in Issuing plant and
the batch classi. data will be copied in the receiving plant . Can you please tell me that which object
carries this data from issuing plant to receiving plant.
4.There is also a user exit with which we can play with Batch classification , can you please give some information on this .
Thank you very much for the help !
Regards
Shashank

1. The table is AUSP - but why would you need to know that. There are good function modules to query, read, change classifications of batches - so why would you like to read directly from DB?
2. This depends on your release. Typicall in MIGO the module VB_CREATE_BATCH is called, the same one that is called within the BAPI to create batches.
3. See 2. When you create a batch with reference, you call the same module additionally with the key of the reference batch (this is the issueing batch).
Inside that module are loads of user exits for all kind of purposes.
Why not have a look yourself in Customizing at Logistics General -> Batch Management -> Batch Valuation.
There's the "customer exits for goods movements in inventory management" (this is called e.g. in the goodsmovement bapi and the old transactions) --> EXIT_SAPMM07M_004
and the "Valuation of Creation of New Batches Using Function Module" (this is called in the MSCxN and in MIGO) --> EXIT_SAPLV01Z_014 .
In Customizing there's also the documentation what you can achieve with the exits.
Hope this helps.
Stefan

Batch classification during GR against production order using txn MIGO

Hello All
       I am usng batch classification during for movement type 101, when am doing the GR against production order using txn MB31 the system automatically navigates to classification screen wherein i need to enter the characterstic value & it all goes well, I can also view the stock with batch no and the classifcation value when the GR is being done with txn MB1.
      But when am dong the same thing i.e. GR against production order using txn MIGO system doesnt navigates to classification screen for characterstic value entry and am able to do the posting. I want that system must navigate to classification screen automatically if i do the GR using MIGO also as it doen in the case of txn MB31.
       Please suggest what settings are to be done for the same, I am unable to figure out why the system is behaving in this manner. Kindly provide your inputs to sort out this issue. Waiting for your valuable inputs.
Regards,
J K Tharwani

Dear,
did u refer SAP Note 519303 ?
After keeping Batch Classification as 4 in OMCV, in MIGO, it will start showing the Batch Classification button under "Batch" Tab, it will not show the Batch Classification Pop-up automatically as it shows in case of MB31.
If you wan users to enter the characteristics values mandatorily in the Batch Classification then in CT04 for these characteristics activate Entry required indicator in "Basic Data" Tab
SAP Note 519303
Please refer this also,
[MIGO|Re: How can I get the MRP history?]
Regards,
R.Brahmankar

User Exit for batch classification for tcode mb1c

HI experts,
I have implement customer exit MBCFC004 EXIT_SAPMM07M_004 and CLFM0002 EXIT_SAPLCLFM_002 to set a value for
a customize characteristics.
Now I have a issue.
MBCFC004 EXIT_SAPMM07M_004 can work with migo but when I with mb1c to do same transaction it didn't
work.
CLFM0002 EXIT_SAPLCLFM_002 only work when I input a value in the customize characteristics it can change the input value.
I have set extension in OMCV for my move type. and assigned the bath to material.
I have reference
Re: User Exit for batch classification
but I haven't found any question for my solution.
please help me.
thanks a lot.

Class ZBATCH has status 1 (= 'Released') but the customizing of classtype 023 doesn't allow to classify with classes of this status. Settingsfor class status in class type 023 are different from what SAP delivers.Correct please these settings. You may lookup the correct definition of
the class status in class type 022.

Update Batch Classification for a Material

Hello friends,
I'm facing the following problem : A specific BTCI wich simulates MB01 was calling another program called SAPLCTMS to update Batch classification for a Material, this program (SAPLCTMS ) seems to be not necessary after the support package Level 57 (we just installed SAP4.6C). I didn't find any note on OSS for this...
Now i'm trying to use this BAPI instead of BTCI for the Material batch classification :
CALL FUNCTION 'BAPI_OBJCL_CHANGE'
         EXPORTING
              objectkey          = l_objnum
              objecttable        = 'MCH1'
              classnum           = 'ZGB_TIDCLASS'
              classtype          = '022'
              status             = '1'
              keydate            = sy-datum
         TABLES
              allocvaluesnumnew = t_valuesnum
              allocvaluescharnew = t_valueschar
              allocvaluescurrnew = t_valuescurr
              return             = t_return.
But its not working, it keeps asking for a batch number. I guess i'm not using the right FM ?
Any ideas about this ?
Thank you in advance for your help !
Best Regards.
Edited by: Soufiane FAYSSAL on Jun 18, 2009 11:42 AM

Hello,
I am Ashok Chelikani. I am working on the same Issue.
i am getting following message:
TYPE ID    NUMBER MESSAGE
E       |C1   |003          |Characteristic DIMENSIONSCOLOR not found or not valid
I        |CL   |736          |Assignment was not created
my procedure as follows:
CLEAR: lv_objnum.
lv_objnum = I_MSEG-MATNR.
**Get Object Details
CALL FUNCTION 'BAPI_OBJCL_GETDETAIL'
EXPORTING
objectkey = lv_objnum
objecttable = 'MARA'
classnum = 'Z_RMBCH1'
classtype = '001'
TABLES
allocvaluesnum = lt_alloc_num
allocvalueschar = lt_alloc_char
allocvaluescurr = lt_alloc_curr
return = lt_return.
IF NOT lt_return IS INITIAL.
CLEAR: lv_objnum.
lv_objnum(18) = I_MSEG-MATNR.
lv_objnum+18(10) = I_MSEG-CHARG.
CALL FUNCTION 'BAPI_OBJCL_CHANGE'
EXPORTING
objectkey = lV_objnum
objecttable = 'MCH1'
classnum = 'Z_RMBCH1'
classtype = '023'
tables
allocvaluesnumnew = lt_alloc_num
allocvaluescharnew = lt_alloc_char
allocvaluescurrnew = lt_alloc_curr
return = lt_return.
lt_return returing error message. Kindly help me.

Batch Classification for Auto GR during Production Order Confirmation

Dear All,
I have a scenario,where Auto GR has been activated in last operation of an order.Material is batch managed with certain characteristics.When I use CO11n, and go to goods movement tab,batch for 101 movement type is entered but Batch classification pop up doesn't come.For that we need to select the line item,goto extras and create batch,then Pop up for batch classification comes.But,if we do GR with MIGO & MB31, This classification screen automatically in Co11n. i have tried certain exits also, but nothing works.

Hi Stuti<
Refer the below links it will solve the issue.
[Batch Determination - help|http://help.sap.com/saphelp_45b/helpdata/en/25/283cb44f7811d18a150000e816ae6e/frameset.htm]
[SDN Thread-1|Re: Batch Determination issue -reg]
[SDN Thread-2|Batch Determination;
Regards,
Shyamal

Batch Classification Characteristic Values in MIGO...

Hi,
Can we update Batch Classification Characteristic Values in MIGO...
Batch is also created while doing MIGO. I have no issues in creating Batch.
Thanks in advance...

Hi.
You can use the CACL_VALUE_CHANGE badi.
Regards.

Batch classification details

Hi Experts,
I would liek to ask your help.
We have issue on batch classification details.
During GR, the batch classification details created are not complete, as checked in MSC3N. Why do this happen? Could you kindly help me sort out this problem?
Thank you very much for your help.
Mylene

Dear Mylene
Materials Management -> Inventory Management and Physical Inventory -> Movement Types -> Copy, Change Movement Types
It is not plant specific. This will popup a window to enter the values for classification.
You can also use transaction OMCV
Logistics - General -> Batch Management -> Batch Valuation -> Valuation for Goods Movement in Inventory Management -> Activate Batch Classification for Goods Movements in IM.
Regards
Soundar

Different Batch Classification at storage location level

Dear guru ,
I have tested that i can insert different values of batch classification for the same material and the
same batch number but in different plants.
In MSC1N/MSC2N transaction the system allow a insertion at storage location level.
Itu2019s possible to insert different values of batch classification for the same material , same batch number and the same plant but in different storage locations ?
Thanks.

hi,
check in OMCT under which batch level the current system is, if the level is set to be material level or client level, if you make a change to the batch classificaiton, it will reflect in all the plants across the clients.
Batch classification is not maintained at the storage location level.

Batch Classification issue

Similar Messages

Maybe you are looking for