Batch FTP eWay Error

Hi All,
I'm getting the following exception reported by an application making use of the Batch FTP eWay:
Batch FTP eWay error when doing data transfer operation in [put()], message=[com.stc.eways.batchext.FtpFileException: BATCH-MSG-M0130: FtpFileClientImpl.doTransferPut(): put got exception [com.stc.eways.batchext.FtpFileException: BATCH-MSG-M0129: FtpFileClientImpl.doTransferPut(): Failed to storeFile. Reply from ftp server is [250 CWD command successful.].].].Nested exception follows: ---
com.stc.eways.batchext.FtpFileException: com.stc.eways.batchext.FtpFileException: BATCH-MSG-M0130: FtpFileClientImpl.doTransferPut(): put got exception [com.stc.eways.batchext.FtpFileException: BATCH-MSG-M0129: FtpFileClientImpl.doTransferPut(): Failed to storeFile. Reply from ftp server is [250 CWD command successful.].].--- End of nested exception.
The FTP server seems to be up and responding when the error occurs; I can log on using the same credentials as those used by the eWay.
Has anyone seen this error and/or know what the issue may be?
Thanks in advance,
John

This problem is occuring randomly.
I read a set of file files and write it to mainframes datasets. While writing to mainframes I am seeing the issue occuring, but when I retry for same set of file, it works fine.
Can anybody explain better where can I look for more details.
I have log level set to finest for Batch eWay but no additional information in logs.
Thanks
Sachin
Edited by: user8307912 on Mar 9, 2011 10:11 AM
Edited by: user8307912 on Mar 9, 2011 10:11 AM

Similar Messages

BATCH-FTP-EWAY-OPERATION-ERROR

Hi all,
I get an error running my JCAPS application using an BatchFTP adapter. With the message subject BATCH-FTP-EWAY-OPERATION-ERROR.
The message is the following:
Message: Batch FTP eWay error when doing data transfer operation in [put()], message=[com.stc.eways.batchext.FtpFileException: BATCH-MSG-M0130: FtpFileClientImpl.doTransferPut(): put got exception [com.stc.eways.batchext.FtpFileException: BATCH-MSG-M0129: FtpFileClientImpl.doTransferPut(): Failed to storeFile. Reply from ftp server is [250 CWD command successful.].].].
The error message is:
<?xml version="1.0" encoding="UTF-8"?>
<Alert xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation=".\Alert.xsd">
<Id>0</Id>
<Type>Alert</Type>
<SeverityCode>2</SeverityCode>
<Severity>MAJOR</Severity>
<MessageCode>BATCH-FTP-EWAY-OPERATION-ERROR</MessageCode>
<Message>BATCH-FTP-EWAY-OPERATION-ERROR</Message>
<MessageDetails><![CDATA[Batch FTP eWay error when doing data transfer operation in [put()], message=[com.stc.eways.batchext.FtpFileException: BATCH-MSG-M0130: FtpFileClientImpl.doTransferPut(): put got exception [com.stc.eways.batchext.FtpFileException: BATCH-MSG-M0129: FtpFileClientImpl.doTransferPut(): Failed to storeFile. Reply from ftp server is [250 CWD command successful.].].].]]></MessageDetails>
<OperationalStateCode>7</OperationalStateCode>
<OperationalState></OperationalState>
<ObservationalStateCode>0</ObservationalStateCode>
<ObservationalState>UNOBSERVED</ObservationalState>
<ListenersNotified>0</ListenersNotified>
<PhysicalHostName>jcapsdr:19048</PhysicalHostName>
<EnvironmentName>BH_PROD</EnvironmentName>
<LogicalHostName>AD</LogicalHostName>
<ServerType>INTEGRATION</ServerType>
<ServerName>server</ServerName>
<ComponentType>EWAY</ComponentType>
<ComponentProjectPathName>prjBHToSATO</ComponentProjectPathName>
<ComponentName>BatchFTP2</ComponentName>
<TimeStamp>Tue Sep 06 11:16:23 EST 2011</TimeStamp>
</Alert>
What can be the problem?
Thanks for your help.
Cheers,
Andrew

If the File size is larger, then we encounter this exception.
Remedy: Restart of the service may solve
or split the file size and place them.

Sending Email When FTP Adapter Errors Out

Hello everyone,
I am developing a very simple interface to grab a file from a directory and ftp it to a partner's server. Now I want to be able to check if an error occurs when I send the file so I can send a notification e-mail to the administrator and move the file to an Error-Archive directory.
Some of the errors that could happen are:
1. Partner server is down
2. FTP Username or password is wrong
3. FTP account does not have permissions to write to the Partner server
4. ...etc
I have defined an Integration process and for the block where I ftp my file, I defined an exception which I catch in an exception branch. In the Exception branch, I have then defined steps to send notification emails and move the file to an error-archive directory. But unfortunately all the steps of the Integration Process seems to pass, although the FTP Adapter throughs an error.
I'm not sure how can I get the FTP adapter errors to be passed back to my integration process. I already searched in the service market place for OSS notes and also searched the SDN but I can't find any helpful information.
There is one OSS note, 821267, that mentions the use of System Acknowledgements. I'm not sure if this will help me and I don't know how to set it up.
Does anyone have any ideas on how to handle this particular scenario? Did anyone implement System Acknowledgements with the File/FTP adapter?
Any help is greatly appreciated

Hi,
To do the alert configuration as suggested, please go through the information below.
From SP 14 on PMI-free alerting was introduced. That means before SP 14 one has to configure and activate the End-to-End Monitoring, and to schedule the report SXMSALERT_PROCESS_DATA_GET in order to extract the alerts from the PMI data. For SP 14 and higher, that's not longer necessary.
If no alerts are being delivered, please check if "Suppress multiple alerts of this rule" is checked for your rule.
For SP 14 and higher you could also have a look at the report sxmsalert_logreader. This report shows some information about alerts being created or not.
You'll find more information about trouble shooting the alerting in SAP Note 913858.
Also just check if this batch program (RSALERTPROC) is running or not.
The links below on Alert Management (ALM) will be of good help to you:
http://help.sap.com/saphelp_nw04/helpdata/en/3f/567ddea69d3d4c93a6aedabd08899e/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/3f/81023cfa699508e10000000a11402f/frameset.htm
Meanwhile look at these forum threads also:
Alerts not getting triggered from Adapter Framework
Alert Configs...
Also, In ALRTCATDEF, go to SETTINGS--> CONFIGURATION. By default, the option selected is INTERNAL PROCESSING. Select the option SMTP FORWARDING AS XML and give the email id. This will enable you to send an email alert whenever an error occurs in XI.
I hope I have answered your queries. If u want help with anything else please do reply back.
Regards,
abhy
PS: AWARD POINTS FOR HELPFUL ANSWERS.

FTP Adapter Errors out while translating

Hi,
I am using a FTP adapter to put a text file using a bpel process. But the FTP adapter errors out with the following error:oracle/xml/parser/schema/XMLSchema
Is there a way to fix this issue?? Please advise.
Thanks
PS

Hi,
To do the alert configuration as suggested, please go through the information below.
From SP 14 on PMI-free alerting was introduced. That means before SP 14 one has to configure and activate the End-to-End Monitoring, and to schedule the report SXMSALERT_PROCESS_DATA_GET in order to extract the alerts from the PMI data. For SP 14 and higher, that's not longer necessary.
If no alerts are being delivered, please check if "Suppress multiple alerts of this rule" is checked for your rule.
For SP 14 and higher you could also have a look at the report sxmsalert_logreader. This report shows some information about alerts being created or not.
You'll find more information about trouble shooting the alerting in SAP Note 913858.
Also just check if this batch program (RSALERTPROC) is running or not.
The links below on Alert Management (ALM) will be of good help to you:
http://help.sap.com/saphelp_nw04/helpdata/en/3f/567ddea69d3d4c93a6aedabd08899e/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/3f/81023cfa699508e10000000a11402f/frameset.htm
Meanwhile look at these forum threads also:
Alerts not getting triggered from Adapter Framework
Alert Configs...
Also, In ALRTCATDEF, go to SETTINGS--> CONFIGURATION. By default, the option selected is INTERNAL PROCESSING. Select the option SMTP FORWARDING AS XML and give the email id. This will enable you to send an email alert whenever an error occurs in XI.
I hope I have answered your queries. If u want help with anything else please do reply back.
Regards,
abhy
PS: AWARD POINTS FOR HELPFUL ANSWERS.

FTP FOLDER ERROR IN WINDOWS 8.1

Namasthae!
Recently I upgraded from Windows 8 to Win 8.1 Single Lang. and then my problem started with access of view ftp sites in file explorer through ie 11.
When I am using ie 10 there was no problem with my office LAN ftp sites. When my PC was automatically upgraded to Windows 8.1 with Internet Explorer 11, the optional button i.e., view ftp sites in file explorer was not working and No. of solutions
which I tried through Microsoft sites and forums...No Use.
When I click to view my LAN ftp sites in file explorer view its open separate window and shows one error message:
FTP FOLDER ERROR
Kindly fix this immediately please. In past I represented the same issue in the forum but still I have not get any solution to my problem.
please fix this.
Thanks in Advance
My Mail ID: [email protected]

I'd ask the experts over here.
http://answers.microsoft.com/en-us/ie/forum/ie11-iewindows8_1?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1388590925002
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Batch Capture : Timecode Error?

So I am attempting to capture my first video onto FCP from my Canon XL. I have about 5 minutes of video and I have logged the info for each clip. They are all in my "Bin 1" and it is set as a "logging bin." The first logged clip that i want it to capture i have marked the "In Point" at 00:00:00;00 and the "Out Point" at around 00:01:09;24. The rest of my 11 clips just go in order (i.e. 2nd clip: In = 00:01:09;25 etc...). After doing all of this I click on "Batch" under the "Capture" option, a big black screen pops up over my FCP with the capture info underneath the black screen in a gray strip. My camera then rewinds to the beginning and STOPS. I then have to sit and wait for anythin to happen, my camera still saying "STOP," and then a message pops up reading the following:
Batch Capture: Timecode Error: Unable to locate the specified timecode. You may have specified a timecode with insufficient room for a pre/post roll operation.
I have no idea what this means and I am beginning to get impatient with capturing my video. In the Log and Capture window, the tab that says Logging, i did not mess with the "Markers." I don't know if this matters.
Any help would be GREATLY appreciated so that I can start editing my project with this wonderful software otherwise.
God bless,
|-(|:^D
`

In standard trim, FCP needs at least 5 seconds preroll before capturing. The preroll is so the tape can get up to speed, the heads read timecode accurately and so on. You have discovered what happens when you give it no oppertunity to sort itself out.
The simple answer for your current situation is to set your first in point 10 seconds after the start of the time code. Be sure to make sure your last clip's OUT point is 10 seconds or more before the end of time code or you can have problems at that end of the capture as well.
The long term answer is next time let the camera run for a minute or two before you start recording anything you will want to keep. The same is true for the end of the tape - let it run for another half minute or so.
Cheers,
x

Batch Export Filename Errors

When doing a batch export I receive a message:
"Batch Export Filename Error
The output filename for this item already exists for another item in the export queue.
To continue the export, enter a new base output filename below and select ok."
I then have to assign some random file name for each or the default mattes and titles in my timeline that are all named “color,” "Title 3D." So I am naming them “color1” “color2” etc. I just went through naming a ton of them and now it is asking me the same questions again!
How can I avoid all of this?
Thanks for your help!

I have 4 tracks in the timeline:
V4: Title 3D
V3: Color (it is a black matte)
V2: Video clip
A3: audio
A4: audio
The video is cut into clips and I have copied-and-pasted many instances of the title and color clips so that it continuously plays during the duration of all of the video.
I did a select all of the timeline and dragged everything to a new bin and did a batch export.
Should I be doing this another way???? It just keeps asking me to rename the filenames over and over again and never gets anywhere.

Failed to send batch after max errors - Snapshot

I have been replicating happily between 2008 R2 SQL Servers for some time using Transactional replication.
Replication stopped yesterday with the following messages on the source server:
MSSQL_ENG 10054
Communication link failure
MSSQL_ENG 10054
TCP Provider: An existing connection was forcibly closed by the remote host.
MSSQL_ENG Failed to send batch after max errors
MSSQL_ENG Unspecified error
MSSQL_ENG An existing connection was forcibly closed by the remote host.
MSSQL_REPL 0
The process could not bulk copy into table '"pro"."ZZM012X"'.
In the Event Viewer on the target server this message appears:
"A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 10054, output error: 0)."
So this happened after it had been replicating for some time. I get the same error now when I try to restart it or if I rebuild the publication/subscription completely.
There are 7 tables in the publication - 6 of them bulk copy and then replicate without issue. The error is specific to one table. The table has a column in that is varchar(132) and it contains recipe instructions to our manufacturing plant. If
I replicate the table and exclude this field, it doesn't fail. I initially thought it might be spurious characters in the text column but I have removed these and still get the same error. I have set up a test version of the table and publication/subscription
to enable me to test outside of the live environment. Same errors occur.
Does anyone have any clues or pointers to what might be causing it?
Many thanks
Les

Hi - Thanks for the response.
I have tried numerous tests to try to pinpoint the issue but I am still unable to resolve it. The source server is in Connecticut and the target is in the UK. I have successfully bulk copied and replicated the problem table from the source server
to a new database on the same server. I get the same error if I bulk copy and replicate to another server here in the UK. I have backed up and restored the table in a new database on one of the UK servers and can bulk copy and replicate here to
a second UK server. I have traced the issue to one column, varchar (132) on the problem table. If I exclude the column the table will bulk copy and replicate US to UK. I have created new tables and inserted a subset of the data - no change.
We have looked at network issues also: We have switched off the TCP Global Parameters like Chimney offload and NETDMA - on the adapter and in the OS - as these are reported as a potential problems. We have looked at settings in SonicWall and
tried disabling Intrusion Prevention Service, Anti Virus, Application Control and Anti Spyware. Our next option is to look at MTU packet size to see if that is a possible cause.
We are stumped on this one and have had to exclude the table completely from our manufacturing software which is not ideal but at least keeps us working.
Any further ideas, suggestions or solutions would be gratefully received.

Desired wbs/batch not found error

Hi all,
while doing transfer posting, we are getting a error as DESIRED WBS/BATCH NOT FOUND error. what might be the problem.

Hi,
Could you please add some details?
Are you trying to settle PM work orders?
Regards
Carlos

Can you ftp 425 error

Can someone help me, I can not upload my pages on Dreamweaver. I keep getting a ftp 425 error say Can't open date conection. How can I fix this

Hello,
this could help you:
http://geekswithblogs.net/Lance/archive/2008/01/24/ftp-error-425-quotcant-open-data-connec tion.quot.aspx
Hans-Günter

Jcaps6 repository sqlserver eway error

Hello,
After deploying a repository with a sqlserver eway I get this error.
Caused by: java.sql.SQLException: SQLSERVERADPTR-0042: Failed opening a database session: java.sql.SQLException: Error in allocating a connection. Cause: Class name is wrong or classpath is not set for : com.SeeBeyond.sqlserver.jdbcx.sqlserver.SQLServerDataSource
The eway is installed. Any idea why I am getting this?
Rupert

Hi Nyanga,
The migration tools can be used to migrate to Oracle 9i.
But we try and keep the conversion compatible with Oracle XE / Oracle 10g and up.
So you may have issues migrating to Oracle 9i like you said, with he sqlserver_utilities package and using 10g syntax.
Creating the repository on Oracle 9i is not supported.
But even if you did succeed , it would not change how the conversion was done. You would still end up with an identical sqlserver_utilities package which was generated using the migration repository on an Oracle 10g database. sqlserver_utilities package definition itself is fixed within a file so regardless of the repository used the same one will be generated.
Oracle XE can be used of course as the repository and its free to download and use.
Regards,
Dermot.

IDOC to FTP File - Error : SAP:Stack No receiver agreement found for send

Hello Friends,
I need to configure a senario Idoc to FTP File, Í did required settings in R3 and in PI... , did mapping and configuratino in PI... and when I send my idoc I got error msg in monitor
<SAP:Stack>No receiver agreement found for sender ,BMG_ASN_File_Component to receiver ,GTN_224,http://adis-bmg.de/asn,SI_BMG_ASN</SAP:Stack>
I search the fourm but did not got my answer, me just a bit confused...
In my senario I have having followings:
1. Bussiness System ( RFT : sender R3 system). ( I have define a party and make a connection under Idoc Partner )
2. Bussiness Component ( ZTEST_COMP as on Reciever side is File Server, so I define the reciver as bussiness component )
3. Communicatin Channel
    File with protocol FTP having communicatin component as my Bussiness Component ( reciver ). there I defied the required info for FTP
4. Reciever Determination
    Sender:
    - RFT
    - Idoc-Interface
    - urn:sap-com:document:sap:idoc:messages
   Reciever
    communication party = space
    communicatin component = ZTEST_COMP
    Configure Reciever:
   There I again define the communication component as ( ZTEST_COMP)
5. Interface Determination
    -RFT
    - Idoc-Interface
    - urn:sap-com:document:sap:idoc:messages
   Reviever:
    ZTEST_COMP
and define the mapping which I did in design ( although I have seen some threads where mentioned we dont need maaping in this case ) ?
6. Reciver agrement
sender:
- RFT
Reviver:
- ZTEST_COMP
- SI interface ( SI_BMG_ASN )
- http://test-etc.de/asn
and included my CC for file .....
Now when I send Idoc I got error msg that Reciver is not found : am I dong something wrong ? do I have to defien a bussiness system instead of Bussiness Component ?
Pls suggest...

( I have define a party and make a connection under Idoc Partner
Do you really need a party in your communication? Should it not be a partly-less communication.
In the receiver agreement ensure that you have included the inbound message interface.
communication party = space
No need to give any space.
In the Interface Determination i hope that you have included the receiver meessage interface and then the corresponding Interface Mapping.
If still not works then make some dummy changes and again activate....correspondingly check the cache status of the ID-objects
Regards,
Abhishek.

FTPs connection error:When using Variable substitution for Directory path

Hi
I am transferring data from BI to xml file via PI: Here a Client proxy from BI sends the data to PI and the PI FTPs the XML file to a remote location. For FTP I am using FTPs SSL connection.
It was working fine untill I used Variable susbstitution to determine Directory path dynamically. I am using this because different xml files are intended to goto the different locations.
I did the variable substitution like this:
Target Message Structure:
---> Target Directory: %var1%
<?xml version="1.0" encoding="UTF-8" ?>
<MT_BI_EXTRACT_FILE>
<Header>
<Directory>/Customer</Directory>
</Header>
<Detail>
</Detail>
</MT_BI_EXTRACT_FILE>
And in the variable substitution I am doing it this way
payload:MT_BI_EXTRACT_FILE,1,Header,1,Directory,1
And the error I am getting is:
Attempt to process file failed with Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: iaik.security.ssl.SSLException: Peer sent alert: Alert Fatal: handshake failure
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: iaik.security.ssl.SSLException: Peer sent alert: Alert Fatal: handshake failure
Exception caught by adapter framework: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: iaik.security.ssl.SSLException: Peer sent alert: Alert Fatal: handshake failure
Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: iaik.security.ssl.SSLException: Peer sent alert: Alert Fatal: handshake failure.
Does anybody have some Idea of this ??
Regards
Naina

Hi,
I guess the problem is not with Variable Substitution..
Error when getting an FTP connection from connection pool:
So its a connection problem..
Also check the option Disable Security check and try again...
Try to check again if the interface is executing properly without Variable substitution and let us know..
Babu
Edited by: hlbabu123 on Jan 7, 2011 2:46 PM

FTP connection error whil,e using flat file adapter error

while using file adapter in the reciever end for proxy to file
i am giving paranters like server IP address and the port , i dont know which port to give by default it is giving me 21 , anyway how to check whether the connection is correct
and more over
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: ConnectException: Connection timed out: connect
please help me in this thanks

HI Sridhar ,
First check wether server started or not and then check you are connecting to FTP server by
go to run -> cmd and write ping and ipaddress which is used and see whether u r getting reponse from teh FTP server.
Try to login to the ftp server which you have mentioned in CC using the user name and pwd, to chk whether you have the permissions to login to the server.
Also the check whether the folder you are trying to access is having permission for delete/read/write.
Restart the FTP server and try it again.
Regards
Sridhar Goli

Sender File Adapter - FTP Connection Error 530

Need help!!!
I am getting the following error in XI when I try to connect to an ftp server.
"An error occured while connecting to server xxx.xx.x.xx:xx. The FTP server returned the following error message:'com.sap.aii.adapter.file.FTPEx: 530 Can't open passive connection---(4013)'. For details, contact FTP server vendor"
When I try the FTP connection on the OS level I am able to log in, but through XI I am unable to.
Has anyone seen this error before?

I have seen Error Code 530 earlier, it is typically related to login related issues.
Check if the user mentioned in the Comm Channel has the correct password and read as well as write rights on the Server.
The most likely problem is with the User Credentials or Authorizations

Batch FTP eWay Error

Similar Messages

Maybe you are looking for