Batch Input in RF programming

Hi,
I have a couple of questions on RF programming....
1. Batch Input
I was always under the impression that we should NOT use BDC in RF screens but, while searching SDN, I saw Rich Heilmann mention that he does it ([SDN Thread|Re: Radio Frequency - Error handling]). Most regular SDN people will know that Rich knows a thing or two about RF so could anyone confirm if it is OK or not to use BDC in RF?
2. Is it okay to use 'Call Function .... in Update Task' in RF?
Thanks.

Just a quick answer - I don't know if it will help.
We've used a combination of BDCs and call functions.  We have not used in update task.   We would like to get real time data quickly.  I can't see any reason why it would be a problem.  Unless you have transactions that depend on that data and it hasn't been updated.

Similar Messages

  • How to process batch input session through program

    Hi Friends,
    I am getting 5 batch input sessions in SM35,but  I want to process these all sessions through program without going to SM35.
    How it is possible through Program?
    Please Guide me!
    Thanks,
    Yogesh

    Hi,
    It's the report to run the batchinput sessions.
    When you create to B.I. session, you can execute it by transaction SM35 (but it uses rsbdcsub) or rsbdcsub.
    For example you can use it in the same program where you create B.I.:
    Here the code to fill the structures of FI batch input
    standard....
    ...here it creates session...
    SUBMIT RFBIBL00 WITH DS_NAME = VA_FILE
    WITH CALLMODE = CALLMODE AND RETURN.
    ....here it runs session....
    SUBMIT RSBDCSUB WITH MAPPE = P_NAME
    WITH VON = SY-DATUM
    WITH BIS = SY-DATUM
    WITH FEHLER = ' '
    TO SAP-SPOOL
    LIST NAME P_NAME
    LIST DATASET P_NAME
    COVER TEXT P_NAME
    NEW LIST IDENTIFICATION ' '
    EXPORTING LIST TO MEMORY
    AND RETURN.
    regards,
    Shiva.

  • How to get the session name of a batch input

    hi everybody
    does anybody know how to get the session name of a batch input?
    I have to put the name of the session at the end of my program so that the user can click on the session name to go directly to SM35 to run the batch input when the program ends

    Hi sia,
    1. Table is APQI
    2. field name for session name is GROUPID
    regards,
    amit m.

  • Batch input from sproxy

    Hi
    I want to use batch input to clear field in vl02n(dleivery),when the batch input is called from sproxy(XI) there is mix in the screens and he oesn't find the field in the batch input screen and therfore doesn't clear the field.
    When i copy the batch input to other program its works( not using sproxy ).
    How i can solve the problem?
    Thanks
    Have a nice day

    Hello,
    have you tried to record the Batch Input via Transaction SM35 and create a function module out of it?
    Regards
    Gregor

  • RFUMSV50- Error during batch input session

    Hello Experts,
    I am getting an error after creation of batch input session for program RFUMSV50.
    If I run the session in foreground it gives velow error
    program successfully worked 3 months back without any error but after that I am facing this type of issues.
    Can anyone please guide what exactly missing in the configuration.
    Regards,
    ps

    Hi Salvatore,
    I'm in the same situation. I execute a BI, but it stops after a waring appears.
    If I proceed the transaction manually, the warning appears, but if I press ENTER the transaction ends successful.
    Did you solved your Problem or did you have an hint for me.
    Kind regards
    Yvonne Adler

  • Batch input for BAPI_GOODSMVT_CREATE - Transfer posting

    Hi all,
    I'm now trying to do a batch input in this program for transfer posting of stocks.
    Am i able to upload the input through an external source for example, Excel spreadsheet?
    May i know how do i indicate in the program the source of my batch input?

    Hello Calibertto,
    You can upload excel file for batch input or bapi.
    Firstly : Upload to excel file.
    Secondly : Append itab from excel file.
    Thirdly : Make loop at itab.
    Finally : Fill batch input/bapi for every itab record.
    Best regards.

  • LSMW Routing Standard Batch Input Create Batch Input Session

    Hello All,
    I am using LSMW for routing upload, using standard batch input method. Program RCPTRA01.
    I am facing this quite peculiar problem.
    I have tried first with separate text file for every source structure. Everything works fine till convert data step.
    But when I go for 'Create Batch Input Session' it creates session for tables MAPL, PLKO, PLPO, PLMZ, PLMK. Other tables remain balnk (EAPL, PLFL, PLAB, PLFH, PLPH, PLFT, PLFV, PLWP). Because of this while running the session only the header and material assignment to task list get uploaded. Rest data, operation, MIC, component allocation do not get uploaded.
    I have also tried for one text file for multiple structure. In that I face porblem for BDC creation. While debugging I faced th same thing in this also.
    Could anyone please explain me the soution for this? Do I need to amend any progrm fior this?
    Expecting lightning fast replies from Gurus....
    Mimiri

    Hello All,
    I am awaiting your reply on this.......
    Mimiri

  • How to check whether a batch input session is completed in ABAP program

    I have created a ABAP program to create a batch input session (reference to RSBDCSUB). After the creation of the batch input session, I kick it to start and read the execution log. However, sometimes I cannot read anything from the execution log as the execution of the batch input is a synchronized process to the execution of my program, i.e. at the time being that I try to read the log of a particular transaction, that transaction is being processing / haven't start processing.
    How can I check whether a batch input session is completed in the program?
    The code that corresponding to the triggering of batch input session:
    SUBMIT (SUBREPORT)
       USER MTAB-USERID
       VIA JOB MTAB-GROUPID
       NUMBER JNUMB
       WITH QUEUE_ID  EQ MTAB-QID
       WITH MAPPE     EQ MTAB-GROUPID
       WITH MODUS     EQ 'N'
       WITH LOGALL    EQ LMODUS
    Or is there any method to wait here until the process is completed before further processing?

    Hi gundam,
    1. Or is there any method to wait here until the process is completed before further processing?
    There is no such direct method to wait.
    2. Immediately after submitting in background,
       we cannot wait
      neither can we LOOP and go on detecting
      whether the b/g process has completed or not !
    3. To over come such problems,
      we have to use another technique.
    4. we have to submit another
       job which will get triggered
       on event SAP_END_OF_JOB
       ie. when the original job will finish,
      our new job will AUTOMATICALLY get triggered,
    5. This new job / program
       will do the FURTHER actions !
    regards,
    amit m.

  • BDC programming using Batch input Session.

    Hello Experts.
    I'm an ABAP beginner. I've benn practicing BDC programming using Batch input Session
    at the moment.
    This is the program that upload Local file which has plural records, and put the records into a Session.
    These are the records.
    413459,KIM EI HWAN121                ,19810607,MIADONG1234
    423459,KIM EI HWAN122                ,19810607,MIADONG1235
    433459,KIM EI HWAN123                ,19810607,MIADONG1236
    443459,KIM EI HWAN124                ,19810607,MIADONG1237
    453459,KIM EI HWAN125                ,19810607,MIADONG1238
    463459,KIM EI HWAN126                ,19810607,MIADONG1239
    I succeeded making Session.
    However, for some reaseon, every record in the Session has got the same, value which is the first record.
    Why is this happening? And How can I correct the code below?
    REPORT ZBCUSER002_BATCH NO STANDARD PAGE HEADING
                            LINE-SIZE 255
                            MESSAGE-ID ZBATCH.
    = Types definition ===================================================
    TYPES: BEGIN OF TYP_LOCAL,               "For Local file upload
             RECORD(200) TYPE C,
           END   OF TYP_LOCAL.
    = Internal table definition ==============================================
    DATA: BEGIN OF BDC_TAB OCCURS 0.        "BDCDATA itab
            INCLUDE STRUCTURE BDCDATA.
    DATA: END   OF BDC_TAB.
    DATA: BEGIN OF MESSAGE_BDC OCCURS 0.    "Message itab
            INCLUDE STRUCTURE BDCMSGCOLL.
    DATA: END   OF MESSAGE_BDC.
    DATA: TBL_LOCAL TYPE STANDARD TABLE OF TYP_LOCAL,  "Local file itab
          F_TBL     TYPE FILETABLE.                    "FILETABLE fot local
    = Structure table definition =========================================
    DATA: STR_F_TBL LIKE LINE OF F_TBL,                "FILETABLE structure
          STR_LOCAL TYPE TYP_LOCAL.                    "Local file structure
    = Variable definition ================================================
    DATA: LV_RC     TYPE I,                            "Method parameter
          ENUMBER   TYPE ZT601-ENUMBER,                "Employee number
          NAME      TYPE ZT601-NAME,                   "Employee name
          BIRTH     TYPE ZT601-BIRTH,                           "Birthday
          HOMETOWN  TYPE ZT601-HOMETOWN,                        "Hometown
          SYSVAL    TYPE SY-SUBRC.                     "System valuible
    = Constants definition ===============================================
    CONSTANTS: TBL_NAME(10) TYPE C VALUE 'ZT601'.      "Table name ZT601
    = Parameters definition ==============================================
    PARAMETERS: F_NAME      TYPE RLGRAP-FILENAME OBLIGATORY,    "File path
                EXECMODE(1) TYPE C.                    "Execute mode
    INITIALIZATION
    *----- Initialize all valuables, structures and internal tables
    CLEAR: LV_RC,
           STR_F_TBL,
           STR_LOCAL,
           ENUMBER,
           NAME,
           BIRTH,
           HOMETOWN.
    REFRESH: F_TBL,
             TBL_LOCAL.
    AT SELECTION-SCREEN
    *----- When the button next to Parameter 'F_NAME',
    *----- File dialog open.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR F_NAME.
      CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
        EXPORTING
          WINDOW_TITLE            = 'SELECT FILE'
          DEFAULT_FILENAME        = '*.TXT'
       CHANGING
         FILE_TABLE               = F_TBL
         RC                       = LV_RC
        EXCEPTIONS
          FILE_OPEN_DIALOG_FAILED = 1
          CNTL_ERROR              = 2
          OTHERS                  = 3
    *----- system valiable check.
    *----- If done properly,
    *----- Put the path into the File path parameter
      IF SY-SUBRC = 0.
        READ TABLE F_TBL INTO STR_F_TBL INDEX 1.
        F_NAME = STR_F_TBL.
    *----- If not done properly, show message
    *----- An error occured while getting file path then end program
      ELSE.
        MESSAGE E000.
      ENDIF.
    *----- Execute code can only be A or N.
    AT SELECTION-SCREEN ON EXECMODE.
      IF EXECMODE <> 'A' AND EXECMODE <> 'N'.
        MESSAGE E001.
      ENDIF.
    START-OF-SELECTION
    START-OF-SELECTION.
    *----- Upload Local file of file path parameter.
      CALL FUNCTION 'GUI_UPLOAD'
           EXPORTING
                FILENAME                = F_NAME
                FILETYPE                = 'ASC'
           TABLES
                DATA_TAB                = TBL_LOCAL
           EXCEPTIONS
                FILE_OPEN_ERROR         = 1
                FILE_READ_ERROR         = 2
                NO_BATCH                = 3
                GUI_REFUSE_FILETRANSFER = 4
                INVALID_TYPE            = 5
                OTHERS                  = 6.
    *----- System valiable check.
    *----- If not done properly, show an error message
    *----- An error occured while uploading local file then end program
      IF SY-SUBRC <> 0.
        MESSAGE E002.
      ENDIF.
      PERFORM BDC_OPEN.
    *----- Loop Internal table
      LOOP AT TBL_LOCAL INTO STR_LOCAL.
    *----- Spilt the file record and put them into each valiable.
        SPLIT STR_LOCAL AT ',' INTO  ENUMBER
                                     NAME
                                     BIRTH
                                     HOMETOWN.
    *----- Data check Function module
        CALL FUNCTION 'DATE_CHECK_PLAUSIBILITY'
             EXPORTING
                  DATE                      = BIRTH
             EXCEPTIONS
                  PLAUSIBILITY_CHECK_FAILED = 1
                  OTHERS                    = 2.
    *----- When error occurs while checking date, show an error message.
    *----- (&1) is not date
        IF SY-SUBRC <> 0.
          MESSAGE E003 WITH BIRTH.
        ENDIF.
    *-- The first screen of SE11
    *----- Screen number 0102 of program id SAPMSRD0
        PERFORM BDC_DYNPRO      USING 'SAPMSRD0' '0102'.
        PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                      'RSRD1-TBMA_VAL'. "Field on Cursor
        PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                      '=SHOW'.          "Display button
        PERFORM BDC_FIELD       USING 'RSRD1-TBMA'
                                      'X'.
        PERFORM BDC_FIELD       USING 'RSRD1-TBMA_VAL'
                                       TBL_NAME.                "ZT601
    *-- Table definition screen
    *----- Screen number 2000 of program id SAPLSD02
        PERFORM BDC_DYNPRO      USING 'SAPLSD02' '2000'.
        PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                      'DD02D-TABCLTEXT'.  "Field on Cursor
        PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                      '=TDED'.            "Create entry
        PERFORM BDC_FIELD       USING 'BDC_SUBSCR'
                                      'SAPLSD02'.
        PERFORM BDC_FIELD       USING 'BDC_SUBSCR'
                                      'SAPLSED5'.
    *-- Data input screen
    *----- Screen number 0101 of program /1BCDWB/DBZT601
        PERFORM BDC_DYNPRO      USING '/1BCDWB/DBZT601' '0101'.
        PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                      'ZT601-CRUSER'.    "Field on Cursor
        PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                      '=SAVE'.                  "Save
        PERFORM BDC_FIELD       USING 'ZT601-MANDT'
                                      SY-MANDT.                 "Client
        PERFORM BDC_FIELD       USING 'ZT601-ENUMBER'
                                      ENUMBER.           "Employee number
        PERFORM BDC_FIELD       USING 'ZT601-NAME'
                                      NAME.              "Employee name
        PERFORM BDC_FIELD       USING 'ZT601-BIRTH'
                                      BIRTH.                    "Birthday
        PERFORM BDC_FIELD       USING 'ZT601-HOMETOWN'
                                      HOMETOWN.                 "Hometown
        PERFORM BDC_FIELD       USING 'ZT601-CRDATE'
                                      SY-DATUM.          "System date
        PERFORM BDC_FIELD       USING 'ZT601-CRTIME'
                                      SY-UZEIT.          "System time
        PERFORM BDC_FIELD       USING 'ZT601-CRUSER'
                                      SY-UNAME.          "System user
    *-- Data input screen (After input)
    *----- Screen number 0101 of program /1BCDWB/DBZT601
        PERFORM BDC_DYNPRO      USING '/1BCDWB/DBZT601' '0101'.
        PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                      '/EBACK'.                 "Back
        PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                      'ZT601-CRUSER'.    "Field on Cursor
    *-- Table definition screen]
    *----- Screen number 2000 of program SAPLSD02
        PERFORM BDC_DYNPRO      USING 'SAPLSD02' '2000'.
        PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                      'DD02D-TABCLTEXT'.  "Field on Cursor
        PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                      '=WB_BACK'.               "Back
    *-- The first screen of SE11
    *----- Screen number 0102 of program SAPMSRD0
        PERFORM BDC_DYNPRO      USING 'SAPMSRD0' '0102'.
        PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                      'RSRD1-TBMA_VAL'.   "Field on Cursor
        PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                      '=BACK'.
        PERFORM BDC_FIELD       USING 'RSRD1-TBMA'
                                      'X'.
        PERFORM BDC_FIELD       USING 'RSRD1-TBMA_VAL'
                                      TBL_NAME.
        PERFORM BDC_INSERT.
      ENDLOOP.
      PERFORM BDC_CLOSE.
          FORM BDC_DYNPRO                                               *
          Put Program-Id, Dynpro screen number, Start point
          into DBCDATA
    -->  PROGRAM                                                       *
    -->  DYNPRO                                                        *
    FORM BDC_DYNPRO USING PROGRAM DYNPRO.
      CLEAR BDC_TAB.
      BDC_TAB-PROGRAM  = PROGRAM.
      BDC_TAB-DYNPRO   = DYNPRO.
      BDC_TAB-DYNBEGIN = 'X'.
      APPEND BDC_TAB.
    ENDFORM.
          FORM BDC_FIELD                                                *
          Put Field Name and Value into BDCDATA
    -->  FNAM                                                          *
    -->  FVAL                                                          *
    FORM BDC_FIELD USING FNAM FVAL.
      CLEAR BDC_TAB.
      BDC_TAB-FNAM = FNAM.
      BDC_TAB-FVAL = FVAL.
      APPEND BDC_TAB.
    ENDFORM.
          FORM bdc_process                                              *
    FORM BDC_OPEN.
      CALL FUNCTION 'BDC_OPEN_GROUP'
           EXPORTING
                CLIENT = SY-MANDT
                GROUP  = 'Testsession'
                KEEP   = 'X'
                USER   = SY-UNAME.
      IF SY-SUBRC <> 0.
        MESSAGE E006 WITH SY-SUBRC.
      ENDIF.
    ENDFORM.
          FORM bdc_insert                                               *
    FORM BDC_INSERT.
      CALL FUNCTION 'BDC_INSERT'
           EXPORTING
                TCODE            = 'SE11'
           TABLES
                DYNPROTAB        = BDC_TAB
           EXCEPTIONS
                INTERNAL_ERROR   = 1
                NOT_OPEN         = 2
                QUEUE_ERROR      = 3
                TCODE_INVALID    = 4
                PRINTING_INVALID = 5
                POSTING_INVALID  = 6
                OTHERS           = 7.
      IF SY-SUBRC <> 0.
        MESSAGE E007 WITH SY-SUBRC.
      ENDIF.
      CLEAR: BDC_TAB.
    ENDFORM.
          FORM bdc_close                                                *
    FORM BDC_CLOSE.
      CALL FUNCTION 'BDC_CLOSE_GROUP'
           EXCEPTIONS
                NOT_OPEN    = 1
                QUEUE_ERROR = 2
                OTHERS      = 3.
      IF SY-SUBRC <> 0.
        MESSAGE E008 WITH SY-SUBRC.
      ENDIF.
    ENDFORM.

    God I forgot to refresh Internal table after putting record into Session.
    Now I'm done.
    You guys be careful too.

  • How to process a batch input session directly from the program

    Hi,
    I have developed a program which will create a batch input session.
    When the program is executed, the session should get processed . ie. the user need not have to go to sm35 to process the session. I am facing some problem in this.
    I am using BDC_INSERT by passing the tcode . The session is getting processed, but when i go to sm35, i noticed that the session is still listed under the "New" tab instead of the "Processed" tab.
    Also I am not getting the final window with the buttons " Session overview" and "Exit Batch Input".
    Please help me out in this.

    Hi
    U have to submit the program RSBDCSUB:
    SUBMIT RSBDCSUB WITH MAPPE = <session>
                    WITH VON   = SY-DATUM
                    WITH BIS   = SY-DATUM
                    WITH FEHLER = ' '
                        EXPORTING LIST TO MEMORY
                                        AND RETURN.
    Max

  • Standard Batch Input Programs for Profit Center Creation

    Dear all;
    I am in 4.0B version that doesnt have BAPI_PROFITCENTER_CREATE. Writing a BDC for this would be complicated as my data is compiled in a different way.
    Are there any Standard Batch Input Programs for Profit Center Creation ?

    Hi Srivathsan,
    You can make use of  Standard BAPI by LSMW.
    Business Object   BUS1116      Profit Center Group
    Method                CREATE                      Create
    Message Type      PROFITCENTERGROUP_CREATE   
    Basic Type           PROFITCENTERGROUP_CREATE
    Regards,
    Sivaram.

  • Batch Input enhancement in ABAP program

    Hi,
    I want to know if it's possible to enhance an existing batch input session with an ABAP program.
    this session is created by a program and I want that another program enhances this session.
    thanks in advance for your help.
    Franck

    This is possible - The BDC data is stored in SAP tables and there are options in SM35 to download a BDC session to a text file, or upload one.  I suggest you have a look at the code behind these options for functions etc that you can use to get an existing session.  Once you have the data you just need to modify it and write it as a new session.
    Andrew

  • LSMW Standard Batch Input Program

    Hi,
    I have one requirement on creating BOM.
    I have to upload data from legacy system to SAP for T-Code ' CS01'
    I have to use the Standard Batch input Program 'RCSBI010'.
    I have source structure and Target Structure.
    In Source structure i have Header and item data.
    In Header i have 11 fields and in Item i have 23 fields.
    In Target Structure i have upto 130 fields.
    In the Standard program who have 4 structures and each structure have fields.
    So How many  fields i have to map with Standard structure. and in my source structure i dont have the fields like T-code, session name, user name,and xkeep.
    So how to pass these fields (T-code, session name, user name,and xkeep) to the standard structure. and is it necessary to pass these fields to the standard batch input program.
    Advance thanks,
    Kumar A

    Hi,
        Hi,
    Record type 0: one session record (structure BGR00) per session..
    The session header contains general administrative data on the batch input session to be created. All records that follow the header in the sequential file are assigned to the current session, until the next header occurs in the file.
    Record type 1: one session record (structure BICSK) for each BOM
    The BOM header record contains the transaction code (for example, CS01 Create material BOM) and the header data
    Record type 2: one item record (structure BICSP) per item
    All BOM item records are assigned to the preceding BOM header, until the next BOM header or session header occurs in the sequential file
    Record type 3: one sub-item record (structure BICSU) per sub-item
    All BOM sub-item records are assigned to the preceding BOM item, until the next item header, BOM header, or session header occurs in the sequential file
    and x-line which will be used as index while retreiveing
    and the file to be imported should contain values in this format
    BGR00 data will be in first line (0-stype)
    BICSK in second line (1 stype)
    BICSP in 3rd line
    BICSU in 4th line
    e.g:
    0 sessname 800
    1 CS01 123
    2 values req
    3 values req
    Hope this gives u some idea...
    <b>Reward points</b>
    Regards

  • Standard batch input program for Routing

    Hi,
    Please inform me if there is any standard batch input program for uploading routing data.
    Regards
    Ramakanth

    Hi
    Pls check RCPTRA00

  • Batch Input file is not created for the program RFUMSV00 (VAT)

    Dear All,
    Yesterday we run the program RFUMSV00 for posting VAT entries. But program dosnt created any batch input file. We tried to create the file once again by running the program, but there were no data;s on it.
    I can able to view the spool which is created in SM37. It is in the finished status.
    Can you please advice, do I need to delete any table entry for this like BSET etc....or how I can create the batch file again by ruuning the program. I dont want to post manually through FB41 transaction.
    Is there any Standard SAP solution for this.
    Please let me know anybody need any clarification about this question.
    Thanks in advance.
    Regards,
    Raja.A
    Edited by: Raja.A on Dec 1, 2009 12:47 PM

    Hi,
    Check the status of the batch in SM35 transaction.
    if the batch is locked by mistake or any other error, now you can release it and aslo you can process again.
    To Release -Shift+F4.
    Also you can analyse the job status through F2 button.
    Bye

Maybe you are looking for