Batch number as po number

hello all,
i have a requirement like in place of batch number i need to print po number either while creating po or while shiipping so i need the exit for that .

Hi,
Please search for the correct Exit below and use.
I am sure using an EXIT we can do this.
Develop Enhancements for Purchasing
In this step, you develop enhancements for Purchasing.
The following SAP enhancements are available for the Purchasing area:
AMPL0001
User subscreen for additional AMPL data (manufacturer part number)
LMELA002
Adoption of batch number from shipping notification at time of posting of a goods receipt
LMELA010
Incoming shipping notification: adoption of item data from IDoc
LMEQR001
User exit for source determination
M06B0001
Role determination for release of requisitions
M06B0001
Changes to communication structure for release of requisitions
M06B0003
Number range and document number
M06B0004
Number range and document number
M06B0005
Changes to communication structure for overall release of purchase requisitions
M06E0004
Changes to communication structure for release of purchasing document
M06E0005
Role determination for release of purchasing documents
ME590001
Grouping of requisitions for PO split in transaction ME59
MEETA001
Determination of schedule line type (backlog, immediate requirement, forecast)
MEFLD004
Determination of earliest delivery date for checking at time of goods receipt (PO only)
MELAB001
Generation of forecast delivery schedule: realization via creation profile
MEQUERY1
Enhancement for document overview ME21N / ME51N
MEVME001
Calculation of default GR quantity and over/underdelivery tolerances
MM06E001
User exits for inbound EDI messages and outbound purchasing documents
MM06E003
Number range and document number
MM06E004
Control of import data screens in purchase orders
MM06E005
Customer fields in purchasing documents
MEREQ001
Customer's own data in purchase requisitions
MM06E007
Change document for requisitions when converting into POs
MM06E008
Monitoring of contract target value in case of release orders
MM06E009
Relevant texts for "Texts exist" indicator
MM06E010
Field selection for vendor address
MM06E011
Activation of requisition block
MM06L001
Exits for determination of ratings in vendor evaluation
MMAL0001
ALE source list distribution: outbound processing
MMAL0002
ALE source list distribution: inbound processing
MMAL0003
ALE purchasing info record distribution: outbound processing
MMAL0004
ALE purchasing info record distribution: inbound processing
MMDA0001
Default values for delivery addresses
MMFAB001
User exit for generation of releases
MRFLB001
Control items during release creation
LWBON001
Enhancement of LIS update through extension of the communication structure MCKONA (business volumes and rebate income)
LWBON003
Change settlement data for end-of-period rebate settlement before creation of settlement documents
LWSUS001
Customer-specific source determination in Retail
LMEXF001
Conditions in purchasing documents without invoice receipt
LMEKO002
Enhance communication structure KOMP for price determination
If you need BADI's  search for them in SPRO
MM-> Purchasing->Business Add-Ins' for Purchasing.
Regards,
Anji

Similar Messages

  • Batch Number with Box number

    Hello SAP Experts,
    My Client has a unique requirement, they want system to track Batch number with Box number.
    For Example if Batch number for incomming material is 123456, and if the entire quantity comes in 3 boxes, then the system should track the quantity as 123456/1 , 123456/2 and 123456/3.
    Moreover, client wants to issue the materials box wise.
    Is there any standard way of capturing this requirement.
    Reply is awaited.
    Regards
    Prabhjot Singh

    Hello,
    Is there any way, by which I can assign Internal number ranges to the Batches in this scenario.
    I have also tried to explore Handling unit management but in that case also we need to pack the material inside, but in my client's scenario they get the box from vendor and store it as it is.
    Looking for positive solution.
    Regards
    Prabhjot Singh

  • Map BATCH number corresponding to ORDER number and Material number .

    hi all,
    i want to map the BATCH number corresponding to Material Number .
    i searched tables MCHA which has two fields Material number and Batch number but it doenot have Order number.
    so how can i get Batch number as in table AFPO/AFKO i have all these three fields batch/material/order numbers.
    but the batch number column is blank for all .
    and in case of table MCHA , these is assigned batch number to every Material number .
    also i want to ask , either the Material number in both tables (MCHA AND AFPO) is same or different as i didnot found any relation to map these three field by other fields too.
    so please suggest me the Possible way to resolve this .....
    sunny

    hi dsk,
    thanks for your earliar reply,
    actually iam working on sapscript there i want to add batch number ,but i am not able to clear my doubt from where i get this.
    how can i map batch number with corresponding to PO num ber, '
    in the report i used structure vbplp with field charg"(batch num).
    also i want to know from which table i can get customer part number and Po number .
    how can i add batch num ,..
    from which table or with which field i can compare itr to get .
    sunny

  • To map batch number to serial number for inbound message type WMMBXY

    Hi Gurus,
    Can anybody guid me how to map batch number to serial number for goods receipt inbound EDI 861 message type WMMBXY  .
    And can tell me how to assign serial number in Purchase Order for serialized product for perticuler Batch number.

    hi dsk,
    thanks for your earliar reply,
    actually iam working on sapscript there i want to add batch number ,but i am not able to clear my doubt from where i get this.
    how can i map batch number with corresponding to PO num ber, '
    in the report i used structure vbplp with field charg"(batch num).
    also i want to know from which table i can get customer part number and Po number .
    how can i add batch num ,..
    from which table or with which field i can compare itr to get .
    sunny

  • How to generate an incrementing batch-number per set number of rows

    Hi,
    How could you generate an incrementing batch-number per set number of rows for a table in SQL?
    The returned result set of the SQL query should show a preceding batch number per row set and incremented by 1 for the next row set.
    Eg, you want to start the batch_number by 1 for the first three returned rows of the table and than increment by 1 for the next three rows.
    The result set would look like:
    BATCH_NO, TAB_COL1, TAB_COL2, TAB_COL3, TAB_COL4, ..
    1, ...
    1, ...
    1, ...
    2, ...
    2, ...
    2, ...
    3, ...
    3, ...
    3, ...
    etc.
    Cheers.

    Many thanks guys, I would have never thought about these options.. Yes the reason for adding the preceding batch number has to do with migrating data from a source table where we only can grab small sets of rows at the time to bring across to a target table.
    Cheers.

  • Master Batch change for serial number in stock with status "ESTO" by IQ02

    Hi,
    How  to change master batch for serial number in stock with status "ESTO" by IQ02 transaction?

    Hi Harsh,
    if this field is not ready for input you have set the stock check to '02 Error' in your serial number profile in order to ensure
    consistency between the stock data of serial numbers and inventorymanagement.
    In this case you have to do a material movement posting inMB11 with movement type 309 (material to material). Enter the new batch as batch of the receiving material. This movement will update both the master batch and the stock batch of the serial number.
    Regards,
    Mauro

  • Batch Number and Serial Number

    Hello Sap gurus,
      could you guys help me in understanding that in which scenarios (industry),we use the serial number and batch number.I know that in process industry we use the batch number(where shelf life is important) and in machine tools manufacturing company,electorinics parts manufacturing company, we use the serial number.Apart from this can you give me some examples and explain, where serial number and batch number gets used.

    hi
    batch: when a quantity (Kg, Ltr...) in lumpsum need to be identified separately in inventory, then that material is batch managed
    Advantage: each batch stock can be identified in Stores separately.
    Dis-advantage: For every transaction of this material Batch as additional parameter is to be placed in SAP.
    Serial Number: if you want to distinguish each Item (generally unit of measure will be EA, PC.. etc) in the inventory, then serial number will be used.
    Advantage: we can track the movements of each serial number of material
    Dis-advantage: every time, you need to place the serial nuber for every one quantity for movements.
    Batch & Serial Number: both to-gether can also be used to maintain the group of items classified as Batch at the same time each item can be identified through serial number. please note that lot of data (Batch & serial numbers ) to be placed for each movment.
    Batch: batch for material can be activated in Purchasing view / Plant data storage view of material master
    Serial Number: separate serial number profile need to be created and placed at work scheduling view or plant data storage view of material master.
    hope it helps
    Thanks, Jk

  • Batch  Management and serial Number Management

    Hi Friends,
    I have a an issue.
    We are using Batch management and serial number for few materials.
    While selecting F4 for checking available batch numbers and serial numbers during issues , transfer posting,stock transfer etc.., system dispalys all Batches/Serial numbers which are created for that particular material. i.e all Batches and serial numbers irrespective of whether there are stocks available , whether they are cancelled/deleted will appear in the list
    Our requirement is when F4 is selected system should list only live/existing batch numbers and serial numbers of that particular material.
    Can any one help us
    Thx
    Deva

    Hi Ramesh,
    Thanks for your input.
    However my requirement is instead of going to separate T.code IQ09 , user wants to list the existing Batch/Ser no details while selecting F4 during issues
    Thx
    Deva

  • How to create dynamic stamp that will prompt for Cause number and exhibit number?

    I have a need to have a three line custom stamp that will look like the following but will allow a user to input the Cause number then the exhibit number, then successively number exhibits that the stamp is applied to:
    EXHIBIT
    12:74130
    001
    Exhibit will always be the same, but the cause number would need to be modifiable per batch possibly and I would like to be able to update the exhibit number to have a unique number on each page of exhibits....or just each exhibit.
    Can that be done?
    thanks!

    It sounds like you are trying to use a retail serial as an enterprise serial and would like to bypass it's restrictions by deactivating it . . . I assume that's not possible, but perhaps I don't understand your issue.
    I doubt you'll get a good answer on the forum. Try support, your sales rep, or a help link on the licensing web site (if there is one).
    Ben

  • Receivables: Diferrence between "transaction number" and "document number"

    Hi!
    What is the difference between "transaction number" and "document number" as shown in the transactions window?
    Where are they used?
    thanks!

    Transaction number is the Invoice number. It can be a manually entered number in case of manual invoices. Even in case of imported invoices, it can be a manually assigned number if the trx_number field is populated in the ra_interface_lines_all table. If you Invoice batch source setup indicates automatic transaction numbering, the transaction (invoice) number will be automatically generated sequentially. The starting number is mentioned in the Trx batch source.
    The document number is a number which is generated by Document sequencing. To have the document number generated, you have to do few Doc sequencing setups like setting the 'Sequencial Numbering' profile options, creating document sequences and assigning the sequence to the Categories. The trx types are created as categories.
    The Transaction number can be the same as the document number if you enable the option 'Copy Document number to Transaction number' in the Invoice batch source.
    Hope that helps.
    Thanks,
    Anil

  • Excise Invoice number and Internal Number

    Hello Friends
    I have some queries ,I will be thankful to you if you could guide me, in understanding themu2026
    1) When we see the document in J1IEX ,in excise invoice tab, we see two fields :Excise invoice number and Internal Number.
    For Internal number we define the range in object J_1INTNUM, but how do we define range for Excise invoice  number
    2) Where do we maintain the relation between GRPO (Excise Transaction type) with the Excise Invoice number
    3) When do we require updating of register ,is it done on daily bases, and  how can we see the entries of RG23A part 1.
    4) We have excise invoice number  range of posted ,in process and cancel documents which is  assigned to GRPO transaction type, while running J1I7 though we select last option   part 1 posted  and part 2 not  posted, still the system shows the cancelled documents, How can I avoid  the cancel documents
    Thanks
    Siddharth

    1) When we see the document in J1IEX ,in excise invoice tab, we see two fields :Excise invoice number and Internal Number.
    For Internal number we define the range in object J_1INTNUM, but how do we define range for Excise invoice number
    -->> Ex inv nbr will be entered based on the vendor ex invoice .. this is external nbr assignment
    2) Where do we maintain the relation between GRPO (Excise Transaction type) with the Excise Invoice number
    --->> there is no relation between grpo vs. ex inv nbr
    3) When do we require updating of register ,is it done on daily bases, and how can we see the entries of RG23A part 1.
    >> u can see in J1I7 or thru table J_1IPART1
    4) We have excise invoice number range of posted ,in process and cancel documents which is assigned to GRPO transaction type, while running J1I7 though we select last option part 1 posted and part 2 not posted, still the system shows the cancelled documents, How can I avoid the cancel documents
    >> wait for others answers..

  • I have had  adobe creative suit 6 design standard for 2 years and all of the sudden it would not open. I do not have the windows disc anymore however i still have the product code, number and serial number. is there anyway to get my photoshop back?

    I have had  adobe creative suit 6 design standard for 2 years and all of the sudden it would not open. I do not have the windows disc anymore however i still have the product code, number and serial number. is there anyway to get my photoshop back?

    uninstall, clean and reinstall per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    for the installation file(s):
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.5 (win), 5.5 (mac) | 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Link between Material Document number & Accounting document number

    Hi All,
    For material document there is a corresponding accounting document number generated.However this is not the rule in all cases.
    Where is the link between the two(Material Document & Accounting Document) ?
    In other words i want to list those material documents only, for which accounting documents are generated.
    Regards
    Piyush Kothari

    STEP 1
    SAP query way to extract your information.
    Create an infoset SQ02 with a single table MKPF. (include key fields in the field group)
    Step 2
    From Extras
    Create an additional field called zawkey (like bkpf-belnr) which will concatenate the MM document number MKPF-MBLNR and MKPF_MJAHR. The sequencing shall be number 1.
    You may use this code below and paste also (this needs authorization as well)
    data: zzawkey like bkpf-awkey.
    clear: zawkey, zzawkey.
    concatenate mkpf-mblnr mkpf-mjahr into zzawkey.
    zawkey = zzawkey.
    Add another field called ACCDOCNO (accounting documnet number) with sequencing number 2 with following code.
    data: zaccdocno like bkpf-belnr..
    clear: zaccdocno, accdocno.
    select belnr from bkpf into zaccdocno where
      bukrs = ccode and
      GJAHR = MKPF-MJAHR and
      awkey = zawkey.
    endselect.
    accdocno = zaccdocno.
    Step 3
    Include the additional fields  into the field group.
    Step 4
    Click on the selection tab and create a parameter called ccode with a description Company Code and  against
    LIKE    BKPF-BUKRS 
    Extras  OBLIGATORY 
    Step 5
    Click on the selection tab and create a seelction criteria pdate with a description Posting Date for the field MKPF-BUDAT
    Extras  OBLIGATORY 
    Step 6
    Save, Generate and assign the infoset to a user group.
    Step 6
    Create a SQ01 query under the usergroup with all the fields in the infoset. and Execute. Enter a company code and one date of a working day where you expect material transactions.
    The result will be all the material documents and their corresponding accounting documents, if available. If you want to see only those material document that do not have corrsponding accounting documnet, then while you are in the selection screen say accounting document number is not equal to blank.

  • Standard Report with IDOC Number and PR number

    Hi
    My client need the Standard report with the combination fields of "  Purchasing Number , Requirements tracking number in PR,
    IDOC number , IDOC Processing status. "
    (Our PR will generates through IDOC from other system via XI interface)

    Hi Nagendra,
    for   Purchasing Number , Requirements tracking number in PR you can use -ME5A
    Purchasing Number-EBAN-BANFN
    Tracking number goto- MELB.
    table name-EKPO
    for  IDOC number , IDOC Processing status -we09
    For IDOC number -EDID4-DOCNUM
    IDOC Processing status-EDIDC-STATUS
    Regards,
    Krishna.
    Edited by: kris_hna on Sep 8, 2011 1:14 PM
    Edited by: kris_hna on Sep 8, 2011 1:19 PM

  • In order confirmation i need invoice number and delivery number.

    Dear Experts,
    I need invoice number and delivery number in order confirmation.
    how can i get the delivery number an invoice number.
    Program name: RVADOR01
    Regards
    Ahmed

    Hi
    In the Order confirmation Only sales order details will be there
    You better write a PERFORM  statement in Script and in the subroutine fetch the Delivery number and Invoice number with the following links and display them in script
    LIPS-VGBEL = VBAK-VBELN
    LIPS-VGPOS = VBAP-POSNR
    VBRP-AUBEL = VBAK-VBELN
    VBRP-AUPOS = VBAP-POSNR
    You can also can use the VBFA table
    using Prev doc type = C (order) and Subsequent doc type = J to get the Delivery
    and Sunsequent type = M for getting the Invoice Number
    see the sample code for subroutine
    REPORT ZMPO1 .
    form get_freight tables in_par structure itcsy out_par structure itcsy.
    tables: ekko,konv,t685t.
    data: begin of itab occurs 0,
             ebeln like ekko-ebeln,
             knumv like ekko-knumv,
           end of itab.
    data: begin of itab1 occurs 0,
             knumv like konv-knumv,
             kposn like konv-kposn,
             kschl like konv-kschl,
             kbetr like konv-kbetr,
             waers like konv-waers,
             kwert like konv-kwert,
           end of itab1.
    data: begin of iout occurs 0,
             kschl like konv-kschl,
             vtext like t685t-vtext,
             kbetr like konv-kbetr,
             kwert like konv-kwert,
           end of iout.
    data v_po like ekko-ebeln.
    read table in_par with key 'EKKO-EBELN'.
    if sy-subrc = 0.
       v_po = in_par-value.
       select
         ebeln
         knumv
      from ekko
      into table itab
      where ebeln = v_po.
      if sy-subrc = 0.
        loop at itab.
          select
            knumv
            kposn
            kschl
            kbetr
            waers
            kwert
          into table itab1
          from konv
          where knumv = itab-knumv and
                kappl = 'M'.
        endloop.
        loop at itab1.
          if itab1-kposn <> 0.
            select single * from t685t
                              where kschl = itab1-kschl
                                and kappl = 'M'
                                and spras = 'EN'.
            iout-vtext = t685t-vtext.
            iout-kschl = itab1-kschl.
            iout-kbetr = itab1-kbetr.
            iout-kwert = itab1-kwert.
            append iout.
            clear iout.
          endif.
        endloop.
        sort itab1 by kposn.
        loop at iout.
          sort iout by kschl.
          if ( iout-kschl eq 'GSDC' OR
               iout-kschl eq 'GSFR' OR
               iout-kschl eq 'GSIR' ).
            at end of kschl.
              read table iout index sy-tabix.
              sum.
             write:/ iout-kschl,iout-vtext,iout-kwert.
          out_par-name = 'A1'.
          out_par-value = iout-vtext.
          append out_par.
          out_par-name = 'A2'.
          out_par-value = iout-kwert.
          append out_par.
              endat.
            endif.
          endloop.
        endif.
      endif.
    endform.
    IN THE FORM I AM WRITING THIS CODE.
    /:DEFINE &A1& = ' '
    /:DEFINE &A2& = ' '
    /:PERFORM GET_FREIGHT IN PROGRAM ZMFORM_PO1
    /:USING &EKKO-EBELN&
    /:CHANGING &A1&
    /:CHANGING &A2&
    /:ENDPERFORM
    &A1&
    &A2&
    This Code is to be written in the PO form under ADDRESS window.
    /:DEFINE &A1& = ' '
    /:DEFINE &A2& = ' '
    /:DEFINE &A3& = ' '
    /:DEFINE &A4& = ' '
    /:DEFINE &A5& = ' '
    /:DEFINE &A6& = ' '
    /:PERFORM GET_VENDOR IN PROGRAM ZMFORM_PO
    /:USING &EKKO-EBELN&
    /:CHANGING &A1&
    /:CHANGING &A2&
    /:CHANGING &A3&
    /:CHANGING &A4&
    /:CHANGING &A5&
    /:CHANGING &A6&
    /:ENDPERFORM
    &A1&
    &A2&
    &A3&
    &A4&
    &A5&
    &A6&
    Regards
    Anji

  • Invoice number and document number not printed in payment advice

    Hello Gurus,
           I am executing reprint check through transaction fch7, In that Invoice number and document number not printed in payment advice. I have created zscript for that and also assinged regup-belnr and regup-xblnr and used standard program RFFOUS_C.
    other fields from regup table are displayed but above two mentioned fields are not displayed.
          I even tried debugging standard RFFOUS_C prog, in that regup-belnr and regup-xblnr are coming but it is not printed on form.
    With regards,
    Vikram

    Hi,
    Debug you Zscript and check the invoice no and document no. Have assigned that script in FBZP..? check the which form is calling FCH7 in debugger mode..?
    Rgds
    Aeda.

Maybe you are looking for