To map batch number to serial number for inbound message type WMMBXY

Hi Gurus,
Can anybody guid me how to map batch number to serial number for goods receipt inbound EDI 861 message type WMMBXY .
And can tell me how to assign serial number in Purchase Order for serialized product for perticuler Batch number.

hi dsk,
thanks for your earliar reply,
actually iam working on sapscript there i want to add batch number ,but i am not able to clear my doubt from where i get this.
how can i map batch number with corresponding to PO num ber, '
in the report i used structure vbplp with field charg"(batch num).
also i want to know from which table i can get customer part number and Po number .
how can i add batch num ,..
from which table or with which field i can compare itr to get .
sunny

Similar Messages

GET spool number according to Message type (nast-kschl)

hi all ,
i want to get the oldest spool number for a message type and PO number via abap program
thinks in advancs.
karim .

hi,
field dsnam of the table nast can give spool request name..
may be this field can help u in solving ur issue ..
regards,
prashanti

Map BATCH number corresponding to ORDER number and Material number .

hi all,
i want to map the BATCH number corresponding to Material Number .
i searched tables MCHA which has two fields Material number and Batch number but it doenot have Order number.
so how can i get Batch number as in table AFPO/AFKO i have all these three fields batch/material/order numbers.
but the batch number column is blank for all .
and in case of table MCHA , these is assigned batch number to every Material number .
also i want to ask , either the Material number in both tables (MCHA AND AFPO) is same or different as i didnot found any relation to map these three field by other fields too.
so please suggest me the Possible way to resolve this .....
sunny

hi dsk,
thanks for your earliar reply,
actually iam working on sapscript there i want to add batch number ,but i am not able to clear my doubt from where i get this.
how can i map batch number with corresponding to PO num ber, '
in the report i used structure vbplp with field charg"(batch num).
also i want to know from which table i can get customer part number and Po number .
how can i add batch num ,..
from which table or with which field i can compare itr to get .
sunny

How to show the internal batch number for order in make to order scenario

Hi !!!
Gurus!!
I am working on make to order scenario .For delivery of order may I see the batch no.of esch order.
How system will get the internal number batch.
I have config. batch management.
What should be the next process.
Regards,
Nitin

Hi,
QI am working on make to order scenario .For delivery of order may I see the batch no.of esch order.
A. Yes you can see batch number for each order
QHow system will get the internal number batch.
A. there are two possiblities assign you batch number at production order before release or assign batch or each GR at the time of executing GR transaction.
QI have config. batch management.
A.In Material master you also have to tick for batch managemnt relevency
QWhat should be the next process.
A. Consult again if any thing missing
Regards,
Syed

Process Order number as batch number for produced materiai

Hi gurus
Is it possible in SAP to automatically set the process order number as the batch number for an semi finished good or finished good? Is there a config like that in SAP?
Thanks

Hi,
Refer this [link|http://help.sap.com/saphelp_46b/helpdata/fr/e9/c6f9bdaa28d3119b440060b0671acc/content.htm]
you have to use EXIT_SAPLV01Z_001 and EXIT_SAPLV01Z_002 in the case were you want to Copying the production order number to the batch number.
Regards,
Dhaval

How to generate the batch number for group of records

Hi All,
requirement: i have created one sequence to generate the batch numbers.i have to get the nextval of the sequence for batch number (this column is not part of the table. its dynamic column/alias column) only for every 50000 records of a table.
detail description:
for example, if i have 10 records in a table. And, if i want to generate the batch number for every 2 records, then the output should look like belo.
batch-number qty
1 10
1 20
2 30
2 40
3 50
3 60
4 70
4 80
5 90
5 100
Please help me on this. Please let me know if you need more info.

one more update on the above request. this has to be done using SQL query only.

Automatic Batch number for rETURN Delivery

When creating a return delivery, without reference, we need to manually input the batch number (assign dummy?).
Is it possible to have the system automatically generate the batch number for returns? If yes, how?

Hi,
No you can' not
even if you try to create Return delivery without refrance to any order then it will determine item category,but gives error that,
YOU CAN NOT ADD THIS ITEM IN DELIVERY
because it is controlled by delivery document category
the delivery document category is - T (Returns delivery for order)
Kapil

Batch Number for Valuation Type in BOM item detail

Dear PP Expert.
Is it possible to maintain batch number for valuation type in BOM item detail ? My requirement is for example in bom item 10, component A is maintained with batch number for valuation type so that in production order batch number field automatically filled.
Fyi i have tried user exit : Enhancement for BOM item: PCSD0002. Here we can maintain valuation type for component in item detail in customer tab. But unfortunately valuation type here is not link with batch number for valuation type in Production order.
Regards,
Arman

Hi JH thanks for your quick reply,
Let me describe it more specific, I have two material FG and SFG. Material FG is maintained with valuation type so when we do goods receipt for SFG it's asked to input valuation type in batch field. In stock SFG material qty is separated for each valuation type like batch.
Now i want to maintain in BOM for FG, where component SFG has fix the valuation type / batch so that in production order we don't have to choose manually. Do you have any idea ?
Regards,
Arman

Use Batch Number for bin location

Hi:
if I not use WM module, can I use batch number for bin location instead.
I will set naming convention for batch number to represent bin location.

Hi,
You can use it, but I wont suggest it. The batch specifies a group of materials produced with same recipe or with same characteristics.
If you use BIN location as batch name, suppose you transfer post from one storage location to another storage location where the bin location change and the batch number remains the same. It will simply create confusion.
Regards,
AKPT

Hi I've got a I phone 5 c how can I put my number for I message instead ov email

HI I have a I phone5 c how can I put number for I message instead of e mail

It is there - at the bottom below the section - you can be reached by iMessage at.
The iPhone's cell phone number is automatically registered with iMessage along with your Apple ID email address.

Identification number for the object type H

Hello:
There is an infotype thats allow me to enter an identification number for the object type external person (H) in the training and event management module (PE)?. I was checking in the configuration and I dont find the solution for this issue.
I ask to myself if is necessary to create one infotype for this purpose?
I will appreciate your colaboration and the answer.
Thanks

Hi Vijay:
It is something similar to the infotipo 185 of object person type of the module PA. I need an identification document for external person (example: driver license)
Regards
CarlosZ

Sequential number for PDC messages

i need information regarding field named PDSNR (Sequential number for PDC messages) in table named ASSOB.
what are these PDC messages ?

Hi,
Number Range for your PDC message. The PDC messages are nothing, various message you are getting after the upload of time datas from PDC to SAP.
Good Luck
Om
Reward it, if u feel hlepful.

IDOC message type WMMBXY not including Serial numbers in GR material documents when created with reference to an Inbound delivery

Hello,
We currently have an inbound ALE process (message type WMMBXY and basic type WMMBID02) to post GR's against inbound delivery. If the inbound delivery item is maintained with serial numbers, we want those serial numbers to be pulled into the goods movement material document (and stored in SER03).
Currently segment E1MBXYJ is maintained with the inbound delivery number in field VLIEF_AVIS and Inbound delivery item number in field
VBELP_AVIS. In segment E1MBXYI, no purchase order is assigned and the fields EBELN and EBELP are blank. The movement indicator (KZBEW) has the value 'B'.
Even after making the above settings, the serial number(s) maintained on the Inbound delivery item do not get saved to the material document.I did look at OSS note 833603 (Solution for 2 - GR for Inbound delivery) and we have followed the same settings. This works when there is no serial number in the Inbound delivery. However if we have serial numbers, the IDOC posts successfully, however the material documents in MB03 do not have any serial numbers copied over from the Inbound delivery where the serial numbers are definitely assigned.
Any help you can provide is greatly appreciated!
Thanks,
Ashvin
P.S
If we manually create the GR via MIGO, the serial numbers are automatically applied to the GR material document. This is what we want to accomplish via the above IDoc process.

Hi
Try with enhancement MWMIDO08. See note 833603 - EDI: Goods receipt for stock transport order for further information.
I hope this helps you
Regards
Eduardo

IDOC Segment missing for MATMASS Message type

Through change pointer program for the message type YAUIHUBMATMAS IDOC is triggered.
1) Change pointers are defined in system for the message type T Code u2013 BD52.
2) If respective field is changed in material master , this data is stored in change pointers table BDCP.
3) Background jobs are scheduled every day, which searches for the changes pointer table and triggers the idoc.
In our case IDOC is getting generated but with one segment missing.
We have analysed the succesful and failed IDOC and found desrepency is field updation of BDCP table.
Succesful case contain material number in object value of ZZMDST field where as failed contain some other value.
Can anyone please help us to guide how the BDCP table is updated and the values are mapped in it or any other suggestion to find why the segment is missing in it.
Regards,
Roshni.

Jürgen L. wrote:
> I have never seen a YAUIHUBMATMAS IDOC, nor a ZZMDST field .
> This seems to be home made.
>
> You are expecting that standard SAP programs are generating change pointers for your z-fields?
> Do you see a change history in material master for your z-field?
>
>
> follow the slution from this thread:
>
Yes ,This is a Z -field.
Change pointer is triggering the idoc fo this Z-field but in some cases one segment is missing .
This is z-field in the basic data view of material master.
Yes , we have checked the change history in material master for this field it is getting updated there in BDCP table as well but in BDCP table if this field is flagged then object value is not contain material number instead it contain some other number .
But in case of succesful IDOC the object value is same as material number.
Regards,
Roshni

Need help for new message type for PO archiving

Hello All
I have configured new message type ZARR for PO archiving process. After configuring all the steps this condition is not getting picked to by itself. And after maintaing it manually it is giving red flag without any error message. Here I am listing all the step that I have followed for config. Please help me am I missing something or any parameter is wrong.
Steps for new Message Type for PO Archiving
1.     Defined new Table 513 Purch.Org./Plant.
2.     Defined new access sequence Z513 Access Sequence for Archiving.
Following are parameters to the Access Sequence
Access Sequence Number = 21
Table = 513
Description = Purch.Org./Plant
Requirement = 101
Exclusive = Yes (box checked)
3.     Maintain Output Type ZARR for PO
General Data
Access Sequence = Z513
Access to condition (Checked)
Multiple Issuing (Checked)
Program = FM06AEND
FORM Routine = CHANGE_FLAG
Default Values
Dispatch Time = Send Immediately (when saving application)
Transmission Medium = Print Out
Storage System
Storage Mode = Archive Only
Document Type = ARCHIVE
Mail Title and texts
Language = EN
Title = Archiving for Legal Requirement
Processing Routines
Transmission Medium = 1 (Print Out)
Program = SAPFM06P
Form Routine = ENTRY_NEU
Form = ZJ_9H_MEDRUCK
Partner Roles
Medium = Print Out
Funct = VN
Name = Vendor
4.     Fine-Tuned Control: Purchase Order
Oprat. = 1
CType = ZARR
Name = Testing for Archivin
Short Text = New
Update Print Related Data = Yes (checked)
Oprat. = 2
CType = ZARR
Name = Testing for Archivin
Short Text = Change
Update Print Related Data = Yes (checked)
5.     Maintain Message Determination Schema: Purchase Order
Procedure RMBEF1
Step = 100
Cntr = 1
CTyp = ZARR
Description = Testing for Archivin
Requirement = 101
6.     Assign Schema to Purchase Order
Procedure RMBEF1
7.     Define Partner Roles for Purchase Order
Out. = ZARR
Med = 1 (Printout)
Funct = VN
Name = Testing for Archivin
Name = Vendor
8.     Test Condition Maintained in MN04 (Master Data)
Purch. Org. = 0001
Plant = 24
Partner Funct = VN
Medium = 1 (Printout)
Date/Time = 4 Send immediately (when saving application)
Output Device = HUL1
Storage Mode = Archiving only
Thanks
Ankit

the problem is the Exclusive = Yes indicator in the access sequence.
Your other message has this exclusive indicator as well.
so if the first message is found, then no other message wil be determined
to allow several messages in one PO, you must not set this exlusive indicator

To map batch number to serial number for inbound message type WMMBXY

Similar Messages

Maybe you are looking for