Batch Quantity Proposal during SL Transfer

Hi
In MIGO, when moving a material which is stored in batches from one storage location to another (mvt 311), is it possible to have the system propose the quantity to be moved, based on the batch number entered?
The reason for this is that we are always moving full batches, and would like to avoid the step of looking up the quantity in each batch, before having to enter it in MIGO.
Best Regards
Nicolai

Hi,
   System wont know the quantity to be moved and hence the system wont propose the quantity to be moved. It is the user who decides the quantity to be moved and he has to enter the quantity manually.
   If you are always transferring the full batch quantity, you may go for development if required. Check the stock quantity for the material and batch in the supplying storage location from MCHB table and propose the quantity by default when the movement type is 311. I would recommend to make the quantity field editable, even if you propose the default full quantity. Please note that the same batch can exists in different stock types / special stocks etc. These cases also should be taken care.
Regards,
AKPT

Similar Messages

  • Quantity proposal in Batch determination

    Hi,
    We are doing the batch determination in Process order for Batch and HU managed Raw materials.
    I created two Process Orders
    Requirement for Raw Material A in Process Order 1 = 1000 Lbs
    Requirement for Raw Material A in Process Order 2 = 1200 Lbs
    Stock of Batch 101 for Raw Material A = HU Quantity = 1500 lbs
    When i do batch determination for Process Order 1, Batch 101 gets assigned for Qty = 1000 Lbs. I release the Process Order.
    But when i do Batch determination for Process Order 2, the entire quantity of 1500 Lbs shows available, instead of remaining qty of 500 Lbs, as 1000 Lbs is already reserved for Process Order 1.
    How do i make sure, that only difference is available for Process Order 2, i.e. only 500 Lbs?
    I checked the scope of availability check and found to be OK. I also tried different Quantity Proposals 1, 2, 3, 4, and 600. But ii does not give the desired result.
    Thanks in advance for your time.
    With Regards,
    Mangesh Kulkarni

    Hello Pavan and Sanil,
    Thanks for the response.
    Yes...if i create the Transfer Order (as the Raw Materials are HU managed), then the remaining quantity is proposed for the 2nd Process Order.
    But we want to do batch determination and release the all the Process orders, one day in advance for next day. Also we would like to create a collective Pull List for all the process orders for tomorrow and move all the materials together, instead of order by order.
    Is there any User Exit in quantity proposal, where it would check if that particular batch is already assigned to a process order and reduce it and make the leftover quantity available to the 2nd process order?
    GI through MB1A would happen after the production is executed and it would be too late then to propose the leftover quantity to the next process order, create a pull list and then stage the material to the shop floor storage location. Ours is a continous production.
    Appreciate your feedback in advance.
    With Regards,
    Mangesh Kulkarni

  • Quantity proposal in batch selection

    In batch search strategies you can select a quantity proposal routine to be used to allocagtge qtys to the proposed batches in a specific manner.
    I'm trying to locate where you add/change/modify these routines.  The help file indicates these are maintained via transaction VOFM.  But under that I can't locate the specific quantity routines for the batch search strategies.  Maybe I'm just not seeing it or I'm in the wrong place.
    Can someone point me in the right direction for this?  We need to config in custom quantity routines for our project.
    This is an ECC 6.0 system.
    Thanks,
    Craig

    Custom routines can be configured using VOFM but Standard SAP doesn't allow u to configure Quantity proposal in VOFM.We can configure Quantity Proposal Routine ....When u double click the Strategy type in the Quantity proposal Routine U have the Option to Maintain. Using this you can configure your requirement.
    Reward Points If helpful.
    Thanks,
    Sudheer

  • Negative batch quantity for inventory

    I am stuck with deriving a solution for one of the requirements in inv.mgt
    as described below.  Any ideas on solutions will be appreciated.
    We have a storage location 999 where it is used to park inventory
    differences during stock count and shrunk management i.e. no write off/on
    but stock movement to sloc 999.  The inventory differences could be
    negatives at any point of time.  Once a year, the differences will be
    cleared out (write off/on stock to adjust to zero).
    SAP allows negative quantity at storage location but not negative batch
    quantity.  SAP WM is not an option due to operation complexity.
    I can propose to u2018re-engineeru2019 the processes to recognise stock
    losses/gains as they occur, but I will keep it as last resort.
    regards,
    Smitha

    Hi Smitha,
    If I understood your problem correctly, ou should post all inventory differences by MI01, MI04 then MI07.
    SAP will post differences correctly & History will also be maintain perfectly.
    Pls. let me know if your problem is other than this.

  • Where can I find 'Exit to quantity proposal' routine in 3.1i

    Hi All
    I'm working on 3.1i and trying to create new routine for automatic batch determination process. But I'm unable to find its transaction code.  I have verified VOFM, it is not there .
    Please inform tcode or path where I can find batch determination routines.
    ThanQ

    Custom routines can be configured using VOFM but Standard SAP doesn't allow u to configure Quantity proposal in VOFM.We can configure Quantity Proposal Routine ....in SPRO when u double click the Strategy type in the Quantity proposal Routine U have the Option to Maintain. Using this you can configure your requirement.

  • Printing dunning notices using SMARTFORMS,error during parameter transfer

    Hi Friends,
                    I face a error message "Include text ZGA_DUN_HDR does not exist (object TEXT, ID ST)" when i run the dunning run.
                    I had searched every node for text ZGA_DUN_HDR in the smartform,I didnt find the text in it.
    However when I execute the smart form for print preview an error message "Printing dunning notices using SMARTFORMS,error during parameter transfer".This error i believe is due to wrong parameter passing in the fm 'GET_SF_DUNN_DATA'.It raises an error no_parameters_found.All parameters are passed correctly.
                    Can you guys help me out.
    Edited by: RAJIV KAUSHAL on Nov 14, 2008 6:03 PM

    you can create this text ZGA_DUN_HDR  in SO10 tcode and try ...

  • Excise Invoice generation during stock transfer

    Hello All,
    For an excisable item it is a rule in indian localization whenever the goods leave the warehouse it has to carry a proper excise document. This is possible in case of a delivery. But how to manage this in case of stock transfer? When the excisable goods are transfered from one warehouse to another then a excise invoice is to be generated. How can this be managed in SAP Business One? Please suggest.I am using SAP Business One 2005B PL 41
    Regards,
    Debraj

    This Functionality is not available in SAP 2005B.
    As a workaround,
    Create Journal Entry for Excise Duty & VAT
    For Excise Invoice, create a seperare PLD in Inventory Transfer Screen
    Note:
    This feature of Excise Invoice generation during stock transfer is available in SAP 2007B
    Edited by: Sridharan T on Sep 8, 2008 3:10 PM

  • Prevent quantity updating during Goods Receipt

    Hi,
    We have a particular requirement for a type of subcontracting process (not the standard SAP subcontracting) as mentioned below.
    We create a Purchase Order for a material (without a standard cost) and giving an account assignment category in the PO. The Net price mentioned in the PO is the processing charges for the vendor (service charges). It does not indicate price for the material.
    When we receive the finished material from the vendor, we perform a Goods receipt. The stock gets updated and accounting documents are created.
    Our requirement is to stop this quantity updating during Goods Receipt. But, at the same time, we would like the accounting documents to be created as we need to pay the vendor.
    Is there any way of achieving this?
    Pl let me know. Any inputs would be appreciated.

    Hi,
    Thanks for the response!
    I understand that in the standard process, the parent item inforecord takes care of the processing charges. But this is process that has been customized differently as the client has SAP as well as legacy systems talking to each other.
    Turning off the qty updating at the material type level will turn it off for all purchase orders created for the material at that particular plant which is something we would like to avoid.
    We would basically like to turn it off for particular purchase order type. The reason for turning it off is that after the GR is done, there is a separate process that comes from the legacy system and updates the same quantity of finished product and also posts the consumption of components.
    So, our basic requirement is , is it possible to turn off qty updating for the GR of a particular purchase order document type and yet create accounting document. Material is not a valuated material and has a standard cost zero.
    Any inputs in this regard will be helpful.
    Regards

  • Automatic goods issue for outbound delivery, during the transfer order confirmation

    Hello,
    Could you please advise how to realize automatic goods issue for outbound delivery, during the transfer order confirmation in the WMS.
    Now after creation of outbound delivery, i can't post the goods issue. Before i have to make the transfer order and confrim it and only after this i can post the goods issue in the VL02 t-code.
    Could you please advise - what i have to customize that to make automatic GI for outb. delivery (i mean with creation material document) during the TO confrimation.
    Thanks in advance.

    Hi Iiya
    Check the below setting, might be helpful

  • Error during data transfer from Lotus Notes to SAP via JCO - Urgent Help Required

    Dear SAP Expert:
    I need your help! Recently getting error during data transfer to SAP. I need your suggestion!
    I am transferring Lotus Notes data to SAP via JCO, recently getting the below error msg, could you pls tell me what could be the reason?
    Please suggest me how to fix that kind of issue.
    "com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Error in ABAP/4 statement when processing an internal table. table.
    at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeExecute(Native Method)
    at com.sap.mw.jco.rfc.MiddlewareRFC$Client.execute(MiddlewareRFC.java:1244)
    at com.sap.mw.jco.JCO$Client.execute(JCO.java:3842)
    at com.sap.mw.jco.JCO$Client.execute(JCO.java:3287)
    at SAPAdapter.execute(Unknown Source)
    at JavaAgent.fillBapiAndWriteBackToNotes(Unknown Source)
    at JavaAgent.NotesMain(Unknown Source)
    at lotus.domino.AgentBase.runNotes(Unknown Source)
    at lotus.domino.NotesThread.run(NotesThread.java:249)
    Thanks in advance! Your help would be highly appreciated! Thanks again!

    error is clear, check your abap code.

  • Block zero quantity when creating Inventory Transfer

    Hi all,
    does anyone know how to block zero quantity when creating inventory transfer?
    for example: I have zero quantity in warehouse A. Then I want to transfer it to warehouse B. The system accept that. So, when I check that item in warehouse A, the in stock column become negative. How I can protect it?
    please help me. it's very urgent.
    thanks
    sisca

    Go to Administration > System Initialization > Document Settings > General Tab
    Check Manage Inventory nu Whse and also check Block negative inventory. Read details below of their functionality.
    Manage inventory by whse
    Defines whether the check is performed for the warehouse selected in the document row. If you select the checkbox, the system checks the minimum inventory level in the warehouse that was selected for the item when the sales document was entered.
    If the transaction causes the inventory level in that warehouse to fall below the minimum inventory level, a warning message appears even if the total available inventory of the item is greater than the minimum warehouse quantity. If you do not select this checkbox, the system checks the total available inventory in all warehouses where this item is stored.
    You can also define automatic notification for a specific user when the inventory level falls below the minimum level. A purchase transaction can then be initiated.
    Block negative inventory
    Select to block documents that would cause the level of inventory to fall below zero. If you deselect the checkbox, the message “Negative inventory usage is not in accordance with accounting rules. Are you sure you want to enable negative inventory usage?”
    If you select Manage inventory by whse and Block negative inventory, SAP Business One calculates the block per warehouse. However, if the item is not handled by a warehouse and you do not select Manage inventory by Whse, the block is calculated for all the warehouses.

  • Inventory Tracking / Stock Posting cannot change batch quantity

    When stock taking, Item A in the system consist of :
    - Batch B-01 = 10 pcs
    - Batch B-02 = 10 pcs.
    Actual stock has:
    - Batch B-01 = 20 pcs.
    Anybody knows how to fix this batch quantity, through Inventory Tracking / Stock Posting ?
    Since I try it, it couldn't work. 
    Best regards,
    Surya

    Hi Surya,
    Check the following thread
    Batch Inventory tracking
    Inventory management via batch number
    *Close the thread if issue solved
    Regards
    Jambulingam.P

  • STO: Rounding off Batch Quantity in Delivery Document?

    Hi All,
    I created Inter Company STO & the delivery is done in the background using TCode- VL10B. and the Batches are determined automaticaly. The issue is that in  few scenarios the batch Quantity are in decimal. Please suggest How to configure to rounding off batch quantity?
    Regards,
    C S Javali

    Dear Javali....
    Iam facing the problem while searching the batch on FIFO basis in VL10B and VL02N ....system is not searching the batch but saying "Batch determination not possible since there is no batch search procedure"
    Pls pls  tell me how to configure this...
    Thanks in advance
    Suraj

  • HELP! brand new iMac froze during firewire transfer and won't start!!!

    During my setup for my brand new iMac I follwed the directions and connected my iBook via firewire to transfer my files. I noticed after a while that my iMac was frozen on "45 minutes remaining" and the blue line wasn't wavering a bit, and after over half an hour it hadn't moved. I powered off the iBook, and still nothing happened to the iMac screen--it remained frozen. I went to the guidebook and nothing seemed to work, so I powered off and on again, only to get a flashing question mark. All this and I just bought the darn thing tonight!
    Help! Anyone know what happened and more importantly how to fix it?
    Thanks.
    Lindsay

    it sounds like the iBook went to sleep during the transfer or at least it's hard drive spun down.
    what you need to know is hope that simply booting from your install DVD will let you repair the iMac's hard drive. You could also try booting holding down the Command S keys on startup and when you get to the Single User Mode command line prompt follow the directions there for running fsck to repair your hard drive.
    Do you have a FW hard drive? Can you copy files from iBook to FW and then from there to iMac?
    And, it is always nice to have a FW emergency/backup hard drive. The iMac needs a different partition scheme to be bootable from FW than the iBook does, but you can create the proper partition type etc from a Tiger Installer and put OS X on FireWire, then see if you can backup and repair your iMac's hard drive.
    MicroMat's TechTool Pro 4.5.1 is now shipping and is compatible, Universal Binary and bootable. Always good to have some 3rd party utility handy.
    If you are just starting out, you probably don't have much if anything installed yet, so you may want to just erase your iMac drive and restore to what it was. That would be the easiest if Disk Utility won't repair it.
    Instead of powering off the iBook, I would have tried to force quit whatever was running, like Migration Assistant.

  • Production Order Number and Batch Number same during order creation

    Hi All,
    I wanted to keep the Production Order number and Batch Number same during creation.
    How I can do that during creation of order only. So during creation same number to be get assigned automatically in the background.
    One thing I can maintain ; the same number range for both.
    But how to activate other functionality.
    Regards,
    Amit

    Hi SAP2511,
    For Production order-
    1.You can define a Order type  and  Mantain the number range same as batch number range (in  OPJH transction)
    For Batch
    1.Activate Automatic internal batch assignment - (OMCZ)
    2.Number range for batch - for object - BATCH_CLT - (OMAD)
    For batch creation at time of Order creation -
    You can create Automatic batch at the time of order creation or order release
    1 Create Production scheduler Profile(OPKP) and assign in Work scheduling view of material master for which you want to create batch at the time of order creation or release.(Select automatic batch creation at the time of release or creation in OPKP)
    Things to be taken care -
    1 . What if you set deleation flag for order?
    Regards
    Girish
    Edited by: girish khobare on Aug 20, 2010 9:31 AM

Maybe you are looking for

  • How can I turn off the sound from the original midi  or audio tracks when I turned on the duplicate tracks for editing ?

    How can I turn off the sound from the original midi or audio tracks when I edit or listen to the duplicate tracks in Logic Pro 9 ? I'm using iMac desktop with Mac OS X Version 10.7.3. Pls advise.

  • Select Date Parameter in Crystal Report

    Select fields Customer number ,Part code, transaction date, and sales amount from a table by month for a report . Report to run LastFullMonth. However, need to include a date that lists the first time a customer bought the part previous to and includ

  • Change SC from SRM

    Hi Guys, We usually change SC from Web Version , i follow the same thing as of today. I want to know how to change the SC from SRM backend... i mean from SRM Server any T-code for this Rg sameer

  • .sql program VS stored procedure

    Hi, We are in the process of migrating a lot of .sql files into Oracle warehouse Builder programs. So most of them will be converted to stoted procedure, Before committing anything , Just a quick question .. Can there be any statements which is ONLY

  • Plannig hierarchy

    Hi, PP expert , Can u explain the total senario of Plannig hierarchy use in SOP and then how pp cycle will run. Nitu.......