Batch to open xp mode then run a program inside xp mode

I have a batch file that has to be ran in xp mode and I need a batch file that will open the xp and run the batch file that is on the desktop. My boss insists that it be as easy as one click from windows 7 desktop.

Hi,
Inside xp mode, create a shortcut to your app, under, %allusersprofile%\start menu. A few seconds later, the app short cut gets published on the win7 start menu under Windows Virtual pC"->"windows xp mode applications"
For more information, please read this familiar thread:
https://social.technet.microsoft.com/Forums/windows/en-US/274beeeb-85bb-4741-b251-9e9588a26698/create-shortcut-to-xp-mode-app-from-win7-host
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

How to run labview program in debugging mode in windows 95 version

Respected all,
I am facing probelm while running probe.vi.
I received this command "connection to acquisition board was not found" when i run labview program.
I am using labview 5.1, fieldpoint FP 1000, NI-DAQ 6.5, Field point explorer version 1.6, Measurement and Automation Explorer 1.0.1.
I would kindly request you please help me how to run my program probe.vi in debugging mode in windows 95 version, so that i can locate where error occurs.
Thanking You
Yours faithfully
M.Vijay

Respected Norbert,
Thank you very much to for your help.
Norbert : Possible reasons are e.g. wrong IDs for measurement devices. If the error is connect to the FieldPoint, it is possible that it isn't configured correctly.
I am using Field point explorer 1.6, The Field point instrument FP 1000 and RS-232 port is using. It is confirmed that the field point instrument is working properly by LED light indication test.
Norbert: It sound like you are using DAQ devices (like PCI MIO 6952E) in the application. Are you sure that you select the correct device ID for this?
I am asking you to know, If i using Labview and Fieldpoint instrument FP 1000 to monitor my parameter interms of All, Channel 0, Channel 1, Channel 2, Channel 3, Channel 4, Channel 5, Channel 6, Channel 7 for my measurement.
But now i need to solve the command connection to acquisition board was not found, The expert say this command is due to there was no AT-AO-10 Analog Output board was present in CPU.
I do not find AT-AO-10 Analog Output board in my CPU, Previously the instrument was worked perfectly by other person who assembled everthing to measure temperature.
The only aswer know send by previous person is if my task does not imply the use of a DAQ you probably have to locate where the DAQ driver is called and exclude it from the program. try to run the program in debugging mode so that you can locate where the error occurs.
I do not know how to proceed his instruction. So i would kindly request you to please help me to solve my probelm.
I also removed AT-AO-10 software from device manager >> Data Acquisition system >> AT-AO-10 just now.
I also find GPIB version 1.30, when i remove in add or remove program, it say that Error removing the GPIB.
I am eagerly waiting for your help.
Thanking You
Yours faithfully
M.vijay

Cannot open data file to run registration program

I just bought my new laptop last week and after Ive added all my files (105G) and a few programs, this error message comes up upon startup "cannot open data file to run registration program". I was told by the Toshiba people to use a recovery cd but that it would reset my computer back to its original settings which i don't want to do. I have Vista and everything works fine but Id rather not get that message every time I boot up. Any suggestions?

Thanks for adding Defender.
We have something in common. Avatar that likes to Stealth hehe.
Fixing Computers no Jutsu! (Ninja Help and Support Technique )

Can we able to run java program inside javascript

Hi all
can we able to run java program inside javascript or integrate java with javascript.....whether its possible...

No. You can't execute Java code from within a JS script in Acrobat/Reader.

Is it possible to run a program in compatibility mode?

I am running 10.7.3, and I am trying to get Mackie Tracktion 3 up and running on my Mac. I've been told tha T3 works on previous version of the Mac OS, but not the last few updates. Is there any way that I can run this program in a compatibility mode, or revert my OS to a version that supports T3? Any help would be greatly appreciated.

Sorry, but that's most likely a problem that Mackie is going to have to help you with. Since the application launches, it's not an issue of the application being PowerPC-only, which has affected many people who've moved to Lion. Mackie's support site is very limited and uninformative, so I can't find any useful suggestions. You might have more luck in Mackie's forums:
http://www.mackie.com/ubbthreads/ubbthreads.php/
Good luck.

A large program with MANY .vi's loads an onboard program to a 7344 board, later in anothor .vi I load a value into var = 1. and then run Onboard program. Program runs but value of var =1 is not used.

Onboard program calls the "Load constant to variable.vi" in first block. Same call is made in labview code just before the run program block. the variable in the onboard program ALWAYS defalts to (0). WHY???

Hello,
Thank you for contacting National Instruments.
My guess is that the variable is being overwritten by the first call (Load Constant to Variable VI) of the onboard program. The order of operations for the second VI appears to be the following:
1) Load Constant to Variable (variable 1 = 10000)
2) Run the onboard program
3) Onboard program calls Load Constant to Variable (variable 1 = 0)
Any value that the first step of the onboard program loads (step 3 above) will overwrite the value loaded just before the onboard program runs (step 1 above).
I have attached an image of the block diagrams for both VIs I used for testing. The first VI loads an initial value into variable 1, starts program storage, loads position, loads veloci
ty from variable 1, loads acceleration and deceleration, starts motion, then ends storage. The second program simply loads a new value into the variable then runs the stored program. As the variable value in the second program is modified, the velocity changes appropriately. I tested this with a PCI-7344 in LabVIEW 7.1 with NI-Motion 6.1.3.
Hopefully this will help you track down the source of the problem.
Best Regards,
Jesse D.
Applications Engineer
National Instruments
Attachments:
OnboardTestImage.JPG ‏36 KB

Run Java program in Hidden mode

Dear friends,
how can I run my JAVA program, so that it is not shown on task-bar list or in task manager list
Thank you

"JWindow or Window will make it not have a taskbar
button or a task list item (in Task Manager)."
I'm sure that if I made an application which has a
JWindow, I will see the javaw.exe task in my task
manager...There are 2 things in Task Manager:
- Applications or Task List
- Process List
JWindow shouldn't show in the first, but any app should show in the second.

How to make Applescript open AI then open file then run ExtendScript then close?

Here's the sample Applescript code I came up with using the scripting guide/reference for CS6 and also doing some online searches:
tell application "Adobe Illustrator"
    activate
    delay 10
    set pfilepath to "/Users/username/Documents/Temp/someFile.ai"
    set pfile to POSIX file pfilepath
    open pfile as alias without options
    delay 10
    do javascript "#include '/Users/username/Documents/Temp/someScript.jsx'"
    delay 1
    quit
end tell
I just want to open the app (sample here for AI but also nice to do same for Photoshop), open a file, then run ExtendScript file against it, then close after processing. With this sample script, all that works is the app launches. No file opened, no script ran, app doesn't close at end. I see no errors pop up nor anything show up in command prompt.
The sample ExtendScript just triggers an alert popup message for testing
Also to note, the Applescript snippet is executed from Python but I believe where/how it's executed shouldn't matter (except maybe where the error messages might show up). Although in worse case, I'll debug/run through the AppleScript editor.
Any tips on what's wrong here? Or does it look technically correct?

No, I don't have specific documentation, but you can put together such for Python from bits & pieces here & there. And yes, I made it cross-platform to anticipate Adobe users on both Mac & PC, for which there currently are, though for what we're doing skews towards Windows for now.
For the COM API, follow the VBScript reference and code samples. Just convert the method calls to Python COM. There will be slight syntax differences sometimes (e.g. add "()" to method call for VBScritp subroutines that don't need them, etc.). The scripting guide link below should have code samples for VBScript.
http://wwwimages.adobe.com/content/dam/Adobe/en/devnet/illustrator/sdk/CC2014/Illustrator% 20Scripting%20Reference%20-%20…
http://wwwimages.adobe.com/content/dam/Adobe/en/devnet/illustrator/sdk/CC2014/Illustrator% 20Scripting%20Guide.pdf
For example of Python COM, you can search online, or look at AutoItDriverServer/server.py at master · daluu/AutoItDriverServer · GitHub, which may be bit much/complex for you? For Python COM, you either need ActivePython or regular Python plus Python for Windows Extensions (e.g. pywin32).
For Applescript and Python, this post might be useful: osx - Calling AppleScript from Python without using osascript or appscript? - Stack Overflow
for the rest of the the cross-platform support, it's just generic python to parse command line arguments, etc. You may want to query what platform the script is running under using some standard Python modules (os, system). An example can be found in AutoPyDriverServer/server.py at master · daluu/AutoPyDriverServer · GitHub
Hope that helps.

Can't Run program in Debug Mode

To: [email protected]
cc:
Subject: Can't Run program in Debug Mode
Has anyone else experienced this problem? We have written a non-express
program that uses the Express generated services project as a supplier
plan. However, when we try running this program in debug mode about 50%
(or more) of the time we abend while Forte is trying to partition the
application. Since we have many database classes in our Business Model we
are wondering if Forte is timing out during the partition phase or if the
server partition is running out of memory . The following error messages
are produced by Forte. Any suggestions???
=======================
Error messages on client:
=======================
SYSTEM ERROR: Unable to start the partition testacadprogoffer_CL0_Part1 on
any
of the nodes to which it has been assigned. See the remainder of the
error
stack for more information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method overview.StartApplication
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on node
admin2.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Lost contact with remote server while trying to load
partition
testacadprogoffer_CL0_Part1. Check server log file for more information
about
the specific problem.
Class: qqsp_ResourceException
Error #: [1301, 102]
Detected at: qqem_IPartitionAgent::Startup at 5
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Tue Dec 02 12:56:00
Distributed method called: qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_Executor", (partitionId =
F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment CentralEnv
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Received close: Connection aborted (10053).
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
=======================
Log messages on server:
=======================
Attached to manager for node admin2.
aud Tue Dec 2 09:34:36 : Loading partition testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
aud Tue Dec 2 09:41:59 : Unloaded partition testacadprogoffer_cl0_Part2.
aud Tue Dec 2 09:49:44 : Loading partition testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
aud Tue Dec 2 10:00:12 : Unloaded partition testacadprogoffer_cl0_Part2.
aud Tue Dec 2 10:18:34 : Loading partition testacadprogoffer_cl0_Part3
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
aud Tue Dec 2 10:27:00 : Unloaded partition testacadprogoffer_cl0_Part3.
aud Tue Dec 2 10:47:03 : Loading partition
EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of agent
owner's partition.
aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
aud Tue Dec 2 11:09:26 : Unloaded partition
EvaluateApplRequirementsBO_CL0_Part1.
aud Tue Dec 2 12:36:14 : Loading partition testacadprogoffer_CL0_Part1
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
aud Tue Dec 2 12:45:17 : Unloaded partition testacadprogoffer_CL0_Part1.
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:49:01
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in application
"Forte Runtime", pid 14020 on node admin2 in environ
ment CentralEnv.
FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:48:57
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
ERROR: TMgr.RunThread: task cm.Recv failed terminating.
Probably caused by a FATAL exception.
David Wilbur email: [email protected]
University of Windsor phone: 519-253-3000 ext. 2779
Windsor, Ontario Canada
-----------------------------------------------

Hi,
We have had the same problem in a non-express application
with a heavy server partition. In our case, the error was not
systematic, depending on the server workload at the time we
tried to partition and run.
The work-around we're using is to put the -fm flags (increasing the x
parameter to say 30000) in the 'server arguments' of your server
partition
properties in the partition workshop. Note that if your server is a Unix
platform,
you need to put double-quotes before and after the parenthesis in the -fm
syntax.
Hope this helps,
Vincent Figari
BTW, what Forte version are you using ?
On Tue, 2 Dec 1997 13:44:24 -0500 "David Wilbur"<[email protected]>
writes:
>
>
>
>
>
To: [email protected]
cc:
Subject: Can't Run program in Debug Mode
Has anyone else experienced this problem? We have written a
non-express
program that uses the Express generated services project as a supplier
plan. However, when we try running this program in debug mode about
50%
(or more) of the time we abend while Forte is trying to partition the
application. Since we have many database classes in our Business
Model we
are wondering if Forte is timing out during the partition phase or if
the
server partition is running out of memory . The following error
messages
are produced by Forte. Any suggestions???
=======================
Error messages on client:
=======================
SYSTEM ERROR: Unable to start the partition
testacadprogoffer_CL0_Part1 on
any
of the nodes to which it has been assigned. See the remainder of
the
error
stack for more information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method overview.StartApplication
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on
node
admin2.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Lost contact with remote server while trying to load
partition
testacadprogoffer_CL0_Part1. Check server log file for more
information
about
the specific problem.
Class: qqsp_ResourceException
Error #: [1301, 102]
Detected at: qqem_IPartitionAgent::Startup at 5
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Tue Dec 02 12:56:00
Distributed method called:
qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_Executor",
(partitionId =
F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Network partner closed connection. This usually means
the
process at the other end of the wire failed. Please go look there
and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Received close: Connection aborted (10053).
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
=======================
Log messages on server:
=======================
Attached to manager for node admin2.
aud Tue Dec 2 09:34:36 : Loading partition
testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
aud Tue Dec 2 09:41:59 : Unloaded partition
testacadprogoffer_cl0_Part2.
aud Tue Dec 2 09:49:44 : Loading partition
testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
aud Tue Dec 2 10:00:12 : Unloaded partition
testacadprogoffer_cl0_Part2.
aud Tue Dec 2 10:18:34 : Loading partition
testacadprogoffer_cl0_Part3
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
aud Tue Dec 2 10:27:00 : Unloaded partition
testacadprogoffer_cl0_Part3.
aud Tue Dec 2 10:47:03 : Loading partition
EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of
agent
owner's partition.
aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
aud Tue Dec 2 11:09:26 : Unloaded partition
EvaluateApplRequirementsBO_CL0_Part1.
aud Tue Dec 2 12:36:14 : Loading partition
testacadprogoffer_CL0_Part1
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
aud Tue Dec 2 12:45:17 : Unloaded partition
testacadprogoffer_CL0_Part1.
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
FATAL ERROR: ************* Out of Memory, requested (1K) available
(0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:49:01
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in
application
"Forte Runtime", pid 14020 on node admin2 in environ
ment CentralEnv.
FATAL ERROR: ************* Out of Memory, requested (1K) available
(0K)
Class: qqsp_ResourceException with ReasonCode:
SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:48:57
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
ERROR: TMgr.RunThread: task cm.Recv failed terminating.
Probably caused by a FATAL exception.
David Wilbur email: [email protected]
University of Windsor phone: 519-253-3000 ext. 2779
Windsor, Ontario Canada

Is there any way to run signcode.exe program under background mode

Hi everyone,
I am finding the solutions to build the project automatically but the situation is still unchanged. When building the project i have use the signcode tool to sign my .cab files therefore the system shows me the "Enter Private Key Password" dialog and ask me to enter my password into the Password field.
If all you guy have any ways for packing the project by the mechanism of the running signcode program under background mode. Below is my script.
[b]signcode -spc ms.spc -v ms.pvk -n abc.cab -i URL -t http://timestamp.verisign.com/scripts/timstamp.dll abc.cab
Thank you for your ideas and regards
Tan

Hi,
you can use the tool signcode-pwd to automate the signing:
http://www.stephan-brenner.com/blog/?page_id=9

Run a program without command line

Hello,
I was wondering if there was a way to run a java program without compiling the code and giving the 'java' command at the command prompt.
For example, I want to put my program on a cd with all the necessary components for it to run on any windows system, regardless of whether there is any java technology already on the machine.
Thanks

Batchfile, look it up on google, its pretty self explanatory. um, I'll try to explain the basics......
Ok, to create your own batch file, open notepad and then save the file with .bat instead of .txt
A batch File is a series of system commands, so, for example, if you wanted your batch to run a file located at c:\temp, the first line of your batch file should just have word.exe c:\temp\filenamehere.doc, for example, this is a line from a batchfile I made:
excel.exe g:\tmp\Andy_Test.xls
a batch file can contain many commands and they will all execute sequentially.
if you want to open your program from a cd, I would think, although I have never done it, that you should
make a batch file that reads something like:
"D:\foldername\filename"
or i guess you could simply do it on c drive like this if your java program was poop.java
"c:\myfolder\myfolder2\myfolder3\java poop"
you couild even compile it before you run it
"c:\myfolder\myfolder2\myfolder3\javac poop.java"
"c:\myfolder\myfolder2\myfolder3\java poop"
also, if your java app is a GUI, I would run it like this:
"c:\myfolder\myfolder2\myfolder3\javaw poop"
Go here to learn more about batch programming, I actually don't know that much about it.
http://www.computerhope.com/batch.htm

Two operating systems in one computer - Running a program

Hi.
I have just installed two operating systems in my Thinkpad: windows 8 and windows 7. Is that possible to run a program, say Photoshop, MS Office, installed in windows 8 OS while I am running windows 7? I do not want to reinstall all the programs in windows 8 when using windows 7 because they are still in the same computer.
I tried to clicked on a program (from W8 Program x86). It asks for serial keys. I entered but it said that i do not have sufficient priviledge???
One more question:
I have an external hard drive. Is that possible when I install a program on that external hard drive, instead of internal hard drive, and run from that external hard drive? I mean: I install a program on external hard drive, then run that program in external HD from other computer?
I hope to have your insight solutions for this problem.
Thank you
Solved!
Go to Solution.

Basically all more advanced programs cannot be run this way. They utilize registry entries, app data, environment variables etc. hence are tied to the OS they are installed on.
Some simple applications, which don't require to be installed or have a portable version will work. This list does not include Office or Photoshop.
The answer for the external hard drive is the same. You'll need a "portable" application, which doesn't store any OS or user specific information.
You can look here http://portableapps.com/ for applications that are not tied to an OS.

Using LabView to run VB program with parameters

Hi,
It's my first message here so I hope I am doing things correctly. I tried to do some research before asking and I found a lot of good informations but right now, I seem to be stuck.
I am quite new to LabView, I did few VIs here and there but nothing really "serious". I am currently working on a LabView interface that deals with VB, Excel macros and Data extraction from Text file.
The VB program is in charge of a motor position, then, some Excel macros are used to do some measurement and the results are written in a text file that I use to plot some graphs.
The VB program I made give the window I put in the picture in the attached files. Basically, you have to enter some values in those TextBox then click on Move and the motor will move. When you click on the button Home, the motor moves back to the position "0", no need of the two TextBox. In my labview interface, I created two ComboBox that contain all the possible values for both of the TextBox of my VB program. What I would like to do, when I click on my "Measure" button on LabView that initiates the VB program, is that it can fill the two TextBox from VB with the data entered in my LabView ComboBox and then run the program, simulating a "click" on the Move button.
Right now, I found a VI (included in the attached files) that runs my VB program from LabView (I use it as a Sub-VI) but I still have to manually put the values in my VB program. My goal would be that when I click on my LabView button to start my measure, the motor moves but the VB program doesn't show up for the user to manually enter the values he wants.
I hope I was clear but if you need any clarification.
I did the the VB program myself.
I can also link the LabView interface I already created if need be.
Thanks for your help,
Baptiste
Attachments:
Moteur.png ‏5 KB
lancerEXE.vi ‏9 KB

First, thank you for your answers.
I know that I don't need to use VB or LabView. I just want for myself to be able to use LabView to manage a program in VB, one in VBA and use data from a text file. I know I could write everything in VBA and that would get the job done. The thing is I want to get away from VBA and Excel as much as I can. In the future, the plan would be to re-write my VBA program with LabView but as of now, I just want to use LabView to manage everything. I know I don't really need it but I want to learn how to do it and have something that works.
So I would like to know if there is way to do what I wish to do, running my VB program with parameters coming from LabView.
Thanks

When opening a PDF in IE 10 with Enhanced Protection Mode it displays "This website wants to run acropdf.dll"

I am running my application which requires JRE on Internet Explorer 10. Since the IE need to run in 64 bit mode, we have enabled the "Enhanced Protection Mode" in Security option of Internet Options in Advanced tab. But my application also opens
up PDF in the browser, when the page with PDF is invoked it displays "The webpage wants to run 'AcroPDF.dll'. If you trust this site, you can disable Enhanced Protection Mode for this site to run the control.(Disable)(Always Ignore)". And on
clicking any option the PDF is not displayed.
We would not be able to disable the Enhanced Protection Mode as the 64 Bit JRE would not be invoked for other part of the application.
Please let me know how to resolve this issue.
Regards
Navin

... and/or
Configure Adobe Reader to not use a Web Browser to open PDF documents... (see the Adobe.com for admx files to apply this setting by group policy) (
http://forums.adobe.com/thread/392489 )
Start>Adobe Reader>Edit>Preferences>Internet>uncheck "Display PDF in browser"
It seems that Adobe have recently changed the location of that setting in Adobe Reader (at least on 11.0.4). They've now hidden it under Edit > Accessibility > Setup Assistant > Then on page 5 of 5, there's a tick box to toggle 'Display PDF
documents in the Web Browser'.
However, it doesn't work like it used to though, as it won't just open a PDF in Adobe Reader instead of the browser. It will instead ask to disable Enhanced Protected Mode to run acroPDF.dll.
And if you try disabling the Adobe PDF reader add-on in Manage Add-ons to try and force it to open in Reader, then when you visit a PDF link, you just get the same blank page (shown below) with the black crossed out circle in the top left, but without the
message bar at the bottom of the window. The only way to open the PDF is to either turn off Enhanced Protected Mode and allow acroPDF.dll to run or if there's an original link to the PDF, right click and select 'save-as'.
I think it's about time Adobe released an x64 PDF viewer... Or at least there should be an open/save dialogue box in IE.
If you've got Reader 11.0.4 installed, you can try it for yourself with this PDF link:
http://helpx.adobe.com/pdf/adobe_reader_reference.pdf
(The below screenshot is with 'Display PDF documents in the Web Browser' UN-ticked in Adobe Reader settings, so it should open in Reader instead. But it doesn't. And with the Reader add-on disabled you get the same page, but without the
message at the bottom.)

Everytime I open my iTunes it says "Running iTunes in 64-bit mode requires Mac OS X 10.7 or later" how do I fix this?

Everytime I open my iTunes it says "Running iTunes in 64-bit mode requires Mac OS X 10.7 or later" how do I fix this?

If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

Batch to open xp mode then run a program inside xp mode

Similar Messages

Maybe you are looking for