Batch valuation with different price control
Hi experts,
Our requirement is to combine batch valuation and split valuation for the same material. We want to have valuation by batch (1 price for each batch). However, we need to classify the material into 2 types because of price control.
Example:
We classify batches into 2 types.
- in-house production (Price control S)
- purchasing (Price control V)
Make use of user exit, we may have batches starting with:
- PRD000001, PRD000002, PRD000003...
- PUR000001, PUR000002, PUR000003...
Our question is:
How can we achieve the requirement where sometimes we want S and sometimes we want V at batch level?
We understand that we can change the price control in material master after the batch is generated. But is it possible to change price control at the same time when batch is generated?
Please feel free to give any idea. Thanks a lot.
It is possible to have batch specific valuation by using valuation category X. This way, you will have a valuation type for each batch.
If the batches are created in advance (and not during material movements), then it is possible to have a separate price control and valuation class depending on batch number.
In your case, since the batch nomenclature for inhouse produced and purchased are different, it can be done without confusion.
Regards,
Aroop
Similar Messages
-
Back posting with different price control
Hi All-
One user is trying to do MIGO with posting date 31-Mar-2010 but the price control was changed to standard from moving average effective from today. So there is an error "Back posting allowed only with same price control"....cannot process further..
how to solve this problem?yes it is not a problem. It is standard SAP process. you need to do back posting with same price control
-
Stock transfer between plants in a company with different price
Hi, expert,
i want to transfer materials between plants inside a company with different price which set by supply plant randomly, not the valuation price, how can i achieve this?
Thxs & best wishes,
DavidHi,
In short, you cannot.
Within SAP you cannot make a profit or loss by transferring an item between two Plants within the same company code.
This is not necessarily an SAP restriction as such, it is due to basic accounting rules.
The company code is seen as the legal entity for accounting and so if a movement within that company resulted in a loss or profit then this would break the rules.
I am not saying that it is impossible to set it up this way (nothing is impossible) but I personally recommend that you find another way of achieving this. Trying to modify the system to break such an important rule will definitely cause problems.
In previous implementations I have used the following option.
Simple use basic STOs that transfer the items at the material valuation price. But then at the end of each month produce a report that shows what materials have been transferred between the relevant plants and at THAT stage make a financial posting to reflect the "benefit" that has been realised (based on prices held in a new table, that represent the price that would have been charged).
It does appear to be a failing of the SAP system but it really isn't. What it normally indicates is that somehow the wrong org structure may have been built and perhaps the two plant should really be attached to separate company codes (especially if you need to show "profits and loss" in this way)?
Steve B -
Items in the shopping cart appear with different price than in the catalog
Hi All,
We are running SRM 5.0 (Classic Scenario) with external catalogues.
After selecting items from the external catalogue and transferring them to the shopping cart, the items appear with different price(the problem exists in the productive system)
The strange thing is that there is no dependence or sequence between the differences. For example, in one shopping cart, one item is with correct price, the price of the other item is not correct (when I click on the icon which is showing item details in the catalogue, the price is different than the one in the shopping cart). Sometimes the difference is significant, sometimes not - if the item price in the catalogue is 22.34 EUR, in the shopping cart is 21.22EUR or if the item is 45.62EUR in the shopping cart is 45.60 EUR. There is no logic.
I tried to create a shopping cart in the support system, with the same items from this catalogue, and they are sent back in SRM with the correct prices.
I traced all OCI parameters, sent from the supplier catalogue, and everything is correct.
At the example given below the price in the shopping cart ordered in the productive system is 69.00CZK, and after that during the test the correct price of 73.870CZK has appeared.
NEW_ITEM-DESCRIPTION==Durable-KeyClip-keytag%2C+black
NEW_ITEM-MATNR==
NEW_ITEM-MATGROUP==
NEW_ITEM-QUANTITY==10
NEW_ITEM-UNIT==EA
NEW_ITEM-PRICE==73.870
NEW_ITEM-PRICEUNIT==1
NEW_ITEM-CURRENCY==CZK
NEW_ITEM-NEW_ITEM-LEADTIME==1
NEW_ITEM-VENDOR==
NEW_ITEM-VENDORMAT==0176%2F1957001
NEW_ITEM-MANUFACTCODE==
NEW_ITEM-MANUFACTMAT==
NEW_ITEM-CONTRACT==
NEW_ITEM-CONTRACT_ITEM==
NEW_ITEM-SERVICE==
NEW_ITEM-EXT_QUOTE_ID==
NEW_ITEM-EXT_QUOTE_ITEM==
NEW_ITEM-EXT_PRODUCT_ID==23109
NEW_ITEM-EXT_SCHEMA_TYPE==UNSPSC
NEW_ITEM-EXT_CATEGORY_ID==55121504
NEW_ITEM-LONGTEXT_1%3A132==Durable-KeyClip%0D%0Akeytag%2Cblack%0D%0A%0D%0A6pc
I checked the error log in SLG1 for BBP_OCI, and no error message exists. In my opinion the problem can be in supplier system, because otherwise all items will be with wrong price. And at the moment, there are shopping carts in which all items are with the correct price!
It is not something in the user profile, because in one shopping cart created by one user some items are correct, some of them not.
I also checked with the supplier, they said that they haven't change the price, recently.
Has somebody of you met this problem?
In the IMG-> Define External Web Services (Catalogs, Vendor Lists etc.) I have set all parameters for the standard call structure: the URL of the supplier, our company ID and password for their catalogue.
In the Detail view for the catalogue, the following parameters are set
u201CAdditional functions in the product catalogueu201D field:
- Display product data again in the catalogue
- Validate product data from SAP Enterprise Buyer
- Find supply sources
u201CTechnical Settingsu201D field
- Use Error Log
Thanks,
DesiThat means that we are not maintaining material numbers in SRM, so there are no predefined price or info records for that materials in R/3 system, or in SRM.
In the set up of external catalogues, validation of the price is set. Which means that, if a new shopping cart is created from already existing one, and meanwhile, a change of the price is done by the supplier in the catalogue, the new item price will be adopted in the shopping cart.
No prices are maintained in the SRM system, everything is from the supplier catalogue.
Desi -
Same Batch Number with different characteristics value
Dear Gurus,
I have the following scenerio:
The finished goods should be maintain in batch with external number and at the time of confirming the finished goods in co11n the client want to capture the finished goods value like length, width and diameter.
So we propose the batch characteristics with class type of 022 for finished good and we maintain the character as length, width and diameter under the batch class 022 and assign the batch class in finished good classification view.
Now the requirement is we want to capture the batch characteristics value length width and diameter with same batch number for multiple confirmation.
Example:
Confirmation Batch number batch Class Length width Diameter
1 1000 022 100 50 20
2 1000 022 120 25 10
3 1000 022 150 70 30
Now at present we are trying to capture the batch characteristics with same batch number but our standard system will not allow to maintain the different batch characteristics value under same batch number. If we overrite the batch characteristics in msc2n transaction the last value maintained be copied to all batch number. but we want same batch number with different batch characteristics value.
Please share your idea and try to solve..
Regards,
VimalDear Vimal,
It is not possible to maintain multiple batch characteristics in one batch.
Work around is to create original batches and assign to your production order. During CO11N, generate one batch per confirmation. There is a report in batch information cockpit to link between original batch and batch per confirmation.
Rgrds, -
Material purchase with different price
dear all,
please let me know standard reports in sap which can understand me the material purchase with different prices along with period.
thanks in advaceHi,
Please refer MBEW & MBEWH tables. If the you want a report then go for a simple SAP Querry to meet your requirement.
regds,
CB -
Duplicate qty with Different Price after discount column in Inventory Posit
Hi,
I am getting Inventory duplicate qty with Different Price after discount column in Inventory Positing List Reports When I make A/R credit memo thru DI API.
With regards,
Venki .Ahi
you can just see the above given data there is a filed total_qty there are two rows showing 0 why it happens i dont understand because i wrote same as for others. all were showng what my input but when the prod_id repeats then it was not taken the total_qty it wll show me 0
Please Guide
Thanks And Regards
Vikas Snghal -
Price valuation with standard price in case of external procurement
Dear All,
I have the following scenario with my client.
All the materials will be valuated with price control S, whether procurement type is E or F. We don't have any problem if procurement type is E. But where as if procurement type is F and price control indicator is S, the system calculating the moving average price and as well as standard price is also updating for some materials. For some materials there are not moving average prices.
1. Can any one tell me when SAP calculates both moving average price and standard price? is there any setting to be done.(procurement type F and price control S)
2. there are differences between moving average price and standard price, ofcourse there may be a difference, but in some cases the difference is more and higher than the standard price, this may cause financial loss to the company. How can solve this.
full marks will be awarded.
thanks & regards,
Ramesh BalivadaHi
Moving average is updated for External purchases although price control is standard price in all cases where there are movements in materials i.e., when they are purchases...
Check for the materials where there are no updation of moving average and externally procured materials, there might not be any purchases..
There would be no losses as even though it is calculating mov avg price, the stock, consumption is calculated with std price only.
Check both the cases where there are std prices and check for cases where there are both prices getting updated.
Regards,
Suraj -
How to calculate Total Price based on a sqm rate with different price points?
Hi,
I'm guessing this is a script solution but I've never done any scripting so though I'd ask you guys...
I have a form where I'd like to calculate the total price of some carpet based on the price per sqm.
- The user enters the carpet quanitity required.
- There are different price points for 1-20, 21-60, 61+sqm (each with their own hidden fields containing the price value).
- The Total Price field assesses the quantity ordered, and multiplis it by the relevant square metre rate.
Is this achievable?
I'm guessing any solutions are placed into the "Custom Calculation Script" field too?
Thanks in advance!Yes. You can use something like this as the custom calculation of the total price field (you might need to adjust the field names):
var sqm = Number(this.getField("SQM").value);
var rate = 0;
if (sqm>0 && sqm<=20) rate = Number(this.getField("Rate1").value);
else if (sqm>20 && sqm<=60) rate = Number(this.getField("Rate2").value);
else if (sqm>60) rate = Number(this.getField("Rate3").value);
event.value = sqm * rate; -
MIRO, enter one material with different price
Hi Experts,
i have one PO and the material number is 20MTF70301, the quantitiy is 3. Because of the material price is different(same material number) i need the enter them line by line. For example;
Material Plant D/C Amount Quantity
20MTF70301 1015 S Debit 1917,30 1
20MTF70301 1015 S Debit 794,55 1
20MTF70301 1015 S Debit 249,39- 1
But the system warning is like that "Double entries for material 20MTF70301 1015 are deleted". After this warning , system automatically delete last 2 line.
How can i enter same material line by line.
Thanks,Hi
It will naturally delete the two last items, just understand, You have the same material same vendor but want to have 3 different prices in three lines in One PO, are you not contradicting the basic idea which SAP follows, how do the in-fo recoprd will get updated? with which price?
It is not that you can not do , but for that you have to go for another PO for a different price and the vendor but not in the same PO.
Regards -
Purchasing info records with different prices for different packaging
Hi,
hope, someone can help me.
We have different prices for different kind of packaging, but all the material is bought in the same unit, i.e. kg.
Let's say, usually you buy x kg in a drum, but sometimes you buy y (or x) kg in a bottle or in a bag.
We won't allow variable order units. Even if we would, it's not helpful, because we always order kg.
So the price depends on a criterion - I don't know, which to take. And we want to maintain the different prices in the info records.
Is there a solution?Hi.
I went through the history of the problem.It seems that your base unit of measure is KG.Also you have mentined that same material is used in various plants.
You need to activate the variable ordering unit 2 in material master. This is present in the materila master Purchasing tab.Also note that this data is maintained at plant level. This will not have any impact on the materials which are presnt in the other plants.
After activating variable order unit in materal master. You need maintains the conversion factors from Order units to Base UOM.(Eg 1 KG = 1 KG, 1BOX = 10 KG etc)
Create inforecord for the material and maintain price in Base unit of measure.
In PO enter the order unit as BOX system will automatically calculate the price of BOX based on the conversion factors which are maintained in the material master.
I belive this is the simple and best solution for your requirement..
If you have any suggestions please let me know
Cheers
Umakanth -
Service valuation on different price
Dear experts,
My client business scenario is if a contractor fix the tiles on ground floor,he will raise a bill for 1000 Rs. If he fixes the tiles on first floor, bill amount will be increase by 7% let's say 1000+70=1070/- So is there any standard functionality available in SAP like split valuation for service,i mean when i will select the valuation type as a floor, service value should be increase by 7%,if not please give me your suggestion how i will map this business process.
Waiting for your suggestions......
Regards
RahulNo. You can't use split valuation for service master.
You have to play with Purchase order.
Create new a condition type as Floor Charges.
When you make the PO, you just have to give the percentage for the condition type.
Do not maintain the accrual key, then it will be calculated against main price.
For more details please refer the documents
SAP Service Configurations In SAP MM - Part 2
Pricing procedure Steps and Details in SAP MM -
Split valuation - material with price control V
Hi,
I have created material with split valuation ,ie val category as Z (auto batch).. and i did gr. and in mm03 i have maintained the pr control as V .. and later po and gr . when i checked in MM60 its showing the parent material and the child mat ie valu types/ batch materials are also in V... it suppost to have with S.. is there any customization need to have S price control for the child/ val type materials?? pls suggestHi UJ ,
Different price control are possible for different valuation types based on Valuation category , but this doesn't hold good for Valuation Category X- Auto Batch as there are no valutaion types linked to it in Config.
Therefore system proposes the same price control as that of parent material incase of Valuation Category(X)- Auto Batch
Regards
Ramesh Ch -
Batch Management with Moving Average Price
Hi all,
I got a question here. If we use batch management in SAP with our price control as 'V' (MAP for Moving Average Price), and we do good issue out by batch, will the system credit my stock based on MAP value or the actual value (actual PO price by batch)Any kind soul can helps me??
-
Different price for split valuation
hai
for split valuation material shal we define different pricing?
for ex :
materail - Pen
we split the category is "colour "
the valuation type is red , blue ,black (with different prices)
red - 12 Rs
blue -15 Rs
black -10 Rs
i know that we can maintain in material master record .
But we need while doing THE P.O for red colour pen the price must be Automatically taken from the system as 12 Rs,
and same as blue colour pen as 15 Rs , and for black colour pen as 10 Rs.
i searched in "INFO RECORD" .we can only define the "valuation type " .we cant able to dife different pricing for split valuation material in info record
where we have to maintain the different pricing for valuation material .kindly explain.
regards
christo.hi,
you need maintain records for your pricing condition say (pb00).For that u need to create a table in m/03 with combination of material valuation type , price.and then assign the table in accesses sequence of the pb00. then maintain records in mek1 with key combination of the above created table.it will help u.
Maybe you are looking for
-
Why does remote app on Applte TV 2 not work when using icloud only?
-
I have just bought an iPad, partly to check that my websites work OK on mobile devices. When I load a page with several jpgs (e.g. one 1920x720, then 8-10 800x800px), only the first few are shown. If I remove the large one, that sometimes fixes th
-
Lion OSX and Keynote - One BAD combination
I've a LOT of PROBLEMS with my KEYNOTE PRESENTATIONS (> 500MB).... PLEASE HELP ME.... I need the app working like a 4 days ago in my SL... I don't Know WHAT I HAVE to DO....
-
When I try to preview a song before purchasing I receive the message that the movie cannot be played. Now I am not looking at movies or videos, so please tell me what's going on????
-
So I've been learning all of this over the past few days from the lynda.com videos, and I've gotten to the point where I'm trying to create a new page from my template, but every time I try it only has the code up until the first editable attribute a