Battery after update and display

When i use ios first time all perfect but appears a display trouble and battery after update drain faster

What do you mean by "display trouble"?
Yes, the updates seem to make the battery drain faster.

Similar Messages

My performance is very slow when I run graphs. How do I increase the speed at which I can do other things while the data is being updated and displayed on the graphs?

I am doing an an aquisition and displaying the data on graphs. When I run the program it is slow. I think because I have the number of scans to read associated with my scan rate. It takes the number of seconds I want to display on the chart times the scan rate and feeds that into the number of samples to read at a time from the AI read. The problem is that it stalls until the data points are aquired and displayed so I cannot click or change values on the front panel until the updates occur on the graph. What can I do to be able to help this?

On Fri, 15 Aug 2003 11:55:03 -0500 (CDT), HAL wrote:
>My performance is very slow when I run graphs. How do I increase the
>speed at which I can do other things while the data is being updated
>and displayed on the graphs?
>
>I am doing an an aquisition and displaying the data on graphs. When I
>run the program it is slow. I think because I have the number of
>scans to read associated with my scan rate. It takes the number of
>seconds I want to display on the chart times the scan rate and feeds
>that into the number of samples to read at a time from the AI read.
>The problem is that it stalls until the data points are aquired and
>displayed so I cannot click or change values on the front panel until
>the updates occur on the graph. What can I do to be a
ble to help
>this?
It may also be your graphics card. LabVIEW can max the CPU and you
screen may not be refreshing very fast.
--Ray
"There are very few problems that cannot be solved by
orders ending with 'or die.' " -Alistair J.R Young

I can no longer open any attachments that are sent to me. I click on and get cannot preview (but have had this for ages). I am clicking on download and nothing happens. It does not download. I clicked to install a new version after updating and clicking r

I can no longer open any attachments that are sent to me. I click on and get cannot preview (but have had this for ages). I am clicking on download and nothing happens. It does not download. I clicked to install a new version after updating and clicking repair. But still the attachments won't open including invoices I have received today. It is all attachments not just pdfs.

Angela Richens wrote:
It is all attachments not just pdfs.
Then most likely it is not caused by Adobe Reader.
Anyway, perhaps someone has some idea, if you give us some details: operating system, browser, email client, ...

I purchased a Mac book pro in oct 2011, I restarted it after updating and it,s stuck on apple symbol, I hit command R while restarting and clicked on disk utility. It says disk can't be repaired, apple wants $249 to tell me what's wrong. Please help!

I purchased a mac book pro in oct 2011, I restarted it after updating and it,s stuck on apple symbol, I hit command R while restarting and clicked on disk utility. It says disk can't be repaired, apple wants $249 to tell me what's wrong. Please help!

What Apple store told you they wanted $249.00 to tell what is wrong?
If this is a 13" Macbook Pro then that is the cost of the Extended Applecare warranty. As you are outside the 90 days of Free Phone Support then what Apple told you is that to get Phone Support you would either need to pay $45 per phone call or pay $249.00 for the Applecare extended warranty which comes with 3 years Free Phone Support from date of purchase.
Or you can take it to a Apple Genius Bar and have them look at it for Free.
Every Mac comes with 1 year warranty and includes only 90 days of phone support. You can buy the extended Applecare warranty anytime within the first year of ownership, IE until the 1 year warranty runs out.
I suggest you have your computer looked at by either an Apple Authorized Repair Center or Genius Bar and then before the 1 year warranty runs out buying the extended warranty

HT4972 After update and restore i am getting a message like ,Your iphone could not be activated because the activation server is temporarily unavailable.also i am getting no service message

After update and restore i am getting a message like ,Your iphone could not be activated because the activation server is temporarily unavailable.also i am getting no service message and also connected to wifi

mine is and before what the other guy wrote, it said your iphone could not be activated because we could not reach the server

HT1365 How can I get my iPhone 4 to update my updates from my app store of it keeps telling me error 3150 or it tell me to refresh the page after updates and the updates are still there asking me to update them again

How can I get my iPhone 4 to update my updates from my app store of it keeps telling me error 3150 or it tell me to refresh the page after updates and the updates are still there asking me to update them again?

Make sure iTunes on the computer is logged into the account on the phone.
Plug the iPhone in.
In the popup window warning about wiping your phone, hit cancel.
In the left pane of iTunes, the phone icon should be there.
Right click on it, select transfer purchases.
Note: this will only transfer music bought from iTunes. Not mp3's from amazon or ripped from CD's.

I have a new iphone 5. After update and download some programs I can not just turn it on and shown in the LCD "iTunes" with a picture of a USB cable. - Alguine can help solve the problem. thanks

I have a new iphone 5. After update and download some programs I can not just turn it on and shown in the LCD "iTunes" with a picture of a USB cable. - Can anyone help me solve the problem. thanks

Its trying to tell you to connect it by usb to a computer to reflash a failed firmware flash
You should comply

Two days before my iphone 5 battery was expand and display screen came out and now there has some gap between frame and display.so how it will happen and i already got before months.now i need to backup all the data to icloud before through out.

two days before my iphone 5 battery was expand and display screen came out and now there has some gap between frame and display.so how it will happen and i already got before months.now i need to backup all the data to icloud before through out.
https://www.dropbox.com/home/iphone
https://www.dropbox.com/home/iphonehttps://www.dropbox.com/home/iphone

Make an appointment at the genius bar of your local Apple Store. The phone has a 1 year warranty. If it's no longer under warranty, a replacement is $269.

IPhone heating up, laggy, slow and low battery after updating to 7.1.1

I mean, after upgrading to 7.1 my iPhone 4 worked very well, actually worked pretty fast, I felt like I'm back on iOS 6, and liked the iOS 7 for the first time. But now after updating to 7.1.1, battery drains very quickly, it's so slow, and laggy, also iPhone heats up really fast when I'm using it. Is it the same to you or it's happening just to me? My friend also called me last night and said "Is your iPhone heating up like mine", it seems I'm not the only one??
Also, iPhone heats up mostly around the camera...

Even my iphone 4 was heating up like ****, i cant even touch it with my bear hands... Too much heat, too much draining of battery. Even normal usage without any data connection & wifi, i am getting 2-3 hours backup. That is too ridiculous. I'm going crazy with this bloody 7.1.1 update. I am starting hating iphone for the first time because of this issue...

VMs won't start after updates and reboot.

I need some help.
I installed the November 2014 MS updates last night. I installed them on my lab Hyper-V box. The Hyper-V box is joined to a domain but is not a domain controller. It is Server 2012R2 with Hyper-V with all previous patches applied. I had two VMs configured
on the box. The VMs were a 2012R2 server and a Windows 8.1 box. Both were running fine. In fact I shut them down before I did the Microsoft Updates on the server.
The issue I describe below was not present until I did the updates and rebooted. The server and the associated VMs had been running fine for months. These updates are the ones that my SUS server provided to this server.
After I rebooted the server I could not restart either VM. I kept getting the same error that is listed below. I tried DELETING the VM from Hyper-V manager and then building a new VM and using the old vhdx. Again NO LUCK. I even tried CREATING a new VM and
I got the same problem.
(Additional Note: I appeared as though I was able to delete the VM from Hyper-V Manager. Hyper-V Manager displayed 'Destroying....' for some period of time and then the VM was removed from Hyper-V Manager. However, recreating the VM did not solve the problem.)
Each time I get the following error displayed on screen.
'Unnamed VM' could not intiialize.
An attempt to read or update virtual machine configuration failed
'Unnamed VM' could not initialize (Virtual Machine ID)
'Unnamed VM' could not read or update virtual machine configuration: Ran out of memory (0x8007000E) Virtual machine ID B9xxxxxxxxxxxx
=======================
I adjusted permissions on the C:\ProgramData\Microsoft\Windows\Hyper-V folder. Opened it up to "Authenticated Users" based on a couple of TechNet articles that I found. NO luck
In the Hyper-V Config log I get the following entry,
The configuration store at'' is not accessible Unspecified error(0x80004005)
==========================
I also had these errors in the Windows Application log.
ID=1000 Source=Application Error Type=1 Message=Faulting application name: vmwp.exe, version: 6.3.9600.17334, time stamp: 0x5407c751
Faulting module name: vsconfig.dll, version: 6.3.9600.16384, time stamp: 0x5215db66Exception code: 0xc0000194
Fault offset: 0x000000000001966c
Faulting process id: 0xb84
Faulting application start time: 0x01cffe274d55ea6b
Faulting application path: C:\Windows\System32\vmwp.exe
Faulting module path: C:\Windows\System32\vsconfig.dll
Report Id: d4210450-6a1a-11e4-80d6-0019b9eed814
Faulting package full name:
Faulting package-relative application ID:

OK,,so I solved this issue by removing the Hyper-V role and then readding the role. The permissions of C:\Programdata\Microsoft\Windows\Hyper-V
and C:\Users\Public\Documents\Hyper-V definetly changed
as a result of re-adding the role.
All required updates (as supplied by WSUS) are applied also.

Latest update and display changes

after the latest update my display changed to higher resolution and when I go inot the preference pane I only show two available resolutions.
What can I do to fix this
Thank you for any help

I tried adjusting the value of layout.css.devPixelsPerPx but that did not help. The only thing that temporarily fixed my display issues was to close Firefox- at that point the screen blacked out and reappeared in full view. As soon as I open Firefox the screen blacks out and reappears showing only a portion of my desktop and all the icons not visible are no longer clickable because the mouse cursor can't reach them.

Is it possible to restore Gamecenter after update and restore?? After update, tried logging into Gamecenter and it says that the user name is already taken. Yeah, I know..... by me!!!

One of my kids ipods needed an update. It wouldn't let me do it via the itouch (like the other 2 itouches did). I had to connect to the PC, sync, update and then restore. Once I did, the apps could be downloaded again via icloud (which wasn't on the itouch before) but progress on games that were through Gamecenter did not transfer. Tried logging into Gamecenter and it states the user name is already taken. Yeah, I know it's already taken, BY MY DAUGHTER!!! Apparently she has a dragon game app that she manages through Gamecenter that she has worked her way to level 22 and now it is all gone. It wants her to restart from level 1. I know this isn't life or death and not like losing work data etc. But to a 9 year old who has spent $40 of her own money on gems, coins etc....... this is the end of the world. LOL. I do want to try to help her, I just don't know how.

Thank you. After posting I started to search for Backflip studios and found this support id. I had meanwhile created a new nickname, very similar to the original one, and requested that they swap the advanced world to the new id. I sent this last Saturday evening. This morning (so effectively on their first workday after my request!) I received a kind response from Rachael that they had swapped the parks. Like your daughter my son couldn't believe his eyes. Thank you for your post, original and reply, I hope others will find it too and that Rachael can keep up such excellent support. It means a lot...

Error in updating and displaying ouput in JSP

Hi im doing project using jsp files.In part of my project there is vote page and vote result page.
my vote_page.jsp
<%@ page import="java.util.*" %>
<%@ page import="java.sql.*" %>
<%@ page import="java.text.*" %>
<%@ page import="java.sql.Date" %>
<%@ page language = "java" %>
<%! int ctr=0;%>
<%! String[] songs=new String[10];%>
<%
try{
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection connect;
connect=DriverManager.getConnection("jdbc:odbc:RegisterDataSource");
Statement state;
state = connect.createStatement();
String strQuery1 = "SELECT title FROM ItemEJBTable";
String str;
ResultSet result1 = state.executeQuery(strQuery1);
while(result1.next())
songs[ctr]=result1.getString("title");
ctr++;
connect.close();
catch(Exception e)
%>
<form method="GET" action="http://localhost:8000/Music/Vote_result_page.jsp">

Vote for your favorite song
 Songs
 
<select size="1" name="Song1">
<%
for(ctr=0;ctr<songs.length;ctr++){
%>
<option>
<% out.println(songs[ctr]);}%>
</option>
</select></td>
</tr>
</table>
<input type="submit" value="Vote" name="submit">and my vote_result_page.jsp
<%@ page import="java.util.*" %>
<%@ page import="java.sql.*" %>
<%@ page import="java.text.*" %>
<%@ page language = "java" %>
<%! int voteNum=0; %>
<%! String selSong=new String();
%>
<% selSong=request.getParameter("Song1");
out.println(selSong);
String selSong1 = selSong.trim().toString();
try{
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection connect;
connect=DriverManager.getConnection("jdbc:odbc:RegisterDataSource");
Statement state,state2;
ResultSet result1;
state = connect.createStatement();
state2 = connect.createStatement();
String strQuery1 = "update Vote_Info set Number_votes=Number_votes+1
where itemCode=(select itemCode from ItemEJBTable where title='"+selSong+"')";
state.executeUpdate(strQuery1);
String strQuery2="select Number_votes from Vote_Info where itemCode =
(select itemCode from ItemEJBTable where title='"+selSong1+"')";
result1=state2.executeQuery(strQuery2);
while(result1.next())
voteNum=result1.getInt("NumberVotes");
out.println(selSong+" got "+voteNum+" votes");
connect.close();
voteNum=voteNum+1;
catch(Exception e)
%>
<td width="82%" valign="top">


You voted for the song:

<%=request.getParameter("Song1")%>

<%= voteNum %> 
people have voted for this song so far.
<input type="submit" value="OK" name="submit">When i select song_no_1 and click on vote button on vote_page.jsp it directs to vote result page and displays that
1 person has voted for this song and this vote is not updating on table. When i go again to vote page and vote on song_no_2 it says that "2 person have voted this song" even if it is not voted before.
I dont no where the problem occurs pls help me for this.

sorry for double posting because i didnt got reply from first one so i thought that nobody have looked on that topic that's why i done this.

ITunes 10.5 won't open after update and System Restore

I upgraded to iTunes 10.5 days ago on my laptop running Windows Vista 32bit.
Download and install went ok. Tried to open iTunes it just won't load.
I click on the iTunes icon from the start menu or the desktop and only the "circle" signifying "wait" pops up for a few seconds then it goes away.
iTunes.exe shows up in Windows Task Manager for a few seconds, then disappears.
There is no error message or pop-up during any of this.
Quciktime Player and Quicktime both work though.
I had to do a System Restore for my laptop recently because it would not boot up correctly. It kept saying "loading" but never actually load, so I took out the battery and had to system restore it.
Please help and thanks so very much in advance!

iFOUND the Solution!!!
Go to Add/Remove Programs under Control Panel and for every program that is Apple - iTunes - Quicktime related RIGHT click on it and choose "Repair" and repair it. May take some time for each program.
Then, I got an error message saying:
"the file "itunes library.itl" cannot be read because it was created by a newer version of itunes."
Here, from the Start Menu, search "Apple Software Update" and update every program it says needs updating. I recently this week updated Quicktime to its latest version, but did so anyway. So I updated Quicktime and iTunes...restarted computer...and it worked.
That's how you do it. iTunes 10.5 works fine now. Hope it does equally well for you.

Airport Problems after update and trouble shooting

Hi There,
I have an Intel iMac and after updating airport i've been having problems with it. I'll be using the internet and all of a sudden it will just disconnect and cannot detect any network connections. Now, i've seen the other posting already about fixing this problem, and I have done what it says to fix the problem by moving the system configuration folder and the com.apple.systempreferences.plist file. After I do this, it works for a few hours but then i have the same problem again. The folder and the file is recreating and i have to follow the same steps and move them again, but then every few hours it keeps getting recreating. Is there something that i can do so i'm not constantly moving the files around and having to re-setup my network. Is there a way to reset Airport to the way it was before i installed the update?
Thanks

"Is there a way to reset Airport to the way it was before i installed the update?"
Of course you can erase your hard drive and reinstall up to 10.4.7, and not go any higher. The problem is the 10.4.8 update, or some part of it. The many other updates recently posted for different apps are not part of the cause, so those updates can be installed.
"Is there something that i can do so i'm not constantly moving the files around and having to re-setup my network."
Yes, once you've followed the "restart twice" instructions involving preference file deletion, it appears that by turning off AirPort before letting it sleep, restart, or shut down, those two files will not get the same corruption recreated. Afterwards, you should be able to turn on AirPort and after a slight delay of about six to eight seconds AirPort will be able to reacquire your network.
If you forget to turn off AirPort before sleep, restart, or shutdown, then those files will again be corrupted and you'll have to go through the process all over again. I ran through it about 50 times, changing this and that, and that's all I could come up with.
Hopefully someone else out there with a different perspective will be able to figure out what else needs to be done.

Battery after update and display

Similar Messages

Maybe you are looking for