Battery management system design for EV to monitor and to balance the Li-Ion cells' voltages using LabView, NI myRIO-1900 and LTC6804-2 IC
Hello,
I have NI myRIO-1900 and LabView 2014. I need to design a Bettary management system to monitor and balance the rechargable Lithium-Ion battery packs' voltages and charges using LTC6804-2 IC. I am facing some problems to program the IC for monitoring and balancing the cells' voltages and charges using LabView via NI myRIO. Can anyone help me to design this by giving some references and technques.
Thanks in advance.
Mohammad Hoque
[email protected]
Hi Mohammad,
I believe with EPS you can monitor the cells' voldates and charging. I'm not sure what you mean by balancing, though. Can you elaborate a bit more?
Thanks.
Similar Messages
-
Connecting a USB input of a Battery Management system sending CAN messages to Labview
I am new in working in Labview..... some guidance will be highly appreciated. ....
I have a Battery management system. It sends CAN signals via a USB interface. I need to control the Battery management system using Labview. So how do i read the CAN signals coming from usb in labview. I am not using a Data acquisition system of NI as my signals are already digital.Hey marco
The device has an application which is runs it. So this application runs the battery management system. What i need to do is to develop a LABVIEW substitute for this application, so that I will be able to communicate with the BMS using LABVIEW, instead of the application provided with it. -
Managed System configuration for SAP NW Java system in Solution Manager 7.1 SP10
Hi All,
I am doing Managed system configuration for my SAP NW 7.01 Java system and getting below error in step 6 create users SAPSUPPORT & SM_COLL_SID.
"An unexpected error occured. An error occured while processing the UME command READ_USER from agent <hostname> : Server returned: 302 Found "
I have checked my DAA as well as host agents are up and running fine. My Solution Manager is 7.1SP10.
Please suggest.
Regards,
ManishManish,
Which UME you are using? portal/ABAP/LDAP
Are you using the SOLMAN_ADMIN user while configuring.
Also check the below forum.
https://scn.sap.com/thread/1167282
Regards,
Raja. G -
i missed the system requirments for lightroom 5, i have vista, do i get a refund or can i download lightroom 4 and ps 4?
You can download LR4 from Adobe but you will need a serial number for V4 as the serial number for V5 will not work.
If you are still on Vista you really should look at upgrading to Windows 8 64bit as you will experience similar problems with other software. Vista was released in Jan 2007 which is 7 years ago, a long time in computer terms and was never very popular. Its current share of the windows OS is around 3% and going down so not much incentive for developing specific software support. -
@I run a Windows 8.1 - Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use it more the 2 corrections after a get a black background message that there is not enough memory) and the system stops running and a must restart is required. How do I fix this terrible problem?
If it requires a Photoshop CS5 re-install, (I belief that it may fix the problem) and re-install the two third party plugins (NIK Viveza) and (Onone Perfect Resize) how and where do I get to the proper Adobe upload page to do that.
I have tried to fix this problem by changing the memory allocations, I have spend many hours on it and are very disgusted with it but it needs to be fixed. The current memory settings are;
Ram available = 1588 MB
Range = 873 -1143 MB
Recommended Photoshop usage range = 857 however I have tried every setting to max and in between. Nothing works. Current setting = 1588 (max)
The Photoshop I use is registered, I have product # and order # .Contact NIK for updated/upgraded versions of their plug-ins. They have been having a lot of issues with their plug-ins.
-
How to obtain the table index in word use LabVIEW Report Generation Toolkit for Microsoft Office
I created a word templete and it had several tables. When I use the "Word Edit Cell" function in LabVIEW Report Generation Toolkit for Microsoft Office, the function need "table index", and I didn't find any function to get or set the table index in word document. How can I achieve my attention to write value to specified table cell using the "Word Edit Cell" function?
Thanks for reply!
YangAfreetHi yangafreet
You do not need to get the table index for the word edit cell.vi from anywhere. LabVIEW will automatically index all the tables in the document. See the attatched vi for an example.
Rich
Attachments:
Table Edit.vi 23 KB -
Hello everyone. I have my itunes account for some years, and i've purchased far too many apps and music. Now the company i work for, has to change my account in the iphone, in order to use the corporate mails and calendar. How can i keep my applications and music?
Read here:
http://support.apple.com/kb/ht5621
Changing your Apple ID to your current, working email address will not create another Apple ID, it will only change it to your working email address. -
i purchase Lightroom 6 upgrade and during installation the product won't download using the serial number provided. It then asks for serial number of previous installation (lightroom5) but does not recognise it once inserted. Please help!
Yes, I have a TLP license, so which kind of upgrade should I buy?
I'm an Italian user and I would prefer to contact support by web chat but I can't find it in the website, please can you help me? Thank you, I'm desperate! -
There were no results for If i buy locked iphone 5s( verizon) from usa can i use it in india ..and when i buy this ph is this mandatory that i have to choose the carrier plan....and one more qs after unlocking still the warenty is valid..plzz tell me officialy unlocking procidure in details...thank you..in advance...
Your question has been answered. Jailbreaking cannot be discussed here. If you buy a phone locked to a carrier, it would be down to them to unlock it, and that's very unlikely if you've only just got the phone. Locked phones are "cheap" for a reason - you're signing up for a contract and that subsidises the cost of the phone.
-
Oracle Real Application Clusters, Concepts manual, Release 9.2.
About scalability, it says that "poorly designed systems do not scale well on either single-instance Oracle databases or Real Application Clusters databases-poorly designed applications will likely experience performance degradation as demand increases."
What does it mean when it says "poorly designed systems". What features should my sistem have to scale well in RAC databases?krishh wrote:
Hi all,
I am very new to Labview, but I have to deal with somewhat difficult problem of remotely controlling the Laser in next room. The PC I will be using has already built labview software to control the laser if laser is closeby. But the laser is next door (~200-300 feet), and the PC which controls the laser also have the labview software to control the laser. Please suggest me how should I start communicating from my first PC to the laser (may be using the laser labview software or not). To start with I would be glad to find some reads or demonstrative examples or any suggestion which will head me to right direction.
I hope for great help.
Regards
Krish
It would probably be a good idea to start a new message on this rather than continue in this message thread. It seems to be a different situation you are asking about then what the original poster was doing.
How does the PC communicate with the laser if it is close by? Is it a serial connection? ethernet connection? GPIB? something else. If it is serial, is it RS-232, RS-485, USB? 200-300 feet is too far for an RS-232 or USB connection. But there are numerous products on the market that will adapt those serial protocols to either an RS-485 wiring setup, or put it out over an ethernet connection. So you can go RS-232 to RS-485 on one end. RS-485 goes to 4000 feet (depending on baud rate). Then on the other end another adapter converts it back to RS-232. I have also used a remote USB hub that connects to a LAN connection, and with driver software installed on the PC, it turns that remote connection into virtual serial port connections.
These are good devices that have worked for me. But if they would work for you all depends on how the PC connects to the laser now. -
System design for remote control
I just wonder which tech of ni I should use.
My system is one data center and some remote DAQ site. The communication is through WAN.
It need to
- start stop and schedule DAQ card from remote data center
- send realtime data back for display
- report the DAQ running status, such as online.
- send history data from site pc to center database
there are many choice, such as tcp/ip, data socket server, shared varible, remote panel, remote vi server, web server.
May I know which one is more fit for the application?
Thanks a lot.krishh wrote:
Hi all,
I am very new to Labview, but I have to deal with somewhat difficult problem of remotely controlling the Laser in next room. The PC I will be using has already built labview software to control the laser if laser is closeby. But the laser is next door (~200-300 feet), and the PC which controls the laser also have the labview software to control the laser. Please suggest me how should I start communicating from my first PC to the laser (may be using the laser labview software or not). To start with I would be glad to find some reads or demonstrative examples or any suggestion which will head me to right direction.
I hope for great help.
Regards
Krish
It would probably be a good idea to start a new message on this rather than continue in this message thread. It seems to be a different situation you are asking about then what the original poster was doing.
How does the PC communicate with the laser if it is close by? Is it a serial connection? ethernet connection? GPIB? something else. If it is serial, is it RS-232, RS-485, USB? 200-300 feet is too far for an RS-232 or USB connection. But there are numerous products on the market that will adapt those serial protocols to either an RS-485 wiring setup, or put it out over an ethernet connection. So you can go RS-232 to RS-485 on one end. RS-485 goes to 4000 feet (depending on baud rate). Then on the other end another adapter converts it back to RS-232. I have also used a remote USB hub that connects to a LAN connection, and with driver software installed on the PC, it turns that remote connection into virtual serial port connections.
These are good devices that have worked for me. But if they would work for you all depends on how the PC connects to the laser now. -
Need suggestions regarding a system design for incremental load
Hi,
Our client has a set of SQL Server tables which are being fully refreshed daily using views from DB2 source tables. We need to design an approach to load them incrementally.
We have a third party application 'XXX' which will provide us the changed records in the underlying DB2 tables into SQL Server tables daily. Let us call them CDC_<tbl>. This table will have the same schema of source and have a flag to indicate whether
it is an insert, update or delete record. From these CDC tables, we have to do the required transformations and do the insert/update/delete from the target table accordingly.
This approach would work easily for cases where there is only one source table. But when we have multiple tables joined together to load the target table, we are unable to design an approach. If on a particular day, an insert record comes in only one of
the source CDC tables, we will not be getting that row in the target since the other CDC table doesn't have a record for that particular key. We cannot join the SQL Server CDC table with source DB2 table since that will cause performance issues.
Please share your thoughts on how we can design an approach which will work in cases of join, union, group by etc. between source tables. We are open to suggestions on changes in CDC tables also since the third party tool is to be configured as per our design
needs.
Thanks in advance,
KPIf on a particular day, an insert record comes in only one of the source CDC tables, we will not be getting that row in the target since the other CDC table doesn't have a record for that particular key.
If I understand correctly, you extract data using DB2 views (some with joins) and then use third party CDC software to capture all changes made to the underlying DB2 tables. These changes are then applied to a transformed version of data extracted
from the views. If my understanding is correct, why use DB2 views at all? It seems to me the transformation process must have intimate knowledge of the underlying DB2 tables anyway in order to apply the CDC data properly.
Are you saying you are not getting the other CDC table row at all, or is it just that the CDC tables are not transactionally consistent at the time the changes are applied to the target? I think transactional inconsistencies should be addressed by
the third party CDC application. The other alternative as I see it is to query DB2 for a each CDC key to make sure you have the latest data during the transformation process.
Dan Guzman, SQL Server MVP, http://www.dbdelta.com -
It's not actually my account but it was already in the iPad when i first bought and i've been using this ID for more than three years now, but all the email and verifying email from iTunes get send there instead of my own email, and even that i tried to log in the person's mail it was deleted and no more excisted so i can't verify to iCloud , what can i do? Can i replace the email of the ID with my own?
Please help.All downloads from iTunes are tied to the account that downloaded it, you can't re-download content via a different account. You checked the spam folder on yourr old account as well as the Inbox, and depending upon how long ago you did it, have you retried getting it reset : http://appleid.apple.com, then 'reset your password' ?
-
can you operate the mac book pro 15 inch with out the battery? I read somewhere in a post that it lowers the power to about 1 gig with out the battery. I asked apple and they said it is not true because you can use the comp with the power adapter and battery together or either by itself and it will not effect the 2.16 gig. Thank you.
If you remove the battery the CPU power will be cut by 50% (whatever they told you) so that there's no lack of power or overheating issues. It's best to always keep the battery in.
-
Solution Manager Upgrade Issue for "Business Process Monitoring"
Hello,
We had upgrade Solution Manager 7.1 SP08 to SP11.
Earlier our BP Monitories were working fine which are not working now, also we are not able to use function “Load Monitor”.We are facing below major issues
1. No system in Logical Component
2. No RFC destination found
3. Unable to load Monitors
Also the BPMon configuration is not working post upgrade
Kindly help us to resolve these issues.
Maybe you are looking for
-
Error encountered during execution of procedure....
Hi, Im new to Oracle..just started with working with Oracle 10g in my company.Im trying to execute a procedure in SQL Developer 1.5.1 but getting this error as shown below.It would be great if anyone could help me out in it. Error starting at line 3
-
LSMW--- I am not seeing some variables, which r using in abap code!
Hi Experts, Am enhancing the LSMW---> Create_Material, so I hv some basic doubts, pls. clarify, 1 - In the following satemenrts of the code, the programmer used my_langu(variable?), so, Where the programmer has declared(attributes & value) the my_lan
-
UK 02 - often unable to connect to site even with full signal
Sometimes my iPhone will refuse to connect to web sites or the email server, even though I have a full signal and gprs with or without edge. It's been doing this frequently since the latest firmware update and it's getting a bit annoying. It doesn't
-
Dear all Guru, I have a question here regarding BO Web Intelligence. Refer to the Screenshot RE002.PNG show total of 1293 devices in my report which is correct.. [IMG]http://i39.tinypic.com/2zxsgtt.png[/IMG] However, When I add more fields into the s
-
Dear SAP Guru's, I am having open order from long period (2004). some order have status as "Being Processed". I want to close this all orders on MASS scale. i tried using tcode MASS, but it changes the status of those orders which are not delivered.