BC CASE:: File not Reaching XI to BW System even message is success in MONI

Hi! Gurus,
This is Amar Srinivas Eli. Here I am facing one important issue. we are transferring data from SAP XI --> BW System via RFC's through FTP Server using Sender File(FTP) to receiver RFC Module.

But issue is we are able to send messages from XI but that particular files not reaching to BW system
Here we checked the below following:: 
1.SXMB_MONI:: Success Message its Showing success status and Black and White FLag is obtained and is reflecting every time success from XI SIde
2. SMQ1 & SMQ2 :: No Messages in both the queues.
3. We checked RFC COnnections ::
every thing is fine and all are active.
4. Communication Channel Monitoring::
Both Sender as well as Receiver CC are showing Status Green and Error Free
5. I checked with BASIS Trace on my User ID:
in that analysis every thing is fine means no red colour error.
NOte:: This Scenario is become Success only once if the XI server is restarted once then the file is reaching BW system in remaining cases one day File is picking successfully and another day file is not even picking.
WHY THIS UNEVEN IN SERVER AND tell me if there is any mistake or else any issue with RFC or Still I need to do any thing from my part as a XI Developer,.
Kindly answer it as it is a BC Case.
THanks
Amar Srinivas Eli

Hi! Vijay,
I already mentioned that I have chcked even in SXMB_MONI as well as SMQ1 and SMQ2.
1. In MONI If you placing a file in FTP server it was picking from FTP Server and is howing success message in MONI (Blacka nd White Flag)
2. I also checked in Both the queues SMq1 and Smq2no messages and no queues are remained in Queues
3. Even I checked CC Channel Monitoring
both sender and receiver Cc's are Green and Error free.So
So,Please provide any other solution for why it was not reaching to BW system even though All RFC Connections are fine and acitive.
Thanks
Amar Srinivas

Similar Messages

FTP to file server - file not reached to file server but in XI success

Hi
Scenario is
XI is picking file from SAP and sending to a file server. In XI ,communication channel and sxi_moni shows message transferred successfully.
But the file server guys din't receive any file. Can any one tell where the message can be lost. If file is not reaching destination then how come in XI its showing SUCCESSFUL message.
Regards

Hi,
Your communication channel is not able to connect with the FTP sever.
Check in RWB the communication channel log also user id, password mentioned in communication channel.
Check whether that user has authorization to create file on FTP sever.

Sequence not Opening: File not found and Out of Memory Error Message

Hello
Attempting to open sequence in FC gives me the error: File not found.
Clicking on okay in the message gives another error: Out of Memory.
Final Cut Pro version is 6.02
Anybody have a solution on how to get this sequence working again?
Thanks

Project itself opens fine.
Can a sequence file with in a project become corrupted?
Luckily, I always make duplicate of the sequence I'm working on at the start of the day. And I save often when I'm working.
The earlier duplicated version of the sequence works, so not everything is lost.
Unfortunately the auto save was disabled in my profile, back on it goes.
I was wondering if this has happened to anyone before and that if there is a fix - if it is not a corrupted file?

File not reached ftp : How to handle the error

Hi,
I am doing idoc-file scenario. I need to place file on ftp server. Now if i give incorrect ftp details, the error canot be seen in SXI_MONITOR but in Adapterframework i can see the error.
Can someone please let me know how this exception can be handled. I need to send mail notification notifying such errors.
Thanks & Regards
Vani

Hi Vani,
XI has 2 basic engines, the Integration Engine and Adapter Engine running inside the J2EE engine.
The reason that you can see the error in Adapter but not in SXMB_MONI is that the processing of your Integration Engine has no errors in it.
But, when the Adapter is trying to post the file into the Destination System, it errors out and so, the error in the Adapter Framework.
Errors in the Adapter Engine can also be used to trigger alerts and send email.
To create Alerts, Alert Rule, just check this blog,
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
It will help you in doing your entire Alert Configuration.
Next,from SP14 onwards, activation of end to end monitoring is not needed for Alerting. Refer to this note 870232 for this info.
Next, to test if your Alerts have been defined correctly, go to SE38. In the program , type RSALERTTEST and then click on EXECUTE button ( F8 ). In the next window, it will ask you for your ALERTCATEGORY. Just give the name of your ALERT CATEGORY and click EXECUTE.
If you have configured your alerts correctly, you will receive a message that tells ALERT IS GENERATED and will give the ALERT ID.
Now, go to your Run TIme workbench and then select ALERT INBOX and see if you have got the ALERT message in your ALERT INBOX.
If this is working fine, then the last step, implement the note 913858.
If you are below SP14, also check this blog,
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
Regards,
Bhavesh

File not generated in receiver end For ECC to file scenario.

HI Experts,
WE are facing issue while processing messages from ECC to file. Here we are able to see messages getting processed in MONI but was not able to see any log in receiver communication Channel or any file getting into receiver end.
Could you please guide me the steps to debug this issue.
thanks & Regards,
Ranganath.

hi ranganath dasari ,
You got success message in SXMB_MONI......file is not placed into target directory.
first you need to check receiver communication channel for file. check the parametrs you are giving in receiver file adapter and your receiver communication channel active or not.
regards,
ganesh.n

Camera RAW, file not recognized after import and migration, Aperture 2.1

Hi,
I have recently purchased a 1DMKIII and am constantly getting "file not recognized" after I import and even after migrating RAW files. My 1DS MK1 RAW files have no issues. The RAW files render just fine using CS4 bridge. Any ideas here on a fix? Other than ditching Aperture (not desireable)
Thanks,
Greg

Hummmm..I have just 'manned-up' from a 2gb macbook running tiger+CS4 to a iMac 24" 8gb running leopard BUT!
I shoot RAW and the iMac will not recognize the NEF RAW files! this is soo frustrating - tried to update Camera Raw but to no avail.
please help! I've got 987 raw wedding photos to process!!
I dont know what to do!

Error Infosource is not defined in the source system

I am extracting data into ODS. It was running perfectly till now. But today i am getting this error.and for all packages i run. whether it is transaction data or master data.
I replicated the DataSource and activated all the objects and transfer structure.but still getting the same error.
I even created a new DataSource and infosource but still the error persists. please help me in this matter.
Thanks

the data is extracted from BW system itself (Self System).
there are three tables linked to each other.I have created an infoset query and creted datasource on that infoset query.
the source system is the same bw system.
The detailed error report is -
InfoSource is not defined in the source system.
Message no. R3005
Diagnosis
The InfoSource specified in the data request, is not defined in the source system.
System response
The data transfer is terminated.
Procedure
In the Administrator Workbench of the Business Information Warehouse, update the metadata for this source system, and delete the InfoPackages belonging to InfoSources that no longer existing .

I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.

I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.
Help!
Thanks, Mark

Unfortunately, the error message gives no details about what codec might be missing or what it needs.
If the file can't be opened in QT, it only means you cannot use the QT "Inspector" window to check what compression formats were used to create the file. It does not mean you can't use the Finder "Information" window to check on the compression formats or use a third party media information window (e.g., like VLC which will open many compression formats not supported natively by QT) to determine what kind of data is included in the MOV wrapper. If the file cannot be opened in any app, it is usually a good sign that the file itself is corrupted.
It's a stupid error message. Apple should do better than that.
Error trapping is quite extensive but there are still many areas which require human oversight. The message is telling you that either the container has a problem (e.g., not properly terminated, non-standard, or corrupted) or that one or more of the compression formats used is not supported by your current codec component configuration or that the data was encoded using non-standard settings or preferences not supported by QT or that the fourCC code does not match the data contained in the file or that there are timecode inconsistencies, etc., etc., etc. In short there are a near infinite number of possible problems for which it would be very difficult/nearly impossible to program error trapping depending on your sourcing of content and how you process it before it reaches the player app. Think of it like trying to play a BD disc in an DVD player.
I'll call Apple support when I get a chance.
Chances are good that they will end up sending you back here. In any case, it is often a good idea to post a sample file for examination by other QT users. At the very least, they should be able to tell you if the sample file will play on other systems which would indicate whether or not the file itself is bad and under the best of circumstances whould allow them to examing the file in detail for various common problems.

"Error occurred while launching. The end of the file was reached" ?

I have OS 9.2.2 and, recently, OS X 10.3.9, installed on my machine. I have not yet transferred my Outlook Express files to MAIL. Yesterday, I was attempting to clean out my Outlook Express DELETE files when I noticed that I had hit the wrong key and was deleting my IN files. I couldn't stop the process,so I turned off my machine. Now, whenever I try to connect with Outlook Express, I get the message "Error occurred while launching. The end of the file was reached". Now, Outlook Express is no longer supported by Microsoft, so it's time to change to Safari, anyway, but I have many files in Outlook Express that I want to save. Can anything be done?

David,
No solutipn yet, but I'm still hopeful. However, I would appreciate your comments on the following:
1. I still could not open Outlook Express, even after rebuilding the desktop--twice--and downloading it again. However, I just noticed that you recommended the use of a OS 9 CD, not a download. I'll look around for the CD if you feel that's the only way to go. Is it?
2. When I downloaded the OS 9 Outlook Express, the window said to copy it to my Hard disk. I assume that means just to drag the Outlook Express icon to the top of the Hard Disk icon. Is that correct?
3. If all else fails, what about those programs that have been around for years that facilitate the retrieval of otherwise lost files. Would such a program be helpful in this case? If so, can you mention a few of them? I want to retain some of those files, even if it means having to spend a hundred dollars or so for the necessary software.
4. Yes, such mishaps can indeed be painful. Fortunately, although I am a bit of a fumble-fingers, the problems I have encountered since I bought my set in 1999 as the result of such clumsiness have been few. It looks like I've been lucky, but that I am paying for it now.
iMac DV (Special Edition) Mac OS 9.1.x

IOCTL from user level program do not reach module

Hello,
I am facing with a weired problem. The user level ioctl on my device file does not reach the ioctl handler in my module at all. I have a simple character device driver called dummy (just pulled from a device driver manual 'hello world' example).
[root@/]modinfo | grep dummy
227 fa2f9a20 634 220 1 dummy (dummy driver)
[root@/]ls -l /devices/pseudo/dummy\@0\:0
c-wxrw--wx 1 root sys 220, 0 Dec 3 15:13 /devices/pseudo/dummy@0:0
The open on the device file works well. But when I call ioctl, the message in the ioctl handler does not print. Niether does the ioctl call appear in the DTrace probes. perror from user program returns :
: Invalid argument
Let me know of any probable cause of ioctls not getting executed.
Thanks in advance
->Shreyas
My driver code is as follows :
 * Minimalist pseudo-device.
 * Writes a message whenever a routine is entered.
 * Build the driver:
 * cc -D_KERNEL -c dummy.c
 * ld -r -o dummy dummy.o
 * Copy the driver and the configuration file to /usr/kernel/drv:
 * cp dummy.conf /usr/kernel/drv
 * cp dummy /tmp
 * ln -s /tmp/dummy /usr/kernel/drv/dummy
 * Add the driver:
 * add_drv dummy
 * Test (1) read from driver (2) write to driver:
 * cat /devices/pseudo/dummy@*
 echo hello > ls /devices/pseudo/dummy@*
 * Verify the tests in another window:
 * tail -f /var/adm/messages
 * Remove the driver:
 * rem_drv dummy
#define SOLARIS
#include <sys/devops.h> /* used by dev_ops */
#include <sys/conf.h> /* used by dev_ops and cb_ops */
#include <sys/modctl.h> /* used by modlinkage, modldrv, _init, _info, */
 /* and _fini */
#include <sys/types.h> /* used by open, close, read, write, prop_op, */
 /* and ddi_prop_op */
#include <sys/file.h> /* used by open, close */
#include <sys/errno.h> /* used by open, close, read, write */
#include <sys/open.h> /* used by open, close, read, write */
#include <sys/cred.h> /* used by open, close, read */
#include <sys/uio.h> /* used by read */
#include <sys/stat.h> /* defines S_IFCHR used by ddi_create_minor_node */
#include <sys/cmn_err.h> /* used by all entry points for this driver */
#include <sys/ddi.h> /* used by all entry points for this driver */
 /* also used by cb_ops, ddi_get_instance, and */
 /* ddi_prop_op */
#include <sys/sunddi.h> /* used by all entry points for this driver */
 /* also used by cb_ops, ddi_create_minor_node, */
 /* ddi_get_instance, and ddi_prop_op */
#include "vmci_defs.h"
#include "vmciDatagram.h"
char _depends_on[]="vmci";
static int dummy_attach(dev_info_t *dip, ddi_attach_cmd_t cmd);
static int dummy_detach(dev_info_t *dip, ddi_detach_cmd_t cmd);
static int dummy_getinfo(dev_info_t *dip, ddi_info_cmd_t cmd, void *arg,
 void **resultp);
static int dummy_prop_op(dev_t dev, dev_info_t *dip, ddi_prop_op_t prop_op,
 int flags, char *name, caddr_t valuep, int *lengthp);
static int dummy_open(dev_t *devp, int flag, int otyp, cred_t *cred);
static int dummy_close(dev_t dev, int flag, int otyp, cred_t *cred);
static int dummy_read(dev_t dev, struct uio *uiop, cred_t *credp);
static int dummy_write(dev_t dev, struct uio *uiop, cred_t *credp);
static int dummy_ioctl(dev_t dev, int cmd, intptr_t arg, int mode,
 cred_t *credp, int *rval);
static int dummy_poll(dev_t dev, short events, int anyyet,
 short *reventsp, struct pollhead **phpp);
/* cb_ops structure */
static struct cb_ops dummy_cb_ops = {
 dummy_open,
 dummy_close,
 nodev, /* no strategy - nodev returns ENXIO */
 nodev, /* no print */
 nodev, /* no dump */
 dummy_read,
 dummy_write,
 dummy_ioctl,
 nodev, /* no devmap */
 nodev, /* no mmap */
 nodev, /* no segmap */
 dummy_poll, /* returns ENXIO for non-pollable devices */
 dummy_prop_op,
 NULL, /* streamtab struct; if not NULL, all above */
 /* fields are ignored */
 D_NEW | D_MP, /* compatibility flags: see conf.h */
 CB_REV, /* cb_ops revision number */
 nodev, /* no aread */
 nodev /* no awrite */
/* dev_ops structure */
static struct dev_ops dummy_dev_ops = {
 DEVO_REV,
 0, /* reference count */
 ddi_no_info,
 //dummy_getinfo,
 nulldev, /* no identify - nulldev returns 0 */
 nulldev, /* no probe */
 dummy_attach,
 dummy_detach,
 nodev, /* no reset - nodev returns ENXIO */
 &dummy_cb_ops,
 (struct bus_ops *)NULL,
 NULL /* no power */
/* modldrv structure */
static struct modldrv md = {
 &mod_driverops, /* Type of module. This is a driver. */
 "dummy driver", /* Name of the module. */
 &dummy_dev_ops
/* modlinkage structure */
static struct modlinkage ml = {
 MODREV_1,
 &md,
 NULL
/* dev_info structure */
dev_info_t *dummy_dip; /* keep track of one instance */
/* Loadable module configuration entry points */
int
_init(void)
 cmn_err(CE_NOTE, "Inside _init");
 return(mod_install(&ml));
int
_info(struct modinfo *modinfop)
 cmn_err(CE_NOTE, "Inside _info");
 return(mod_info(&ml, modinfop));
int
_fini(void)
 cmn_err(CE_NOTE, "Inside _fini");
 return(mod_remove(&ml));
/* Device configuration entry points */
static int
dummy_attach(dev_info_t *dip, ddi_attach_cmd_t cmd)
 cmn_err(CE_NOTE, "Inside dummy_attach");
 switch(cmd) {
 case DDI_ATTACH:
 dummy_dip = dip;
 if (ddi_create_minor_node(dip, "0", S_IFCHR,
 ddi_get_instance(dip), DDI_PSEUDO,0)
 != DDI_SUCCESS) {
 cmn_err(CE_NOTE,
 "%s%d: attach: could not add character node.",
 "dummy", 0);
 return(DDI_FAILURE);
 } else
 return DDI_SUCCESS;
 default:
 return DDI_FAILURE;
static int
dummy_detach(dev_info_t *dip, ddi_detach_cmd_t cmd)
 cmn_err(CE_NOTE, "Inside dummy_detach");
 switch(cmd) {
 case DDI_DETACH:
 dummy_dip = 0;
 ddi_remove_minor_node(dip, NULL);
 return DDI_SUCCESS;
 default:
 return DDI_FAILURE;
static int
dummy_getinfo(dev_info_t *dip, ddi_info_cmd_t cmd, void *arg,
 void **resultp)
 cmn_err(CE_NOTE, "Inside dummy_getinfo");
 switch(cmd) {
 case DDI_INFO_DEVT2DEVINFO:
 *resultp = dummy_dip;
 return DDI_SUCCESS;
 case DDI_INFO_DEVT2INSTANCE:
 *resultp = 0;
 return DDI_SUCCESS;
 default:
 return DDI_FAILURE;
/* Main entry points */
static int
dummy_prop_op(dev_t dev, dev_info_t *dip, ddi_prop_op_t prop_op,
int flags, char *name, caddr_t valuep, int *lengthp)
cmn_err(CE_NOTE, "Inside dummy_prop_op");
// return DDI_SUCCESS;
return(ddi_prop_op(dev,dip,prop_op,flags,name,valuep,lengthp));
static int
dummy_open(dev_t *devp, int flag, int otyp, cred_t *cred)
 int status;
 cmn_err(CE_NOTE, "Inside dummy_open");
 return DDI_SUCCESS;
static int
dummy_close(dev_t dev, int flag, int otyp, cred_t *cred)
 cmn_err(CE_NOTE, "Inside dummy_close");
 return DDI_SUCCESS;
static int
dummy_read(dev_t dev, struct uio *uiop, cred_t *credp)
 cmn_err(CE_NOTE, "Inside dummy_read");
 return DDI_SUCCESS;
static int
dummy_write(dev_t dev, struct uio *uiop, cred_t *credp)
 cmn_err(CE_NOTE, "Inside dummy_write");
 return DDI_SUCCESS;
static int
dummy_ioctl(dev_t dev, int cmd, intptr_t arg, int mode,
 cred_t *credp, int *rval)
 cmn_err(CE_WARN, "%s(%d) Received function : %d\n", __FUNCTION__, __LINE__, cmd);
 return(0);
static int
dummy_poll(dev_t dev, // IN: Device number.
 short events, // IN: Requested events.
 int anyyet, // IN: Whether other fds have had events.
 short *reventsp, // OUT: Mask of satisfied events.
 struct pollhead **phpp) { // OUT: Set to a pollhead if necessary.
 cmn_err(CE_WARN, "%s(%d) \n", __FUNCTION__, __LINE__);
 return 0;
}

Read very carefully the file /usr/include/sys/ioccom.h.
-r

Sap-nw:3300 not reached error in gateway

Dear experts,
I am facing a strange problem after a successful installation of netweaver Java+abap.
when i start the server i found this error
**** ERROR file opened at 20100131 114242 Arab Standard T, SAP-REL 700,0,113 RFC-VER 3 911150 MT-SL
T:2844 Error in program 'igsmux': ======> CPIC-CALL: 'SAP_CMNOREGTP'
LOCATION CPIC (TCP/IP) on local host
ERROR partner 'sap-nw:3300' not reached
TIME Sun Jan 31 11:42:42 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2770
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 1
i ignore the error and i tried to login
after successful login to the portal server when i access the user administration tab. the explorer show
SAP WebAS Engine is starting...
If this state does not change within a few minutes,
please contact your system administrator.
Check the recommendations in SAP Notes: 943498, 764417
Message: Dispatcher running but no server connected!
and the server turns to yellow again when it turns to green again
i checked dev_rd
Sun Jan 31 13:11:15 2010
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 9 / sock 268
 (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1205) [nixxi.cpp 4424]
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 6 / sock 304
 (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1148) [nixxi.cpp 4424]
***LOG S23=> GwIDisconnectClient, client disconnected (006) [gwxxrd.c 11592]
***LOG S74=> GwIDisconnectClient, client disconnected ( sap-nw) [gwxxrd.c 11603]
***LOG S0R=> GwIDisconnectClient, client disconnected () [gwxxrd.c 11638]
***LOG S0I=> GwIDisconnectClient, client disconnected ( jlaunch) [gwxxrd.c 11651]
* LOCATION SAP-Gateway on host sap-nw / sapgw00
* ERROR connection to partner 'sap-nw:1148' broken
* TIME Sun Jan 31 13:11:15 2010
* RELEASE 700
* COMPONENT NI (network interface)
* VERSION 38
* RC -6
* MODULE nixxi.cpp
* LINE 4424
* DETAIL NiIRead
* SYSTEM CALL recv
* ERRNO 10054
* ERRNO TEXT WSAECONNRESET: Connection reset by peer
* COUNTER 232
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 10 / sock 256
 (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1206) [nixxi.cpp 4424]
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 11 / sock 244
 (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1208) [nixxi.cpp 4424]
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 12 / sock 232
 (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1207) [nixxi.cpp 4424]
then i try to login again with the browser it give me
Portal Runtime Error
An exception occurred while processing your request
Exception id: 01:27_31/01/10_6192950
See the details for the exception ID in the log file.
any help would be appreciated
 
i also wanted to add that telnet 3300 works fine ping to host name is ok
my os win2003 sap 2004s sr3
Edited by: ebrahime on Jan 31, 2010 11:37 AM

thanks for your reply. i wanted to add 2 thing after the installation the password i entered in installation was not working for all the super users that is why i had to delete SAP* from database and change the j2ee_Admin password.
you mentioned that the java stack is unable to communicate with abap stack but i can login to portal by j2ee_admin user. but when i go to identity management then it give the error i gave you earlier.
any way the dev_w0 file contents is bellow
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Tue Feb 02 10:23:01 2010
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\ENP\DVEBMGS00\exe\dbdb6slib.dll' ...
B Library 'F:\usr\sap\ENP\DVEBMGS00\exe\dbdb6slib.dll' loaded
B Version of 'F:\usr\sap\ENP\DVEBMGS00\exe\dbdb6slib.dll' is "700.08", patchlevel (0.144)
C DbSl trace SM50: switch request to level 1
B New connection 0 created
M sysno 00
M sid ENP
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 144
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 1604
M
M kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1604) [dpxxdisp.c 1305]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 25168 (1480)
M DpShMCreate: sizeof(tm_adm) 5652128 (28120)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000010E70050, size: 6348592)
M DpShMCreate: allocated sys_adm at 0000000010E70050
M DpShMCreate: allocated wp_adm at 0000000010E72150
M DpShMCreate: allocated tm_adm_list at 0000000010E783A0
M DpShMCreate: allocated tm_adm at 0000000010E78400
M DpShMCreate: allocated wp_ca_adm at 00000000113DC2A0
M DpShMCreate: allocated appc_ca_adm at 00000000113E2060
M DpShMCreate: allocated comm_adm at 00000000113E3FA0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000001146AC30
M DpShMCreate: allocated gw_adm at 000000001146ACB0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000001146ACE0
M DpShMCreate: allocated wall_adm at 000000001146ACF0
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Tue Feb 02 10:23:02 2010
M ThInit: running on host ENP
M
M Tue Feb 02 10:23:03 2010
M calling db_connect ...
C Registering callback for dynamic profile parameters
C DB2 library successfully loaded DB2 library 'F:\usr\sap\ENP\DVEBMGS00\exe/db6_clidriver\bin\db2app64.dll' successfully loaded
C
C DB6 (DB2 UDB) UNICODE database interface 700.08 [opt]
C
C DB6 shared library (dbdb6slib) patchlevels
C (0.8) DB6: V8.2.2 optguidelines in OPEN SQL (note 150037)
C (0.8) Support of SDBUPDEXCL (note 847616)
C (0.9) DB6: use export file for dbdb6slib (note 835135)
C (0.9) DB6: Core in getAndBindSQLDA (note 833183)
C (0.10) DB6: link dbdb6slib.dll on windows with libdb6.obj (note 761159)
C (0.10) DB6: DUPLICATE_KEY on MERGE -> repeat (note 851474)
C (0.15) DB6: wrong CAST for short string ABAP type (note 861905)
C (0.17) DB6: special characters in sidadm passwd (note 865839)
C (0.21) DB6: no SAP_INFO comments (note 873889)
C (0.22) DB6: hints: get correlation names from view texts (note 868888)
C (0.23) DB6: hints: get correlation names from view texts (note 868888)
C (0.26) DB6: DB6_DBSL_CLP_COMMAND STRING_BAD_REF (note 883402)
C (0.27) DB6: activate value compression (note 886231)
C (0.28) DB6: optimization guidelines on views part 2 (note 868888)
C (0.30) DB6: no SQL trace for SQLCancel (note 892111)
C (0.33) DB6: append SAP_TA comment (note 873889)
C (0.34) DB6: activate value compression with quoted names (note 886231)
C (0.36) DB6: Repeat isolated DDL statements after SQL0911 (note 901338)
C (0.41) DB6: add V9 to list of supported DB2 releases (note 912386)
C (0.50) DB6: reread passwords for secondary connections (note 931742)
C (0.52) DB6: double quote table names in optguidelines (note 868888)
C (0.54) DB6: error handling in DBSL CLP (note 940260)
C (0.69) DB6: technical support of DB2 CLI driver (note 962892)
C (0.73) DB6: log table name on TRUNCATE failure (note 970743)
C (0.79) DB6: column type XML in index size calculation (note 982993)
C (0.82) DB6: CAST for SSTRING data types (note 989568)
C (0.86) DB6: long runtimes for R3szchk (note 1000847)
C (0.88) DB6: patch collection Dec 06 (note 1005574)
C (0.96) DB6: patch collection Jan 07 (note 1017852)
C (0.97) DB6: CLP commands with DB2 CLI Driver (note 1024102)
C (0.99) DB6: SUBSTITUTE VALUES with FAE statements (note 1028779)
C (0.107) DB6: patch collection Apr 07 (note 1047194)
C (0.110) DB6: SAP user names ending with non-ASCII char (note 1054555)
C (0.113) DB6: work process type in application snapshot (note 1059905)
C (0.114) DB6: connect using SAPDBHOST and DB2DB6_SVCENAME (note 1062049)
C (0.117) DB6: patch for execution of long DDL statements (note 1069658)
C (0.122) DB6: SNAPSHOT_TBS_CFG table function is deprecated (note 1077963)
C (0.123) DB6: CLP commands on Windows with V9.1 (note 1080149)
C (0.124) DB6: Set DB2CODEPAGE=819 for non-Unicode (note 1084400)
C (0.126) DB6: reuse optguidelines on FAE statements (note 1087375)
C (0.126) DB6: Enforce DB2CODEPAGE=819 for non-Unicode environments (note 1084400)
C (0.128) DB6: db6_free on invalid memory area (note 1092030)
C (0.133) DB6: statement cache enhancements (note 1101031)
C (0.136) DB6: change for enhancement pack installer (note 1111536)
C (0.138) DB6: improoved table size estimate for DB8 V8 (note 1119934)
C (0.144) I5/OS ldappasswd support for 5250 terminal. (note 1129573)
C (0.144) MSSQL: ODBC fastload on separate connection (note 1131805)
C
C Supported features:
C
C ..retrieving configuration parameters
C ..done
C Running with UTF-8 Unicode
C
C Tue Feb 02 10:23:04 2010
C Running with CLI driver
C DB2 client driver version '09.01.0007'
C Connected to DB2 server type 'DB2/NT64'
C Connected to DB2 version '09.01.0007'
C Connect to 'ENP' as 'SAPENP' schema 'SAPENP' o.k.; con_hdl=0
C Database code page is ok.
C Database collating sequence is ok.
C DB2_WORKLOAD=SAP is set in DB2 registry as required.
C CLI Insert Buffering is disabled on single partition databases.
C DbSl trace SM50: switch request to level 1
C DbSlControl: returning SAPDBHOST='ENP'
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20100202 102303 ENP
C DbSlControl: returning SAPDBHOST='ENP'
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Tue Feb 02 10:23:05 2010
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0000000015400050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FFDDA80050, size: 268435456)
M SHM_PAGING_AREA (addr: 0000000015840050, size: 134217728)
M SHM_ROLL_ADM (addr: 000000001D850050, size: 2678942)
M SHM_PAGING_ADM (addr: 000000001DAE0050, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 000000001DB70050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 000000000AE50050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 17, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0000000021540160, size: 30000000, end: 00000000231DC4E0)
B dbtbxbuf: Buffer TABLP (addr: 00000000231E0160, size: 10240000, end: 0000000023BA4160)
B dbexpbuf: Buffer EIBUF (addr: 0000000023BC0170, size: 4194304, end: 0000000023FC0170)
B dbexpbuf: Buffer ESM (addr: 0000000023FD0170, size: 4194304, end: 00000000243D0170)
B dbexpbuf: Buffer CUA (addr: 00000000243E0170, size: 3072000, end: 00000000246CE170)
B dbexpbuf: Buffer OTR (addr: 00000000246D0170, size: 4194304, end: 0000000024AD0170)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 00000000128BEA10
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 000000002DDF00D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 000000002DDF0610
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2272 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 11460kb, dir_size: 11392kb.
A Attached to PXA (address 000007FFEDAB0050, size 300000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=000007FF35ED5000 leng=20955136 end=000007FF372D1000)
A >> Shm MMADM area (addr=000007FF363AEF10 leng=244096 end=000007FF363EA890)
A >> Shm MMDAT area (addr=000007FF363EB000 leng=15622144 end=000007FF372D1000)
A RFC Destination> destination ENP_ENP_00 host ENP system ENP systnr 0 (ENP_ENP_00)
A RFC Options> H=ENP,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 35354 bytes at 000000002DF60050
N SsfSapSecin: putenv(SECUDIR=F:\usr\sap\ENP\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is F:\usr\sap\ENP\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...completed with return code 5.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B dbtran INFO (init_connection '<DEFAULT>' [DB6:700.08]):
B max_blocking_factor = 30, max_in_blocking_factor = 60,
B min_blocking_factor = 1, min_in_blocking_factor = 1,
B prefer_union_all = 1, prefer_join = 1,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x3, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.144.20050900]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [16]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N VSI: WP init in ABAP VM completed with rc=0
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume ENP_ENP_00
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Tue Feb 02 10:23:06 2010
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 000000000A960050
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 000000000A9607C0
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 000000000A960800
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 000000000A96080C
M
M Tue Feb 02 10:23:28 2010
M rdisp/rb_cleaned_rfc = 0
A
A Tue Feb 02 10:23:34 2010
A RFC FRFC> fallback on the central gateway ENP sapgw00 activ

HT4061 My iphone says it needs to be activated but it will not activate- says connect to itunes but then I get activation server not available. itunes gave me an error message on my computer that it was missing some file so I uninstalled but now it wont r

cannot reinstall itunes either now please help

Hello there, bkorhummel.
The following Knowledge Base article addresses the very issue you're describing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
If the issue with the iPhone persists after the reinstall of iTunes, the following article may prove useful:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I am trying to install adobe livecycle designer es4 trial version on my computer and i keep getting the message Error 13.11 Source file not found: c:\ verify that the file exist. I have tried to install on both windows 7 and windows 8 and i still get the

error 13.11 Source file not found verify that the file exsist

Try a more recent version of my advice. The "for older video cards version" may work when the default version doesn't.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

File not found, Missing resource bundle

Hi
I have a problem in accessing files (XML and Resource bundles) in Java projects. I used to access these files in WD Java. The same piece of code does not work here.
e.g. When I create a new file object by providing the path name I get a file not found exception. The file exists in my package and I call it this way:
File f = new File("file.txt"); then in an input stream but it doesnt work. However in a J2EE project the same code works.
Similarly the resouce bundle never seems to work even if I give the fully classified class name for the property file. I can access property files in WD Java with ease. I understand that the root path changes and hence the problem. How should I solve it? Is there an elegant way which makes it work in all cases? Please throw some light on the root path for these projects. Thank you.
regards
LNV
Edited by: vln on Jan 16, 2008 9:34 AM

You should be using
this.getClass().getResourceAsStream(filePath)
which will return you an InputStream.
Check the JDK documentation for the respective methods in java.lang.Class and java.lang.ClassLoader.
HTH!
\-- Vladimir

XML File not Found for the Container BC4J.cpx

Hi,
Have following error when I start a BC4J-JSP/Struts application (with Embedded and standalone OC4J) :
500 Internal Server Error
oracle.jbo.NoXMLFileException: JBO-26001: XML File not found for the Container BC4J.cpx
 oracle.jbo.mom.ContainerDefImpl oracle.jbo.mom.DefinitionManager.loadProjectDefinition(java.lang.String)
 DefinitionManager.java:751
 oracle.jbo.mom.ContainerDefImpl oracle.jbo.mom.DefinitionManager.loadProjectDefinition()
 DefinitionManager.java:793
 void oracle.jbo.mom.DefinitionManager.initManager()
 DefinitionManager.java:137
 void oracle.jbo.uicli.mom.JUMetaObjectManager.<init>()
 JUMetaObjectManager.java:57
 oracle.jbo.uicli.mom.JUMetaObjectManager oracle.jbo.uicli.mom.JUMetaObjectManager.getJUMom()
 JUMetaObjectManager.java:131
 oracle.jbo.common.ampool.SessionCookie oracle.jbo.http.HttpContainer.findSessionCookie(javax.servlet.http.HttpSession, java.lang.String, java.lang.String, java.util.Properties)
 HttpContainer.java:541
 boolean oracle.jbo.html.struts11.BC4JRequestProcessor.initPageFromPath(oracle.jbo.html.struts11.BC4JActionMapping, javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
 BC4JRequestProcessor.java:222
 org.apache.struts.action.ActionMapping oracle.jbo.html.struts11.BC4JRequestProcessor.processMapping(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse, java.lang.String)
 BC4JRequestProcessor.java:124
 void org.apache.struts.action.RequestProcessor.process(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
 RequestProcessor.java:234
 void org.apache.struts.action.ActionServlet.process(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
 ActionServlet.java:1292
 void org.apache.struts.action.ActionServlet.doGet(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
 ActionServlet.java:492
 void javax.servlet.http.HttpServlet.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
 HttpServlet.java:740
 void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
 HttpServlet.java:853
 void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
 ServletRequestDispatcher.java:721
 void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(javax.servlet.ServletRequest, javax.servlet.http.HttpServletResponse)
 ServletRequestDispatcher.java:306
 boolean com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.ApplicationServerThread, com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.EvermindHttpServletRequest, com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.EvermindHttpServletResponse, java.io.InputStream, java.io.OutputStream, boolean)
 HttpRequestHandler.java:767
 void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(java.lang.Thread)
 HttpRequestHandler.java:259
 void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run()
 HttpRequestHandler.java:106
 void EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run()
 PooledExecutor.java:803
 void java.lang.Thread.run()
 Thread.java:484
Then I make a Reload and it's ok.
I have a Workspace with two Projects :
BC4J.jpr for Businnes Components
Web.jpr for JSP Struts
In /classes I have the file Web.cpx, but no BC4J.cpx.
From which does this name come ? Can I change this name ?
Thanks
Yves

I found this on Metalink...
JBO-26001: NoXMLFileException
Cause: Could not open the named XML file for read.
The following is from Note 137429.1. Hope this helps.
Raja.
JBO-26001: NoXMLFileException
Cause: Could not open the named XML file for read.
Action: 1. Make sure that the file is present. In particular, if the file is to be found in a zip/jar file, make sure that the Zip/JAR file is included in the CLASSPATH.
2. This error is also reported if the name of the XML file does not match the object Name specified in the XML file. If the file system support case insensitive file names (e.g., Windows NT), make sure that the file name matches the object Name in the XML file in case-sensitive fashion.
3. For a .JPX file, this error is reported if the JPX file is missing the JboProject XML tag. Check the JPX file to make sure that the valid tag is in there.
4. One XML file may be extending another XML file (specified by the Extends element in this XML file). This error is reported if the base XML file is not found.
5. When loading the XML file for a package (JboPackage tag), this error is reported if some unexpected error occurs while loading a containee.
In all of the above cases, a more descriptive message may be printed on Diagnostic. If you are not seeing Diagnostic messages, you can run your application with Diagnostic turned on, as in "java -Djbo.debugoutput=console ...", to see Diagnostic messages.

BC CASE:: File not Reaching XI to BW System even message is success in MONI

Similar Messages

Maybe you are looking for