BCS configuration transport errors
Hi Experts,
I have a problem when I tried to transport BCS configuration from BWD into BWT. Previously, those configuration were transported succesfully into BWT; however, somehow this time failed.
The error message that I got in STMS:
Communication error: Destination BWT -> long text
Message no. FINB_TR047
Diagnosis
A communication error has arisen during execution of the remote function call.
Destination: BWT
Message: Name or password is incorrect. Please re-enter
System response
The import could not be completed correctly.
Procedure
Check whether program terminations have occurred in the target system (target client).
I have searched few OSS Notes which is related but it doesn't help.
Do you have some ideas how to fix this problem?
Thank you very much and points will be given for helpful answers.
Regards,
Mona
Hi Mona,
Looks like your RFC-connection is bad. You need to check it out, and repair. Probably somebody changed ALEREMOTE or BWREMOTE passwords.
See here the proper RFC's format:
SPRO: SEM/Business Analytics -> Fin. Basis -> Transport and client copies -> Transports -> Assign RFC destinations for transport methods. Click on the book icon and see the directions.
Similar Messages
-
Integrated Configuration transport error
Hi,
I just transported an Integrated Configuration from DVE system to the QA and the IC in the QAS is not configured correclty.
PI 7.1
My IC have multiple operations and 2 receivers.
The Receivers System were translated correctly (SYSDVE > SYSQA) however the operations and the operation mapping were not correct when activated in QA.
In DVE Operation1 pointed to Receiver1, but in QAS my Operation1 is associated with Receiver2.
Anyone had a similar issue?
Regards,
MartinThanks for the answer Mickael.
The receivers are Business System. Everything seems well configured in the SLD. We did many transport without any problems, but it's the first time we transport Integrated Configuration.
I noticed that in my Integrated Configuration, the configuration is fine under the 'Receiver' tab for all of the operations, it's only under the 'Receiver Interfaces' that the Receiver Systems is not properly configured for the operations... -
Error: ORA-16778: redo transport error for one or more databases
Hi all
I have 2 database servers"Primary database and physical standby" in test environment( before going to Production)
Before Dataguard broker configuration , DG setup was running fine , redo was being applied and archived on phy standby.
but while enabling configuration i got "Warning: ORA-16607: one or more databases have failed" listener.ora & tnsnames.ora are updated with global_name_DGMGRL
Please help me how can i resolve this issue .Thanks in advance.
[oracle@PRIM ~]$ dgmgrl
DGMGRL for Linux: Version 10.2.0.1.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect sys
Password:
Connected.
DGMGRL> show configuration
Configuration
Name: test
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show database
show database
^
Syntax error before or at "end-of-line"
DGMGRL> remove configuration
Warning: ORA-16620: one or more databases could not be contacted for a delete operation
Removed configuration
DGMGRL> exit
[oracle@PRIM ~]$ connect sys/sys@prim as sysdba
bash: connect: command not found
[oracle@PRIM ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:30
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
[oracle@PRIM ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:48
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 08-OCT-2006 19:52:48
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PRIM_DGMGRLL" has 1 instance(s).
Instance "PRIM", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@PRIM ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:46
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
[oracle@PRIM ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:59
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
[oracle@PRIM ~]$ dgmgrl
DGMGRL for Linux: Version 10.2.0.1.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect /
Connected.
DGMGRL> create configuration test as
primary database is PRIM
connect identifier is PRIM
;Configuration "test" created with primary database "prim"
DGMGRL> add database STAN as
connect identifier is STAN
maintained as physical;Database "stan" added
DGMGRL> show configuration
Configuration
Name: test
Enabled: NO
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
DISABLED
DGMGRL> enable configuration
Enabled.
DGMGRL> show configuration
Configuration
Name: test
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show database verbose prim
Database
Name: prim
Role: PRIMARY
Enabled: YES
Intended State: ONLINE
Instance(s):
PRIM
Properties:
InitialConnectIdentifier = 'prim'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
LogFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'PRIM'
SidName = 'PRIM'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521))'
StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/PRIM/archivelog/'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "prim":
Error: ORA-16778: redo transport error for one or more databases
DGMGRL> show database verbose stan
Database
Name: stan
Role: PHYSICAL STANDBY
Enabled: YES
Intended State: ONLINE
Instance(s):
STAN
Properties:
InitialConnectIdentifier = 'stan'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
LogFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'STAND'
SidName = 'STAN'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=STAND)(PORT=1521))'
StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/STAN/archivelog/'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "stan":
Error: ORA-12545: Connect failed because target host or object does not exist
DGMGRL>This:
Current status for "stan":
Error: ORA-12545: Connect failed because target host or object does not exist
says that your network setup is not correct. You need to resolve that first.
As for Broker setup steps how about the doc or our Data Guard 11g Handbook?
It's 3 DGMGRL commands so I am not sure what 'steps' you need?
Larry -
HTTP Transport Error in Net BEans 6.5
Hello,
I am consuming a web service using JAX-RPC. I am trying to log onto a web interface through my program but I am getting the following error:
Feb 6, 2009 1:10:54 PM ttsample.Engine Login
SEVERE: null
java.rmi.RemoteException: HTTP transport error: java.net.UnknownHostException: http; nested exception is:
Logged in...
HTTP transport error: java.net.UnknownHostException: http
at ttsample.TtsoapcgiPortType_Stub.databaseLogon(TtsoapcgiPortType_Stub.java:819)
at ttsample.Engine.Login(Engine.java:77)
at ttsample.Main.main(Main.java:30)
Caused by: HTTP transport error: java.net.UnknownHostException: http
at com.sun.xml.rpc.client.http.HttpClientTransport.invoke(HttpClientTransport.java:140)
at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:96)
at ttsample.TtsoapcgiPortType_Stub.databaseLogon(TtsoapcgiPortType_Stub.java:802)
... 2 more
I searched the web and found that this is a proxy setting proble.
I configured apache earlier to use the local host that run the web client.
When I change the http port host and port number and try to login into the web client its giving me page not found error.So I changed the proxy settings to default and then restarted the system and then tried to log into the web client and it worked.
I dont know where i am going wrong.I want to consume the WSDL and log into the web client but i am gettingthe above error.
Anyone's help will be greatly appreciated.
Thank You,
Sravanthi.Where did you get the address: http://sal006.salnetwork.com:82/bin/lccountrycodes.cgi (shouldn't the 82 be 83 instead?)
-
How to configure a error queue for weblogic jms topic
Hi guys.
I want to configure a error queue for weblogic jms topic. Wanted: The message goes to error destination when messages have expired or reached their redelivery limit.
1. using jms transport configure proxy service:
Retry Count :3
Retry Interval:10
Error Destination: ErrorTopic
Expiration Policy: Redirect
I tried use the proxy service to consume message from the jms topic . and generation an error in the proxy message flow. But the message didn't goes into the error topic.
Any suggestions for this topic? Can anyone provide some helps or any useful links.
Thanks in advance.
MingzhuangMingzhuang
I want to configure a error queue for weblogic jms topic. Wanted: The message goes to error destination when messages have expired or reached their redelivery limit.
1. using jms transport configure proxy service:
Retry Count :3
Retry Interval:10
Error Destination: ErrorTopic
Expiration olicy: RedirectUnlike File/SFTP, JMS proxy service definition does not have the concept of Error Destination. To accomplish similar functionality go to JMSQ on (for which proxy is configured) server console (http://localhost:7001/console) and configure the Error Destination. Following URL will help in how to configure JMS Q.
http://edocs.bea.com/wls/docs103/ConsoleHelp/taskhelp/jms_modules/queues/ConfigureQueues.html
http://edocs.bea.com/wls/docs103/ConsoleHelp/taskhelp/jms_modules/queues/ConfigureQueueDeliveryFailure.html
I tried use the proxy service to consume message from the jms topic . and generation an error in the proxy message flow. But the message didn't goes into the error topic.If every thing is configured as per above step, then the after retries, the weblogic server will put the message into JMS topic configured. Your proxy will receive from this topic.
Let me know if we are not on same page.
Cheers
Manoj -
Error AIP-50079 : Transport error: [IPT_HttpSendHostNotFound]
I was trying Tutorial 3 ( EDI X12 over AS2) from User's Guide. As per instruction, I have configured two B2B Servers. Both the servers are up and running. When I am enqueuing 850 message from Acme server, It's not going to the other server. The error message I see under Reports->Error is:
AIP-50079 : Transport error: [IPT_HttpSendHostNotFound] Host oracle01.dev.rapidigm.com: oracle01.dev.rapidigm.com cannot be found. oracle01.dev.rapidigm.com: oracle01.dev.rapidigm.com.
Not sure why Host name is showing twice (oracle01.dev.rapidigm.com: oracle01.dev.rapidigm.com) in the error message? It should be <Host Name> : <Port>, right?
Similar thing happened when I enqueued 855 from GlobalChips Server.
Appreciate your quick response.
Thanks
SaumitraThanks Ramesh!
Actually I had to give IP address instead of Host name. Now My message is going from one server to another. However I am getting 'An unexpected error occurred during validation' error on the receiving side. Here is the b2b.lig in Debug more.
Appreciate your help.
2007.03.06 at 16:00:06:462: Thread-12: B2B - (ERROR) java.lang.NullPointerException
at oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin.processIncomingDocument(EDIDocumentPlugin.java:970)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1464)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:1851)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:1783)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:1741)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:454)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:326)
at java.lang.Thread.run(Thread.java:534)
2007.03.06 at 16:00:07:058: Thread-12: B2B - (ERROR) Error -: AIP-51505: General Validation Error: java.lang.NullPointerException
at oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin.processIncomingDocument(EDIDocumentPlugin.java:1288)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1464)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:1851)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:1783)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:1741)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:454)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:326)
at java.lang.Thread.run(Thread.java:534)
Caused by: java.lang.NullPointerException
at oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin.processIncomingDocument(EDIDocumentPlugin.java:970)
... 7 more
---------------------------------------------- -
B2B-50079 Transport Error : Bad Message
Hi All,
I have an SFTP outbound TPA which is used to transfer a PGP file from our internal system to TP vendor.
So the transfer is as follows B2B(Internal System) -> WebServer(acts as proxy while connecting to third party server)-->ThirdParty.
The use proxy is checked in the Channels of the Trading Partner.
The transfer fails while transfering the file to the TP with the below error.
"B2B-50079 Transport Error : Bad Message" I have manually sftpd from web server to the TP server and it is working absolutely fine.
Also i have verified that the certificate and host,port username details to connect to the TP are correct.
Please let us know on what the problem area could be.
There is no problem with file naming convention since the file is getting picked up by the listening channel and also we have checked the preserve file name option in the TP channel.
Any help on this is much appreciated.
Thanks,
Naveen Kumar T.Thanks Anuj for the response.
We already have the required patch, also its working fine with other Trading partners which uses SFTP. We are facing this issue with only one Trading partner and the same is working fine with 10g B2B but not with 11g.
Please let us know if there is any other configurations which we can check.
Thanks,
Sirisha -
Crystal Reports logon issue across firewall - Transport error:communication
Hi,
We are facing an error when we try to logon to the BO server using the crystal reports tool (Crystal Reports Enterprise XI Release 2 ) outside the firewall. The login is working fine when inside the firewall. The BO server is on a unix box within the customer network and we are trying to login from a PC (using Crystal Reports Enterprise XI Release 2) which is outside that network. The following are the errors we get when trying to logon using authentication as "Enterprise" and system name as "fully qualified server name:6400"
1. Without including any IP addresses in the PC host file we get "Transport error:communication failure" on login.
2. When I included the IP and name of the BO server in the PC host file (xx.xx.xx.xx host name) we get an error - "CMS host 'xxxx' address was resolved properly,but cannot be reached to establish a CMS connection.Verify your router/firewall allows communication on port 6400."
(The IP address I include in the PC host file is the actual IP address of the BO server)
3. I know we have natted IP addresses.. and the IP address of the BO server appears to be different when I do a ping to the BO server from outside the customer network i.e from the external PC. When I include the IP address in the host file (which I get from the ping <servername> outside the customer network from my PC) I get "Transport error:communication failure".
The port 6400 has been opened in the firewall. We are able to login to the CMC link and the Info view without any issues.
It will be great to get some advise on this as it has become a high priority issue in our workspace now.
Thanks,
ReetiHi All,
I had a breakthrough in logging to BOX1R2 Crystal Reports client outside the firewall. The following was done in our case:
1. Open the port 6400 on the server to allow traffic from outside the firewall.
2. Add the following command at the end in the cmsLAUNCH command line in ccm.config (ours is a BO server on Sun OS)
-port FQDN:6400 -requestport XXXX
The -port parameter was explicitly specified to make CMS explicitly listen on port 6400.
The -requestport parameter was added to configure the server to register a fixed port (which has external access) with the CMS rather than letting it choose a dynamically selected one...so XXXX can be any port which is not allocated to any app and is also open in the firewall)
Thanks,
Reeti -
Transport error: [IPT_HttpSendError] HTTP encounters send error :415
Hi,
I am working on webservice invocation from B2B. I am able to invoke the webservice using SOAP request.
I configured custom document over ebMS protocol and HTTP transport in B2B. When I invoke webservice from B2B i am getting the HTTPSendError.
B2B log:
2009.08.28 at 07:32:45:238: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Invoking PackMessage
2009.08.28 at 07:32:45:239: Thread-10: B2B - (DEBUG) MimePackaging:pack:Enter
2009.08.28 at 07:32:45:244: Thread-10: B2B - (DEBUG) MimePackaging:createMimeMessage:Enter
2009.08.28 at 07:32:45:254: Thread-10: B2B - (DEBUG) MimePackaging:createMimeMessage:number of pc components: 1
2009.08.28 at 07:32:45:255: Thread-10: B2B - (DEBUG) MimePackaging:createMimeBodyPart:Enter
2009.08.28 at 07:32:45:381: Thread-10: B2B - (DEBUG) MimePackaging:applySecurity:Enter
2009.08.28 at 07:32:45:382: Thread-10: B2B - (DEBUG) MimePackaging:applySecurity:Exit
2009.08.28 at 07:32:45:382: Thread-10: B2B - (DEBUG) MimePackaging:createMimeBodyPart:Exit
2009.08.28 at 07:32:45:413: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: setDigestAlgorithm using algorithm name Entering...
2009.08.28 at 07:32:45:413: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: setDigestAlgorithm using algorithm name Leaving...
2009.08.28 at 07:32:45:667: Thread-10: B2B - (DEBUG) MimePackaging:applySecurity:Enter
2009.08.28 at 07:32:45:668: Thread-10: B2B - (DEBUG) MimePackaging:applySecurity:Exit
2009.08.28 at 07:32:45:668: Thread-10: B2B - (DEBUG) MimePackaging:createMimeMessage:Exit
2009.08.28 at 07:32:45:674: Thread-10: B2B - (DEBUG) MimePackaging:getMimeContent:Enter
2009.08.28 at 07:32:45:674: Thread-10: B2B - (DEBUG) MimePackaging:getMimeContent:Exit
2009.08.28 at 07:32:45:675: Thread-10: B2B - (DEBUG) MimePackaging:pack:Exit
2009.08.28 at 07:32:45:680: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Invoking Pre-Transmit
2009.08.28 at 07:32:45:681: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit Enter
2009.08.28 at 07:32:45:681: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit Log & Update Database Tables
2009.08.28 at 07:32:45:681: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit Update the Message Table Row with message state Wait for Incoming Acknowledgment
2009.08.28 at 07:32:45:682: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit Create a Native Event Table row for outgoing Request Message
2009.08.28 at 07:32:45:682: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(3 params) Enter
2009.08.28 at 07:32:45:684: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:insertNativeEvtTblRow msgInfo.id = 83667220
2009.08.28 at 07:32:45:685: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:protocl id set A
2009.08.28 at 07:32:45:685: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:
** DbAccess:insertNativeEvtTblRow protocolCollabId = null
2009.08.28 at 07:32:45:814: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(3 params) Exit
2009.08.28 at 07:32:45:827: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit Create Event Table row for Message Retries
2009.08.28 at 07:32:45:828: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit timeToAck = Thu Jan 01 00:00:00 GMT 1970
2009.08.28 at 07:32:45:828: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit business transaction info name null revision null
2009.08.28 at 07:32:45:828: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit Exit
2009.08.28 at 07:32:45:829: Thread-10: B2B - (DEBUG) DBContext commit: Enter
2009.08.28 at 07:32:45:851: Thread-10: B2B - (DEBUG) DBContext commit: Transaction.commit()
2009.08.28 at 07:32:45:851: Thread-10: B2B - (DEBUG) DBContext commit: Leave
2009.08.28 at 07:32:45:851: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Calling Send to transmit the message
2009.08.28 at 07:32:45:852: Thread-10: B2B - (DEBUG) Protocol Name: HTTP
2009.08.28 at 07:32:45:852: Thread-10: B2B - (DEBUG) Version Name: 1.0
2009.08.28 at 07:32:45:853: Thread-10: B2B - (DEBUG) Endpoint: http://localhost:8003/RemoteTPPDI-TestWS-context-root/TestWSSoapHttpPort
2009.08.28 at 07:32:45:855: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:send URL: HTTP://localhost:8003/RemoteTPPDI-TESTWS-CONTEXT-ROOT/TESTWSSOAPHTTPPORT
2009.08.28 at 07:32:45:855: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:send TO Endpoint: 501 http://localhost:8003/RemoteTPPDI-TestWS-context-root/TestWSSoapHttpPort
2009.08.28 at 07:32:45:856: Thread-10: B2B - (DEBUG)
Protocol = HTTP
Version = 1.0
Transport Header
Content-Transfer-Encoding:binary
ACTION_NAME:RemoteTPTestBA
DATE:Fri, 28 Aug 2009 07:32:44 GMT
TO:RemoteTP
DOCTYPE_NAME:RemoteTPDoc1
FROM_PARTY:HostTP
DOCTYPE_REVISION:1.0
FROM:HostTP
MESSAGE-ID:83667220
TO_PARTY:RemoteTP
Content-Type:text/plain; charset=us-ascii
Connection:close
Parameters
-- listing properties --
http.sender.timeout=0
2009.08.28 at 07:32:46:101: Thread-10: B2B - (DEBUG) scheme null userName null realm null
2009.08.28 at 07:32:46:339: Thread-10: B2B - (WARNING)
Message Transmission Transport Exception
Transport Error Code is OTA-HTTP-SEND-415
StackTrace oracle.tip.transport.TransportException: [IPT_HttpSendError] HTTP encounters send error :415
at oracle.tip.transport.TransportException.create(TransportException.java:91)
at oracle.tip.transport.basic.HTTPSender.createTransportResponse(HTTPSender.java:793)
at oracle.tip.transport.basic.HTTPSender.send(HTTPSender.java:598)
at oracle.tip.transport.b2b.B2BTransport.send(B2BTransport.java:311)
at oracle.tip.adapter.b2b.transport.TransportInterface.send(TransportInterface.java:1013)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1754)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:972)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1166)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
at java.lang.Thread.run(Thread.java:534)
2009.08.28 at 07:32:46:339: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:send Error in sending message
2009.08.28 at 07:32:46:340: Thread-10: B2B - (INFORMATION) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Request Message Transmission failed
2009.08.28 at 07:32:46:340: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Enter
2009.08.28 at 07:32:46:340: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2009.08.28 at 07:32:46:341: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Leave
2009.08.28 at 07:32:46:341: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab [IPT_HttpSendError] HTTP encounters send error :415
[IPT_HttpSendError] HTTP encounters send error :415
2009.08.28 at 07:32:47:172: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:notifyApp retry value <= 0, so sending exception to IP_IN_QUEUE
2009.08.28 at 07:32:47:203: Thread-10: B2B - (DEBUG) Engine:notifyApp Enter
2009.08.28 at 07:32:47:212: Thread-10: B2B - (DEBUG) Enqueue Engine AQJMSCorrelationID = 722FB0840F821DDDE04400144F96EEDE
2009.08.28 at 07:32:47:212: Thread-10: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>83667220</correlationId>
<b2bMessageId>83667220</b2bMessageId>
<errorCode>AIP-50079</errorCode>
<errorText>Transport error: [IPT_HttpSendError] HTTP encounters send error :415
[IPT_HttpSendError] HTTP encounters send error :415
.</errorText>
<errorDescription>
<![CDATA[Machine Info: (HostTPis.com)
Transport error: [IPT_HttpSendError] HTTP encounters send error :415
[IPT_HttpSendError] HTTP encounters send error :415
. ]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2009.08.28 at 07:32:47:214: Thread-10: B2B - (DEBUG) AQJMSCorrelationID = 722FB0840F821DDDE04400144F96EEDE
2009.08.28 at 07:32:47:240: Thread-10: B2B - (DEBUG) Engine:notifyApp Exit
2009.08.28 at 07:32:47:240: Thread-10: B2B - (DEBUG) DBContext commit: Enter
2009.08.28 at 07:32:47:247: Thread-10: B2B - (DEBUG) DBContext commit: Transaction.commit()
2009.08.28 at 07:32:47:247: Thread-10: B2B - (DEBUG) DBContext commit: Leave
2009.08.28 at 07:32:47:248: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequest Exit
2009.08.28 at 07:32:47:303: Thread-10: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage:
***** REQUEST MESSAGE *****
Exchange Protocol: Generic Version 1.0
Transport Protocol: HTTP
Unique Message ID: 83667220
Trading Partner: RemoteTP
Message Signed: No
Payload encrypted: No
Information incompleteHi Anuj,
I changed to HTTP version 1.1 with SOAP version 1.1 and ebMS 2.0.
B2B log:
009.08.28 at 08:38:56:747: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage EBMSVersion: 2.0
2009.08.28 at 08:38:56:747: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage Trying to build soap message
2009.08.28 at 08:38:56:752: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage soap message built
2009.08.28 at 08:38:56:753: Thread-10: B2B - (DEBUG) EBMSExchangePlugin:resetInputStream not resetting stream source
2009.08.28 at 08:38:56:756: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage soap message - .1: <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:eb="http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd" xsi:schemaLocation="http://schemas.xmlsoap.org/soap/envelope/ http://www.oasis-open.org/committees/ebxml-msg/schema/envelope.xsd http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd"><env:Header><eb:MessageHeader env:mustUnderstand="1" eb:version="2.0"><eb:From><eb:PartyId/></eb:From></eb:MessageHeader></env:Header><env:Body/></env:Envelope>
2009.08.28 at 08:38:56:757: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage work area not null
2009.08.28 at 08:38:56:757: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage property name = AQJMSCorrelationID
2009.08.28 at 08:38:56:758: Thread-10: B2B - (DEBUG) EBMSExchangePlugin:resetInputStream not resetting stream source
2009.08.28 at 08:38:56:760: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage soap message - 1: <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:eb="http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd" xsi:schemaLocation="http://schemas.xmlsoap.org/soap/envelope/ http://www.oasis-open.org/committees/ebxml-msg/schema/envelope.xsd http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd"><env:Header><eb:MessageHeader env:mustUnderstand="1" eb:version="2.0"><eb:From><eb:PartyId eb:type="Generic Identifier">HostTP</eb:PartyId></eb:From></eb:MessageHeader></env:Header><env:Body/></env:Envelope>
2009.08.28 at 08:38:56:761: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage pingmsg = false pongMsg = false isStatusRequestMsg false isStatusResponseMsg false
2009.08.28 at 08:38:56:763: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage b2bMessageID is not null, using that 92775561
2009.08.28 at 08:38:56:763: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage checking to see if msg id is in the correct format
2009.08.28 at 08:38:56:763: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage msg id must have an '@' sign according to the ebms standard. Generating new id..
2009.08.28 at 08:38:56:765: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:isAckRequested Enter
2009.08.28 at 08:38:56:766: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:isAckRequested returning false
2009.08.28 at 08:38:56:766: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage request doesnt need to be signed
2009.08.28 at 08:38:56:766: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSServiceName Enter
2009.08.28 at 08:38:56:767: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSServiceName Returning service name:null
2009.08.28 at 08:38:56:767: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSServiceName Enter
2009.08.28 at 08:38:56:767: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSServiceName Returning service name:null
2009.08.28 at 08:38:56:767: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage setting service name = null
2009.08.28 at 08:38:56:768: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSServiceType Enter
2009.08.28 at 08:38:56:768: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSServiceType Returning service type:null
2009.08.28 at 08:38:56:768: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSServiceType Enter
2009.08.28 at 08:38:56:769: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSServiceType Returning service type:null
2009.08.28 at 08:38:56:769: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage setting service type = null
2009.08.28 at 08:38:56:769: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSFromRole Enter
2009.08.28 at 08:38:56:770: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSFromRole Returning from role:null
2009.08.28 at 08:38:56:770: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSFromRole Enter
2009.08.28 at 08:38:56:770: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSFromRole Returning from role:null
2009.08.28 at 08:38:56:771: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage setting from role = null
2009.08.28 at 08:38:56:771: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage setting from overRideHeader = null
2009.08.28 at 08:38:56:771: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSToRole Enter
2009.08.28 at 08:38:56:771: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSToRole Returning to role:null
2009.08.28 at 08:38:56:772: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSToRole Enter
2009.08.28 at 08:38:56:772: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSToRole Returning to role:null
2009.08.28 at 08:38:56:772: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage setting to role = null
2009.08.28 at 08:38:56:773: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSActionName Enter
2009.08.28 at 08:38:56:773: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSActionName Returning action name:null
2009.08.28 at 08:38:56:773: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage action name = RemoteTPTestBA
2009.08.28 at 08:38:56:774: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage refToMsgId is null
2009.08.28 at 08:38:56:774: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage setting manifest for message
2009.08.28 at 08:38:56:776: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage generated payloadId:cid:0A4DBD5D12360284C08000002F358500
2009.08.28 at 08:38:56:778: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage This is stream source mode
2009.08.28 at 08:38:56:779: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage xml payload <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body xmlns:ns1="http://testws/types/">
<ns1:testElement>
<ns1:s>TEST</ns1:s>
</ns1:testElement>
</soap:Body>
</soap:Envelope>
2009.08.28 at 08:38:56:785: Thread-10: B2B - (DEBUG) EBMSExchangePlugin:resetInputStream resetting stream source
2009.08.28 at 08:38:56:786: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage final soap message: ------=_Part_2_3316214.1251448736779
Content-Type: text/xml;charset=UTF-8
<?xml version="1.0" encoding="UTF-8" ?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:eb="http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd" xsi:schemaLocation="http://schemas.xmlsoap.org/soap/envelope/ http://www.oasis-open.org/committees/ebxml-msg/schema/envelope.xsd http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd"><env:Header><eb:MessageHeader env:mustUnderstand="1" eb:version="2.0"><eb:From><eb:PartyId eb:type="Generic Identifier">HostTP</eb:PartyId></eb:From><eb:To><eb:PartyId eb:type="Generic Identifier">RemoteTP</eb:PartyId></eb:To><eb:CPAId>RemoteTPTest</eb:CPAId><eb:ConversationId>HostTP@0A4DBD5D12360284BFC000002F358200</eb:ConversationId><eb:Service/><eb:Action>RemoteTPTestBA</eb:Action><eb:MessageData><eb:MessageId>HostTP@0A4DBD5D12360284BFC000002F358200</eb:MessageId><eb:Timestamp>2009-08-28T08:38:56.000Z</eb:Timestamp></eb:MessageData></eb:MessageHeader></env:Header><env:Body><eb:Manifest eb:id="oracle0A4DBD5D12360284C07000002F358300" eb:version="2.0"><eb:Reference eb:id="payloadref-0A4DBD5D12360284C07000002F358400" xlink:href="cid:0A4DBD5D12360284C08000002F358500" xlink:type="simple"/></eb:Manifest></env:Body></env:Envelope>
------=_Part_2_3316214.1251448736779
Content-Type: text/xml
Content-Id: <0A4DBD5D12360284C08000002F358500>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body xmlns:ns1="http://testws/types/">
<ns1:testElement>
<ns1:s>TEST</ns1:s>
</ns1:testElement>
</soap:Body>
</soap:Envelope>
------=_Part_2_3316214.1251448736779--
2009.08.28 at 08:38:56:786: Thread-10: B2B - (DEBUG) EBMSExchangePlugin:resetInputStream resetting stream source
2009.08.28 at 08:38:56:791: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage adding headers
2009.08.28 at 08:38:56:792: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage adding content type header
2009.08.28 at 08:38:56:792: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage adding content type header value is multipart/related;type="text/xml";boundary="----=_Part_3_1702949.1251448736786";start="<ebxheader-0A4DBD5D12360284BEB000002F358100>"
2009.08.28 at 08:38:56:792: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage Exit
2009.08.28 at 08:38:56:792: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Invoking PackMessage
2009.08.28 at 08:38:56:793: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Invoking Pre-Transmit
2009.08.28 at 08:38:56:793: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit Enter
2009.08.28 at 08:38:56:794: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit Log & Update Database Tables
2009.08.28 at 08:38:56:795: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit Update the Message Table Row with message state Wait for Incoming Acknowledgment
2009.08.28 at 08:38:56:795: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit Create a Native Event Table row for outgoing Request Message
2009.08.28 at 08:38:56:795: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(3 params) Enter
2009.08.28 at 08:38:56:796: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:insertNativeEvtTblRow msgInfo.id = HostTP@0A4DBD5D12360284BFC000002F358200
2009.08.28 at 08:38:56:797: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:protocl id set A
2009.08.28 at 08:38:56:797: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:
** DbAccess:insertNativeEvtTblRow protocolCollabId = HostTP@0A4DBD5D12360284BFC000002F358200
2009.08.28 at 08:38:56:820: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(3 params) Exit
2009.08.28 at 08:38:56:827: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit Create Event Table row for Message Retries
2009.08.28 at 08:38:56:827: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit timeToAck = Thu Jan 01 00:00:00 GMT 1970
2009.08.28 at 08:38:56:828: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit business transaction info name null revision null
2009.08.28 at 08:38:56:828: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit Exit
2009.08.28 at 08:38:56:829: Thread-10: B2B - (DEBUG) DBContext commit: Enter
2009.08.28 at 08:38:56:831: Thread-10: B2B - (DEBUG) DBContext commit: Transaction.commit()
2009.08.28 at 08:38:56:832: Thread-10: B2B - (DEBUG) DBContext commit: Leave
2009.08.28 at 08:38:56:832: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Calling Send to transmit the message
2009.08.28 at 08:38:56:832: Thread-10: B2B - (DEBUG) Protocol Name: HTTP
2009.08.28 at 08:38:56:833: Thread-10: B2B - (DEBUG) Version Name: 1.1
2009.08.28 at 08:38:56:833: Thread-10: B2B - (DEBUG) Endpoint: http://10.77.189.109:8003/RemoteTPPDI-TestWS-context-root/TestWSSoapHttpPort
2009.08.28 at 08:38:56:834: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:send URL: HTTP://10.77.189.109:8003/RemoteTPPDI-TESTWS-CONTEXT-ROOT/TESTWSSOAPHTTPPORT
2009.08.28 at 08:38:56:835: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:send TO Endpoint: 501 http://10.77.189.109:8003/RemoteTPPDI-TestWS-context-root/TestWSSoapHttpPort
2009.08.28 at 08:38:56:838: Thread-10: B2B - (DEBUG)
Protocol = HTTP
Version = 1.1
Transport Header
DOCTYPE_NAME:RemoteTPDoc1
SOAPAction:"ebXML"
TO_PARTY:RemoteTP
DOCTYPE_REVISION:1.0
ACTION_NAME:RemoteTPTestBA
FROM_PARTY:HostTP
Content-Type:multipart/related;type="text/xml";boundary="----=_Part_3_1702949.1251448736786";start="<ebxheader-0A4DBD5D12360284BEB000002F358100>"
Content-Length:1860
Parameters
-- listing properties --
http.sender.timeout=0
2009.08.28 at 08:38:56:840: Thread-10: B2B - (DEBUG) scheme null userName null realm null
2009.08.28 at 08:38:56:866: Thread-10: B2B - (WARNING)
Message Transmission Transport Exception
Transport Error Code is OTA-HTTP-SEND-500
StackTrace oracle.tip.transport.TransportException: [IPT_HttpSendError] HTTP encounters send error :500
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns0="http://testws/types/"><env:Body><env:Fault><faultcode>env:MustUnderstand</faultcode><faultstring>SOAP must understand error: {http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd}MessageHeader</faultstring></env:Fault></env:Body></env:Envelope>.
at oracle.tip.transport.TransportException.create(TransportException.java:91)
at oracle.tip.transport.basic.HTTPSender.createTransportResponse(HTTPSender.java:793)
at oracle.tip.transport.basic.HTTPSender.send(HTTPSender.java:598)
at oracle.tip.transport.b2b.B2BTransport.send(B2BTransport.java:311)
at oracle.tip.adapter.b2b.transport.TransportInterface.send(TransportInterface.java:1013)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1754)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:972)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1166)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
at java.lang.Thread.run(Thread.java:534)
2009.08.28 at 08:38:56:866: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:send Error in sending message
2009.08.28 at 08:38:56:867: Thread-10: B2B - (INFORMATION) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Request Message Transmission failed
2009.08.28 at 08:38:56:867: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Enter
2009.08.28 at 08:38:56:867: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2009.08.28 at 08:38:56:868: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Leave
2009.08.28 at 08:38:56:868: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab [IPT_HttpSendError] HTTP encounters send error :500
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns0="http://testws/types/"><env:Body><env:Fault><faultcode>env:MustUnderstand</faultcode><faultstring>SOAP must understand error: {http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd}MessageHeader</faultstring></env:Fault></env:Body></env:Envelope>.
[IPT_HttpSendError] HTTP encounters send error :500
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns0="http://testws/types/"><env:Body><env:Fault><faultcode>env:MustUnderstand</faultcode><faultstring>SOAP must understand error: {http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd}MessageHeader</faultstring></env:Fault></env:Body></env:Envelope>.
2009.08.28 at 08:38:56:885: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:notifyApp retry value <= 0, so sending exception to IP_IN_QUEUE
2009.08.28 at 08:38:56:887: Thread-10: B2B - (DEBUG) Engine:notifyApp Enter
2009.08.28 at 08:38:56:895: Thread-10: B2B - (DEBUG) Enqueue Engine AQJMSCorrelationID = 72309D4B835925B9E04400144F96EEDE
2009.08.28 at 08:38:56:896: Thread-10: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>92775561</correlationId>
<b2bMessageId>92775561</b2bMessageId>
<errorCode>AIP-50079</errorCode>
<errorText>Transport error: [IPT_HttpSendError] HTTP encounters send error :500
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns0="http://testws/types/"><env:Body><env:Fault><faultcode>env:MustUnderstand</faultcode><faultstring>SOAP must understand error: {http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd}MessageHeader</faultstring></env:Fault></env:Body></env:Envelope>.
[IPT_HttpSendError] HTTP encounters send error :500
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns0="http://testws/types/"><env:Body><env:Fault><faultcode>env:MustUnderstand</faultcode><faultstring>SOAP must understand error: {http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd}MessageHeader</faultstring></env:Fault></env:Body></env:Envelope>.</errorText>
<errorDescription>
<![CDATA[Machine Info: (dgia21a.HostTPis.com)
Transport error: [IPT_HttpSendError] HTTP encounters send error :500
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns0="http://testws/types/"><env:Body><env:Fault><faultcode>env:MustUnderstand</faultcode><faultstring>SOAP must understand error: {http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd}MessageHeader</faultstring></env:Fault></env:Body></env:Envelope>.
[IPT_HttpSendError] HTTP encounters send error :500
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns0="http://testws/types/"><env:Body><env:Fault><faultcode>env:MustUnderstand</faultcode><faultstring>SOAP must understand error: {http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd}MessageHeader</faultstring></env:Fault></env:Body></env:Envelope>. ]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2009.08.28 at 08:38:56:897: Thread-10: B2B - (DEBUG) AQJMSCorrelationID = 72309D4B835925B9E04400144F96EEDE
2009.08.28 at 08:38:56:929: Thread-10: B2B - (DEBUG) Engine:notifyApp Exit
2009.08.28 at 08:38:56:930: Thread-10: B2B - (DEBUG) DBContext commit: Enter
2009.08.28 at 08:38:56:933: Thread-10: B2B - (DEBUG) DBContext commit: Transaction.commit()
2009.08.28 at 08:38:56:934: Thread-10: B2B - (DEBUG) DBContext commit: Leave
2009.08.28 at 08:38:56:934: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequest Exit
2009.08.28 at 08:38:56:936: Thread-10: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage:
***** REQUEST MESSAGE *****
Exchange Protocol: ebMS Version 2.0
Transport Protocol: HTTP
Unique Message ID: HostTP@0A4DBD5D12360284BFC000002F358200
Trading Partner: RemoteTP
Message Signed: No
Payload encrypted: No
Information incomplete -
Remote Debugging w/Eclipse Transport Error
I am requesting help on a problem I am encountering using remote debugging with eclipse and Weblogic 8.1.2. I have successfully used remote debugging in the past with other application servers, but I have been unsuccessful with Weblogic 8.1.
I have set the remote debugging options both on the weblogic start script as well as configured eclipse to connect to the port that was defined in the startup script (See Below). When I start the remote debugger within eclipse and it seems to connect properly. Once I set a break point or remove a break point, weblogic generates a "Transport error, error code = -1" and stops the debugger with in Eclipse.
At this point I am at a loss of what is causing this error. I would appreciate any help on this issue.
Operating System: WindowsXP Pro
Weblogic Version: 8.1.2
Eclipse 3.2
JDK 1.4.2
JAVA_OPTS: =-Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_socket,address=7777,server=y,suspend=n
Thanks!
Rafael SalazarInteresting. I tried it and it works. you might want to check your Eclipse port number. In addition try netstat -a to see if port 1044 is active.
This one might also help: http://www.jacoozi.com/index.php?option=com_content&task=view&id=119&Itemid=134
Let me know if you have any questions. -
Hello everyone :
I can't switchover to primary. following is error and information.
RHEL 6.3 x86-64
Oracle database 11.2.0.3.0 Enterprise edition
Primary database = orclprmy
Standby database = orclstby1
##### /etc/hosts on orclstby1
[root@orclstby1 admin]# cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.50.211 ttprmy
192.168.50.212 orclstby1
### DG broker error
DGMGRL for Linux: Version 11.2.0.3.0 - 64bit Production
Copyright (c) 2000, 2009, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
Connected.
DGMGRL> show configuration;
Configuration - TTDGConfig1
Protection Mode: MaxPerformance
Databases:
orclstby1 - Primary database
Error: ORA-16778: redo transport error for one or more databases
orclprmy - Physical standby database
Fast-Start Failover: DISABLED
Configuration Status:
ERROR
DGMGRL>
########### listener.ora on orclstby1
[root@orclstby1 admin]# cat listener.ora
# listener.ora Network Configuration File: /u2/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = orclstby1)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME=orcl)
(SID_NAME = orclstby1)
(ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
(SID_DESC =
(GLOBAL_DBNAME=orclstby1)
(SID_NAME = orclstby1)
(ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
(SID_DESC =
(GLOBAL_DBNAME=orclstby1_DGMGRL)
(SID_NAME = orclstby1)
(ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
ADR_BASE_LISTENER = /u2/oracle
############## tnsnames.ora on orclstby1
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orcl))
orclprmy =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.211)(PORT = 1521))
(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclprmy))
orclprmy_DGMGRL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.211)(PORT = 1521))
(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclprmy_DGMGRL))
orclstby1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclstby1))
orclstby1_DGMGRL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclstby1_DGMGRL))
##### alert log on orclstby1.
Fatal NI connect error 12504, connecting to:
(DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=)(CID=(PROGRAM=oracle)(HOST=orclstby1)(USER=oracle)))(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.50.211)(PORT=1521)))
VERSION INFORMATION:
TNS for Linux: Version 11.2.0.3.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.3.0 - Production
Time: 06-SEP-2013 13:19:55
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
There is problem in alert log.
In the /etc/hosts file. The standby server (orclstby1) ip is 192.168.50.212. but alert log is 192.168.50.211.
Is any idea?
Thanks for help.
消息编辑者为:user4914135#### on primary database
SQL> select dest_name,status,target,archiver,schedule, valid_type,valid_role,db_unique_name,error from v$archive_dest;
DEST_NAME STATUS TARGET ARCHIVER SCHEDULE VALID_TYPE VALID_ROLE DB_UNIQUE_NAME
ERROR
LOG_ARCHIVE_DEST_1 VALID LOCAL ARCH ACTIVE ALL_LOGFILES ALL_ROLES orclprmy
LOG_ARCHIVE_DEST_2 VALID REMOTE LGWR PENDING ALL_LOGFILES PRIMARY_ROLE orclstby1
LOG_ARCHIVE_DEST_3 INACTIVE LOCAL ARCH INACTIVE ALL_LOGFILES ALL_ROLES NONE
#### on standby database
SQL> select dest_name,status,target,archiver,schedule, valid_type,valid_role,db_unique_name,error from v$archive_dest;
DEST_NAME STATUS TARGET ARCHIVER SCHEDULE VALID_TYPE VALID_ROLE DB_UNIQUE_NAME
ERROR
LOG_ARCHIVE_DEST_1 VALID PRIMARY ARCH ACTIVE ALL_LOGFILES ALL_ROLES orclstby1
LOG_ARCHIVE_DEST_2 ERROR STANDBY LGWR PENDING ONLINE_LOGFILE PRIMARY_ROLE orclprmy
ORA-12504: TNS:listener was not given the SERVICE_NAME in
CONNECT_DATA
LOG_ARCHIVE_DEST_3 INACTIVE PRIMARY ARCH INACTIVE ALL_LOGFILES ALL_ROLES NONE
#### log_archive_dest on primary database
SQL> show parameter log_archive_dest
NAME TYPE VALUE
log_archive_dest string
log_archive_dest_1 string location=/u3/arch/orcl vali
d_for=(ALL_LOGFILES,ALL_ROLES)
db_unique_name=orclprmy
log_archive_dest_10 string
log_archive_dest_11 string
log_archive_dest_12 string
log_archive_dest_13 string
log_archive_dest_14 string
log_archive_dest_15 string
log_archive_dest_16 string
log_archive_dest_17 string
log_archive_dest_18 string
log_archive_dest_19 string
log_archive_dest_2 string service="orclstby1", LGWR ASYNC
NOAFFIRM delay=0 optional comp
ression=disable max_failure=0
max_connections=1 reopen=300 d
b_unique_name="orclstby1" net_ti
meout=30, valid_for=(all_logfi
les,primary_role)
log_archive_dest_20 string
log_archive_dest_21 string
log_archive_dest_22 string
#### log_archive_dest on standby database
SQL> show parameter log_archive_dest
NAME TYPE VALUE
log_archive_dest string
log_archive_dest_1 string location=/u3/arch/orclstby1 vali
d_for=(ALL_LOGFILES,ALL_ROLES)
db_unique_name=orclstby1
log_archive_dest_10 string
log_archive_dest_11 string
log_archive_dest_12 string
log_archive_dest_13 string
log_archive_dest_14 string
log_archive_dest_15 string
log_archive_dest_16 string
log_archive_dest_17 string
log_archive_dest_18 string
log_archive_dest_19 string
log_archive_dest_2 string service=orclprmy ASYNC valid_for
=(ONLINE_LOGFILE,PRIMARY_ROLE)
db_unique_name=orclprmy
log_archive_dest_20 string
log_archive_dest_21 string
log_archive_dest_22 string
log_archive_dest_23 string
log_archive_dest_24 string
log_archive_dest_25 string
#### spfile on standby database
</u2/oracle/product/11.2.0/dbhome_1/dbs> strings spfileorclstby1.ora
orcl.__db_cache_size=1040187392
orclstby1.__db_cache_size=1090519040
orcl.__java_pool_size=16777216
orclstby1.__java_pool_size=16777216
orcl.__large_pool_size=16777216
orclstby1.__large_pool_size=16777216
orcl.__oracle_base='/u2/oracle'#ORACLE_BASE set from environment
orclstby1.__oracle_base='/u2/oracle'#ORACLE_BASE set from environment
orcl.__pga_aggregate_target=536870912
orclstby1.__pga_aggregate_target=536870912
orcl.__sga_target=1610612736
orclstby1.__sga_target=161061273
orcl.__shared_io_pool_size=0
orclstby1.__shared_io_pool_size=0
orcl.__shared_pool_size=503316480
orclstby1.__shared_pool_size=469762048
orcl.__streams_pool_size=16777216
orclstby1.__streams_pool_size=0
*.archive_lag_target=0
*.audit_file_dest='/u2/oracle/admin/orclstby1/adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='/u2/oracle/oradata/orclstby1/control01.ctl','/u2/oracle/fast_recovery_area/orclstby1/control02.ctl'
*.db_block_size=8192
*.db_domain=''
*.db_file_nam
e_convert='orcl','orclstby1'
*.db_name='orcl'
*.db_recovery_file_dest='/u2/oracle/fast_recovery_area'
*.db_recovery_file_dest_size=5218762752
*.db_unique_name='orclstby1'
*.deferred_segment_creation=FALSE
*.dg_broker_start=TRUE
*.diagnostic_dest='/u2/oracle'
*.fal_client='orclstby1'
*.fal_server='orclprmy'
*.log_archive_config='dg_config=(orclprmy,orclstby1)'
*.log_archive_dest_1='location=/u3/arch/orclstby1 valid_for=(ALL_LOGFILES,ALL_ROLES) db_unique_name=orclstby1'
*.log_archive_dest_2='ser
vice=orclprmy ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=orclprmy'
*.log_archive_dest_state_2='ENABLE'
orcl.log_archive_format='orcl_%t_%s_%r.arc'
*.log_archive_format='orclstby1_%t_%s_%r.arc'
orclstby1.log_archive_format='orclstby1_%t_%s_%r.arc'
*.log_archive_max_processes=4
*.log_archive_min_succeed_dest=1
orcl.log_archive_trace=0
orclstby1.log_archive_trace=0
*.log_file_name_convert='orcl','orclstby1'
*.open_cursors=300
*.pga_aggregate_target=536870912
*.processes=
1500
*.remote_login_passwordfile='EXCLUSIVE'
*.sessions=1655
*.sga_target=1610612736
*.standby_file_management='AUTO'
*.undo_tablespace='UNDOTBS1'
</u2/oracle/product/11.2.0/dbhome_1/dbs>
Thank you for your help. -
Transport error 202 bind failed address already in use
how to rectify -- transport error 202 bind failed address already in use-- while running CA server
i have created new production and pub server, first i runned production server after that while running CA server i got that error. if i run CA server independently its runningIt seems like a port conflict issue. You should check rmi and other ports in the configuration file for the component /atg/dynamo/Configuration in the localconfig of your production and publishing servers directories under <ATG>\home\servers. Also, your app server should be configured to run two separate instances for production and publishing server as per the http ports specified in /atg/dynamo/Configuration.
-
Open Hub Destination - Transport Error
Hi,
Following error occured while transporting the Open Hub Destination(OHD) to QA.
Created OHD using Logical file as File type.
Syntax group: WINDOWS NT.
Transport Error Log:
Start of the after-import method RS_DEST_AFTER_IMPORT for object type(s) DEST (Activation Mode)
Application server bidwXXX does not exist.
Start of the after-import method RS_DEST_AFTER_IMPORT for object type(s) DEST (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for DEST L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)
are we missing anything configuration here?
RegardsAnanda,
This is my file path in Dev:
D:\usr\sap\<SYSID>\DVEBMGS00\work\<FILENAME> in this path i have mentioned BWD instead of <SYSID> initially, it failed so i thought i would give a try by giving the parameter <SYSID> instead of BWD, even that failed.
When i have transported OHD with the path D:\usr\sap\<SYSID>\DVEBMGS00\work\<FILENAME> it was created in QA in the same directory as mentioned in Dev.So i believe i have the right file path in QA.
Thanks. -
MDM 2 outbound Message Got Transport Error
Hi
I am trying to execute a command for a Device (Connect/Disconnect/On demand read) but once the Outbound Comm Object is reaches the Awaiting Response life cycle State, It errors out on receiving a Synchronous Error Response. Following is the list of Log entries for Outbound Comm object -
6. 11-26-2011 10:15PM Transitioned to Response Error. Student , 01 ( USER01 ) Status Transition
5. 11-26-2011 10:15PM Outbound message got transport error. Please check "How to Create Activity Outbound Communication" configuration. Student , 01 ( USER01 ) Exception Universal Head-End System, Disconnect Device, Real-time, Error
4.00 11-26-2011 10:15PM Outbound Message is sent to Head-End System. Student , 01 ( USER01 ) System Universal Head-End System, Disconnect Device, Real-time, Error
3.00 11-26-2011 10:15PM Transitioned to Awaiting Response. Student , 01 ( USER01 ) Status Transition
2.00 11-26-2011 10:15PM Transitioned to Validate. Student , 01 ( USER01 ) Status Transition
1.00 11-26-2011 10:15PM Created in status Pending.
Also , Synchronous response is supposed to be sent by head end in a actual scenario. how the OB COmm BO is getting any sync response?We have found the cause of my problem.
On the configuration of our Outbound Message XAI Receiver F1OUTBNDMSG, we had the Executer ID set to XAIURL (Remote XAI). This caused the XAI Receiver to initiate the Inbound XAI call. The correct configuration is to set the Executer ID to BYPASSXAI.
The CC&B 2.3.1 help files explain this well as seen below:
XAI Receiver - Main
Identify the Executer ID. Select the XAILOCAL executer if the XAI class for this receiver is STGCTLRCVR. Select the BYPASSXAI executer if the XAI class for this receiver is OUTMSGRCVR. For all other receivers select the XAIURL executer. For more information, refer to XAI Executer.
Unfortunately, we were looking at CC&B 2.2 documentation and it does not contain the above information. -
Transport error in one instance of B2B
We have two instances of B2B in cluster and both point to single meta data repository. We have a trading parter which uses SFTP protocol and places the files on to a file system. If the request goes to first instance its processed successfully and the file is placed on to the file system. But we are getting a Transport error when the request goes to the B2B second instance. We tried ssh from the server where second instance is to the destination unix box with the same user id and password and it works.
Has any one faced this issue?
Thanks
RakeshPlease find below the logs from b2b_dc_transport.log in DEBUG mode
oracle.tip.transport.TransportException: Authenctication failed or further authentication required. Status : 2
at oracle.tip.transport.basic.SFTPFileSender.send(SFTPFileSender.java:159)
at oracle.tip.transport.b2b.B2BTransport.send(B2BTransport.java:311)
at oracle.tip.adapter.b2b.transport.TransportInterface.send(TransportInterface.java:1013)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1754)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:972)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1166)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
at java.lang.Thread.run(Thread.java:534)
2009.12.04 at 02:14:27:342: Thread-44: (ERROR) Error sending message :
oracle.tip.transport.TransportException: Authenctication failed or further authentication required. Status : 2
at oracle.tip.transport.basic.SFTPFileSender.send(SFTPFileSender.java:159)
at oracle.tip.transport.b2b.B2BTransport.send(B2BTransport.java:311)
at oracle.tip.adapter.b2b.transport.TransportInterface.send(TransportInterface.java:1013)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1754)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:972)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1166)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
at java.lang.Thread.run(Thread.java:534)
2009.12.04 at 02:15:11:810: ComponentManager: (ERROR) Closing Client
2009.12.04 at 02:15:11:811: ComponentManager: (ERROR) Closing Client
2009.12.04 at 02:15:11:811: ComponentManager: (ERROR) Closing Client
The same configuration works fine on the other node and the data is sucessfully placed on to the file system. When we login into the B2B UI from individual servers we see the configuration being updated and same ie the same host details and same user id
Thanks
Rakesh
Maybe you are looking for
-
Running iTunes on XP and OSX using same music folder?
Hi, I'm just starting to use OSX and XP in almost equal amounts after using XP on my MBP almost exclusively for over a year. The big difficulty at the moment is with the fact that my music is all on my XP partition (NTFS) and therefore not set up und
-
Printer prints fine off PC...but when I copy, it prints black lines down the page
-
iChat won't open. The computer thinks that is open, but it isnt and I have to force quit it. The same problem happened with iTunes, but other programs in the iLife set have been working fine. Please help!
-
ORA-00903: invalid table name
I am running Toplink 9.0.3 in Oracle 9i database. I have the following code which generates an SQL statement but the table name is missing in the sub query: ExpressionBuilder collInventoryLines = new ExpressionBuilder(); ExpressionBuilder maxDate = n
-
[SDK] AVDocPrintPagesWithParams使用方法を教えて下さい.
環境:Acrobat8 Professional VisualBasic6上でAcrobat SDKを操作しPDFをプリンタへ印刷する処理を作成しております. 通常は「AcroExch.AVDoc」メソッド内の「PrintPages」メソッドを使用しますが 「画像として印刷」を行う場合は.「PrintPages」メソッドでは指定できず 調べた結果「AVDocPrintPagesWithParams」メソッドを 使用する必要があるようです. しかし.「AVDocPrintPagesWithPara