BDC - continue after error

Hi,
1) How do I make the BDC that I am working on continue in the background, even if there is an error (Say a field isn't filled in or the entry is not valid, which can occur when a certain entered number does not exit in the database.)
It should continue from the record following the one that caused an error.
2) When the error occurs, I want to mark one field with the value 'X'. This is done, so that after all processing is complete, I will display a write screen with a field from the table, where the last field is marked as x.
Thanks,
John

hi
s...the error record will be skipped and the bdc will continue with the next record, if the mode is N
chk this thread
BDC - continue after error
if helpful, reward
Sathish. R

Similar Messages

Can 'copy' continue after error?

When doing a batch job such as copying files or converting audio formats, an annoying behavior is that when one file causes an error, the whole job stops. Is there a way to make it so the bad file doesn't copy or convert or whatever, but the job continues with the next one?

You posted in the iPad forum instead of the iPhone forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
 Cheers, Tom

Can WIndows NT BDCs continue to run after running ntdomainmigration.sh?

I understand that after running the ntdomainmigration.sh script, the Mac OS X server open directory master will replace the Windows primary domain controller and the the PDC should be removed from service after the migration is complete. My question is about existing backup domain controllers. Can the BDCs continue to function normally? Obviously they wont have the ability to replicate the open directory information but can they continue to exist as windows only BDCs or do they need to be removed from the network. Thanks

Hi
As far as I know only an Open Directory Replica can be an Open Directory Master’s BDC when the Master is also the PDC. Hence the suggested advice after running the script. I could be wrong though.
Tony

Error: Startup task doesn't exist. This is not a continuation after a restart

I want to try to install sharepoint 2013 on windows server 2008 r2 with sp1, but when I install the prerequistes, always restart again and again, I check the log file, found the below error:
2014-02-27 22:55:12 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
2014-02-27 22:55:12 - Error: Startup task doesn't exist. This is not a continuation after a restart.
2014-02-27 22:55:15 - Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
2014-02-27 22:55:15 - Last return code (0X3EC=1004)
2014-02-28 03:27:05 - Error: A pending restart blocks the installation
2014-02-28 04:45:03 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
2014-02-28 04:45:03 - Error: Startup task doesn't exist. This is not a continuation after a restart.
2014-02-28 04:45:03 - Locating the following command line arguments file:
2014-02-28 04:45:03 - C:\SP2013_Chery\2Installation\Sharepoint\PrerequisiteInstaller.Arguments.txt
2014-02-28 04:45:03 - Error: This file does not exist
Awen

Hi Awen,
According to your description, my understanding is that you got an error when you installed prerequisities for SharePoint 2013.
Please run the following command, compare the result:
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regii -enable –i
Here is a similar post for your reference:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/37cc20db-6cc7-45e0-928c-9a1ddbdab2ae/the-tool-was-unable-to-install-application-server-role-web-server-iis-role?forum=sharepointadmin
In addition, there is a KB article about this issue, please take a look at:
http://support.microsoft.com/kb/2765260/en-us
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Vista-switched from Explorer to FF 3.6- can't download versions/updates like Adobe Flash-error message: INSTALLER WILL CONTINUE AFTER CONFLICTING MOZILLA FF IS CLOSED-Most pics blocked on sites/programs-can't open some programs that Explorer opens- Help?

I have Vista, recently switched from Internet Explorer to FireFox 3.6-. Since switching over, it can't download alot of versions/updates like Adobe Flash: It error messages: "INSTALLER WILL CONTINUE AFTER CONFLICTING MOZILLA FIREFFOX IS CLOSED".
Most pics blocked on sites/programs. I can't open some programs that Explorer opens. I would sure appreciate any help!!!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases. Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

Bdc: selection screen error

HI,
In the bdc program, after uploading a file in the selection screen using parameter selection, the screen gets refrehed and returns to the selection screen with no further action. How do I solve this error?

*& Report ZSALES2
REPORT ZSALES2.
tables:VBAK,
       vbkd,
       kuagv,
       rv45a,
       vbap.
types :begin of t_records,
       AUART type VBAK-AUART,
       BSTKD type VBKD-BSTKD,
       BSTDK type VBKD-BSTDK,
       KUNNR type KUAGV-KUNNR,
       KETDAT type RV45A-KETDAT,
       KPRGBZ type RV45A-KPRGBZ,
       PRSDT type VBKD-PRSDT,
       ZTERM type VBKD-ZTERM,
       MABNR type RV45A-MABNR,
       KWMENG type RV45A-KWMENG,
       POSNR type VBAP-POSNR,
       end of t_records.
data: it_records type table of t_records,
        wa_records type t_records.
DATA : BDCDATA TYPE TABLE OF BDCDATA WITH HEADER LINE.
PARAMETERS : P_FILE LIKE RLGRAP-FILENAME.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
PERFORM GET_FILE.
start-of-selection.
PERFORM GET_DATA.
PERFORM BDCDATA.
*&      Form GET_FILE
      text
form GET_FILE .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME        = SYST-CPROG
DYNPRO_NUMBER       = SYST-DYNNR
                        FIELD_NAME          = ' '
IMPORTING
FILE_NAME           = P_FILE.
endform.                    " GET_FILE
form GET_DATA.
DATA:V_FILE TYPE STRING.
V_FILE = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    filename                      = V_FILE
   FILETYPE                      = 'DAT'
   HAS_FIELD_SEPARATOR           = 'X'
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
VIRUS_SCAN_PROFILE            =
NO_AUTH_CHECK                 = ' '
IMPORTING
FILELENGTH                    =
HEADER                        =
tables
    data_tab                      = it_records
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.    " GET_DATA.
form BDCDATA.
loop at it_records into wa_records.
*CALL TRANSCATION "VA01" USING BDCDATA.
perform bdc_dynpro      using 'SAPMV45A' '0101'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBAK-SPART'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'VBAK-AUART'
                              'OR'.
perform bdc_field       using 'VBAK-VKORG'
perform bdc_field       using 'VBAK-VTWEG'
perform bdc_field       using 'VBAK-SPART'
perform bdc_dynpro      using 'SAPMSSY0' '0120'.
perform bdc_field       using 'BDC_CURSOR'
                              '07/12'.
perform bdc_field       using 'BDC_OKCODE'
                              '=PICK'.
perform bdc_dynpro      using 'SAPMV45A' '4001'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBKD-BSTKD'.
perform bdc_field       using 'VBKD-BSTKD'
                              '123'.
perform bdc_field       using 'VBKD-BSTDK'
                              '08.10.2008'.
perform bdc_field       using 'KUAGV-KUNNR'
                              '31970063'.
perform bdc_dynpro      using 'SAPMSSY0' '0120'.
perform bdc_field       using 'BDC_CURSOR'
                              '04/21'.
perform bdc_field       using 'BDC_OKCODE'
                              'PICK'.
perform bdc_dynpro      using 'SAPMV45A' '4001'.
perform bdc_field       using 'RV45A-KETDAT'
                              '08.10.2008'.
perform bdc_field       using 'RV45A-KPRGBZ'
                              'D'.
perform bdc_field       using 'VBKD-PRSDT'
                              '08.10.2008'.
perform bdc_dynpro      using 'SAPMV45A' '4001'.
perform bdc_field       using 'VBKD-ZTERM'
                              '0001'.
perform bdc_dynpro      using 'SAPMSSY0' '0120'.
perform bdc_field       using 'BDC_CURSOR'
                              '06/11'.
perform bdc_field       using 'BDC_OKCODE'
                              '=PICK'.
perform bdc_dynpro      using 'SAPMV45A' '4001'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'VBKD-BSTKD'
                              '123'.
perform bdc_field       using 'VBKD-BSTDK'
                              '08.10.2008'.
perform bdc_field       using 'KUAGV-KUNNR'
                              '31970063'.
perform bdc_field       using 'KUWEV-KUNNR'
                              '31970063'.
perform bdc_field       using 'RV45A-KETDAT'
                              '08.10.2008'.
perform bdc_field       using 'RV45A-KPRGBZ'
                              'D'.
perform bdc_field       using 'VBKD-PRSDT'
                              '08.10.2008'.
perform bdc_field       using 'VBKD-ZTERM'
                              '0001'.
perform bdc_field       using 'BDC_CURSOR'
                              'RV45A-KWMENG(01)'.
perform bdc_field       using 'RV45A-MABNR(01)'
                              '102'.
perform bdc_field       using 'RV45A-KWMENG(01)'
                              '                  5'.
perform bdc_dynpro      using 'SAPMSSY0' '0120'.
perform bdc_field       using 'BDC_CURSOR'
                              '05/08'.
perform bdc_field       using 'BDC_OKCODE'
                              '=PICK'.
perform bdc_dynpro      using 'SAPMV45A' '4001'.
perform bdc_field       using 'RV45A-MABNR(01)'
                              '83'.
perform bdc_dynpro      using 'SAPMSSY0' '0120'.
perform bdc_field       using 'BDC_CURSOR'
                              '16/04'.
perform bdc_field       using 'BDC_OKCODE'
                              '=PICK'.
perform bdc_dynpro      using 'SAPMV45A' '4001'.
perform bdc_field       using 'RV45A-MABNR(01)'
                              '121'.
perform bdc_field       using 'VBAP-POSNR(01)'
                              '     1'.
perform bdc_dynpro      using 'SAPMV45A' '4001'.
perform bdc_field       using 'BDC_OKCODE'
                              '/EBAC1'.
perform bdc_field       using 'BDC_CURSOR'
                              'RV45A-MABNR(01)'.
perform bdc_transaction using 'VA01' .
CALL TRANSCATION 'VA01' USING BDCDATA.
ENDLOOP.
endform.   "BDCDATA
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO   = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM.
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
    CLEAR BDCDATA.
    BDCDATA-FNAM = FNAM.
    BDCDATA-FVAL = FVAL.
    APPEND BDCDATA.
ENDIF.
ENDFORM.
*&      Form BDC_TRANSACTION
      text
     -->P_0428   text
form BDC_TRANSACTION using    value(p_0428).
endform.                    " BDC_TRANSACTION

HT4623 my iphone froze up after error message

my iphone froze up after error message and i am now unable to restore. showing usb connections with arrow to Itunes. how do i fix this?

If by the "starting screen" you mean the Apple logo, then your phone is coming across a software issue that prevents it from finishing it's boot sequence. You will need to replace the software and firmware on the phone to get it back up and running. Doing this will also remove your data from the phone, so hopefully you have synced recently.
To put your phone into DFU recovery mode:
1. Make sure your phone is connected to a computer with iTunes on it.
2. Hold down the sleep/wake button and home button at the same time for 8 seconds.
3. Let go of the sleep/wake button and continue holding the home button.
4. If successful, the phone's display will main black and a dialogue box will appear in iTunes stating thet it detected a phone in recovery mode.
5. Click OK, then click Restore.
After that the phone should be up and running and you can sync your content back.

"Installation will continue after reboot"... then nothing... help?

I have a 1st generation intel imac, 20 inch, and have tried three times to upgrade from 10.5.8 to 10.6 (SL). I have unplugged all accessories, and every time i go to upgrade, at about 1/5th of the way, i get a message saying that the installation will continue after the computer has restarted. It restarts... and then nothing. I have not seen this posted before, so if it has been, I apologize. Any help would be appreciated.
Message was edited by: boxingflyer

I'm curious about what (if anything) the installer log file says about setting the DVD as the startup disk. Would you mind launching Console, going into the /private/var/log section & clicking on install.log if it is there? Look for a line in the log near the beginning of the lines that start with the date & time of the install attempt that contains the text "Setting Startup Disk" (without quotes). Anything after that that indicates an error? Is there a line (or two) with the text "Bless on Mac OS X Install DVD succeeded" a few lines below that?
Note that you can use the search box in Console to look for these text strings.

SWPC to restart workflows after error

I use SWPC normally to restart WFS after errors,But i can only do that for some Workflows..
Do i have to include the WFs in any configuration to be able to restart them after error..
For instance for a leave request Workflow when it is ended with errors,I was able to give the WI in teh SWPC and continue the WF
But for Other WF when it ended with error i am not able to see those WIS in SWPC to restart them..Please Suggest if tehre is any alternative to restart those WF's ?
Thanks in Advance

Hi,
Try using SWPR. Use this transaction where it is possible to continue from the exact point of failure without a new instance.
Hope it helps..!
Regards
Narin

Wait on reboot - and continue after?

Hi folks.
I'm having some issues with the reboot action.
2 bundles:
B1 - Install (Launch Exe) .NET Framework 4 ; Reboot.
B2 - Install B1 ; Install (Launch Exe) Expression Web 4.
B2 is the bundle that is associated to users.
So, the Install B1 action works fine - .Net installs and then prompts for reboot, but I then get an error for Install Expression Web 4 action.
I have a "continue on error" set for the Install B1 action (as .Net framework may already be installed on some users PCs).
It appears to me that the error is appearing because it is not waiting on the reboot? There is no "wait for action to complete" option for the reboot actions.
What is the best way to get Framework installed, reboot, then install Expression?
This isn't a force run. User launches it when convenient.
Thanks.

I dont think that a reboot or shutdown can be used in the middle of an action, but I think the following should work:
Put a requirement on B2, Bundle installed B1, remove the Install B1 action, make B2 launch on login and assign B1 to the user instead of B2.
The user would then launch B1 which reboots after install. At login B1 is installed so B2 will launched.

Delivery gets created in VL01N - Return scenario even after error message

Hi,
I am having following issue explained in details in steps -
We have a service return scenario and following steps have been followed in ECC.
Material code used in this case is batch managed material.
Step 1 u2013
We have created a sales order(VA01) with document type ZRE(Itu2019s a kind of return order). This return order actually coming from CRM.
Step 2 u2013
We are creating delivery using VL01N transaction for return order.
Step 3 u2013
We avoid giving batch number in VL01N and try to save the delivery document. System prompt error saying u201CEnter batchu201D. Subsequently we press return keys to cancel the error message and try to come out of the transaction.
Step 4 u2013
Instead inputting batch number, we try come out of the document creation step.
Step 5 u2013
We go to document flow button of sales order and we could see the delivery created although we came out of the delivery creation process after the error message, without saving the document.
Also note instead of coming out of the document creation, if we again try to save the document, system throws update termination with a reason saying u201CError info... ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPRECu201D, which is quite obvious as system has already created the delivery and we are trying to create / save the document once again in VL01N
We are in dilemma now.
What is the cause of this abnormal behaviour? I don't know.
Any one experienced this, feedback is appreciated,
Regards,
Dipak

Hi,
The SAPSQL_ARRAY_INSERT_DUPREC error is not bothering me much.
My worry is once "Enter batch" error message comes, I am not interested to create the delivery any more.
So I come out of the transaction by pressing return key.
Now when I press return key, system gives me the delivery number, this should not be the case as message given was an error message.
If I go to the SE16N, I could see the delivery number in database.
Also system prompts me to save the delivery which I am not interested to do, just I want to come out after error message.
What could be the reason, I don't know. Ever after error message system gives you the delivery.
Which is very strange.
Any input is apprecited,
Regards,
Dipak

Illustrator CS3 Crashes after "Error Loading Plugins"

so confused.
Upgraded to a new PC with Windows 7 64bit Enterprise.
Installed my CS3, and Illustrator crashes after "Error Loading Plugins".
I moved the .aip files in question from the folder to my desktop, then put them back, but 3 are still there. The other 3 resolved.
Took the 3 in question back out, then back in. no change
Left the 3 out. No "Error Loading Plugins" but still crashes with a "stopped working" non descript message.
I have been trying to search all over the net for six hours to no avail. Help me Obi Wan Kenobi, you're my only hope.

with Enterprise edition you should be able to download from Microsoft a winXP32 bit virtual OS and run CS3 Ai in that mode.

I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect. My Safari keeps kicking out and giving me error message after error message and my computer is really slow. How do I resolve? Can I uninstall this ?

I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect. My Safari keeps kicking out and giving me error message after error message and my computer is really slow. How do I resolve? Can I uninstall this ? I had to re-connect my iMovie t

USB2.0 PCI cards that use the NEC chipset seem to give the least amount of problems for Mac users.
OWC have a few different ones for sale.
http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7057&Ntt=USB2**0**cards
Do you also connect the external USB drive to the AC power as well while you use it ?
Sometimes USB external drive problems are resolved simply by plugging them into the mains power and trying again.
Stewie
Message was edited by: stewiesno1

How to make a BPM restartble at a specific point after error?

Hi,
I have a somewhat very simple question.
I have a BPM that works like this:
1. receive message A
2. transform message A to message B (using valuemapping)
3. switch with a condition determining if valuemapping was succesfull for all cases.
3.1. Branch 1
3.1.1. Send message B to R/3
3.2. Branch otherwise
3.2.1. Transform message B to errorMessage
3.2.2. Send errorMessage to R/3
This is all fine and works as intended.
Now what I would like is to somehow be able to "stop" the BPM after step 3.2.2. and somehow be able to reprocess the BPM starting from step 2..
The reason for this is that if the valuemapping was unsuccesfull it means a table needs to be updated. After updating the table it would be nice if the process could just be restarted and complete with success instead of having to send data through XI once again from sending system.
I've tried to experiment with exception handling in the BPM, but have not been successfull in finding a solution that works as intended.
Hope someone can help:-)
Best regards,
Daniel

Hi Kavita,
What I want is this:
If valuemapping is unsuccesfull I want to send errorMessage to R/3. Afterwards the BPM should stop. At some point someone (or XI ifself) will try to reprocess the BPM. In this case the BPM should basically start from my previous step 2 (Transformation step with valuemapping) and then go through it all again.
I a litle unclear what exactly you want me to try - is it something like this you mean?: - but what exactly goes in the exception branch? The time part I guess can be left out in my case, since I just wanna stop right away - but still we the posibility of starting from valuemapping step when reprocessing the BPM after error.
1. receive message A
2. Block
2.1. Exception branch
2.2. Control branch
2.2.1. Loop
2.2.1.1. transform message A to message B (using valuemapping)
2.2.1.2. switch with a condition determining if valuemapping was succesfull for all cases.
2.2.1.2.1. Branch 1
2.2.1.2.1.1. Send message B to R/3
2.2.1.2.2. Branch otherwise
2.2.1.2.2.1. Transform message B to errorMessage
2.2.1.2.2.2. Send errorMessage to R/3
Best regards,
Daniel

Continue without error

Why does the following query runs even after error in each loop ?
declare @i int
set @i = 100
declare @sql varchar(255)
while @i > 0
begin
set @sql = 'select * from faketable'
exec(@sql)
print @i
set @i = @i - 1;
end

exec(@sql)
if @@error>0 break
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

BDC - continue after error

Similar Messages

Maybe you are looking for