BDC for appending data for t-code FK02

Hi,
I want to append data for t-code FK02 through BDC.
Like if for particular lifnr and bukrs, there is existing 2 line items
then my BDC should starting appending data from 3rd line item.
Thanks

first u count line item
select count(*) into cnt
           from LFBW as a
           where a~lifnr = itab-lifnr
             and a~bukrs = itab-bukrs.
then put logic for
if cnt > '06'.
        tme = cnt / 6.
        cnt = cnt mod 6.
        do tme times.
            perform bdc_dynpro using 'SAPMF02K' '0610'.
            perform bdc_field using 'BDC_CURSOR' 'LFBW-QSREC(01)'.
            perform bdc_field using 'BDC_OKCODE' 'P+'.
        enddo.
    endif.

Similar Messages

The table for storing data for infocube and ODS

Hi all:
could you please tell me how to find the table for storing data for infocube and ODS?
thank you very much!

Hi Jingying Sony,
To find tables for any infoprvider go to SE11.
In database table field enter the following
Cube -
Has fact table and dimension table
For customized cube - ie cube names not starting with ' 0 '
Uncompressed Fact table - /BIC/F<infocubename>
Compressed fact table - /BIC/E<infocubename>
Dimension table - /BIC/D<infocubename>
For standard cube - ie cube names starting with ' 0 '
Uncompressed Fact table - /BI0/F<infocubename>
Compressed fact table - /BI0/E<infocubename>
Dimension table - /BI0/D<infocubename>
Click on display.
For DSO,
For standard DSO active table- /BI0/A<DSO name>00.
You use 40 for new table.
Click on display.
For customized DSO use- /BIC/A<DSO name>00.
An easier way is in the database table field, write the name of the cube/DSO preceeded and followed by ' * ' sign. Then press F4 . It shall give you the names of the available table for that info provider.
Double click on the name and choose display.
Hope this helps,
Best regards,
Sunmit.

How to find where the code for append structures for LIS extractors?

Hi,
I found 4 append structures for extractor 2LIS_03_BF,
Out of 4 append structures, I found code for one, using where-used option. But in vain for other 3. Is it possible they didn't transport the code for remaining structures? how to find that?
Cheers,
Kannan N

Kannan,
When ever you apply a logic to populate tdata for the appended filed then you will be writing some code in CMOD transaction code where you will find a ZXRSAU01
program, just double click on that then it will take you to the complete exit. Ther you can find with your data source name.
Hope it helps...
****Assign Points if it helps******
Gattu

BDC Program for Uploading Data for Property Tree in cg02

Hi,
How to upload data for property tree ( standard Properties ) of CG02. I checked for BAPI or Function Module but most them supports for specification header and sub item.
Please Let me know if any function module or BAPI available for this process. I tried with BDC Program, but it fails.
Regards,
Rajesh Kumar Murugesan

Hallo Rajesh
take a look here:
http://help.sap.com/erp2005_ehp_06/helpdata/en/c1/eda0f591ec12408b25e7a1b369ca45/frameset.htm
Chapter "Import and Export".
1.) Reads cross these further chapters:
"Tools (EHS-BD-TLS)" => "IMport and Export" => "Import: Process" => "Specifying the Sequence of the External Data Structure " => "External File Structure: Specification"
Here you will learn how to prepare the data. In chapter:" Example: Transfer File for Specifications" you will find an example of an file whcih could be used to upload data in the property tree
2.) Chapter:" Importing Specifications" is explaining the steps whcih are need to populate the property with data using the file as prepared; read cross chapter "Specification Import Control"
I hope this helps.
C.B.
Edited by: Christoph Bergemann on Feb 4, 2012 6:59 PM
Edited by: Christoph Bergemann on Feb 4, 2012 6:59 PM

How to read channel for channel and appended data for appended data?

Good day,
I wrote a little program that saves blocks of data after a trigger to a
file, it will append these blocks off data as much times as you set it.
Each appended data block has a time stamp and a signal path and burst
number as a header.
I use the storage way to save it to TDM format. This all seems to work nicelly.
Now is my question:
Afterwards i want to read each block or burst seperatelly. How can I do
this. I can't seem to find an easy way to read just one data block in
the file.
best regards
Joost van Heijenoort
Ursa Minor Space and Navigation

allready found out that I have to save it in unique channel names...
this helps..
best regards
Joost

Try to use dynamic sql connection for additioal data for xml publisher

I understand that the xml publisher is using template to merger the xml data output (say from Oracle report).
We have some Oracle seeded report and do not wish to modify these report, but we do need to add additional data to these reports. In the past, the tool we used has the capability to make dynamic sql calls to get these additional data. Can this be achieved in xml publisher?
I did noticed that the template builder has two options for upload data source: from a data file or from a sql connection, but seems they can not be used together. Not much document I can find for this. Thank you in advance for your help.
Frank

Hi All,
Sandeep: if u have the solution pls send to my email id [email protected]
ill really appriciate u r response.
I have the same requirement to develop AR Invoice Report in XML publisher, actually it was developed using Optio Layout.my issue is the actual AR Invoice RDF contains 20 records and it showing the 20 recodes when we run that program (concurrent program output) after that while printing this report uisng the OPTIO layout (The Optio system is fetching some more records (10 records)) it printing total 30 records. i mean here the OPTIO is handling some pl/sql code i guess..
so now how we can handle this requirement using XMLP.I am using RTF Templates with 5.6.2 v. Is it possible to do the same manner how the OPTIO was doing. Is this possible with any other Templates ?. or we need to customize the RDF itself ? .but I know that I can go ahead and modify the existing out-of-the-box report, but I do not want to do that. I do not have control over the XML that is generated since the XML is generated when the report is run. Is there any way to retrieve the extra information AFTER the xml has been generated and BEFORE the template is applied ?
Thanks,
Rad

How to retrieve DELTA for Particular date for FIGL(ECC) into BI

Hi,
Model of this ODS is in BW3.5. (DS --> ODS --> Infocube)
My loads are daily from 0FI_GL_4 (line Items) into ODS. There was from error in the load, so I deleted the request (manage & and made QM status RED in monitor also) from ODS and also from PSA for a particular date(xx.xx.xxxx).
Now I tried loading the Infopackage, but the data is not coming for that date (xx.xx.xxxx) into ODS.
I have set to DELTA REPEAT in RSA7(ECC) , but after saving, it is again coming back to DELTA UPDATE.
All the Previous and Next day load was fine,but i did not get the data for xx.xx.xxxx.
In Selection screen for DS and Infopackage does not have 0CALDAY or 0PSTNG_DATE.
Can you please help me out in telling how to get the data for that particular date (xx.xx.xxxx) into BI.
DOES REPAIR FULL REQUEST SOLVE MY PROBLEM?
Full Points will be assigned.
Regards,
Bindu.

Hi Viren,
Initially I have tried what you have said, but ERROR is coming as AS YOUR PREVIOUS DELTA IS INCORRECT, YOU CANNOT LOAD THIS DELTA. I am not getting any option of REPEAT DELTA.
"I have set to DELTA REPEAT in RSA7(ECC) , but after saving, it is again coming back to DELTA UPDATE."
As I am not getting REPEAT DELTA, to get that I tried saving the 0FI_GL_4 as DELTA REPEAT in RSA7 (ECC).
Please let me know any more information required.
Thanks,
Bindu.

Query for Separate data for each VU user in OLT testing

Hi,
I am not able to configure separate set of data for each VU users in OLT testing to avoid concurrency.Is there a way out in OATs?
Regards,
Yogesh
Edited by: user10313659 on Jan 8, 2012 10:52 PM

Hi Yogesh,
It is not really practical to use a separate databank per virtual user (assuming this is what you were referring to). You can use a databank that contains enough records for all users and then use the databank control to make sure that each user gets a separate record for each iteration - check out the 'Sequential/Stop the User' settings or use 'Shuffle'.
Regards,
Jamie

Query for getting data for every quarter for financial year

Hi,
My problem is I need to get the data for every quarter for financial year and also I need data for every week for financial year.
For example for financial year 2012-13, Apr2012 to Jun2012 would be Q1, Jul2012 to Sep2012 would be Q2 and so on. Total 8quarters should come upto Apr2013.
In the same way 1st apr 2012 to 7th apr 2012 would be week1, 8th apr to 15th apr would be week2 and son on. How to write a query for this scenario in oracle. Can anybody help me on this. very urgent..
Thanks in advance.

lakmesri wrote:
Hi,
My problem is I need to get the data for every quarter for financial year and also I need data for every week for financial year.
For example for financial year 2012-13, Apr2012 to Jun2012 would be Q1, Jul2012 to Sep2012 would be Q2 and so on. Total 8quarters should come upto Apr2013.
In the same way 1st apr 2012 to 7th apr 2012 would be week1, 8th apr to 15th apr would be week2 and son on. How to write a query for this scenario in oracle. Can anybody help me on this. very urgent..
Thanks in advance.
How can you get 8 quarters within a year ? I'b be concerned here.
lakmesri wrote:
Hi,
In the same way 1st apr 2012 to 7th apr 2012 would be week1, 8th apr to 15th apr would be week2 and son on. How to write a query for this scenario in oracle. Can anybody help me on this. very urgent..
Thanks in advance.
First, that question is really not clearly asked. Second how could it be urgent ? You even did not tell us your Oracle version, did not show any tables descr, output sample nor any effort on your side to work on.
Nicolas.

User exit for save data in T.code PA40 ABAP-HR

Hi Expart,
what is the user exit which is trigger when we save the data through pa40 transaction which check the latest update in the database.
Kindly give me exit name .

Hi Vikash ,
Please refer to below Exits :
HRPBAS01            User Exit for HR Master Data
HRPC0001            HR: PC download authorization
HRRPAI01            User exit for FB HR_ENTRY_DATE and HR_LEAVING_DATE
PARA0001            Enhancement for Determining the Number of Periods
PARA0002            Enhancement for Calculating Annual Salary; IT0008,14,15
PBAS0001            PA: Pers.Admin./Recruitment: Default values and checks
PBAS0002            PA: Enhancements for Personnel Administration - Menu
PBASRP01            PA: User exit distributed reporting
Hope this will help you.
Regards,
Nikhil

Best practice for handling data for a large number of indicators

I'm looking for suggestions or recommendations for how to best handle a UI with a "large" number of indicators. By large I mean enough to make the block diagram quite large and ugly after the data processing for each indicator is added. The data must be "unpacked" and then decoded, e.g., booleans, offset binary bit fields, etc. The indicators are updated once/sec. I am leanding towards a method that worked well for me previously, that is, binding network shared variables to each indicator, then using several sub-vis to process the particular piece of data and write to the appropriate variables.
I was curious what others have done in similar circumstances.
Bill
“A child of five could understand this. Send someone to fetch a child of five.”
― Groucho Marx
Solved!
Go to Solution.

I can certainly feel your pain.
Note that's really what is going on in that png You can see the Action Engine responsible for updating the display to the far right.
In my own defence: the FP concept was presented to the client's customer before they had a person familliar with LabVIEW identified. So I worked it this way from no choice of mine. I knew it would get ugly before I walked in the door and chose to meet the challenge head on anyway. Defer Panel Updates was my very good friend. The sensors these objects represent were constrained to pass info via a single ZigBee network so I had the benefit of fairly low data rates as well but even changing view (Yes there is a display mode that swaps what information is displayed for each sensor) was updated fast enough that the user still got a responsive GUI.
(the GUI did scale poorly though! That is a lot of wires! I was greateful to Jack for the Idea to make align and distribute work on wires)
Jeff

Restricting unassigned employee in cats for filling data for projects

hi every one in my project i m facing a problem where i have to configure cats and ps in such a way that only assigned employees (IN PS,WORKFORCE PLANNING) to a network should be allowed to fill entry for that particular network. If we are assigning employees in work center thru HRMS than there must b some link that only assigned employees should be able to fill the hours for that particular network
Thanks in advance , any information will be of gr8 help

Hi virendra in case of your problem u can do one thing in your data entry profile select the worklist option in that select work center and project management. Now in field control choose display option for networks. so now when ever your employee will select some network from work list he/she can only copy from the worklist and cant modify and cant enter any other project which is not assigned. I hope this will fulfill your requirement.
Regards
Abhishek Sinha
IDHASOFT, INDIA

Problem in finding the datasources for master data for 0TCT_MC11

Hi,
I want to load the data in 0TCT_MC11(BI7) , which is one of the technical content multiprovider. I have a datasource to load data in it , but I am not able to find the data source for the master data objects. hence I am stopped in doing loading to this MP. Can some body let me know where can I get the Information about the Datasources to load master data.
Thanks,
Jeetu

Hi Srilatha,
While reading data from 0TCT_MC11 through query I am getting the following message...(query name 0TCT_MC11_Q0130)
"Error while reading data; navigation is possible
"Value XY2CLNT400AHPL_ACCT"
"You are trying to load the invalid characteristic value 1. (hexidecimal representation 0044004200320043004C004E00540036003000300049004F00)."
Please let me know if you have any suggestions for this.
Thanks, Jeetu

Design ideas for retrieving Data for Read Only

Hi All,
Currently I am in the process of evaluating different design ideas for the search functionality of my application. I am looking for a best option for retrieving the data by executing some complex sql queries with huge query criteria and showing the single or multiple records to the user. But the data is read only. This may involve pagination if the number of records exceeds the page limit.
There are various options to implement this like JDBC and JDO or using some persistance framework to retrieve the data objects. Please suggest me about a good option for this.
Thanks in Advance
Durga

Currently I am in the process of evaluating different
design ideas for the search functionality of my
application. I am looking for a best option for
retrieving the data by executing some complex sql
queries with huge query criteria and showing the
single or multiple records to the user. But the data
is read only. This may involve pagination if the
number of records exceeds the page limit. This can typically be handled with a Fast Reader, though this is a coding ideom rather than a true design pattern.
http://java.sun.com/blueprints/patterns/FastLaneReader.html
Please suggest me about a
good option for this.Apache Lucene is worth considering,
http://lucene.apache.org/java/docs/

User Exit for Validity Date for VA41 Tcode

Hi,
I am giving order type in VA41 Tcode and then Clicking on 'Create with Reference' .Then a Pop Up is getting generated. In this i am giving Contract created with validity date lessthan today's date(in Contract Tab).For Example i created a Contract xxxxxx with 'valid to' 9.12.2008. When I am giving this contract and clicking on 'Copy' button a Warning message is getting generated 'The sales document is only valid until 09.12.2008'. Now i have to change this into Error message instead of Warning Message.
i used User Exits mv45afzz,MV45AFZA,MV45AFZB. But the debugger is getting started only after Warning message got generated.Is there any User Exit for which debugger gets started when i give the Contract and then Click on 'Copy' button. Please Suggest.
Thanks and Regards
K Srinivas

Hi,
One idea. Go to VTAA (copy between sales docs) and create a new VOFM where you manage the copy control. Set a warning/error message in the new VOFM (in your range number), and try it.
Regards,
Eduardo
Edited by: Eduardo Hinojosa on Dec 10, 2008 3:58 PM

BDC for appending data for t-code FK02

Similar Messages

Maybe you are looking for