How to read channel for channel and appended data for appended data?
Good day,
I wrote a little program that saves blocks of data after a trigger to a
file, it will append these blocks off data as much times as you set it.
Each appended data block has a time stamp and a signal path and burst
number as a header.
I use the storage way to save it to TDM format. This all seems to work nicelly.
Now is my question:
Afterwards i want to read each block or burst seperatelly. How can I do
this. I can't seem to find an easy way to read just one data block in
the file.
best regards
Joost van Heijenoort
Ursa Minor Space and Navigation
allready found out that I have to save it in unique channel names...
this helps..
best regards
Joost
Similar Messages
-
How to read in a file and change the column attributes
Hi,
I'm new to java and i'm stuggling to find a way to read in a text file and perform calculations on the data, such as to normalise it.
What in want to do is normalise the data by finding the greatest value in a column and then divide all the other values in the column with that value.
I know how to read a file in and store each line in a vector but for this problem i think i need to store each column in an array, but i'm not sure how to do this.
Can anyone help please?
ThanksHi,
I'm new to java and i'm stuggling to find a way to
read in a text file and perform calculations on the
data, such as to normalise it.
What in want to do is normalise the data by finding
the greatest value in a column and then divide all
the other values in the column with that value.
I know how to read a file in and store each line in a
vector but for this problem i think i need to store
each column in an array, but i'm not sure how to do
this.
Can anyone help please?
ThanksI think this should work but I wrote it out without completely thinking about it (hopefully to get things started).
So if you had this:
age height earnings
0 2 100
1 3 50
2 1 0
For the age column you'd take 2 as the largest and then divide 0 and 1 by two to get 0, .5.
First build up test files that seperate the columns in different ways. With spaces, tabs, and the ASCI Control character for null ( I think it's 0 ). Your program should detect
numbers and spaces, tabs control character, commas and periods (for money). Because numbers don't have spaces it should be easy to keep track of which column
you're in.
Store each line into a 3D String array with each index containing a String built up from the chars scanned in on each line, when a blank area is found followed by another
number iterate the column index. When you come to the end of the line set column == 0 and row+1.
private String[][][] test = new String[2][6][1];
20 3 11 14 44 0
4 5 7 80 91 49
test[0][0][0] would be row 1 col 1 value 1 ((20))
test[0][1][0] would be r1, c2, v1 ((3))
test[1][0][0] would be r2, c1, v1 ((4))
test[1][2][0] would be r2, c3, v1 ((7))
test[1][5][0] would be r2, c6, v1 ((49))
package source.Final;
import javax.swing.*;
import java.io.*;
public class S7
public static void main(String[] args)
getContents();
System.exit(0);
public static void getContents()
String lineSep = System.getProperty("line.separator");
char c = ' ';
int iterator = 0;
int i = 0;
int charNum = 1;
int lineCount = 1;
//declared here only to make visible to finally clause
BufferedReader input = null;
BufferedWriter out = null;
try {
String line = null;
* This implementation reads / writes one line at a time
* using the buffered reader / writer Java classes.
input = new BufferedReader( new FileReader( "C:\\Scan file test\\Read\\test1.txt" ));
out = new BufferedWriter( new FileWriter( "C:\\Scan file test\\Read\\test2.txt" ));
//input = new BufferedReader( new FileReader( "C:\\Scan file test\\Read\\booked_policies1.txt" ));
//out = new BufferedWriter( new FileWriter( "C:\\Scan file test\\Write\\booked_policies1.txt" ));
//input = new BufferedReader( new FileReader( "C:\\Scan file test\\Read\\booked_policies2.txt" ));
//out = new BufferedWriter( new FileWriter( "C:\\Scan file test\\Write\\booked_policies2.txt" ));
//input = new BufferedReader( new FileReader( "C:\\Scan file test\\Read\\booked_policies3.txt" ));
//out = new BufferedWriter( new FileWriter( "C:\\Scan file test\\Write\\booked_policies3.txt" ));
out.write( "Character\tLine Number\tCharacter Number\tAscii Value" + lineSep );
while (( line = input.readLine()) != null)
i = 0;
charNum = 1;
iterator = 0;
while( i < line.length() )
c = line.charAt(iterator);
if( (int)c == 0 || (int)c == 9 )
break;
else if( c >= '[' && c <= '_')
{out.write( "["+c+"]\t\t"+"["+lineCount+"]\t\t"+"["+charNum+"]\t\t\t"+"["+(int)(c)+"]"+lineSep );}
else if( c < ' ' )// && (int)c != 0 && (int)c != 9 )
{out.write( "["+c+"]\t\t"+"["+lineCount+"]\t\t"+"["+charNum+"]\t\t\t"+"["+(int)(c)+"]"+lineSep );}
else if( c > ';' && c <= '@' && c != '=')
{out.write( "["+c+"]\t\t"+"["+lineCount+"]\t\t"+"["+charNum+"]\t\t\t"+"["+(int)(c)+"]"+lineSep );}
else if( c >= '!' && c < '"' )
{out.write( "["+c+"]\t\t"+"["+lineCount+"]\t\t"+"["+charNum+"]\t\t\t"+"["+(int)(c)+"]"+lineSep );}
else if( c > 'z' && c < '~' )
{out.write( "["+c+"]\t\t"+"["+lineCount+"]\t\t"+"["+charNum+"]\t\t\t"+"["+(int)(c)+"]"+lineSep );}
else if( c == '%' )
{out.write( "["+c+"]\t\t"+"["+lineCount+"]\t\t"+"["+charNum+"]\t\t\t"+"["+(int)(c)+"]"+lineSep );}
else if( c > '~' )
{out.write( "["+c+"]\t\t"+"["+lineCount+"]\t\t"+"["+charNum+"]\t\t\t"+"["+(int)(c)+"]"+lineSep );}
charNum += 1;
iterator += 1;
i++;
lineCount += 1;
catch (FileNotFoundException ex) {ex.printStackTrace(); System.out.println("File not found.");}
catch (IOException ex){ex.printStackTrace(); System.out.println("IO Error.");}
finally{ try{ if( input != null ) input.close(); if( out != null ) out.close();}
catch (IOException ex){ex.printStackTrace(); System.out.println("IO Error #2.");}
} -
How to find function module's and tables used for the particulat screen or TCODE?
Hello Nation,
I would like to know how to find the function modules and tables used for the particular screen or TCODE or program.
Example : I would like know the function module used in the program RDBGFT?
How can i find that?
Thanks in advance ,Awaiting your reply.Make use of Find function with the keyword "CALL FUNCTION".
Make use of the same find function with the keyword "Select" to know the database tables used.
Regards,
Philip. -
My itunes can not upgrade. it is looking for athe Itunes.MSI file, but it is unable to find it on the C:drive. How do I correct the error, and reinstall Itune for my Iphone, Ipad and Ipod?
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I've deleted all my emails and texts to make room for the 7.1 upgrade but my usage still says I'm using 641MB for mail and 364 MB for messages. Anyone know how to free up this memory? I have a 16 GB model. Thank you.
How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
How to Remove “Other” Data from iPhone, iPad and iPod Touch
http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
What is “Other” and What Can I Do About It?
https://discussions.apple.com/docs/DOC-5142
iPhone or iPad Ran Out of Storage Space? Here’s How to Make Space Available Quickly
http://osxdaily.com/2012/06/02/iphone-ipad-ran-out-of-available-storage-space-ho w-to-fix-quick/
6 Tips to Free Up Tons of Storage Space on iPad, iPhone, and iPod Touch
http://osxdaily.com/2012/04/24/6-tips-free-up-storage-space-ipad-iphone-ipod-tou ch/
Also,
How to Clear Message/iMessage Cache on iPhone & iPad And Reclaim Lots of Free Space
http://www.igeeksblog.com/how-to-clear-message-imessage-cache-on-iphone-ipad/
Cheers, Tom -
installing microsoft office for mac and getting prompt for installer password. i have put in apple id password and admin password and not working, i have also reset my admin password 3 times and it is still not working? how do i get past this?
You don't use your Apple ID or its password to install anything on your Mac. You use the admin account's name and password.
Use the name and password you last entered when resetting them. The "name" you use is not the short name of the admin account folder.
For example. If you create an admin account of John Smith, the short name given to that account's folder will be johnsmith. So when an app requests an admin name and password to install something, the admin name you enter is John Smith, not johnsmith. -
I have 2 ipods,one for music and the other for old time radio shows.Each had their own file.My computer crashed and I had to buy a new one.Now both ipod files are merged into one.How do I seperate them on the computer?
Hi Craig
Unfortunately, in your case, there isn't really a way to separate them as far as I can think.
You could try restoring from a backup, and choosing an older backup perhaps
Cheers -
How to get LASTDAY for each and every month between given dates..
Hi Friend,
I have a doubt,How to get LASTDAY for each and every month between given dates..
for ex:
My Input will be look like this
from date = 12-01-2011
To date = 14-04-2011
And i need an output like
31-01-2011
28-02-2011
31-03-2011
is there any way to achieve through sql query in oracle
Advance thanks for all helping friendsHere's a 8i solution :
select add_months(
trunc(
to_date('12-01-2011','DD-MM-YYYY')
,'MM'
, rownum ) - 1 as results
from all_objects
where rownum <= ( months_between( trunc(to_date('14-04-2011','DD-MM-YYYY'), 'MM'),
trunc(to_date('12-01-2011','DD-MM-YYYY'), 'MM') ) );
The above two query is worked in oracle 11GActually the first query I posted is not correct.
It should work better with
months_between(
trunc(to_date(:dt_end,'DD-MM-YYYY'),'MM'),
trunc(to_date(:dt_start,'DD-MM-YYYY'),'MM')
)Edited by: odie_63 on 12 janv. 2011 13:53
Edited by: odie_63 on 12 janv. 2011 14:11 -
How to use the selection profile and status profile for production order?
Hi expert,
I want to know how to use the selection profile and status profile for production order. what's the usage for these two selection profile and status profile ?
Please help me.
thanks in advance.
george.shiHi George,
There are are two types of statuses.One is system status and second one is user status.These statuses will tell us current situation of an order.
We can't change system statuses.But we can create our own statuses through status profile.With this profile we can control user statuses.
In this status profile,
1.We define the sequence in which user statuses can be activated,
2.We define initial statuses
3. Allow or prohibit certain business transactions.
Selection profiles are used to select the objects (say production orders) with different status combinations.We assign status profiles to selection profiles in BS42 T-Code.
Regards,
Raja.
Edited by: Rajarao on Oct 30, 2008 6:21 AM
Edited by: Rajarao on Oct 30, 2008 6:22 AM -
Does anyone know how to get the vendor ID and product ID for NI-Visa? TIA
Does anyone know how to get the vendor ID and product ID for NI-Visa? TIA
This question has already been addressed in this thread:
Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa?
John M
National Instruments -
Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa? TIA
Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa? TIA
Hello,
Exactly which USB device are you referring to? Is the device a NI product?
The Product ID for National Instruments DAQPad-6020E is 0x12C0. The USB vendor ID is 0x3923. This is a 16-bit hexadecimal number(1093) (that is decimal 4243).
Also, here's a document on our website that will help you in configuring NI-VISA to control your USB device:
http://zone.ni.com/devzone/conceptd.nsf/webmain/6792BAB18242082786256DD7006B6416?opendocument
Swapnil P.
National Instruments Engineer -
my older iPod my husband wants to use and his netbook does not have cd drive. How do I down load iPod and iTunes info for this product so he can now use it?
Your question(s) is/are a little hard to understand. So your husband has an iPod as well as a netbook and he wants to be able to sync iPod with this netbook is that correct? If so, he'll need to first download and install iTunes assuming the netbook is running some version of Windows such as 7, Vista, or XP.
http://www.apple.com/itunes/download/
As for importing or ripping music, he'll have to either use an external CD/DVD drive that is attached via USB or rip the songs to another PC you have with a built in CD/DVD drive. Once you have imported them to the other computer, you can transfer the songs to an external hard drive or to his iTunes library via Home Sharing.
If this isn't quite what you were looking for, please clarify.
B-rock -
How to find out the plants and storage location for a given company code
hi
How to find out the plants and storage location for a given company codeHi
Check for Assignem,ent of Plant & compnay code in OX18
& for Combination of Plant & Storage location in OX09
The total org structure can be viewed in EC01 - Click on Structure -> navigation
& Continue, Click on the Compnay code & the wole structure can be viewed
Thanks & Regards
Kishore -
I had an App on MacBook Air which would cause my computer to be locked. I delted it and reinstalled the App again from the AppStore. Now I am being charged again for the same App. How can I correct this issue and get refund for the double billing?
You can't gift it, gifting can only be done from within the store, not from within your library.
Puchases are considered final but you can try the 'report a problem' link to contact iTunes Support and see if they will refund or credit you : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
I removed SkyDrive for Business and installed OneDrive for Business on my laptop. After that, I had problems opening a Word and Excel document in a SharePoint site (SP2013). After installing Service Pack2 from Office2010, this problem is solved.
But I still have the same problem with InfoPath. Whenever I click an InfoPath form (I have InfoPath 2010 on my laptop),...
... I get the error "cannot display web page".
When I change the URL
ms-infopath:ofe|u|http://intranet.water-link.be/samenwerken/awwit/Autorisaties/Gebruikersbeheer/2015-02-25%20Aanvraag%20gebruikersbeheer%20voor%20Stephanie%20Geeraerts.xml
into
http://intranet.water-link.be/samenwerken/awwit/Autorisaties/Gebruikersbeheer/2015-02-25%20Aanvraag%20gebruikersbeheer%20voor%20Stephanie%20Geeraerts.xml
I can open the InfoPath form and read it.
Any ideas about how to fix this ? I already tried to restore the Office 2010 via Control Panel - Install Programs but without any success...Hi Gert,
As I understand, you can’t open InfoPath form in SharePoint 2013 unless you change the URL without “ms-infopath:ofe|u|”.
There are some reasons which maybe cause this issue, and you can try to do things below:
Access CA -> General Application Settings -> Configure InfoPath Form Service -> Check the two options in User Browser-enabled Form Templates.
Go into the registry by typing regedit from the Run line and rename the SharePoint.OpenDocuments.5 key (ex. SharePoint.OpenDocuments.5.old) under HKEY_CLASSES_ROOT.
In library settings, click "relink documents to this library".
Here are some similar posts for your reference:
http://blogs.technet.com/b/office_integration__sharepoint/archive/2014/02/24/quot-the-webpage-cannot-be-displayed-quot-when-trying-to-open-edit-an-office-file-from-a-sharepoint-2013-site.aspx
http://www.infopathdev.com/forums/t/28998.aspx
Thanks,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Switch Sign For Flow and Switch Type for Flow
Hi Can any one Please make me clear at least with 3 examples how to understand Switch Sign for Flow and Switch Type for Flow
and also the good example with Balance Recurring Account TypesHi Chennai,
Consider an account "Fixed-Assets" supported by movement analysis in Custom1, as follows:
ClosingBalance
OpeningBalance
Additions
Disposals
If you mark the Custom1 member Disposals as SwitchSignForFlow, you will enter positive values in Disposals but HFM will subtract from the other two members to calculate the Closing Balance. You may use this functionality if your client prefers to see all values as positive on the reports.
Using the same example, you might recognize that while Closing and Opening balances are of balance type (they provide a snapshot of the account at a specific instant meaning that you see the same number whether you view the YTD or Periodic values of the account), Additions and Disposals are movements, which means that they accumulate during the same year starting from a zero balance on 1/1/201X and therefore you will see different numbers depending on viewing the YTD or Periodic values of the account. In order to provide with this behavior you have to mark both Additions and Disposals with SwitchTypeForFlow. If you don't they will behave as the underlying account (the Fixed-Assets account) and like the other two Custom1 members, Opening and Closing balance members.
As for the BalanceReccuring, an account of this type behaves like a normal Balance account, but once you input a number in an intermediate period (say June), the same number will be copied to all following periods (July-December) until you override the numbers by explicitly inputting new values. With a normal balance account, all following periods will be empty.
--Kostas
Maybe you are looking for
-
Manage users and privleges is missing in security tab in rep admin 9.5
hi not able to see Manage users and privleges in security tab in rep admin is manage users and privleges in infa 9.5 is shifted to admin console or is it available with both the tools admin console.
-
Dear all, Can we create the PO in FI? By the thing is client which is series org. didn't implemented MM. thet want issue the PO through FI to buy anything. is it possible? If it's posible, plz tell me the procedure. Thanks in advance, Regards sriniv
-
Composing the URL to call a report to render in the Excel format - SSRS 2012
Hi, I've a report that I need to call by an URL. I've composed this link, using the rs:Format=EXCEL command, but I've an error because the max number of rows is 65.536 for the current version of Excel and the extracted data are more of 150.000 rows.
-
Update the stastics of tables BKPF and GLFUNCA
Hello All, update the stastics of tables BKPF and GLFUNCA not updataing I have execute via Brtools 7 - Database statistics >> 1 = Update database statistics >> 9 ~ Tables for update (table) ......... [BKPF] same for table GLFUNCA 7 - Database sta
-
Setting VO bind variable using session variable
Hi, I need to get/set VO bind variable using ApplicationModuleImple or ViewObjectImple class. Does Any one know how to do it? I have one VO based on query like "select name from users where password = :password ". I had a bind variable to it too. now