BDC for file selection

hi,
I want to record the file selection using BDC. but the dialog box which is for the file selection is also getting displayed while running the BDC program. is it possible that i pass a file name to it without the file dialog box.
Thanks in advance.
Regards,
Aparna.

Hi Raja,
I think there is some problem with rewarding points. Even if the post is marked as question, the option for rewarding points is not visible. I too did not receive some points because of this.
I think we should inform this to SDN.
Thanks
Vinod

Similar Messages

Field for file selection

In Acrobat Text Fields have an option Field is used for file selection. With this Text Fields it is possible to select a File in the File Browser and to show the URL of the selected File in the Textfile with a script like var ft = this.getField("URL"); ft.browseForFileToSubmit(). Has someone found a similar possibility in Designer?

getField does not work on XFA forms. Please have a look at the following document:
http://www.adobe.com/devnet/livecycle/articles/AcroJS_DesignerJS.pdf

Issue with MB25 BDC for Dynamic Selection Screen

Hi Experts,
I recorded one BDC for MB25 Tcode regarding to determine Open Reservation(s) in E Mode (Display Mode). I am passing 3 parameters.
1. Plant,
2. Requirement Date
3. Multiple Reservation Numbers i.e. RSNUM from Dynamic Selection i.e. 2nd Button -> Header Data for Reservation -> Reservation -> Multiple Selection Icon.
But while executing that BDC, I need to manually click every time on 'Header Data for Reservation' Tree and then Multiple Selection for Reservation Icon.
I want below steps automatically while executing:
- Open 'Header Data for Reservation' Tree
- Click Reservation
- Open Popup for 'Multiple Selection'.
So no need to click every time on Dynamic Selection Screen i.e. Header Data for Reservation -> Reservation -> Multiple Selection Icon.
Please find attached screen shot for your reference.
Please guide.
Thanks and Regards,
Emon Master

Hello Jainam,
submit (sy-repid) with selection-table v_sp
with free selections EXPRESSIONS
via selection-screen.
Without going through the details, dont you think this will cause an inifinite loop as the calling & the called programs are the same.
Please enlighten me !!
BR,
Suhas

BDC for row selection

Hi all
I must do selection on some row from ALV by BDC or something like this.
Is it possible to do it ?
Edited by: Kosmo on Jul 20, 2011 10:34 AM

Sorry.. you are right.. The table maintenance view was Table control . I thought you were only asking if row selection was possible. I din notice you were specifically asking for ALV. ALV records marking do not seem to be possible while recording. what is your exact requirement. We could probably find an alternate solution.

How to do popup for file download???

Hi,
I'm trying to create a popup for file selection for download. Basically, I want to call:
call method cl_gui_frontend_services=>file_open_dialog
This works fine from a report, but from my web dynpro I get a dump because apparently there is no gui (parameters www_active and activeX are all empty).
Does anybody have any experience with this? I'm thinking:
- am I doing something wrong?
- does this method work with web dynpro at all?
- is there some other CL_WD* class for this purpose?
- are my system settings screwed up?
Thanks for all hints!
Ira

This might be helpful:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/42af9f90-0201-0010-6099-ba67e5426bdf
- April King

BDC for ME21N (Flat file format)

Hello,
I have to write a BDC for ME21N(stock transfer).... Someone pls give me the format of flat file... we need separate files for header and items or only one file is enough??? pls someone send me the format and code......
my email id is [email protected]
Thanks in advance...
Regards,
Maya.

Hi
see this and do accordingly
REPORT zmm_bdcp_purchaseorderkb02
NO STANDARD PAGE HEADING LINE-SIZE 255.
Declaring internal tables *
*-----Declaring line structure
DATA : BEGIN OF it_dummy OCCURS 0,
dummy(255) TYPE c,
END OF it_dummy.
*-----Internal table for line items
DATA : BEGIN OF it_idata OCCURS 0,
ematn(18), "Material Number.
menge(13), "Qyantity.
netpr(11), "Net Price.
werks(4), "Plant.
ebelp(5), "Item Number.
END OF it_idata.
*-----Deep structure for header data and line items
DATA : BEGIN OF it_me21 OCCURS 0,
lifnr(10), "Vendor A/c No.
bsart(4), "A/c Type.
bedat(8), "Date of creation of PO.
ekorg(4), "Purchasing Organisation.
ekgrp(3), "Purchasing Group.
x_data LIKE TABLE OF it_idata,
END OF it_me21.
DATA : x_idata LIKE LINE OF it_idata.
DATA : v_delimit VALUE ','.
DATA : v_indx(3) TYPE n.
DATA : v_fnam(30) TYPE c.
DATA : v_count TYPE n.
DATA : v_ne TYPE i.
DATA : v_ns TYPE i.
*include bdcrecx1.
INCLUDE zmm_incl_purchaseorderkb01.
Search help for file *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file.
START-OF-SELECTION.
To upload the data into line structure *
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = p_file
filetype = 'DAT'
TABLES
data_tab = it_dummy.
Processing the data from line structure to internal tables *
REFRESH:it_me21.
CLEAR :it_me21.
LOOP AT it_dummy.
IF it_dummy-dummy+0(01) = 'H'.
v_indx = v_indx + 1.
CLEAR it_idata.
REFRESH it_idata.
CLEAR it_me21-x_data.
REFRESH it_me21-x_data.
SHIFT it_dummy.
SPLIT it_dummy AT v_delimit INTO it_me21-lifnr
it_me21-bsart
it_me21-bedat
it_me21-ekorg
it_me21-ekgrp.
APPEND it_me21.
ELSEIF it_dummy-dummy+0(01) = 'L'.
SHIFT it_dummy.
SPLIT it_dummy AT v_delimit INTO it_idata-ematn
it_idata-menge
it_idata-netpr
it_idata-werks
it_idata-ebelp.
APPEND it_idata TO it_me21-x_data.
MODIFY it_me21 INDEX v_indx.
ENDIF.
ENDLOOP.
To open the group *
PERFORM open_group.
To populate the bdcdata table for header data *
LOOP AT it_me21.
v_count = v_count + 1.
REFRESH it_bdcdata.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0100',
' ' 'BDC_CURSOR' 'EKKO-LIFNR',
' ' 'BDC_OKCODE' '/00',
' ' 'EKKO-LIFNR' it_me21-lifnr,
' ' 'RM06E-BSART' it_me21-bsart,
' ' 'RM06E-BEDAT' it_me21-bedat,
' ' 'EKKO-EKORG' it_me21-ekorg,
' ' 'EKKO-EKGRP' it_me21-ekgrp,
' ' 'RM06E-LPEIN' 'T'.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0120',
' ' 'BDC_CURSOR' 'RM06E-EBELP',
' ' 'BDC_OKCODE' '/00'.
MOVE 1 TO v_indx.
*-----To populate the bdcdata table for line item data
LOOP AT it_me21-x_data INTO x_idata.
CONCATENATE 'EKPO-EMATN(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-ematn.
CONCATENATE 'EKPO-MENGE(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-menge.
CONCATENATE 'EKPO-NETPR(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-netpr.
CONCATENATE 'EKPO-WERKS(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-werks.
v_indx = v_indx + 1.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0120',
' ' 'BDC_CURSOR' 'RM06E-EBELP',
' ' 'BDC_OKCODE' '/00'.
ENDLOOP.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0120',
' ' 'BDC_CURSOR' 'RM06E-EBELP',
' ' 'BDC_OKCODE' '=BU'.
PERFORM bdc_transaction USING 'ME21'.
ENDLOOP.
PERFORM close_group.
End of selection event *
END-OF-SELECTION.
IF session NE 'X'.
*-----To display the successful records
WRITE :/10 text-001. "Sucess records
WRITE :/10 SY-ULINE(20).
SKIP.
IF it_sucess IS INITIAL.
WRITE :/ text-002.
ELSE.
WRITE :/ text-008, "Total number of Succesful records
35 v_ns.
SKIP.
WRITE:/ text-003, "Vendor Number
17 text-004, "Record number
30 text-005. "Message
ENDIF.
LOOP AT it_sucess.
WRITE:/4 it_sucess-lifnr,
17 it_sucess-tabix CENTERED,
30 it_sucess-sucess_rec.
ENDLOOP.
SKIP.
*-----To display the erroneous records
WRITE:/10 text-006. "Error Records
WRITE:/10 SY-ULINE(17).
SKIP.
IF it_error IS INITIAL.
WRITE:/ text-007. "No error records
ELSE.
WRITE:/ text-009, "Total number of erroneous records
35 v_ne.
SKIP.
WRITE:/ text-003, "Vendor Number
17 text-004, "Record number
30 text-005. "Message
ENDIF.
LOOP AT it_error.
WRITE:/4 it_error-lifnr,
17 it_error-tabix CENTERED,
30 it_error-error_rec.
ENDLOOP.
REFRESH it_sucess.
REFRESH it_error.
ENDIF.
CODE IN INCLUDE.
Include ZMM_INCL_PURCHASEORDERKB01
DATA: it_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
DATA: it_MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA: E_GROUP_OPENED.
*-----Internal table to store sucess records
DATA:BEGIN OF it_sucess OCCURS 0,
msgtyp(1) TYPE c,
lifnr LIKE ekko-lifnr,
tabix LIKE sy-tabix,
sucess_rec(125),
END OF it_sucess.
DATA: g_mess(125) type c.
*-----Internal table to store error records
DATA:BEGIN OF it_error OCCURS 0,
msgtyp(1) TYPE c,
lifnr LIKE ekko-lifnr,
tabix LIKE sy-tabix,
error_rec(125),
END OF it_error.
Selection screen
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS session RADIOBUTTON GROUP ctu. "create session
SELECTION-SCREEN COMMENT 3(20) text-s07 FOR FIELD session.
SELECTION-SCREEN POSITION 45.
PARAMETERS ctu RADIOBUTTON GROUP ctu. "call transaction
SELECTION-SCREEN COMMENT 48(20) text-s08 FOR FIELD ctu.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s01 FOR FIELD group.
SELECTION-SCREEN POSITION 25.
PARAMETERS group(12). "group name of session
SELECTION-SCREEN COMMENT 48(20) text-s05 FOR FIELD ctumode.
SELECTION-SCREEN POSITION 70.
PARAMETERS ctumode LIKE ctu_params-dismode DEFAULT 'N'.
"A: show all dynpros
"E: show dynpro on error only
"N: do not display dynpro
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 48(20) text-s06 FOR FIELD cupdate.
SELECTION-SCREEN POSITION 70.
PARAMETERS cupdate LIKE ctu_params-updmode DEFAULT 'L'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s03 FOR FIELD keep.
SELECTION-SCREEN POSITION 25.
PARAMETERS: keep AS CHECKBOX. "' ' = delete session if finished
"'X' = keep session if finished
SELECTION-SCREEN COMMENT 48(20) text-s09 FOR FIELD e_group.
SELECTION-SCREEN POSITION 70.
PARAMETERS e_group(12). "group name of error-session
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 51(17) text-s03 FOR FIELD e_keep.
SELECTION-SCREEN POSITION 70.
PARAMETERS: e_keep AS CHECKBOX. "' ' = delete session if finished
"'X' = keep session if finished
SELECTION-SCREEN END OF LINE.
PARAMETERS:p_file LIKE rlgrap-filename.
at selection screen *
AT SELECTION-SCREEN.
group and user must be filled for create session
IF SESSION = 'X' AND
GROUP = SPACE. "OR USER = SPACE.
MESSAGE E613(MS).
ENDIF.
create batchinput session *
FORM OPEN_GROUP.
IF SESSION = 'X'.
SKIP.
WRITE: /(20) 'Create group'(I01), GROUP.
SKIP.
*----open batchinput group
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = GROUP
USER = sy-uname.
WRITE:/(30) 'BDC_OPEN_GROUP'(I02),
(12) 'returncode:'(I05),
SY-SUBRC.
ENDIF.
ENDFORM. "OPEN_GROUP
end batchinput session *
FORM CLOSE_GROUP.
IF SESSION = 'X'.
*------close batchinput group
CALL FUNCTION 'BDC_CLOSE_GROUP'.
WRITE: /(30) 'BDC_CLOSE_GROUP'(I04),
(12) 'returncode:'(I05),
SY-SUBRC.
ELSE.
IF E_GROUP_OPENED = 'X'.
CALL FUNCTION 'BDC_CLOSE_GROUP'.
WRITE: /.
WRITE: /(30) 'Fehlermappe wurde erzeugt'(I06).
ENDIF.
ENDIF.
ENDFORM. "CLOSE_GROUP
Start new transaction according to parameters *
FORM BDC_TRANSACTION USING TCODE TYPE ANY.
DATA: L_SUBRC LIKE SY-SUBRC.
*------batch input session
IF SESSION = 'X'.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = TCODE
TABLES
DYNPROTAB = it_BDCDATA.
WRITE: / 'BDC_INSERT'(I03),
TCODE,
'returncode:'(I05),
SY-SUBRC,
'RECORD:',
SY-INDEX.
ELSE.
REFRESH it_MESSTAB.
CALL TRANSACTION TCODE USING it_BDCDATA
MODE CTUMODE
UPDATE CUPDATE
MESSAGES INTO it_MESSTAB.
L_SUBRC = SY-SUBRC.
WRITE: / 'CALL_TRANSACTION',
TCODE,
'returncode:'(I05),
L_SUBRC,
'RECORD:',
SY-INDEX.
ENDIF.
Message handling for Call Transaction *
perform subr_mess_hand using g_mess.
*-----Erzeugen fehlermappe
IF L_SUBRC <> 0 AND E_GROUP <> SPACE.
IF E_GROUP_OPENED = ' '.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = E_GROUP
USER = sy-uname
KEEP = E_KEEP.
E_GROUP_OPENED = 'X'.
ENDIF.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = TCODE
TABLES
DYNPROTAB = it_BDCDATA.
ENDIF.
REFRESH it_BDCDATA.
ENDFORM. "BDC_TRANSACTION
Form subr_bdc_table *
text
-->P_0220 text *
-->P_0221 text *
-->P_0222 text *
FORM subr_bdc_table USING VALUE(P_0220) TYPE ANY
VALUE(P_0221) TYPE ANY
VALUE(P_0222) TYPE ANY.
CLEAR it_bdcdata.
IF P_0220 = ' '.
CLEAR it_bdcdata.
it_bdcdata-fnam = P_0221.
it_bdcdata-fval = P_0222.
APPEND it_bdcdata.
ELSE.
it_bdcdata-dynbegin = P_0220.
it_bdcdata-program = P_0221.
it_bdcdata-dynpro = P_0222.
APPEND it_bdcdata.
ENDIF.
ENDFORM. " subr_bdc_table
Form subr_mess_hand *
text *
-->P_G_MESS text *
FORM subr_mess_hand USING P_G_MESS TYPE ANY.
LOOP AT IT_MESSTAB.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = it_messtab-msgid
LANG = it_messtab-msgspra
NO = it_messtab-msgnr
v1 = it_messtab-msgv1
v2 = it_messtab-msgv2
IMPORTING
MSG = P_G_MESS
EXCEPTIONS
OTHERS = 0.
CASE it_messtab-msgtyp.
when 'E'.
it_error-error_rec = P_G_MESS.
it_error-lifnr = it_me21-lifnr.
it_error-tabix = v_count.
APPEND IT_ERROR.
when 'S'.
it_sucess-sucess_rec = P_G_MESS.
it_sucess-lifnr = it_me21-lifnr.
it_sucess-tabix = v_count.
APPEND IT_SUCESS.
endcase.
ENDLOOP.
Describe table it_sucess lines v_ns.
Describe table it_error lines v_ne.
ENDFORM. " subr_mess_hand
Regards
Anji

When downloading a file, I select "Save File", but I'm unable to check the box label "Do this automatically for files like this from now on." The box is faded out. It's very tedious when you have to select "Save File" everytime

Click on the file to download
The "Open" Dialog Box pops up
Select "Save File"
Try to click on the box labeled ""Do this automatically for files like this from now on."
The box is disable

Hello melanie90, see : [https://support.mozilla.org/en-US/kb/change-firefox-behavior-when-open-file#w_changing-download-actions Changing download actions]
thank you

F4 help for file path in selection screen.

Hi there,
I defined one parameter p_path for file path using RLGRAP-FILENAME. I have not got F4 for this. How to solve this problem, can anybody pls help.
Regards,
Naseer.

Hi,
refer to the following code:
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_pc.
DATA: it_tab TYPE filetable,
          wf_subrc TYPE i.
DATA: wf_pcfile LIKE rlgrap-filename.
DATA: wf_filter TYPE string,
        wf_dir TYPE string,
        wf_title TYPE string,
        wf_ext TYPE string.
* if p_ml = 'X'.                  "Manula Load - PC File
wf_title = text-012.          "Window title
wf_ext = '.TXT'.           "Extension of the file
wf_filter = 'Text Files (*.TXT)|*.TXT'.         "File Type
wf_dir = wf_pcfile.           "Directory
*Adds a GUI-Supported Feature
CALL METHOD cl_gui_frontend_services=>file_open_dialog
    EXPORTING
      window_title      = wf_title
      default_extension = wf_ext
      file_filter       = wf_filter
      initial_directory = wf_dir
    CHANGING
      file_table        = it_tab
      rc                = wf_subrc.
Hope this helps.
<REMOVED BY MODERATOR>
Regards,
Sipra
Edited by: Alvaro Tejada Galindo on Jan 31, 2008 9:48 AM

WHY does the finder insist on rearranging the files in a folder in alphabetical order even when I have selected "none" in the preferences for file organization?

WHY does the finder insist on rearranging the files and/or documents in a folder in alphabetical order even when I have selected "none" in the preferences for file organization? Even after I numbered the documents/folders to keep them in my preferred order, it will still displace them occasionally. This is becoming increasingly frustrating!
Is this a "Pages" issue or "FInder"? The vast majority of documents I use are in Pages, but there are also Numbers, PDFs, jpegs and a few other applications involved. This never happened before I upgraded to Mountain Lion; in Tiger, the documents (mostly Appleworks) and files stayed where I wanted them to be.
I am visually oriented, and prefer to arrange items in a folder in an order that makes them easier for me to access, which is often NOT alphabetical.
Can anyone suggest a solution? Please??
Thank you.
Sara

nbar,
Thank you for your reply.
However, I do not understand what you mean by "user account." I am the only user, and can find no options for "user" or "guest." The parental controls have always been off, as there are no other people who have access to my computer.
Frank,
Thank you for your reply.
All my documents, files and folders are in icon view, Arranged By: none in both view and view options. This arbitrary rearranging does not happen all the time, only when I make a substantial change to one of the documents in the file or folder. I'm not sure what you mean by "column heading."
MichaelLAX,
Thank you for your reply.
I know, to my sorrow, that Appleworks does not work with Mountain Lion. I spent at least three months converting approximately 2,000 Appleworks documents to Pages, Numbers, Bento (for databases) and Touchdraw (for drawings). So this is not the problem; but as I said, I did not have this rearranging problem with Appleworks - the icons stayed where I wanted them to be. I still miss the ease and reliability of Appleworks, darn it!
Frank,
Thank you for your second reply.
I do have the Sort By: in view options as well as in view set to "none." The finder still insists on rearranging, but only when I have made a substantial change to a document in that file or folder.
Any futher thoughts?
xdab,
Thank you for your reply.
"Are you are using icon view, but for some reason the finder moves files around? is that the problem?"
YES!! This is exactly the problem.
"If this operation is successful then erase the original and rename the new one to the name originally chosen by the user."
This seems like a lot of trouble, especially as I often work on several documents at the same time.
"By the way, the finder has a "clean up by" menu that rearranges icons in one of the standard orders, there are shortcuts that produce the same effect, for example <option><cmd>1 sorts them by name. Is it possible that this shortcut was typed by mistake without you noticing?"
I do know about this "clean up by" option, and avoid it like the plague! So I doubt this is the issue, and I infrequently use keyboard shortcuts like this anyway.
Thanks all who replied. None of the suggestions seem to work, however. Any others out there?
Regards,
Sara

The file size of selected file in input file control is shown as 0 for multiple file selection in Safari 5.1

The file size of selected file in input file control is shown as 0 for multiple file selection in Safari 5.1. If you select single file, then it is able to return file size correctly. However, if you select multiple files, then the file size of each of the selected file is always returned as 0 from javascript. This works correctly in Safari 4.0 but it does not work in Safari 5.1.
How do I get the correct file size in Safari 5.1 ?

If you want to post (or send me) a link to the lrcat file, I'd take a look at it for you, and give you a break-down what's consuming all the bytes. But it might be fun to learn how to do that yourself (e.g. using SQL). I use SQLiteSpy, but other people have their favorites.. (or you can use a command-line client if you prefer..). One way: just run "drop table "{table-name}" on each table then look at filesize (do this to a copy, not the real thing).
Anyway, it's hard to imagine keywords and captions etc. taking much of the space, since even if you had 1000 10-character words of text metadata per photo average that still only adds up to 117MB, which isn't a substantial portion of that 8G you're seeing occupied.
Anyway, if you've painted the heck out of most of them and not cleared dev history, that'll do it - that's where I'd put my money too...
One thing to consider to keep file-size down:
===================================
* After reaching a milestone in your editing, take a snapshot then clear edit history, or the top part of it anyway (e.g. leave the import step), using a preset like:
Clear Edit History.lrtemplate
s = {
    id = "E36E8CB3-B52B-41AC-8FA9-1989FAFD5223",
    internalName = "No Edit",
    title = "Clear Edit History",
    type = "Develop",
    value = {
        settings = {
            NoEdit = true,
        uuid = "34402820-B470-4D5B-9369-0502F2176B7F",
    version = 0,
(that's my most frequently used preset, by far ;-})
PS - I've written a plugin called DevHistoryEditor, which can auto-consolidate steps and reduce catalog size - it's a bit cumbersome to use a.t.m. but in case you're interested...
Rob

How do i get the path of the file selected for opening in JFileChooser

hi
I need to get the path of the file selected for opening or saving in the JFileChooser dialog box.Is there any method available.if not how do i get that?
Thanks and Regards
Saminathan.

don't know if its the best/only way, but you could use the getSelectedFile() method in JFileChooser which returns a file and then use the getAbsolutePath() file method

Bdc for CJ20N. Selecting information button.

Subject changed by moderator. Please use meaningful subject in future. Message moved to correct forum, please take care to post in the correct forum.
Hi,
I am trying to write a bdc for cj20n where the Status profile have to change but In the program throug recording the information button is not being selected.
is there any way to change the Status profile ?
debjani
Edited by: Matt on Nov 26, 2008 8:06 AM

Hi
First things first, CJ20N tcode is not feasible for BDC. Dont perform BDC on enjoy transactions. Use BAPI. BAPI_PROJECT_MAINTAIN is very useful for PS.
Vishwa.

When trying to import images from an external hard drive into Lightroom 5 it states no preview for the files selected

Go easy on me here….
Trying to import images from external hard drive into Lightroom 5 but the selected images state 'no preview for file'.
All other images on the external hard drive can be previewed and imported without issue.
I have tried adding the images onto the computers hard drive as well but still no joy.
I've used Lightroom 5 previously and had no issue so convinced its the files I'm trying to import (jpeg files).
Any help greatly appreciated.

Go easy on me here….
Trying to import images from external hard drive into Lightroom 5 but the selected images state 'no preview for file'.
All other images on the external hard drive can be previewed and imported without issue.
I have tried adding the images onto the computers hard drive as well but still no joy.
I've used Lightroom 5 previously and had no issue so convinced its the files I'm trying to import (jpeg files).
Any help greatly appreciated.

File selection dialog box freezes for a few seconds

When I try to open files / select files from within certain applications (e.g. Aperture, Photomatix) the file selection dialog box freezes for a few seconds which becomes irritating because I can't scroll to the actual file that I want very easily .)
(I notice the problem generally when I am working in photo editing applications. And yes, I do have some 25MB TIFFs in the target folder...)
I suppose this is because the finder is "loading" a preview of the files.
Does this happen to everyone (if so, it would be quite a Windows-like irritation untypical of OSX).
If not, then what could be going wrong here?

I have answered my own question by a bit more research.
It seems a lot of people having this trouble for a while. It is down to Logitech software. Specifically the Logitech Control Center.
See this forum (last entry):
http://bit.ly/eEomwp
The simple solution: uninstall Logitech Control Center. The mouse still works without it.

How do I search for and select a repeating phrase in a file.

How do I search for and select a repeating phrase in a file read via Applescript. The file contains details of phone calls submitted to a charity and I want to be able to analyse the types of call taken. The phrase is 'Type of enquiry' and I want to extract the description that follows. I am a beginner at Applescript and have been working my way through Applescript 1-2-3 but cannot find an obvious solution although I have manged to open and read the file! All suggestions gratefully received.

In applescript you can use something like the following:
set {oldTID, my text item delimiters} to {my text item delimiters, "Type of enquiry"}
set dataBits to text items of textToParse
set my text item delimiters to oldTID
the variable dataBits, then, will be a list where every list item is a string that starts with the text following that phrase.
You could do regular expressions searches as well, but you'd need to download and install the Satimage osax.

BDC for file selection

Similar Messages

Maybe you are looking for