BDC Sessin Method errors display
Hi
I have a small doubt in BDC SESSION ERROR handling.
Can we display the erronious records to the user directly after executing the BDC program( Using SESSION METHOD) if any?
Please give an example.
Regards,
Ram
hi Ram,
check out this sample program ...
REPORT ztest_report
NO STANDARD PAGE HEADING
LINE-SIZE 255
MESSAGE-ID ZRASH.
* Internal Table Declarations *
*--Internal Table for Data Uploading.
DATA : BEGIN OF IT_FFCUST OCCURS 0,
KUNNR(10),
BUKRS(4),
KTOKD(4),
ANRED(15),
NAME1(35),
SORTL(10),
STRAS(35),
ORT01(35),
PSTLZ(10),
LAND1(3),
SPRAS(2),
AKONT(10),
END OF IT_FFCUST.
*--Internal Table to Store Error Records.
DATA : BEGIN OF IT_ERRCUST OCCURS 0,
KUNNR(10),
EMSG(255),
END OF IT_ERRCUST.
*--Internal Table to Store Successful Records.
DATA : BEGIN OF IT_SUCCUST OCCURS 0,
KUNNR(10),
SMSG(255),
END OF IT_SUCCUST.
*--Internal Table for Storing the BDC data.
DATA : IT_CUSTBDC LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
*--Internal Table for storing the messages.
DATA : IT_CUSTMSG LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA : V_FLAG1(1) VALUE ' ',
"Flag used for opening session.
V_TLINES LIKE SY-TABIX,
"For storing total records processed.
V_ELINES LIKE SY-TABIX,
"For storing the no of error records.
V_SLINES LIKE SY-TABIX.
"For storing the no of success records.
* Selection screen *
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS : V_FNAME LIKE RLGRAP-FILENAME,
V_SESNAM LIKE RLGRAP-FILENAME.
SELECTION-SCREEN END OF BLOCK B1.
* Start-of-selection *
START-OF-SELECTION.
*-- Form to upload flatfile data into the internal table.
PERFORM FORM_UPLOADFF.
* TOP-OF-PAGE *
TOP-OF-PAGE.
WRITE:/ 'Details of the error and success records for the transaction'
ULINE.
SKIP.
* End of Selection *
END-OF-SELECTION.
*-- Form to Generate a BDC from the Uploaded Internal table
PERFORM FORM_BDCGENERATE.
*--To write the totals and the session name.
PERFORM FORM_WRITEOP.
*& Form form_uploadff
* Form to upload flatfile data into the internal table.
FORM FORM_UPLOADFF .
*--Variable to change the type of the parameter file name.
DATA : LV_FILE TYPE STRING.
LV_FILE = V_FNAME.
*--Function to upload the flat file to the internal table.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = LV_FILE
* FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
* HEADER_LENGTH = 0
* READ_BY_LINE = 'X'
* DAT_MODE = ' '
* IMPORTING
* FILELENGTH =
* HEADER =
TABLES
DATA_TAB = IT_FFCUST
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC = 0.
*--Deleting the headings from the internal table.
DELETE IT_FFCUST INDEX 1.
*--Getting the total number of records uploaded.
DESCRIBE TABLE IT_FFCUST LINES V_TLINES.
ENDIF.
ENDFORM. " form_uploadff
*& Form Form_bdcgenerate
* Form to Generate a BDC from the Uploaded Internal table
FORM FORM_BDCGENERATE .
*--Generating the BDC table for the fields of the internal table.
LOOP AT IT_FFCUST.
PERFORM POPULATEBDC USING :
'X' 'SAPMF02D' '0105',
' ' 'BDC_OKCODE' '/00' ,
' ' 'RF02D-KUNNR' IT_FFCUST-KUNNR,
' ' 'RF02D-BUKRS' IT_FFCUST-BUKRS,
' ' 'RF02D-KTOKD' IT_FFCUST-KTOKD,
'X' 'SAPMF02D' '0110' ,
' ' 'BDC_OKCODE' '/00',
' ' 'KNA1-ANRED' IT_FFCUST-ANRED,
' ' 'KNA1-NAME1' IT_FFCUST-NAME1,
' ' 'KNA1-SORTL' IT_FFCUST-SORTL,
' ' 'KNA1-STRAS' IT_FFCUST-STRAS,
' ' 'KNA1-ORT01' IT_FFCUST-ORT01,
' ' 'KNA1-PSTLZ' IT_FFCUST-PSTLZ,
' ' 'KNA1-LAND1' IT_FFCUST-LAND1,
' ' 'KNA1-SPRAS' IT_FFCUST-SPRAS,
'X' 'SAPMFO2D' '0120',
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0125',
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0130',
' ' 'BDC_OKCODE' '=ENTR',
'X' 'SAPMF02D' '0340',
' ' 'BDC_OKCODE' '=ENTR',
'X' 'SAPMF02D' '0360',
' ' 'BDC_OKCODE' '=ENTR',
'X' 'SAPMF02D' '0210',
' ' 'KNB1-AKONT' IT_FFCUST-AKONT,
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0215',
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0220',
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0230',
' ' 'BDC_OKCODE' '=UPDA'.
*--Calling the transaction 'fd01'.
CALL TRANSACTION 'FD01' USING IT_CUSTBDC MODE 'N' UPDATE 'S'
MESSAGES INTO IT_CUSTMSG.
IF SY-SUBRC <> 0.
*--Populating the error records internal table.
IT_ERRCUST-KUNNR = IT_FFCUST-KUNNR.
APPEND IT_ERRCUST.
CLEAR IT_ERRCUST.
*--Opening a session if there is an error record.
IF V_FLAG1 = ' '.
PERFORM FORM_OPENSESSION.
V_FLAG1 = 'X'.
ENDIF.
*--Inserting the error records into already open session.
IF V_FLAG1 = 'X'.
PERFORM FORM_INSERT.
ENDIF.
*--Populating the Success records internal table.
ELSE.
IT_SUCCUST-KUNNR = IT_FFCUST-KUNNR.
APPEND IT_SUCCUST.
CLEAR IT_SUCCUST.
ENDIF.
*--Displaying the messages.
IF NOT IT_CUSTMSG[] IS INITIAL.
PERFORM FORM_FORMATMSG.
ENDIF.
*--Clearing the message and bdc tables.
CLEAR : IT_CUSTBDC[],IT_CUSTMSG[].
ENDLOOP.
*--Getting the total no of error records.
DESCRIBE TABLE IT_ERRCUST LINES V_ELINES.
*--Getting the total no of successful records.
DESCRIBE TABLE IT_SUCCUST LINES V_SLINES.
*--Closing the session only if it is open.
IF V_FLAG1 = 'X'.
PERFORM FORM_CLOSESESS.
ENDIF.
ENDFORM. " Form_bdcgenerate
*& Form populatebdc
* FOrm to Populate the BDC table.
FORM POPULATEBDC USING VALUE(P_0178)
VALUE(P_0179)
VALUE(P_0180).
IF P_0178 = 'X'.
IT_CUSTBDC-PROGRAM = P_0179.
IT_CUSTBDC-DYNPRO = P_0180.
IT_CUSTBDC-DYNBEGIN = 'X'.
ELSE.
IT_CUSTBDC-FNAM = P_0179.
IT_CUSTBDC-FVAL = P_0180.
ENDIF.
APPEND IT_CUSTBDC.
CLEAR IT_CUSTBDC.
ENDFORM. " populatebdc
*& Form FORM_OPENSESSION
* Form to Open a session.
FORM FORM_OPENSESSION .
*--Variable to convert the given session name into reqd type.
DATA : LV_SESNAM(12).
LV_SESNAM = V_SESNAM.
*--Opening a session.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = LV_SESNAM
HOLDDATE = '20040805'
KEEP = 'X'
USER = SY-UNAME
PROG = SY-CPROG
* IMPORTING
* QID =
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11
IF SY-SUBRC <> 0.
WRITE :/ 'Session not open'.
ENDIF.
ENDFORM. " FORM_OPENSESSION
*& Form FORM_INSERT
* fORM TO INSERT ERROR RECOED INTO A SESSION.
FORM FORM_INSERT .
*--Inserting the record into session.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'FD01'
* POST_LOCAL = NOVBLOCAL
* PRINTING = NOPRINT
* SIMUBATCH = ' '
* CTUPARAMS = ' '
TABLES
DYNPROTAB = IT_CUSTBDC
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7
IF SY-SUBRC <> 0.
WRITE :/ 'Unable to insert the record'.
ENDIF.
ENDFORM. " FORM_INSERT
*& Form FORM_CLOSESESS
* Form to Close the Open Session.
FORM FORM_CLOSESESS .
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
ENDIF.
ENDFORM. " FORM_CLOSESESS
*& Form FORM_FORMATMSG
* Form to format messages.
FORM FORM_FORMATMSG .
*--Var to store the formatted msg.
DATA : LV_MSG(255).
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = SY-MSGID
LANG = SY-LANGU
NO = SY-MSGNO
V1 = SY-MSGV1
V2 = SY-MSGV2
V3 = SY-MSGV3
V4 = SY-MSGV4
IMPORTING
MSG = LV_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC = 0.
WRITE :/ LV_MSG.
ENDIF.
ULINE.
ENDFORM. " FORM_FORMATMSG
*& Form form_writeop
* To write the totals and the session name.
FORM FORM_WRITEOP .
WRITE :/ 'Total Records Uploaded :',V_TLINES,
/ 'No of Error Records :',V_ELINES,
/ 'No of Success Records :',V_SLINES,
/ 'Name of the Session :',V_SESNAM.
ULINE.
ENDFORM. " form_writeop
regards,
Santosh
Similar Messages
-
Listing BDC session method error records
Hi ABAP'rs,
Can any one help me, how to show error records of BDC session method on the List screen.
Thanks and Regards,
Param.Hi,
goto sm35 and find the error logs.
what do you mean by list screen...do you mean in ort output ?
Regards,
pankaj singh -
Error in my BDC SESSION METHOD
Hi,
I was trying work on BDC SESSION METHOD AND MY TCODE IS XK01.
Here is my code can some one tell me where i am doing wrong becoz its not giving the output as I expected. And I am uploading a tab delimeter file.
report ZAN_BDCVENDOR
no standard page heading line-size 255.
include bdcrecx1.
DATA: I_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF RECORD OCCURS 0,
LIFNR(016),
BURKS(004),
EKORG(004),
KTOKK(004),
AKONT(010),
FDGRV(010),
WAERS(005),
END OF RECORD.
start-of-selection.
perform open_group.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = 'C:\VENDOR.TXT'
FILETYPE = 'ASC'
tables
data_tab = RECORD
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT RECORD.
perform bdc_dynpro using 'SAPMF02K' '0100'.
perform bdc_field using 'BDC_CURSOR'
'USE_ZAV'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02K-LIFNR'
'8765'.
perform bdc_field using 'RF02K-BUKRS'
'1000'.
perform bdc_field using 'RF02K-EKORG'
'1000'.
perform bdc_field using 'RF02K-KTOKK'
'0001'.
perform bdc_field using 'USE_ZAV'
'X'.
perform bdc_dynpro using 'SAPMF02K' '0210'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-FDGRV'.
perform bdc_field using 'BDC_OKCODE'
'=UPDA'.
perform bdc_field using 'LFB1-AKONT'
'160000'.
perform bdc_field using 'LFB1-FDGRV'
'A1'.
perform bdc_dynpro using 'SAPMF02K' '0310'.
perform bdc_field using 'BDC_CURSOR'
'LFM1-WAERS'.
perform bdc_field using 'BDC_OKCODE'
'=UPDA'.
perform bdc_field using 'LFM1-WAERS'
'usd'.
perform bdc_transaction using 'XK01'.
ENDLOOP.
perform close_group.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
DEST = FILLER8
GROUP = 'SESSION1'
HOLDDATE = FILLER8
KEEP = FILLER1
USER = SY-UNAME
RECORD = FILLER1
PROG = SY-CPROG
IMPORTING
QID =
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11
IF sy-subrc <> 0.
WRITE 'ERROR IN OPEN_GROUP'.
ENDIF.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = TCODE
POST_LOCAL = NOVBLOCAL
PRINTING = NOPRINT
SIMUBATCH = ' '
CTUPARAMS = ' '
TABLES
dynprotab = I_BDCDATA
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
I appreciateHi,
i guess, the error is due to, u didnt pass the TCODE parameter in BDC_INSERT FM.
Try by passing it...
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = TCODE*
POST_LOCAL = NOVBLOCAL
PRINTING = NOPRINT
SIMUBATCH = ' '
CTUPARAMS = ' '
TABLES
dynprotab = I_BDCDATA
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7
Hope it works!!
Regards,
Pavan -
How to handle the errors in BDC Session method
Hi All,
I am uploading Material Master (MM01) records using BDC Session Method.my problem is when i am running the program, all the error records are going to flat file.how can i correcting the error records and after correction how can i re-process the error records.tell me with example.
i have around 70,000 records in my flat file.Hi,
I am attaching few threads.Hope these will help you.
If there are any error records in session, all those error records will get poulated in log .SM35 and after the session is completed , u can see error records which can be corrected and reprocessed again
We have the structures BDCLD and BDCLM, which will capture the log details inthe session. Firstly, sesssion should be processed. After that log will be created. Then caputure the information into an internal table using BDCLM and BDCLD.
and refer the link.
error correction in bdc session
regards
Madhu -
Creating Sales order texts while using BDC session method is not working
Hi All,
I have an existing program which creates sales order using BDC session method.( Actual program uses BAPI to create sales order and in case if any error occurs during creation of sales order BDC session is generated so that user can process it later and i am facing issues in this part of code where it uses BDC)
I wanted to modify this BDC sesion to update the sales order text also. I tried recording VA01 for creationg sales order text unfortunatly it is not capturing the data i am entering in the text fields.
Please suggest if there is any way to create sales order using BDC.
Regards
SheebaHi Madhu,
'=TP_CREATE' is the OK code i am getting for creating TEXTS. But the text entered are not captured in BDC.
Part of BDC program generated for cretaing sales order texts.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=%_GC 128 22'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_CREATE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=%_GC 128 22'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_CREATE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=SICH'.
Regards,
Sheeba -
Problem in bdc session method for tcode FS00
Hi Experts,
problem in bdc session method, when i run this program no output is shown.
Even it is not calling the transaction.
code as follows.
*& Report Z_GL_MASTER
*& CATEGORY = BDC.
*& DESCRIPTION = UPLOADING G/L MASTER RECORDS.
*& TECHNICAL CONST = FRANCIS REDDY.
*& FUNTIONAL CONST = FICO.
REPORT Z_GL_MASTER.
*& Internal Table
DATA : BEGIN OF IT_UPLOAD OCCURS 0,
SAKNR LIKE GLACCOUNT_SCREEN_KEY-SAKNR, " ACCOUNT NUMBER.
BUKRS LIKE GLACCOUNT_SCREEN_KEY-BUKRS, " COMPANY CODE.
KTOKS LIKE GLACCOUNT_SCREEN_COA-KTOKS, " ACCOUNT GROUP.
XPLACCT LIKE GLACCOUNT_SCREEN_COA-XPLACCT, " P&L STATEMEMENT.
GVTYP LIKE GLACCOUNT_SCREEN_COA-GVTYP, " P&L STATEMENT TYPE.
XBILK LIKE GLACCOUNT_SCREEN_COA-XBILK, " BALANCE SHEET STATEMENT
SHORT LIKE GLACCOUNT_SCREEN_COA-TXT20_ML, " SHORT TEXT.
LONG LIKE GLACCOUNT_SCREEN_COA-TXT50_ML, " LONG TEXT.
WAERS LIKE GLACCOUNT_SCREEN_CCODE-WAERS, " ACCOUNT CURRENCY.
XSALH LIKE GLACCOUNT_SCREEN_CCODE-XSALH, " ONLY BALANCES IN LOCAL CURRENCY.
MITKZ LIKE GLACCOUNT_SCREEN_CCODE-MITKZ, " RECONCILATION ACCOUNT FOR ACCOUNT TYPEGLACCOUNT_SCREEN_CCODE-MITKZ
XOPVW LIKE GLACCOUNT_SCREEN_CCODE-XOPVW, " OPEN ITEM MANAGEMENT.
XKRES LIKE GLACCOUNT_SCREEN_CCODE-XKRES, " LINE ITEM DISPLAY.
ZUAWA LIKE GLACCOUNT_SCREEN_CCODE-ZUAWA, " SORT KEY.
FSTAG LIKE GLACCOUNT_SCREEN_CCODE-FSTAG, " FIELD STATUS GROUP.
XGKON LIKE GLACCOUNT_SCREEN_CCODE-XGKON, " RELAVENT CASH FLOW.
END OF IT_UPLOAD.
*& Internal Table FOR BDC DATA.
DATA : IT_BDCDATA TYPE BDCDATA OCCURS 0 WITH HEADER LINE.
*& DATA DECLARATIONS.
DATA : V_FILE LIKE RLGRAP-FILENAME.
*& SELECTION SCREEN.
PARAMETER : P_FILE LIKE V_FILE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
PERFORM GET_FILENAME.
START-OF-SELECTION.
PERFORM UPLOAD_DATA.
PERFORM BDCDATA_OPEN.
PERFORM BDC_POPULATE.
PERFORM BDC_CLOSE.
*& Form GET_FILENAME
form GET_FILENAME .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = 'P_FILE'
IMPORTING
FILE_NAME = P_FILE.
endform. " GET_FILENAME
*& Form UPLOAD_DATA
form UPLOAD_DATA .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = P_FILE
FILETYPE = 'DAT'
TABLES
data_tab = IT_UPLOAD.
endform. " UPLOAD_DATA
*& Form BDCDATA_OPEN
FORM FOR BDC_OPEN_GROUP.
form BDCDATA_OPEN .
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = 'GLMASTER'
HOLDDATE = SY-DATUM
KEEP = 'X'
USER = SY-UNAME.
endform. " BDCDATA_OPEN
*& Form BDC_POPULATE
POPULATING BDC DATA .
form BDC_POPULATE .
loop at it_upload.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=ACC_CRE'.
PERFORM BDC_SUB2 USING 'BDC_CURSOR' 'GLACCOUNT_SCREEN_KEY-SAKNR'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_KEY-SAKNR' IT_UPLOAD-SAKNR.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_KEY-BUKRS' IT_UPLOAD-BUKRS.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=2102_GROUP'.
PERFORM BDC_SUB2 USING 'BDC_CURSOR' 'GLACCOUNT_SCREEN_COA-KTOKS'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-KTOKS' IT_UPLOAD-KTOKS.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-XPLACCT' IT_UPLOAD-XPLACCT.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=2102_BS_PL'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-GVTYP' IT_UPLOAD-GVTYP.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-XBILK' IT_UPLOAD-XBILK.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_CURSOR' 'GLACCOUNT_SCREEN_COA-TXT20_ML'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-TXT20_ML' IT_UPLOAD-SHORT.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-TXT50_ML' IT_UPLOAD-LONG.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=TAB02'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-WAERS' IT_UPLOAD-WAERS.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-XSALH' IT_UPLOAD-XSALH.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-MITKZ' IT_UPLOAD-MITKZ.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-XOPVW' IT_UPLOAD-XOPVW.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-XKRES' IT_UPLOAD-XKRES.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-ZUAWA' IT_UPLOAD-ZUAWA.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=TAB03'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-FSTAG' IT_UPLOAD-FSTAG.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-XGKON' IT_UPLOAD-XGKON.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'FS00'
TABLES
dynprotab = IT_BDCDATA.
endloop.
endform. " BDC_POPULATE
*& Form BDC_CLOSE
FORM FOR CLOSING BDC_GROUP
form BDC_CLOSE .
CALL FUNCTION 'BDC_CLOSE_GROUP'.
endform. " BDC_CLOSE
*& Form BDC_SUB1
FORM FOR BDCDATA.
form BDC_SUB1 USING A B C.
CLEAR IT_BDCDATA.
IT_BDCDATA-DYNBEGIN = A.
IT_BDCDATA-PROGRAM = B.
IT_BDCDATA-DYNPRO = C.
APPEND IT_BDCDATA.
endform. " BDC_SUB1
*& Form BDC_SUB2
text
form BDC_SUB2 USING A B.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = A.
IT_BDCDATA-FVAL = B.
APPEND IT_BDCDATA.
endform. " BDC_SUB2
Points will be rewarded.
Thanks in advance.
Francis.Hi,
Once the program is executed..It will a BDC session..
THen you have to use the transaction SM35..To process the BDC session..
Thanks,
Naren -
Regarding UCF_AcroForm error displayed when trying to open the pdf form
Hi,
Iam receiving the pop up when trying to open the pdf form.The Error is Server Error Class: UCF_AcroForm Method: Error.The Error displayed in some system and in some other system the form is working fine.The Form is created using the Designer 8.0.The form is working fine in reader 8.0.Is there any problem in the reader version.Is there any solution for this problem please provide.
Thanks and Regards,
SatheshKumar RSathesh,
Similar issue has been reported at SDN so searching would have helped you. See below threads for solutions:-
UCF_AcroForm error
MSS UCF_AcroForm error displayed when trying to display form in PCR
Chintan -
Server error: Class: UCF Acroform Method error Message: Could not send mess
Hi Gurus,
I'm having a problem with displaying PDF file in the portal. I tried reinstalling Adobe 9. Tick and untick the option Display PDF in browser. But still encountering the error. Is it something to do with IE version? Please Help. Thanks in advance.
Server error: Class: UCF Acroform Method error Message: Could not send messageHi,
Please speify the system information so that I can help you
Regards
Sharanya.R -
How to overcome view changes in bdc session method using recording ?
how to overcome view changes in bdc session method using recording ?
ex-for mm01 in recording if i selected views basic data1 and basic data2.
i seheduleded for background for after 3 days .
if any body changes views by selecting other views also.
how to overcome this with out programming ?
is there any settings ?Hi,
I am attaching few threads.Hope these will help you.
If there are any error records in session, all those error records will get poulated in log .SM35 and after the session is completed , u can see error records which can be corrected and reprocessed again
We have the structures BDCLD and BDCLM, which will capture the log details inthe session. Firstly, sesssion should be processed. After that log will be created. Then caputure the information into an internal table using BDCLM and BDCLD.
and refer the link.
error correction in bdc session
regards
Madhu -
Hi,
Eplained BDC Session Method
flat file upload into sapABAP BDC SESSION METHOD SAMPLE CODE
pool of form routines
include zmppn001.
Define BDC Table Structure
data: begin of itab_bdc_tab occurs 0.
include structure bdcdata.
data: end of itab_bdc_tab.
Input record layout of Leagcy File
data: begin of itab_xcel occurs 0,
matnr(18) type c,
werks(4) type c,
alnag(2) type c,
verid(4) type c,
text1(40) type c,
bstmi like mkal-bstmi,
bstma like mkal-bstma,
adatu(10) type c,
bdatu(10) type c,
stlal(2) type c,
stlan(1) type c,
serkz(1) type c,
mdv01(8) type c,
elpro(4) type c,
alort(4) type c,
end of itab_xcel.
data: begin of lt_pp04_cache occurs 0,
matnr like itab_xcel-matnr,
werks like itab_xcel-werks,
alnag like itab_xcel-alnag,
plnnr like mapl-plnnr,
arbpl like crhd-arbpl,
ktext like crtx-ktext,
end of lt_pp04_cache.
data: v_ssnnr(4) type n,
v_lines_in_xcel like sy-tabix,
v_ssnname like apqi-groupid,
v_trans_in_ssn type i,
wa_xcel LIKE itab_xcel,
l_tabix like sy-tabix,
v_matnr like rc27m-matnr,
v_plnnr like mapl-plnnr,
v_plnal like mapl-plnal,
v_tcode like sy-tcode value 'C223',
v_plnty like plas-plnty value 'R',
v_objty like crhd-objty value 'A',
v_plpo_steus like plpo-steus value 'PP04',
v_verwe like crhd-verwe value '0007'.
Parameters
selection-screen: skip 3.
selection-screen: begin of block 1 with frame.
parameters: p_name like rlgrap-filename
default 'C:\My Documents\InputFile.txt'
obligatory,
bdc session name prefix
p_bdcpfx(6) default 'ZPVCRT'
obligatory,
number for transction per BDC session
p_trnssn type i
default 2000 obligatory,
retain the BDC session after successfull execution
p_keep like apqi-qerase
default 'X',
user who will be executing BDC session
p_uname like apqi-userid
default sy-uname
obligatory.
selection-screen: end of block 1.
possible entry list (F4 dropdown) for input file name
at selection-screen on value-request for p_name.
*-SELECT FILE FROM USERS LOCAL PC
call function 'WS_FILENAME_GET'
exporting
DEF_FILENAME = ' '
def_path = 'C:\Temp\'
mask = ',.,..'
mode = 'O'
title = 'Select File '(007)
importing
filename = p_name
RC =
exceptions
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
others = 5.
if sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
begin the show
start-of-selection.
read data from input file
perform transfer_xcel_to_itab.
loop at itab_xcel.
hang on to xcel line num
l_tabix = sy-tabix.
each line in the xcel file marks begining of new prod.version defn
if num-of-trnas-in-session = 0, create new BDC session
if v_trans_in_ssn is initial.
perform bdc_session_open.
endif.
begin new bdc script for rtg create trans
fill in bdc-data for prod.version maintenance screens
perform bdc_build_script.
insert the bdc script as a BDC transaction
perform bdc_submit_transaction.
keep track of how many BDC transactions were inserted in the BDC
session
add 1 to v_trans_in_ssn.
if the user-specified num of trans in BDC session is reached OR
if end of input file is reached, close the BDC session
if v_trans_in_ssn = p_trnssn or
l_tabix = v_lines_in_xcel.
perform bdc_session_close.
clear v_trans_in_ssn.
endif.
endloop.
top-of-page.
call function 'Z_HEADER'
EXPORTING
FLEX_TEXT1 =
FLEX_TEXT2 =
FLEX_TEXT3 =
FORM TRANSFER_XCEL_TO_ITAB *
Transfer Xcel Spreadsheet to SAP Internal Table *
form transfer_xcel_to_itab.
Read the tab-delimited file into itab
call function 'WS_UPLOAD'
exporting
filename = p_name
filetype = 'DAT'
IMPORTING
filelength = flength
tables
data_tab = itab_xcel
exceptions
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
others = 8.
if sy-subrc = 0.
sort the data
sort itab_xcel by matnr werks.
clear v_lines_in_xcel.
if no data in the file - error out
describe table itab_xcel lines v_lines_in_xcel.
if v_lines_in_xcel is initial.
write: / 'No data in input file'.
stop.
endif.
else.
if file upload failed - error out
write: / 'Error reading input file'.
stop.
endif.
endform.
FORM BDC_SESSION_OPEN *
Open BDC Session *
form bdc_session_open.
create bdc session name = prefix-from-selectn-screen + nnnn
add 1 to v_ssnnr.
concatenate p_bdcpfx v_ssnnr into v_ssnname.
open new bdc session
call function 'BDC_OPEN_GROUP'
exporting
client = sy-mandt
group = v_ssnname
keep = p_keep
user = p_uname
exceptions
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
others = 11.
endform.
FORM BDC_BUILD_SCRIPT *
Build BDC *
form bdc_build_script.
data: l_arbpl like crhd-arbpl,
l_text1 like mkal-text1,
l_mdv01 like mkal-mdv01,
l_mapl like mapl.
clear bdc-data itab - begin of new bdc transaction
clear itab_bdc_tab.
refresh itab_bdc_tab.
read material cross reference tables to determine sap part#
clear : v_matnr, v_plnnr, v_plnal.
perform read_matnr_cross_ref using itab_xcel-matnr
itab_xcel-werks
changing v_matnr.
determine the version description to use
if itab_xcel-text1 is initial.
l_text1 = itab_xcel-verid.
else.
l_text1 = itab_xcel-text1.
endif.
determine the routing group# and group ctr# to use
perform read_routing .
determine the production line to use
if itab_xcel-mdv01 is initial.
if not provided in the file then:
prod line = work ctr on the last PP04 op of the rtg determined above
perform read_wc_on_last_pp04 using v_plnnr v_plnal
changing l_mdv01.
NOTE: when executing the above form\routine, if v_plnnr is initial
or v_plnal is initial, THEN l_mdv01 will automatically be
returned blank (ie initial)
else.
l_mdv01 = itab_xcel-mdv01.
endif.
build bdc script
perform bdc_build_script_record
fill in initial screen
using: 'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=ENTE',
' ' 'MKAL-WERKS' itab_xcel-werks,
' ' 'MKAL-MATNR' v_matnr,
' ' 'MKAL_ADMIN-DISPO' space,
' ' 'MKAL-PLNNR' space,
' ' 'MKAL_ADMIN-STTAG' space,
' ' 'MKAL-PLNNG' space,
' ' 'MKAL-MDV01' space,
' ' 'MKAL-PLNNM' space,
click create button on initial screen and go to detail screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=CREA',
fill in the detail screen and go back to initial screen
'X' 'SAPLCMFV' '2000',
' ' 'BDC_OKCODE' '=CLOS',
' ' 'MKAL_EXPAND-MATNR' v_matnr,
' ' 'MKAL_EXPAND-VERID' itab_xcel-verid,
' ' 'MKAL_EXPAND-TEXT1' l_text1,
' ' 'MKAL_EXPAND-BSTMI' itab_xcel-bstmi,
' ' 'MKAL_EXPAND-BSTMA' itab_xcel-bstma,
' ' 'MKAL_EXPAND-ADATU' itab_xcel-adatu,
' ' 'MKAL_EXPAND-BDATU' itab_xcel-bdatu,
' ' 'MKAL_EXPAND-PLTYG' v_plnty,
' ' 'MKAL_EXPAND-PLNNG' v_plnnr,
' ' 'MKAL_EXPAND-ALNAG' v_plnal,
' ' 'MKAL_EXPAND-STLAL' itab_xcel-stlal,
' ' 'MKAL_EXPAND-STLAN' itab_xcel-stlan,
' ' 'MKAL_EXPAND-SERKZ' itab_xcel-serkz,
' ' 'MKAL_EXPAND-MDV01' l_mdv01,
' ' 'MKAL_EXPAND-ELPRO' itab_xcel-elpro,
' ' 'MKAL_EXPAND-ALORT' itab_xcel-alort,
save the production version from initial screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=SAVE'.
endform.
FORM BDC_SUBMIT_TRANSACTION *
Submit BDC Session *
form bdc_submit_transaction.
Load BDC script as a trqansction in BDC session
call function 'BDC_INSERT'
exporting
tcode = v_tcode
tables
dynprotab = itab_bdc_tab
exceptions
internal_error = 01
not_open = 02
queue_error = 03
tcode_invalid = 04.
endform.
FORM BDC_BUILD_SCRIPT_RECORD *
form bdc_build_script_record using dynbegin name value.
clear itab_bdc_tab.
if dynbegin = 'X'.
move: name to itab_bdc_tab-program,
value to itab_bdc_tab-dynpro,
'X' to itab_bdc_tab-dynbegin.
else.
move: name to itab_bdc_tab-fnam,
value to itab_bdc_tab-fval.
shift itab_bdc_tab-fval left deleting leading space.
endif.
append itab_bdc_tab.
endform.
FORM BDC_SESSION_CLOSE *
Close BDC Session *
form bdc_session_close.
close the session
call function 'BDC_CLOSE_GROUP'
exceptions
not_open = 1
queue_error = 2
others = 3.
skip 2.
if sy-subrc ne 0.
write: / 'Error Closing BDC Session ' , 'RETURN CODE: ', sy-subrc.
else.
write : / 'Session created:', v_ssnname,
50 '# of transactions:', v_trans_in_ssn.
endif.
endform.
*& Form read_routing_cache
*FORM read_routing_cache USING pi_matnr
pi_werks
pi_alnag
pi_verid
pi_mdv01.
DATA: BEGIN OF lt_plpo OCCURS 0,
vornr LIKE plpo-vornr,
objty LIKE crhd-objty,
objid LIKE crhd-objid,
arbpl LIKE crhd-arbpl,
END OF lt_plpo,
l_mapl_plnnr LIKE mapl-plnnr.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
SELECT plnnr INTO l_mapl_plnnr
FROM mapl UP TO 1 ROWS
WHERE matnr = pi_matnr AND
werks = pi_werks AND
plnty = 'R' AND
plnal = pi_alnag AND
loekz = space.
ENDSELECT.
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
-- the work center was not determined yet AND
-- work center was really needed for this line in the input file
then
-- read the work center from last PP04 operation on the routing
-- update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
*ENDFORM. " read_last_pp04_operation_cache
*& Form read_routing
form read_routing.
data: begin of lt_mapl occurs 0,
plnnr like mapl-plnnr,
plnal like mapl-plnal,
end of lt_mapl,
l_arbpl like crhd-arbpl.
get all the rtg# and grp ctr# from MAPL
select plnnr plnal
into corresponding fields of table lt_mapl
from mapl
where matnr = v_matnr and
werks = itab_xcel-werks and
plnty = v_plnty and "Rate Routing
loekz = space. "with del flag = OFF
sort lt_mapl by plnal.
if not itab_xcel-verid is initial.
if the verid=0001 then use the 1st good rtg-grp# and grp-ctr#
if itab_xcel-verid = '0001'.
read table lt_mapl index 1.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
else.
if the verid<>0001 then use the rtg-grp# and grp-ctr# of the routing
whose work center on the last PP04 operation matches the given verid
loop at lt_mapl.
clear l_arbpl.
get the work center from the last PP04 operation
perform read_wc_on_last_pp04 using lt_mapl-plnnr
lt_mapl-plnal
changing l_arbpl.
if itab_xcel-verid = l_arbpl.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
exit.
endif.
endloop.
endif.
else.
do nothing
endif.
For version IDs that are other then '0000' or 'ZWIP' :--
if itab_xcel-verid NE '0000' and
itab_xcel-verid NE 'ZWIP'.
if routing group# or group counter was not determined, make the
valid-to date 99/99/9999 so that the BDC, on execution, errors out.
if v_plnnr is initial or
v_plnal is initial.
itab_xcel-bdatu = '99/99/9999'.
endif.
endif.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
-- the work center was not determined yet AND
-- work center was really needed for this line in the input file
then
-- read the work center from last PP04 operation on the routing
-- update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
endform. " read_last_pp04_operation_cache
*& Form read_wc_on_last_pp04
form read_wc_on_last_pp04 using pi_plnnr
pi_plnal
changing pe_arbpl.
data: begin of lt_plpo occurs 0,
vornr like plpo-vornr,
objty like crhd-objty,
objid like crhd-objid,
arbpl like crhd-arbpl,
end of lt_plpo.
get all the PP04 operations for the given rtg# & grp-ctr#
select vornr eobjty eobjid e~arbpl
into corresponding fields of table lt_plpo
from plas as b
inner join plpo as c
on bplnty = cplnty and
bplnnr = cplnnr and
bzaehl = czaehl
inner join crhd as e
on carbid = eobjid
where b~plnty = v_plnty and "Rate Routing
b~plnnr = pi_plnnr and
b~plnal = pi_plnal and
c~loekz = space and "Oper Del Flag = OFF
c~steus = v_plpo_steus and "PP04
e~objty = v_objty. "WC Obj Type = 'A'
read the last operation
sort lt_plpo by vornr descending.
read table lt_plpo index 1.
pe_arbpl = lt_plpo-arbpl.
endform.
Regards. -
Hi,
1) How do I make the BDC that I am working on continue in the background, even if there is an error (Say a field isn't filled in or the entry is not valid, which can occur when a certain entered number does not exit in the database.)
It should continue from the record following the one that caused an error.
2) When the error occurs, I want to mark one field with the value 'X'. This is done, so that after all processing is complete, I will display a write screen with a field from the table, where the last field is marked as x.
Thanks,
Johnhi
s...the error record will be skipped and the bdc will continue with the next record, if the mode is N
chk this thread
BDC - continue after error
if helpful, reward
Sathish. R -
Hello Friends,
Can you guide me how to create BDC with SESSION method.?
Please mantion examples.
Thanks in advance.
Regards,
nimesh masterSee below example code :
Call three FM : BDC_OPEN_GROUP,BDC_INSERT and BDC_CLOSE_GROUP.
Once you execute the program and it creates the session at SM35 Transaction.
Report : ZMPPC011
Type : Data upload
Author : Chetan Shah
Date : 05/05/2005
Transport : DV3K919557
Transaction: ??
Description: This ABAP/4 Program creates new Production Versions
(C223). It accepts tab-delimited spreadsheet input and
creates BDC sessions.
Modification Log
Date Programmer Request # Description
06/10/2005 Chetan Shah DV3K919557 Initial coding
report zmppc011 no standard page heading line-size 120 line-count 55
message-id zz.
pool of form routines
include zmppn001.
Define BDC Table Structure
data: begin of itab_bdc_tab occurs 0.
include structure bdcdata.
data: end of itab_bdc_tab.
Input record layout of Leagcy File
data: begin of itab_xcel occurs 0,
matnr(18) type c,
werks(4) type c,
alnag(2) type c,
verid(4) type c,
text1(40) type c,
bstmi like mkal-bstmi,
bstma like mkal-bstma,
adatu(10) type c,
bdatu(10) type c,
stlal(2) type c,
stlan(1) type c,
serkz(1) type c,
mdv01(8) type c,
elpro(4) type c,
alort(4) type c,
end of itab_xcel.
data: begin of lt_pp04_cache occurs 0,
matnr like itab_xcel-matnr,
werks like itab_xcel-werks,
alnag like itab_xcel-alnag,
plnnr like mapl-plnnr,
arbpl like crhd-arbpl,
ktext like crtx-ktext,
end of lt_pp04_cache.
data: v_ssnnr(4) type n,
v_lines_in_xcel like sy-tabix,
v_ssnname like apqi-groupid,
v_trans_in_ssn type i,
wa_xcel LIKE itab_xcel,
l_tabix like sy-tabix,
v_matnr like rc27m-matnr,
v_plnnr like mapl-plnnr,
v_plnal like mapl-plnal,
v_tcode like sy-tcode value 'C223',
v_plnty like plas-plnty value 'R',
v_objty like crhd-objty value 'A',
v_plpo_steus like plpo-steus value 'PP04',
v_verwe like crhd-verwe value '0007'.
Parameters
selection-screen: skip 3.
selection-screen: begin of block 1 with frame.
parameters: p_name like rlgrap-filename
default 'C:\My Documents\InputFile.txt'
obligatory,
bdc session name prefix
p_bdcpfx(6) default 'ZPVCRT'
obligatory,
number for transction per BDC session
p_trnssn type i
default 2000 obligatory,
retain the BDC session after successfull execution
p_keep like apqi-qerase
default 'X',
user who will be executing BDC session
p_uname like apqi-userid
default sy-uname
obligatory.
selection-screen: end of block 1.
possible entry list (F4 dropdown) for input file name
at selection-screen on value-request for p_name.
*-SELECT FILE FROM USERS LOCAL PC
call function 'WS_FILENAME_GET'
exporting
DEF_FILENAME = ' '
def_path = 'C:\Temp\'
mask = ',.,..'
mode = 'O'
title = 'Select File '(007)
importing
filename = p_name
RC =
exceptions
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
others = 5.
if sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
begin the show
start-of-selection.
read data from input file
perform transfer_xcel_to_itab.
loop at itab_xcel.
hang on to xcel line num
l_tabix = sy-tabix.
each line in the xcel file marks begining of new prod.version defn
if num-of-trnas-in-session = 0, create new BDC session
if v_trans_in_ssn is initial.
perform bdc_session_open.
endif.
begin new bdc script for rtg create trans
fill in bdc-data for prod.version maintenance screens
perform bdc_build_script.
insert the bdc script as a BDC transaction
perform bdc_submit_transaction.
keep track of how many BDC transactions were inserted in the BDC
session
add 1 to v_trans_in_ssn.
if the user-specified num of trans in BDC session is reached OR
if end of input file is reached, close the BDC session
if v_trans_in_ssn = p_trnssn or
l_tabix = v_lines_in_xcel.
perform bdc_session_close.
clear v_trans_in_ssn.
endif.
endloop.
top-of-page.
call function 'Z_HEADER'
EXPORTING
FLEX_TEXT1 =
FLEX_TEXT2 =
FLEX_TEXT3 =
FORM TRANSFER_XCEL_TO_ITAB *
Transfer Xcel Spreadsheet to SAP Internal Table *
form transfer_xcel_to_itab.
Read the tab-delimited file into itab
call function 'WS_UPLOAD'
exporting
filename = p_name
filetype = 'DAT'
IMPORTING
filelength = flength
tables
data_tab = itab_xcel
exceptions
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
others = 8.
if sy-subrc = 0.
sort the data
sort itab_xcel by matnr werks.
clear v_lines_in_xcel.
if no data in the file - error out
describe table itab_xcel lines v_lines_in_xcel.
if v_lines_in_xcel is initial.
write: / 'No data in input file'.
stop.
endif.
else.
if file upload failed - error out
write: / 'Error reading input file'.
stop.
endif.
endform.
FORM BDC_SESSION_OPEN *
Open BDC Session *
form bdc_session_open.
create bdc session name = prefix-from-selectn-screen + nnnn
add 1 to v_ssnnr.
concatenate p_bdcpfx v_ssnnr into v_ssnname.
open new bdc session
call function 'BDC_OPEN_GROUP'
exporting
client = sy-mandt
group = v_ssnname
keep = p_keep
user = p_uname
exceptions
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
others = 11.
endform.
FORM BDC_BUILD_SCRIPT *
Build BDC *
form bdc_build_script.
data: l_arbpl like crhd-arbpl,
l_text1 like mkal-text1,
l_mdv01 like mkal-mdv01,
l_mapl like mapl.
clear bdc-data itab - begin of new bdc transaction
clear itab_bdc_tab.
refresh itab_bdc_tab.
read material cross reference tables to determine sap part#
clear : v_matnr, v_plnnr, v_plnal.
perform read_matnr_cross_ref using itab_xcel-matnr
itab_xcel-werks
changing v_matnr.
determine the version description to use
if itab_xcel-text1 is initial.
l_text1 = itab_xcel-verid.
else.
l_text1 = itab_xcel-text1.
endif.
determine the routing group# and group ctr# to use
perform read_routing .
determine the production line to use
if itab_xcel-mdv01 is initial.
if not provided in the file then:
prod line = work ctr on the last PP04 op of the rtg determined above
perform read_wc_on_last_pp04 using v_plnnr v_plnal
changing l_mdv01.
NOTE: when executing the above form\routine, if v_plnnr is initial
or v_plnal is initial, THEN l_mdv01 will automatically be
returned blank (ie initial)
else.
l_mdv01 = itab_xcel-mdv01.
endif.
build bdc script
perform bdc_build_script_record
fill in initial screen
using: 'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=ENTE',
' ' 'MKAL-WERKS' itab_xcel-werks,
' ' 'MKAL-MATNR' v_matnr,
' ' 'MKAL_ADMIN-DISPO' space,
' ' 'MKAL-PLNNR' space,
' ' 'MKAL_ADMIN-STTAG' space,
' ' 'MKAL-PLNNG' space,
' ' 'MKAL-MDV01' space,
' ' 'MKAL-PLNNM' space,
click create button on initial screen and go to detail screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=CREA',
fill in the detail screen and go back to initial screen
'X' 'SAPLCMFV' '2000',
' ' 'BDC_OKCODE' '=CLOS',
' ' 'MKAL_EXPAND-MATNR' v_matnr,
' ' 'MKAL_EXPAND-VERID' itab_xcel-verid,
' ' 'MKAL_EXPAND-TEXT1' l_text1,
' ' 'MKAL_EXPAND-BSTMI' itab_xcel-bstmi,
' ' 'MKAL_EXPAND-BSTMA' itab_xcel-bstma,
' ' 'MKAL_EXPAND-ADATU' itab_xcel-adatu,
' ' 'MKAL_EXPAND-BDATU' itab_xcel-bdatu,
' ' 'MKAL_EXPAND-PLTYG' v_plnty,
' ' 'MKAL_EXPAND-PLNNG' v_plnnr,
' ' 'MKAL_EXPAND-ALNAG' v_plnal,
' ' 'MKAL_EXPAND-STLAL' itab_xcel-stlal,
' ' 'MKAL_EXPAND-STLAN' itab_xcel-stlan,
' ' 'MKAL_EXPAND-SERKZ' itab_xcel-serkz,
' ' 'MKAL_EXPAND-MDV01' l_mdv01,
' ' 'MKAL_EXPAND-ELPRO' itab_xcel-elpro,
' ' 'MKAL_EXPAND-ALORT' itab_xcel-alort,
save the production version from initial screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=SAVE'.
endform.
FORM BDC_SUBMIT_TRANSACTION *
Submit BDC Session *
form bdc_submit_transaction.
Load BDC script as a trqansction in BDC session
call function 'BDC_INSERT'
exporting
tcode = v_tcode
tables
dynprotab = itab_bdc_tab
exceptions
internal_error = 01
not_open = 02
queue_error = 03
tcode_invalid = 04.
endform.
FORM BDC_BUILD_SCRIPT_RECORD *
form bdc_build_script_record using dynbegin name value.
clear itab_bdc_tab.
if dynbegin = 'X'.
move: name to itab_bdc_tab-program,
value to itab_bdc_tab-dynpro,
'X' to itab_bdc_tab-dynbegin.
else.
move: name to itab_bdc_tab-fnam,
value to itab_bdc_tab-fval.
shift itab_bdc_tab-fval left deleting leading space.
endif.
append itab_bdc_tab.
endform.
FORM BDC_SESSION_CLOSE *
Close BDC Session *
form bdc_session_close.
close the session
call function 'BDC_CLOSE_GROUP'
exceptions
not_open = 1
queue_error = 2
others = 3.
skip 2.
if sy-subrc ne 0.
write: / 'Error Closing BDC Session ' , 'RETURN CODE: ', sy-subrc.
else.
write : / 'Session created:', v_ssnname,
50 '# of transactions:', v_trans_in_ssn.
endif.
endform.
*& Form read_routing_cache
*FORM read_routing_cache USING pi_matnr
pi_werks
pi_alnag
pi_verid
pi_mdv01.
DATA: BEGIN OF lt_plpo OCCURS 0,
vornr LIKE plpo-vornr,
objty LIKE crhd-objty,
objid LIKE crhd-objid,
arbpl LIKE crhd-arbpl,
END OF lt_plpo,
l_mapl_plnnr LIKE mapl-plnnr.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
SELECT plnnr INTO l_mapl_plnnr
FROM mapl UP TO 1 ROWS
WHERE matnr = pi_matnr AND
werks = pi_werks AND
plnty = 'R' AND
plnal = pi_alnag AND
loekz = space.
ENDSELECT.
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
-- the work center was not determined yet AND
-- work center was really needed for this line in the input file
then
-- read the work center from last PP04 operation on the routing
-- update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
*ENDFORM. " read_last_pp04_operation_cache
*& Form read_routing
form read_routing.
data: begin of lt_mapl occurs 0,
plnnr like mapl-plnnr,
plnal like mapl-plnal,
end of lt_mapl,
l_arbpl like crhd-arbpl.
get all the rtg# and grp ctr# from MAPL
select plnnr plnal
into corresponding fields of table lt_mapl
from mapl
where matnr = v_matnr and
werks = itab_xcel-werks and
plnty = v_plnty and "Rate Routing
loekz = space. "with del flag = OFF
sort lt_mapl by plnal.
if not itab_xcel-verid is initial.
if the verid=0001 then use the 1st good rtg-grp# and grp-ctr#
if itab_xcel-verid = '0001'.
read table lt_mapl index 1.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
else.
if the verid<>0001 then use the rtg-grp# and grp-ctr# of the routing
whose work center on the last PP04 operation matches the given verid
loop at lt_mapl.
clear l_arbpl.
get the work center from the last PP04 operation
perform read_wc_on_last_pp04 using lt_mapl-plnnr
lt_mapl-plnal
changing l_arbpl.
if itab_xcel-verid = l_arbpl.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
exit.
endif.
endloop.
endif.
else.
do nothing
endif.
For version IDs that are other then '0000' or 'ZWIP' :--
if itab_xcel-verid NE '0000' and
itab_xcel-verid NE 'ZWIP'.
if routing group# or group counter was not determined, make the
valid-to date 99/99/9999 so that the BDC, on execution, errors out.
if v_plnnr is initial or
v_plnal is initial.
itab_xcel-bdatu = '99/99/9999'.
endif.
endif.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
-- the work center was not determined yet AND
-- work center was really needed for this line in the input file
then
-- read the work center from last PP04 operation on the routing
-- update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
endform. " read_last_pp04_operation_cache
*& Form read_wc_on_last_pp04
form read_wc_on_last_pp04 using pi_plnnr
pi_plnal
changing pe_arbpl.
data: begin of lt_plpo occurs 0,
vornr like plpo-vornr,
objty like crhd-objty,
objid like crhd-objid,
arbpl like crhd-arbpl,
end of lt_plpo.
get all the PP04 operations for the given rtg# & grp-ctr#
select vornr eobjty eobjid e~arbpl
into corresponding fields of table lt_plpo
from plas as b
inner join plpo as c
on bplnty = cplnty and
bplnnr = cplnnr and
bzaehl = czaehl
inner join crhd as e
on carbid = eobjid
where b~plnty = v_plnty and "Rate Routing
b~plnnr = pi_plnnr and
b~plnal = pi_plnal and
c~loekz = space and "Oper Del Flag = OFF
c~steus = v_plpo_steus and "PP04
e~objty = v_objty. "WC Obj Type = 'A'
read the last operation
sort lt_plpo by vornr descending.
read table lt_plpo index 1.
pe_arbpl = lt_plpo-arbpl.
endform. " read_wc_on_last_pp04
Reward Points if it is useful
Thanks
Seshu -
No such method error when launching the Interactive form
Hi Experts,
I have developed a simeple Java Webdynpro application and added an Interactive form without any controls in it. Created the context with one value node and a binary value attribute.
I have assigned value node to datasource and binary attribute to pdfSource. When I launch the application I am getting the following no such method error.
java.lang.NoSuchMethodError: com/sap/tc/webdynpro/clientserver/uielib/adobe/api/IWDInteractiveForm.setTemplateSource(Ljava/lang/String;)V
The currently executed application, or one of the components it depends on, has been compiled against class file versions that are different from the ones that are available at runtime.
If the exception message indicates, that the modified class is part of the Web Dynpro Runtime (package com.sap.tc.webdynpro.*) then the running Web Dynpro Runtime is of a version that is not compatible with the Web Dynpro Designtime (Developer Studio or Component Build Server) which has been used to build + compile the application.
My NWDS is of Version 7.0.06
and J2EE Engine is of Version 6.40.
any guess why I am getting this error.
Thanks
Chinna.Issue solved. Compatablility issue NWDS 2.0 Version should use for NW 2004.
-
I used to update my iPhone 4S applications whenever a new update is available, but at this time, "unknown error" displays after entering my apple id password. Anyone who could help, whom they might have experienced? Thanks
Hi Christianjr,
When you say you reset your network settings, what do you mean, exactly?
I saw another post on this issue, and the poster indicated that they resolved the problem by turning off their cellular date option and wifi options in Settings, and then turned them back on.
Also, resetting your phone may help - press the Home and Power buttons at the same time and continue to hold both down until the Silver Apple appears. Once it is back up, click on the update option and see if it fixes the problem.
If none of those things work, then need to have details on what you did to reset your network settings....
Cheers,
GB -
Creation of Material using BDC Session method & global class
Hi
Creation of Material using BDC Session method & global class by using oops.
can anyone plz help me outHi,
it looks like it's not possible to call this BAPI wihtout material number. Here is a quote from BAPI documentation.
When creating material master data, you must transfer the material
number, the material type, and the industry sector to the method. You
must also enter a material description and its language.
Cheers
Maybe you are looking for
-
Getting name of file in an email attachment
I have a sender mail adapter that has been configured to pick up emails with file attachments from a mail box. The mail adapter passes processing onto the PayloadSwapBean and then onto a customised module that processes the file attachment (a CSV fil
-
Google API font not working in all places
Hi guys, I'm working on a site and on one of my pages, google's api font will only work on one header (I have them as a paragraphs) in safari. I've only checked firefox and they look fine there. I'm unable to find a fix or a discussion about this iss
-
Why won't my iPhone sync with iTunes? I have just switched from Vista to Windows 7.
I 'upgraded' from Vista to Windows 7 and now iTunes won't recognize my phone or iPad. I have tried uninstalling and reinstalling iTunes; I have gone into device manager to check that the drivers for the phone are up-to-date and, apparently, they are.
-
Does apple make a longer charging cable for ipad
Looking for a longer cable for charging my IPad. While traveling recently I thought I saw a gentleman with what looked like a small white device with a power cord attached to it and it seemed like he had his iPhone and iPad plugged into it. Does anyo
-
Remote Desktop connection - Set URL by group policy
on our 2008 R2 DC we do not have a "RemoteApp and Desktop Connections" entry and so i cant set the Default URL of the RDS web , how i can have an admx for this policy or any work around in order to set the URL by group policy, by the way i have an rd