Bdoc validation error- BP replication CRM to R/3

Hi,
We are trying to replicate BP from CRM to R/3 after creating the BP with all required fields excluding sales area with classification Customer the BP flows to R/3 but on checking in Smw01 a bdoc is found in error state with the following errors:
1)No central data for partner DEA725E5C30D4CF1A1C8005056B92270/4000000079 in the required database activity U
2)Business Partner 4000000079 is Currently Being Processed
3)Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.
on reprocessing the same bdoc it shows confirmed (fully processed)
Please let me know why this error occurs an dhow it can be resolved.
Regards
Prathiba

Hi Prathiba,
   I assume your BP is replicated to R/3 here, when its trying to send the confirmation from ECC to CRM, this BDOC is failing. This fail is due to one small GUI setting in BP transaction.
Check and Maintain Below setting.
1.     In CRM, go to transaction BP.
2.     From the main screen, go to the menu bar at the top of the screen and select Extras u2013 Setting.
3.     When the window below displays under the heading u201CType of Processing for Business Partneru201D select "Display". I assume your user had "Change" or "Setting Last Selected."
Regards,
PBP.

Similar Messages

Bdoc under the status - Bdoc validation error

Hi -
I have been working on replicating materials from R/3 to CRM. The replication was working fine. Then I decided to extend the Bdoc by adding custom fields on both r/3 and crm. On R/3 side I added new sub screen and maintained a Z-table for holding the values.
In CRM side I extended the product by assigning new set type and attributes.
On the R/3 side I'm pushing the data to Bdoc on the T_OTHER_INFO table using the BADI CRM0_200 - > pointing Function Module - Z_SEND_PROD_TO_CRM .
On the CRM side, I was using the BADI Product_customer2 and the method - MAP_R3_TO_CRM_MATERIAL. Here I'm able to find the values populated on the T_other_info table of the BDoc.
I'm Just passing these values to the cs_product_bdoc-data-zmatmas table and cs_product_bdoc-data-mnt_settype .
But once a material is changed on R/3 and when a Bdoc was trying to post, I'm getting a status for the Bdoc on CRM as - BDoc validation error.
Do I need to activate anyother BADI's for enhancement of BDocs?
Thanks for your advise.
James...

Basically i understand your question as, you need to send Equipment status changes from R/3 to CRM. In R/3, you cannot create BDOC.It only extracts the data and send the details as Queue. So Pls use FM CRS_EQUIPMENT_EXTRACT to send the data as queue. In CRM it will create BDOC and do the necessary posting.

Bdoc validation Error - SMW3 - 18

Hi ,
I am stuck with initial upload of a Condition Object.
Tcde: R3AS
Now data is being uploaded in CRM table correctly, which is sent by R/3 backend system.
But all Bdocs are in Red state with Error status( Bdoc validation error SMW3 message no 18).
What i understand here is: This is because:
Example:
Records in R/3 table = 413
And block size set in tcode: R3AC5 is: 50
Initial upload, No. of Bdoc rcvd in CRM = 9 ( i.e 413/50 )
In R/3 there was only one record out of 413 which was changed which lies in any of these BDocs, altough R/3 is sending all the records in table i.e 413, so none of these BDocs was completely uploaded in CRM tables, only one block of one of these Bdoc was uploaded.
For that reason all these BDocs are in RED state.
When i tried to find Error message in Validation function module, I found that with in Validation module there is call for method cl_smw_mflow=>process_outbound
and with in Global class CL_SMW_MFLOW i performed a global search for this message and, there is attribute C_BDOCSTATE_ERRVALI which is responsible for the error.
and this is being set on condition partial upload allowed or not.
If someone have any idea about this, please response..
Or else if someone knows if there is any possibilty to debug the code during initial upload that could help me alot..
Vijay

this is the BDoc error
this the error trace
and this is the BDocs msg error/receivers
thanks

BDoc validation error

Hi Experts,
I am getting the following error in SMW01.
State: Red
Bdoc State Decsription: BDoc validation error
BDoc type: BUPA_MAIN
Flow context description: mBDoc validate
Sender Site name:OLTP
Queue Name: R3AD_CUSTOME.
Please help.
Regards,
Soumya.

this is the BDoc error
this the error trace
and this is the BDocs msg error/receivers
thanks

Bdoc Validation Error "No categories assigned to the product".

Hi Experts,
I have two issues:-
1. I am using "Equipment" Adapter(R3AC1) to Extract one Equipment from R/3 to CRM server. And when I execute the initial Load(R3AS), it got start successfully but when I checks in SMW02, Bdoc type "R3AI_EQUIPMENT" is showing the error . the Message is "No categories assigned to the product" Msg No. is "COM_PRCAT032". How to fix this issue.
2. I want to know from which table the Category Id of Equipment is coming from R/3and in which table it is going to store in CRM database table. also using one BAdi (CRM_EQUI_LOAD_STDIMP) for Category determination.
Pl. help
Thanks in Advance
Ankit

Please post in CRM forums. You will find better answers.
Regards,
Prateek

Customer replication (ECC - CRM), masses of Bdocs in error

Hello
I recently got my hands on CRM 5.0 where replication of customers from ECC to CRM should be set up.
There is no replication from CRM to anywhere else.
Based on my very limited CRM experience, it seems that delta download is running ok.
However there are hundreds of thousands Bdocs in error status and almost all of them seem to have same kind of errors: "Business partner with GUID xxx does not exit" and "Validation error occurred: Module CRM_BUPA_MAIN_VAL, Bcod type BUPA_MAIN".
It's of course possible to track down the cause of error and process the Bdocs one by one but what about the huge mass of hundreds of thousands of Bdocs? Any suggestions / ideas for this are highly appreciated.
Thanks!
Cheers
Mark

Dear Mark,
Please consider the information of note 757955 regarding transaction
CRMC_BUT_CALL_FU, you may have more entries for the events than described
in this note. This should be the reason for the errors in the BDoc.
This note explains the necessary customizing settings.
Another reason might be inconsistencies, so please check the reports in notes 703322,
609766
Regards, Gerhard

"Error in validation" in order replication from ECC to CRM.

Hi,experts,we always have a problem,that is the "Billed" status can not be replicated to CRM from ECC(We excute billing in ECC).
In the BDOC we always have error message "Error in Validation (Details: transaction SMW01)".
I found the preceding contract of the order had been locked by the middleware user.
Is it related with the BDOC validation??
Can anybody suggest?
Thanks.
Jerry

Hi,
Please unlock Queue using SMQ1 ( Outbound ) & SMQ2 (Inbound Queue)
First try using SMQ1 & SMQ2 in CRM then try in ECC.
Regards,
Rajendra Sonawane

BDOC - BUS_TRANS_MSG error in SMQ2 and SMW01

Hi All,
*When checked the Inbound queue (SMQ2) in CRM it shows this error for one sales order
.R3AD_304289786           11.11.2010 06:08:30 Error in Validation (Details: transaction SMW01)
*then when I check the error in SMW01 it shows this..* Error code is F05 in SMW01
Processing of document with Guid DFF206DE9B8CFFF1A7730024E84DD2E3 is canceled     CRM_ORDER     11
Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG.     SMW3     18
I tried to re-process, but it still gives the same error..
how do I correct the error ? how do I fix it...? and re-process the BDOC.
any guidance...
Thanks
Ken

Hi Rohit,
where do I need to check the middleware settings... for R3AD*...in tbale SMOFPARSFA??
we are using CRM 2007.
Some time some sales orders are transfering from ECC6 to CRM without that error (succesfully) only some sales orders get that error....
any other area I need to check....?
Some of the entries in that tbale...
R3ACOMMON     SWITCH_OFF_LENGTH_CHECK     CDBC_TB039B     SPRAS
R3A_BILL     CRM_DEFAULT_DESTINATION_DIALOG     CRM_BILLING_FOREIGN
R3A_CMP     COMPARE_BLOCKSIZE
R3A_COMMON     CRM_AUTO_DELTA_EVENT_ACTIVATION
R3A_COMMON     CRM_R3OLTP_ACTIVE
R3A_COMMON     MAX_PARALLEL_PROCESSES
R3A_COMMON     WAIT FOR UPDATE     RESPONSE_DLV
R3A_COMMON     WAIT FOR UPDATE     SALESCONTRACT
R3A_SALES     BEHAVE_WHEN_ERROR
R3A_SALES     INT_NUMBER_ASSIGNMENT
R3A_SALES     PRICINGTYPE
R3_CRM     R3_CRM_SERVICE_SYNCHRONOUS_CALL     BOM
R3_CRM     R3_CRM_SERVICE_SYNCHRONOUS_CALL     BUPA_MAIN_20C
R3_CRM     R3_CRM_SERVICE_SYNCHRONOUS_CALL     BUPA_REL_20C
R3_CRM     R3_CRM_SERVICE_SYNCHRONOUS_CALL     CONTACT
R3_CRM     R3_CRM_SERVICE_SYNCHRONOUS_CALL     CUSTOMER
R3_CRM     R3_CRM_SERVICE_SYNCHRONOUS_CALL     MATERIAL
R3_CRM     R3_CRM_SERVICE_SYNCHRONOUS_CALL     SERVICE_MASTER
thanks,
Ken
Edited by: KenPerera on Nov 18, 2010 7:22 AM

Validation error : Business Partner currently being processed

Hi,
Can anyone suggest a solution for the following error.
Business Partner is created thru transaction BP in CRM.
The newly created Business partner is saved and after coming out of
transaction ,When we checked BDOC status in SMWO1 for BUPA_MAIN
Object , it gives following errors:
1) business partner xxxx is being processed by xxxx ( user )
2) validation error occurred :Moodule CRM_BUPA_MAIN_VAL ,BDoc type
BUPA_MAIN
We found BP gets created successfully in R/3 side even though above
error occurred.
When we reprocessed the error message in SMWO1 , it is processed
successfully ( status "green" )
Pl. suggest a solution.
Thanks in anticipation !
regards,
Prashant

Hi Jashwanth,
Tried the mentioned note but still problem persists.
Pl. suggest !!
regards ,

Error while changing CRM Sales Document in R/3

Hi All,
I have done the download of customizing, condition & business objects in CRM 4.0.
Now when I create a sales order in CRM, it gets replicated in R/3. I can see the order in tcode VA03.
But when I try changing the same sale order in R/3 using tcode VA02, I get the following error:
"Sales document &1 (5001169) is currently being processed (by user RFCUSER)"
Would appreciate help from the group.
Many thanks !

Hi Krishna,
The middleware user is locking the order so the document has not distributed through the system properly.
Try looking at the inbound queue (transaction SMQ2) and outbound queue (SMQ1) for errors. Also look at the BDocs in error (SMW01).
When CRM sends an order to R/3 it waits for a confirmation to be returned, looks like the problem is here, maybe in your delta downloads not being set correctly.
Cheers
Andrew

Validation error 'Item not found' in Middleware

Hi,
In the middleware monitor, I have some bdocs failed with the validation error ' Item was not found. Validation error occured. module CRM_DOWNLOAD_BEA_VAL, BDoc Type BEABILLDOCCRMB'.
When i look at the document numbers associated , they do exist.
It is in this state for a long time.
Can anyone help.
Regards,
Pratima

Hi Venkat,
There are no messages in the outbound or inbound queue releated to these bdocs.
These bdocs exist only in the monitor with validation error.
Regards,
Pratima

"Error issuing replication: 8453 (0x2105)" when doing a repadmin /syncall

Whenever I do a repadmin /syncall I get "CALLBACK MESSAGE: Error issuing replication: 8453 (0x2105):"
If I do a repadmin /syncall /P the command completes with no errors
I am running this command from the only FSMO roles holder for my domain
This is also in our hub office which all of our branch offices connect to.
I was going to run "repadmin /syncall /e /P" to immediately replicate changes to all of our DCs, but I want to be sure this won't break anything.
I found two warnings in the following Microsoft article that worry me:
http://technet.microsoft.com/en-us/library/cc811569(v=ws.10).aspx
"These are very powerful subcommands and should be used sparingly as they do not follow replication agreements that are in place and have the potential to cause replication storm and break Active Directory if not used properly."
for the /syncall switch:
"Use this command and the above flags cautiously or you can damage the replication system because this command does not follow replication agreements nor honor any replication restrictions such as DISABLE_INBOUND_REPL or DISABLE_OUTBOUND_REPL"
Is running this command safe or will I cause problems by doing this? I was thinking that because this is the FSMO roles holder doing a /P (push) to the other DCs from this one would be ok.
I should also add that doing a "repadmin /replicate" to any DC executes without any errors.

Can you post the dcdiag /q,repadmin /replsum and repadmin /syncall details of DC's to analyse the same.Please use skydive to post the log
"Error issuing replication: 8453 (0x2105):" This can either be a DNS misconfig,secure channel between DC broken,lingering object issue or network connectivity issue,necessary ports are not fully opened between locations,etc. Microsoft's PortQry tests specific
AD ports and the ephemeral ports, and the required responses from the services on the required AD ports it specifically scans for. Here's more info on the ports that AD requires to properly communicate:
Active Directory Firewall Ports -
http://msmvps.com/blogs/acefekay/archive/2011/11/01/active-directory-firewall-ports-let-s-try-to-make-this-simple.aspx
Also, disable local windows firewall service, by default it is enabled in vista/windows 2008 and above. Check the network connectivity and latency.
Disable Windows Firewall:
http://technet.microsoft.com/en-us/library/cc766337(WS.10).aspx
Also ensure the following DNS setting on DC:
1. Each DC / DNS server points to its private IP address as primary DNS server and other remote/local DNS servers as secondary in TCP/IP properties.
2. Each DC has just one IP address and single network adapter is enabled.
3. Contact your ISP and get valid DNS IPs from them and add it in to the forwarders, Do not set public DNS server in TCP/IP setting of DC.
4. Once you are done, run "ipconfig /flushdns & ipconfig /registerdns", restart DNS and NETLOGON service each DC.
Do not put private DNS IP addresses in forwarder list.
5.Assign static IP address to DC if IP address is assigned by DHCP server to DC.It is strongly not recommended.
Hope this helps.
Best Regards,
Sandesh Dubey.
MCSE|MCSA:Messaging|MCTS|MCITP:Enterprise Adminitrator |
My Blog
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

BUPA_REL BDOC's from ECC to CRM BP Contact PersonRelationship DATES wrong

Hello SDN community,
BUPA_REL BDOC's - from ECC to CRM - BP Contact Person Relationship (BUR001) - Valid From & Valid To dates are not replicating correctly.
Within ECC,
when a Business Partner's Contact Person relationship (BUR001) is modified, such that one relationship is ended
and the "Valid To" relationship is set to todays date (ie. 20/01/2012).
AND then another Contact Person relationship is created for the BP, with a Valid From date that is set to tomorrow (ie. 21/01/2012) and
the Valid To date is set to 31.12.9999.
THEN the BDOC processing occurring in CRM is setting the relationship dates in CRM incorrectly.
ie. The VALID FROM date is set to 01.01.01 and
the VALID TO date is set to 31.12.9999.
Does anyone have any ideas/solution for this or a similar experience?
Thanks in advance
Andrew Clarkson

Hi, Andrew Clarkson
1630644 - No validity period in standard contact person relationship
This is SAP standard behaviour
Due to technical reasons, the partner function assignments are not time-dependent and the validity period of the contact person relationship cannot be considered by the automatic partner determination in the CRM applications. Therefore the maintenance of the start and end for the contact person relationship in CRM is deactivated in the standard system.
A possible workaround is to use a customer-defined relationship category (copy of standard), which can be customized without any limitations.
Regards,
Denis

Identify cause bdocs in error

We are working trough several bdocs in error (smw01) (BUPA MAINS , MRKTPROF) and so on .
Unfortunately it is quite troublesome to find the exact cause of the errors.
Can we use the following guidelines in order to detect errors or does anybody see any objections in this way of working :
<b>Go to transaction R3AC1 (Business Objects) R3AC3 (Customizing Objects) or R3AC5 (Condition objects) depending on what you are downloading.
Select the appropriate business object and go into change mode. On the header is a field called Block Size. Set it to 1 and save. Say no to the question of whether you wish to put it into a transport.
Now do your download. Monitor the download until it freezes. Go to SMQ2 and double click on the download queue of the object. It should be displaying the BDOC in error. Now you can look at the error message and the data and work from there.</b>
Thanks for your input.

Hi,
Check table CRMKUNNR in R/3 with the GUID. Get the customer number and run syncronization request with the customer number.
Make the following test for 1 BP which is in error for the moment :
- check if you have one entry in CRMKUNNR for your BP
- if yes, delete it
- send the BP back using a request or changing your filter in your adapter object and restart it via R3AS
- check in SMW01/SMQ1/SMQ2 if BP is saved in CRM
Regards,
Amit

Read-only radio group losing value on validation error

It took quite a while to track this down, but I think I've got it narrowed down properly. I have an APEX form for updating a record in a databse table with a radio group which is conditionally read-only. If that radio group has a value AND is read-only, when the form is submitted and hits a validation error, the value of the radio group is lost.
For example, the radio group SUBMITTED_FOR_APPROVAL is set to Y and is read-only for a given user. That user then changes something else on the form and submits it. However, the form now hits a validation error for some field. When the form reloads with the validation error displayed, all the fields are restored except the read-only radio group which is now blank. If a select list is used with the identical read-only condition, it works fine. Likewise, if a radio group is used, but the read-only condition is removed, it works fine. It is only when it is a radio group and it is read-only, that the value does not appear to be submitted to the session with all the form values whent he form is submitted.
Is this a bug or am I simply missing something?
Apex 3.1.2
Rgds/Mark M.

It's using a shared component LOV cleverly called LOV_YN which consists of a static LOV with
1 Display=Yes, Return=Y
2 Display=No, Return=N
The settings in the LOV section on the item iteself:
Named LOV: LOV_YN
Display Extra values: No Dynamic translation: Not translated
Number of columns: 2 Display null: No
Null display value is blank as is null return value
Item was setup as a radio group and was only converted over to a select list to work around this issue. Let me know what else you need and thanks again.
Rgds/Mark M.

Bdoc validation error- BP replication CRM to R/3

Similar Messages

Maybe you are looking for