BEA AL Notification Service and BEA ALI Notification
Hello,
We upgraded our Collaboration to 10.3.0 - now we have to services - BEA AL Notification Service and BEA ALI Notification. Which should I keep - or should both be enabled?
Thanks,
V
We kept the AL Notification Service and deleted the other one.
The AL Notification Service properties point to:
C:\bea\alui\common\wrapper\3.2.3\bin\native\win32\wrapper.exe -s C:\bea\alui\cns\1.0\settings\config\wrapper.conf set.PLATFORM=win32 set.COMMON_PATH=C:\bea\alui\cns\1.0\bin\..\..\..\common set.APPLICATION_PATH=C:\bea\alui\cns\1.0\bin\.. set.WRAPPER_PATH=C:\bea\alui\cns\1.0\bin\..\..\..\common\wrapper\3.2.3 set.JRE_PATH=C:\bea\alui\cns\1.0\bin\..\..\..\common\jre\1.5.0_32 set.WRAPPER_NATIVE_LIB_PATH=C:\bea\alui\cns\1.0\bin\..\..\..\common\wrapper\3.2.3\lib\native\win32 "set.JVM_1=-server -Xms160m -Xmx320m" set.BIT_MODE=
Vivekvp wrote:
Hello,
We upgraded our Collaboration to 10.3.0 - now we have to services - BEA AL Notification Service and BEA ALI Notification. Which should I keep - or should both be enabled?
Thanks,
V
Similar Messages
-
Unable to Sign In into presentation services and online RPD obiee11.1.1.3.0
Hi,
I am using OBIEE11g (11.1.1.3.0) on Windows 64bit server, suddenly i have problem i could not able to login my Dashboard and RPD (online mode) [i.e: i am able to login offline mode in RPD] but Weblogic console and EM and OPMN all services are up .
Please check the below error:in RPD
http://imageshare.web.id/images/ra9qhx8pm4liwsk1rexd.jpg
In EM:
http://imageshare.web.id/images/y06x8bu0huhoisyqy718.jpg
while testing DSN also error
http://imageshare.web.id/images/zgq47suhrjabe3ye2ck.jpg
Last few months ago i have faced the same issue ..then i resolved below method
Unable to Sign In into presentation services and RPD obiee 11
Issue :I had a trouble to login into RPD (online mode) the Presentation services lately.
It was working fine before and after changed console user sequrity things changed and was having issues to login lately after that.
It always gives me invalid username/Password was entered message when I tried to login no matter what ever username I tried.
I was able to login into Enterprise manger and Weblogic Admin console successfully with out any issues. All the processes are up and running with out any issues.
Tried rebooting successfully and still it wont let me login into Answers. So I tried if i could login into Admin tool and it wont let me login there as well.
So I created new Admin user in the Weblogin console and tried to login using the new user and still no luck. The new admin will let me login into the EM and WLC but not into Answers and rpd.
I tried deleting old references of the user directories in the catalog and still no luck.
It has something to do with the credential store. What ever user name I created its not mapping it to the Answers/rpd inspite of both the services are running
Solution:
======
1. Please follow instructions given in
How to fix “Unable to Sign in. An error occured during Authentication" error when a user logs in OBIEE 11g (Doc ID 1302924.1) step by step, for those steps you have done, please double check and make sure what you've done are correct.
2. You are still not able to logon because you have missed a few steps as the following:
8. Edit the NQSConfig.INI file to reset the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS = YES to NO and restart the Oracle BI Servers.
9. Remove, set to none, or comment out the line (see UpgradeAndExit in the following example) added to the instanceconfig.xml file (that instructs Oracle BI Presentation Server to refresh GUIDs on restart).
10. <ps:Catalog xmlns:ps="oracle.bi.presentation.services/config/v1.1">
11. <ps:UpgradeAndExit>false</ps:UpgradeAndExit>
12. <ps:UpdateAccountGUIDs>none</ps:UpdateAccountGUIDs>
13. Restart the Presentation Server for the instanceconfig.xml file that was updated.
14. Make sure Oracle WebLogic Server and the system components are also running, if they are not running, restart them.
b) Relogin as the problematic user to verify if you still see the “Unable to Sign In” error
Step 2 : Delete user from rpd if present
a)Launch admin tool and open rpd in OFFLINE Mode
b)Click Manage > Identity > Users tab to verify if you see this user present
Note : Normally you will only see list of users when you open rpd in ONLINE mode. Unless the users were created manually in rpd, no users should be visible in OFFLINE mode
c)If the user is present, delete this user entry from rpd
d)save rpd and deploy this changed rpd using EM
e)restart OBI Server component
f)relogin as the problematic user to see if you still see “Unable to Sign In” error
Step 3 : Delete the cacheduserinfo file from webcatalog
If Step1 and Step2 does not work, then do the following
Note : In the example below, catalog name is SampleApp and the user who gets “invalid Login” error is Administrator user.
a)Take a backup of your webcatalog
b)Navigate to C:\OBIEE11G\instances\instance2\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog\SampleApp\root\users\Administrator\_prefs
c)Delete the files name cacheduserinfo and cacheduserinfo.atr
d)Launch OBIEE 11.1.1.3 and test by logging in as the specific user.
the best one is 3rd one.
but the above all methods also not working
Kindly check and help me on that ...
Thanks
devaHi,
errors in \user_projects\domains\bifoundation_domain\servers\AdminServer\logs?
####<Sep 5, 2011 5:24:31 PM SGT> <Info> <Socket> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214671768> <BEA-000436> <Allocating 3 reader threads.>
####<Sep 5, 2011 5:24:31 PM SGT> <Info> <Socket> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214671770> <BEA-000446> <Native IO Enabled.>
####<Sep 5, 2011 5:24:32 PM SGT> <Info> <IIOP> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214672013> <BEA-002014> <IIOP subsystem enabled.>
####<Sep 5, 2011 5:24:34 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214674424> <BEA-090894> <Successfully loaded the OPSS Policy Provider using oracle.security.jps.internal.policystore.JavaPolicyProvider.>
####<Sep 5, 2011 5:24:34 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214674990> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675109> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_ACmZIP/2hHMOMnTCnE4XU/CV4wQ=>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675232> <BEA-090516> <The Authenticator provider has preexisting LDAP data.>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675666> <BEA-090516> <The Authorizer provider has preexisting LDAP data.>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675832> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Top".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675876> <BEA-000000> <Parsing class "com.bea.common.security.store.data.DomainRealmScope".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675880> <BEA-000000> <Parsing class "com.bea.common.security.store.data.RegistryScope".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675881> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PKITypeScope".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675881> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLTypeScope".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675882> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLPartner".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675882> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Credential".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675883> <BEA-000000> <Parsing class "com.bea.common.security.store.data.CredentialMap".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675884> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLEntry".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675887> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLAssertingParty".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675891> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLRelyingParty".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675893> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PasswordCredential".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675893> <BEA-000000> <Parsing class "com.bea.common.security.store.data.UserPasswordCredential".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675894> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PasswordCredentialMap".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675895> <BEA-000000> <Parsing class "com.bea.common.security.store.data.ResourceMap".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675896> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PKIResourceMap".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675896> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSCertRegEntry".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675897> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSCredMapCollectionInfo".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675898> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSPolicyCollectionInfo".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675899> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSRoleCollectionInfo".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675900> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLAuthorizationPolicy".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675900> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLRoleAssignmentPolicy".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675902> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Endpoint".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675903> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Partner".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675904> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SPPartner".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675906> <BEA-000000> <Parsing class "com.bea.common.security.store.data.IdPPartner".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675908> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SAML2CacheEntry".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675909> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SchemaVersion".>
####<Sep 5, 2011 5:24:36 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214676507> <BEA-090516> <The CredentialMapper provider has preexisting LDAP data.>
####<Sep 5, 2011 5:24:36 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214676523> <BEA-090516> <The RoleMapper provider has preexisting LDAP data.>
####<Sep 5, 2011 5:24:36 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214676732> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server AdminServer for security realm myrealm.>
####<Sep 5, 2011 5:24:36 PM SGT> <Notice> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214676733> <BEA-090082> <Security initializing using security realm myrealm.>
####<Sep 5, 2011 5:24:36 PM SGT> <Critical> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214676930> <BEA-090404> <User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.>
####<Sep 5, 2011 5:24:36 PM SGT> <Critical> <WebLogicServer> <W01BGPCBIAPP1A> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1315214676932> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
weblogic.security.SecurityInitializationException: User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:1009)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
####<Sep 5, 2011 5:24:36 PM SGT> <Notice> <WebLogicServer> <W01BGPCBIAPP1A> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1315214676974> <BEA-000365> <Server state changed to FAILED>
####<Sep 5, 2011 5:24:36 PM SGT> <Error> <WebLogicServer> <W01BGPCBIAPP1A> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1315214676974> <BEA-000383> <A critical service failed. The server will shut itself down>
####<Sep 5, 2011 5:24:36 PM SGT> <Notice> <WebLogicServer> <W01BGPCBIAPP1A> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1315214676977> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<Sep 5, 2011 5:24:36 PM SGT> <Info> <WebLogicServer> <W01BGPCBIAPP1A> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1315214676988> <BEA-000236> <Stopping execute threads.>
Thanks
Deva -
How can I synchronize directory service and bpm engine?
hi,all
I'm using bpm WL 10.3.1 with papi.
Now I want to assign role to participant in process.
I use DirHumanParticipant.setRolesAssignment() and DirHumanParticipant.update() to assign role dynamically.
But it does not work.
Actually, when I log in to the webconsole. The role has assigned to the participant.
but when I log in to the workspace. I cannot find expect task in my work items.
In the history view I can find it.
Then I remove the role that i assigned previous and assign again in the webconsole.
After that I log in to the workspace, now i can get the expect task in my work items.
I think it need to synchronize between directory service and bpm engine. but I don't how to do it?
Is there any way to do it with some api?
thanks
regards
kenshinHi!
Here is how it works:
1. The engine polls the directory periodically and checks if some changes were made to the participant role assignments.
The poller frequency is configured on the Process Administrator.
2. When a change is detected, the engine updates the information on the engine partcipant cache.
However, if the participant is logged it, the update operation is postponed until the participant logs off.
3. After checking the directory, the engine directory poller sends a notification to all the PAPI clients (including the Workspace)
and the workspace side poller updates the participant assignment you see in the workspace.
The notification mechanism is using the JMS Topic on the JEE version of the BPM.
- First of all verify you are logged out when you add/remove the role.
After that, wait 1 minute or the time specified in the Process Admin as the directory poller frequency.
- Verify the JMS Topic is defined correctly. Check the engine log for any JMS Topic related error.
Hope it helps. -
Bad XML from external web service and would like to change the content
I am getting a bad XML(not valid) from external web service and I would like to change the content of the body in OSB proxy service to make it valid.
For example
<g:Information xsi:schemaLocation="http:// bad schema" xmlns:g="http://abc.com/t.xsd">
<test>Test Data</test>
</g:Information>
should become
<g:Information xmlns:g="http://abc.com/t.xsd">
<test>Test Data</test>
</g:Information>
Do you how can I do this?I don't think it would be the best solution but you may try -
1. Conver the incoming XML to string using fn-bea:serialize() function
2. Replace the not-required content with a blank
3. Covert the string back to XML using fn-bea:inlinedXML
If you find any other solution, please let us know.
Regards,
Anuj -
IPhone 6 iOS 8.0.2 lost cellular service and TouchID
Updated my iPhone 6 from iOS 8.0 to 8.0.2 and immediately I'd gotten the same issues which iOS 8.0.1 is having. Lost of cellular services and TouchID does not work.
I have thus reinstall my phone back to IOS 8.0 and by the way, I'm situated in Singapore. Hopefully Apple can thoroughly QA the firmware for individual region before releasing worldwide.I have the exact same issue. iOS downloaded the update for me and gave me the badge notification that it was ready for install. I installed it at 1100 central time (I am in the US) on 26 Sep. Will revert back to iOS 8 when I get to a computer with iTunes.
-
Several months ago, we received three consecutive emails showing porn movie charges which were posted minutes apart from each other. We immediately called customer service and were told that they would put a note and our account and for us to call when we received the bill and they would be credited to our account. The bill came and we called and were told they were being deducted so we deducted them from our payment. We received an email saying our account was overdue while we were out of the country. When we got back we called and were told that they have a record of our talking to two customer service representatives but there was no record of their telling us they would credit the charges. We were told that they will not credit the charges. We asked for the full detail of the charges showing what was watched and the duration of the viewing so that we could match it up with our initial notification of charge emails. The representative said he would send us the information. He sent us nothing. I AM DISGUSTED WITH BEING LIED TO BY YOUR CUSTOMER SERVICE REPRESENTATIVES. WE HAD TWO REPRESENTATIVES TELL US THEY WERE CREDITING OUR ACCOUNT OBVIOUSLY ONLY TO GET RID OF THE CALL. WE DO SCROLL THE CHANNELS BUT NEVER USE PAY PER VIEW. THE FACT THAT THESE ARE THREE CHARGES MADE IN A MATTER OF MINUTES SHOULD SHOW THAT IT IS A MISTAKE. IT SHOULD WORK THE SAME AS WHEN YOU GO TO HBO AND HAVE NOT SUBSCRIBED; IT SHOULD REQUIRE FURTHER ACTION TO INCUR CHARGES. WE HAVE NOW REMOVED ALL PAY PER VIEW PURCHASE CAPABILITY FROM OUR SYSTEM. THE WAY IT WAS YOUR TODDLER COULD HIT THE REMOTE AND INCUR CHARGES.
I'm sorry you are having difficulty. An agent with access to your account will reach out to you directly by email, private message in the Forums and/or the billing telephone number on your Verizon account for more information or to help you resolve your issue.
-
Can I turn off Cell Service and just use GPS
I want to use my iPhone 5 with only GPS activate for when I run with various apps.
I no longer have a cell account on this phone since I just bought an iPhone 6. I don't want my phone to keep searching for service and running down the battery plus the annoying notification "Phone is not Activated. Is there a way to turn off everything (including phone service, not just data) except the GPS?
Thank you...So, in theory, when I can use WiFi, it should not be running up data usage against the 3G plan that I pick...correct?
-
What are mapping services and why they use so much cellular data?
I previously had an iphone 5 and my monthly cellular data consumption was about 250MB.
I recently switched to an iphone 5S and the cellular data usage is about 250MB per week!
I try to monitor and reduce the usage but the mapping services in system services is always very high!
What is this? Can I reduce it?Mapping Services ( story ) :
In April 2011, iPhone and iPad users were surprised to discover that, not only was their device keeping track of where they’d been, it also was storing very detailed location information in a plain-text file on the phone. The data was derived by the cell towers and Wi-Fi hotspots the devices encountered, and was added anonymously to a crowdsourced database.
Apple later said the devices were keeping more information than intended due to a bug, and issued a patch that reduced the amount of data. But, because it was used to improve and speed up location services, the practice continued.
And now, in iOS 7, Apple has added a tool that lets you see what your iPhone knows about where you go.
If you’ve got an iPhone 4S or later running iOS 7, follow these steps:
1. Go to Settings, then Privacy > Location Services.
2. Scroll to the bottom of the list of apps that use Location Services (and feel free to marvel at how many apps do!). Tap System Services.
3. Tap on Frequent Locations, then scroll down and look at History. You’ll see at least one city there, more if you travel.
4. Tap a city. You’ll see a list of locations you’ve visited in the city.
5. Tap a location. You’ll see a list of the dates and times you visited that location.
Why in the world would Apple collect this kind of detail about your movements? It does so to enable features like Next Destination, found in the Notification Center, which is the screen you see when you swipe down from the top of the iOS display. Next Destination looks at your travel patterns and offers information about how long it will take to get to the next place you typically visit during the day.
If having all this location data collected by your iPhone makes you nervous, you can turn it off at Settings > Privacy > Location Services > System Services > Frequent Locations. Note that it is turned on by default, so if you don’t want your phone logging your whereabouts, you’ll need to turn it off.
The Next Destination feature is similar to one found in Google Now, which uses location and your habits to offer up useful information without your asking for it. Google Now is found in the Google Search app on both Android and iOS. On Android, you can add a Google Now widget to your home screen to make the feature more accessible.
In fact, Google collects similar information about you – and in greater detail - if you use its location-based products. Google stores your location data on the Internet, and you can see it on any Web browser.
Make sure you’re logged into your Google account – say, through Gmail – and then go to google.com/locationhistory. You’ll see a map showing location visits for today, but click the Dashboard link at the top of the page and you’ll see this:
To turn this off, click the gear icon in the upper right corner of the Location History page and choose History Settings. Then, click Disable and Save. There’s also a History Management link that lets you delete history items that have already been collected.
Location services are really an integral part of a ton of iOS apps, using the internal GPS system to add Instagram photos to a map, checkin with FourSquare or Facebook, or let your friends know where you are with one of many “on my way” apps, like Glympse or Twist.
If you’re battery is dying, however, the location services are the first thing you should turn off, as they suck up a lot of your iPhone, iPad, or iPod touch’s power needs, what with their background data sending and receiving and such.
Here’s how to turn them off.
Tap your Settings app to launch it, and then tap on Privacy. You’ll be able to turn the toggles OFF for any specific app that has privileges to access your GPS location by scrolling through the list and tapping them all. I do this on a fairly regular basis for both privacy and battery savings. I figure that with less apps accessing my location, the less battery power in total is being used for that function.
If you want to turn off Location Services completely, then simply tap the main toggle at the top to OFF, and you’ll stop using them. This will keep your apps that need it, like Maps or Compass, from knowing where you are, but the battery will thank you.
Follow the above steps to turn off Location Services : -
Representing SOA/Composite service and operations
Which diagram/diagrams do you recommend for depicting a SOA/Composite Service and their operations?
Example:
We have a process function "Mutual Acceptance" that requires customer data,
which is in another software module for handling customer master data.
The service is called "Manage Customer" and the operation "Query Customer".
I am thankful for any input, best regards Fredrik.Hi Fredrik,
Just some quick notes regarding this complex theme.
To describe the relationships of a business service to other architecture elements create a Business Service Allocation model for each Business Service. Therefore use the diagram type IS Context Model to depict:
* software services implementing the business service
* business data owned by the service
* capabilities
* organizational units
Furthermore Access diagrams can be used to depict a software service with its operations, data input and output, capabilities and roles (as far as notifications or workflows included). An Access diagram gets autoomatically generated while the import of a WSDL. Enrich the diagramm type according to your requirements (for operations you can use the symbol IT Procedure). At the end of the day the model shall serve a descrption for the implementation. Hope this is what you were looking for.
Best regards,
Danilo -
IOS 8.0.2 loss of cellular services and inability to register fingerprint
Have just updated my hours new iPhone 6 plus 16gb to iOS 8.0.2 and have lost cellular service and was also not able to register fingerprint for touchID. resets don't help either. What do I do?
Another observation is that the pop up notifications that come up with settings don't last even half a second. they vanish even without being clicked.
-
Job for httpd.service failed. See 'systemctl status httpd.service' and
Hello,
I am the problem. I change "/etc/httpd/conf/httpd.conf" to install php5 on apache.
sudo systemctl start httpd
Job for httpd.service failed. See 'systemctl status httpd.service' and 'journalctl -xn' for details.
systemctl status httpd.service
● httpd.service - Apache Web Server
Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled)
Active: failed (Result: exit-code) since lun. 2014-08-25 12:19:31 CEST; 1min 18s ago
Process: 2208 ExecStop=/usr/bin/apachectl graceful-stop (code=exited, status=1/FAILURE)
Process: 2433 ExecStart=/usr/bin/apachectl start (code=exited, status=1/FAILURE)
Main PID: 2060 (code=exited, status=0/SUCCESS)
août 25 12:19:31 creaprog apachectl[2433]: httpd: Syntax error on line 66 o...y
août 25 12:19:31 creaprog systemd[1]: httpd.service: control process exite...=1
août 25 12:19:31 creaprog systemd[1]: Failed to start Apache Web Server.
août 25 12:19:31 creaprog systemd[1]: Unit httpd.service entered failed state.
Hint: Some lines were ellipsized, use -l to show in full.
cat /etc/httpd/conf/httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/srv/http"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
#Load php5 module
LoadModule php5_module modules/libphp5.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# PHP settings
Include conf/extra/php5_module.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
Thanks, sorry my english is bad .
Last edited by Creaprog (2014-08-25 10:25:17)I just noticed the exact same thing. It turns out that the httpd-ssl.conf file on my system is still the old v2.2 syntax, which means that the SSLMutex directive is still in there. This is an invalid directive after 2.2.
This is where things get interesting. At first, I simply thought I had forgotten to merge httpd-ssl.conf.pacnew after apache had been upgraded to 2.4. However, when I check my pacman.log, it appears that httpd-ssl.conf was never upgraded when apache went to 2.4 - (2.2.26-1 -> 2.4.7-1). There was never a pacnew file generated to be merged.
I took a look at the apache package via the abs and the "proper" httpd-ssl.conf is certainly in there, so why pacman never created a pacnew file is a mystery.
Anyway, to fix this: pull the httpd-ssl.conf from the apache package, either from your cache, using the abs and building it, or (I think) pacman may re-install it if you move the file to a backup location (not sure about this). Then merge your original httpd-ssl-conf with the new one. -
System Landscape and system alias
Dear All EP Expert,
I have some general questions.
1) If i wanted to connect my EP 7.0 to backend ECC 6. Is there any specific name that i must use for my system landscape and system alias?
2) Is the system lanscape come in when i include the business package?
3) Where can i download the latest ESS and MSS business package?
Can someone assist me on this?
Thanks you in advance...
Regards,
BryanHi Brian ,
you cal also download latest ESS and MSS business packages from -->
download the business package from service market place.
Navigate through Downloads --> SAP Support Package --> Entry by Application group --> SAP Application Components --> SAP ERP --> SAP ERP2005 -->Entry Point by component -->SAP XSS Self - Service --> SAP ESS 600.
and similar for MSS 600 business package.
You cal also refer to this Note for further details about Self Services Business Packages.
[Note 1004528|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1004528]
Hope this helps.
And Regarding System Alias names, there is no such specific name you should keep, as no standard name exists , read more about it on.
[system aliases|http://help.sap.com/saphelp_nw70/helpdata/en/e9/9bc93f92908032e10000000a11405a/frameset.htm]
Also,
System Aliases and SAP Systems
For SAP systems (BW, CRM, and so on), it is recommended to use a system alias that has as its name parameter the logical system name as defined in the SAP system itself. The logical system is specified in Table T000 in the SAP system.
Reward points if helpful
Regards,
Shailesh Nagar
Edited by: Shailesh Kumar Nagar on Jan 18, 2008 11:29 AM
Edited by: Shailesh Kumar Nagar on Jan 18, 2008 11:37 AM -
Publish WebService and Create Alias Name
Dear All,
I created web service and deployed into WAS sucessfully through WebDynpro. Now i can access that webservice through Dynpro application. I didn't publish on
the UDDI Registry.
My problem is in future the the Web service URL might be changed into some other server. So without coding change i have to access new web service URL.
I tried the following way to access _setHTTPDestinationName() method, but i could not see this method.
If try the following way i got only three methods.
1. _setEndPoint()
2. _setPassword()
3. _setUser().
wdContext.currentRequest_RLCWebServiceViDocument_getRoleElement().modelObject().
Can you anybody help how to publish in UDDI directory and create alias name?.
Advance Thanks,
S.Saravanan.Hi,
I was also facing the same problem when I was using NWDS 2.0.9. After it was upgraded to SP 15, the issue got solved.
The method _setHTTPDestinationName() for setting the HTTP Destination name to a modelobject is available in the NWDS SP 15. Pls make a try with this version of NWDS and hope this would solve the problem.
Srinivasan T -
Excel service and OWA - getting ERROR while trying to open/edit Excel documents
Hi All,
We have configured SharePoint 2013 with Excel Service and OWA (Office Web Apps).
After configuring, we are able to view/edit Word or PowerPoint documents from the browser (as OWA is configured). But we are getting errors while trying to open/edit Excel documents.
We are not able to view/edit the excel workbook from the browser (through OWA).
To open the excel in the browser, decision has to be taken at the farm level on what to be used – Excel Service or OWA Server? Is it possible to do setting at site collection level?
Error details are given below:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 3/25/2013 1:29:08 PM
Event time (UTC): 3/25/2013 7:59:08 AM
Event ID: fc2e0530f493493896e6c8b6297a0423
Event sequence: 10
Event occurrence: 3
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/2/ROOT/x-1-130086717598089315
Trust level: Full
Application Virtual Path: /x
Application Path: C:\Program Files\Microsoft Office Web Apps\ExcelServicesWfe\
Machine name: VHYDMANTHSTP-02
Process information:
Process ID: 1252
Process name: w3wp.exe
Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
Exception type: ArgumentException
Exception message: An entry with the same key already exists.
at System.Collections.Generic.TreeSet`1.AddIfNotPresent(T item)
at System.Collections.Generic.SortedDictionary`2..ctor(IDictionary`2 dictionary, IComparer`1 comparer)
at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.GetInstalledUICultures()
at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.IsUICultureSupported(String cultureTag, CultureInfo& cultureInfo)
at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICulture(String cultureTag, Boolean useOleo, Boolean allowCustomFallback)
at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICultureFromFrontEnd(String uiCultureTag, Boolean allowFallback)
at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentCulturesFromFrontEnd(String uiCultureTag, String dataCultureTag)
at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.SetCurrentCulturesFromContext(HttpContext context)
at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.PreProcessRequest(HttpContext context)
at Microsoft.Office.Excel.WebUI.XlPreview.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Request information:
Request URL:
http://mysrevr/x/_layouts/xlpreview.aspx?ui=en-US&rs=en-US&WOPISrc=http://myservernames1/_vti_bin/wopi.ashx/files/f36d669ceb814d67bdad0e1e1f98e466&wdSmallView=1
Request path: /x/_layouts/xlpreview.aspx
User host address: 10.81.138.92
User:
Is authenticated: False
Authentication Type:
Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
Thread ID: 13
Thread account name: NT AUTHORITY\NETWORK SERVICE
Is impersonating: False
Stack trace: at System.Collections.Generic.TreeSet`1.AddIfNotPresent(T item)
at System.Collections.Generic.SortedDictionary`2..ctor(IDictionary`2 dictionary, IComparer`1 comparer)
at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.GetInstalledUICultures()
at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.IsUICultureSupported(String cultureTag, CultureInfo& cultureInfo)
at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICulture(String cultureTag, Boolean useOleo, Boolean allowCustomFallback)
at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICultureFromFrontEnd(String uiCultureTag, Boolean allowFallback)
at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentCulturesFromFrontEnd(String uiCultureTag, String dataCultureTag)
at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.SetCurrentCulturesFromContext(HttpContext context)
at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.PreProcessRequest(HttpContext context)
at Microsoft.Office.Excel.WebUI.XlPreview.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)I have the same issue while opening the file , i have checked every thing twice. but unable to fix this thing . can any one help.
One more thing which is i am wondering none of the MS representative replied on this post which is originally posted on March 27-2013.
is microsoft alive??
Imran Bashir Network Administrator MCP, JNCIA-EX,ER,JNIOUS +92-333-4330176 -
Apple Customer Service and warranty exceptions
Hello all,
Whilst I love my Apple hardware and software, and have had many good experiences with them over the years, unfortunately I post today with a complaint about what I perceive to be poor customer service and product quality.
In late March/early April of 2006, I purchased a 1.83GHz MacBook Pro with great anticipation- Intel inside, Tiger OS, inbuilt webcam, and general awesomeness all round. I also purchased the 3 year AppleCare warranty, which was to be a godsend as during the following three years I would experience:
*The replacement of the battery under the original MacBook Pro battery exchange program
*The left fan on the unit dying in 2007
*The logic board itself dying in late Feb/Early March 2008, thus bricking my laptop
*Another battery replacement as the replacement for the original died before it (realistically) should have (Apple very nicely made an exception to the battery's 1 year technical warranty and replaced it for me).
Fair enough, it's a new unit and was bound to have some problems. Unfortunately, last week the logic board died AGAIN; a mere 18 months after it was replaced in 2008. The unit is out of AppleCare warranty by 5 months or so, but I was urged by forumites and friends to call Apple, who would surely make an exception for me and pay for the replacement part, given my service history with the laptop and Apple's reputation for excellent customer service.
Unfortunately, this has proved to not be the case. Calling customer service at Apple Australia I talked to Steven, who was firm to the point of rudeness when he stated that my laptop was out of warranty and Apple would cover nothing but the labour charges involved, as a "guesture of good will". When stretched, he offered me a $125 voucher if I wanted to purchase anything over $400 in the Apple store, and stressed he didn't have to do this but the company was attempting to provide good service to its customer.
Despite my argument that I forked out over $3000 for this laptop a mere three years ago and am now looking at over $1000 to repair something replaced only 18 months ago, his line was that Apple provided a warranty and that was simply that (apart from a month or two grace). Five months is apparently "far outside the warranty period".
I received no challenge to my assertion that after buying something which cost over $3000, it was reasonable for Apple to expect a consumer to pay an extra $1000 every year after the warranty finishes to replace a broken logic board. In truth, I find this near incomprehensible, considering one can buy the supposedly inferior build quality of a Dell, HP, Toshiba, etc and see it last not just beyond the warranty but another two or three years before it finally suffers something terminal.
While from a warranty perspective Apple are well and truly within their rights to refuse to pay for the part, at the end of the day I am left to pay $1000+ for a repair for something which may only last another 12 months, plus $3500+ for a new Macbook Pro with AppleCare if I want a replacement- minus of course the $125 they are offering.
I did some reading of the ACCC's website about my statutory rights and the Trade Practices act, and I note the following with interest:
*Statutory conditions (goods)*
The Trade Practices Act implies the following statutory conditions into consumer contracts:
* The goods must be of merchantable quality. That is, they must meet a basic level of quality and performance, taking into account their price and description. They also should be free from defects that were not obvious to you at the time of purchase.
* The goods must be fit for their purpose. That is, they should do what they are supposed to do and be suitable for any purpose that you might have made known to the supplier.
* The goods must match the description you were given or the sample you chose from. For example, any carpet laid must be the same quality and colour as the sample you chose from.
* You must receive clear title to the goods, including goods bought at auction. In other words, you can expect to own the goods outright and any restriction on ownership should be explained to you beforehand.
While I don't particularly want to make a big deal of things, I hardly see $3000+ for three years use and $1000 each year thereafter to be merchantible quality or fit-for-purpose! This is supposed to be a high end laptop with excellent build quality, and yet I've a secondhand iBook that has been chugging for longer without issue than this machine!
I told Steven from Customer Service that his offer didn't satisfy me in the slightest, and still put me in an awkward position with regards to repair and repurchase. He simply wouldn't budge, and refused to see things from my point of view (which another operator, Anu, was able to do and thus produce a much better response from myself). I have since asked to speak to his manager which- after initial resistance- I have been able to secure a future callback from. I have no idea how well discussions with he/she will go.
What I'd like to hear from you guys and girls is your experience with similar situations, and whether you think I've a leg to stand on with regards my replacement request or the ACCC stuff above. Again, I love my Apple products but I hardly think asking them to replace the part while I pay for labour is a big ask, given the service history and my desire to continue buying and using their products.
Love to hear your points of view on this one; thanks for taking the time to read it!
Cheers,
Dave.Dear meacod
I have live the same, except that I Cure my MBP before it goes to die.
A lot of older participants here just talk about Aplle care, which seem the automatic thing in front of a lack of real good quality on Apple products .
But I think we pay the price, and my second hand MBP was much more expensive than a brand new PC with more ram, more Hard disk, and even a blue ray...
I don't know your mbp history, but that's sure that we are not equal, in world, with Apple customer support. France is not so great, I don't know for your country.
The only thing I think is that Apple should take care of us, as we have some unacceptable issues, for An Apple Product...
Since 1996, when Apple was almost dead, saved by Bill Gates investment !!! , I have every year promote it, and it was not easy, but I have bring to Apple between 3 to 10 customers each year..
since One year, I have stop that, because I don't believe anymore in Apple product's superiority .
Oh, yes, on the paper, it's better, the system is really good. But the overall experiment can be so bad that I don't want to loose friends, or customers...
I don't say it's always bad : I just say that it CAN BE SO BAD and that Apple DON'T take care of that...
so, for your computer, open it, check it a lot, may be it's too late, but for instance, you talked about a fan, I have solved that case just by putting oil on the fan's axe...
good luck
Maybe you are looking for
-
Optical audio and the iPad headphone jack
I have an optical audio cable going into my tv sound system - will an the iPad sound connect to this thru the headphone jack? I can not play sound thru my iPhone, but can thru my iMac.
-
Why I cannot open my email appendix pdf
Why I cannot open my email appendix pdf
-
Ouicktime doesn't play my mpegs??
I have uploaded mpegs from a Sony Camcorder but my macbook doesn't seem to play the mpeg files..help? It says quicktime needs a codex or smtg..I am french to ths please help. Dont understand why it doesnt show a simple camcorder recorded mpeg!!
-
I am unable to play a rented movie on my ATV 2. I get: An error occurred loading this content. Try again later. My ISP has the TCP 80 port blocked but the TCP 443 port open. My first gen. Apple TV is OK.
-
User Status (OK02) without business trans control - any negative impact?
Hi, I would like to know if there will be any negative impact if I do not maintain any business transaction control for my user statuses (OK02 config). Thanks! Vivian