BEFORE INSTALLING OSX Mavericks, do I have to create a back up of all the contents on my Mac book pro or i just have to install it and everything stays without getting deleted.
before installing osx mavericks, do i have to create a back up of all the stuff that i have on my mac book pro or can i just click install and everything stays without getting deleted.
Never Ever do anything with an operating System without backing up first.
While it is usual for a new OS to install with no loss of data, the time you do it without first backing up will most likely be the time that you wish you had backed up.
In all of the updates and upgrades Apple distributes there is a recommendation to backup your data before installing.
The easiest option is to get an external hdd if you do not already have one, plug it into the mac and follow the prompts to use the drive for Time Machine. Note that any data existing on the external hdd will be erased so use a new one or one that you are confident is ok to erase without a disaster ensuing.
Also ensure that System Preferences -> Energy Saver has been set so the Computer Sleep is Never so that the backup will not be interrupted if this is the first backup or it is a long time since the last backup was done.
Similar Messages
-
Mac book pro will not sleep after i installed mavericks
mac book pro will not sleep after i installed mavericks the sleep indicator light stays solid and fans still run but the display turns off
mac book pro will not sleep after i installed mavericks the sleep indicator light stays solid and fans still run but the display turns off
-
Im not able to use facetime at all. Do some countries have restrictions. Can anyone help me out ? I use a Mac Book pro retina display with OSx Mountain lion.
FaceTime for Mac: Troubleshooting FaceTime
-
I have safari 5.0.2 on Mac book pro, can I download safari 5.1.9 and install?
Hello,
I have safari 5.0.2 on my Mac Book Pro, can I download Safari 5.1.9 and install it on my Mac Book Pro to up date it or will it cause any problems?
Thanks
rachealfromvaThank you very much, I did download this file, opened it and says it does not recognise this file. I will try again, thanks for the re-assurance you guys give is it very much appreciated.
regards
rachealfromva -
Hallo, my AC adapter Mac Book Pro G4 shorted. Got a new one, and the laptop did not react, not even the snooze light came on. Is it possible that it got damaged inside? Which part, in that event, got damaged, and where do I look inside the laptop for which part to replace? Did anyone of you had similar experience?
If you keep getting a 'red' message it means that the HDD is faulty and will have to be replaced. You will have to format the new HDD in Disk Utility>Erase and then install the OSX and your data from Time Machine.
Ciao. -
Hello,
Please help to find my stolen mac book pro - 15 inch,
I have only the serial number of it but Unfortunately I did not have iCloud on it, all my data and researches are there,
The Operating System is mac but I don't remember which version (I think it is the latest because it is updated), also windows & VMWare are installed
WHo can help, please contact me...
HudaAs Chris indicated, there is no way to track your MacBook without having set up the Find My Mac feature beforehand (and even if you did, it's quite easily defeated) or having some third-party tracking software installed. All you can do is file a report with the police and hope they get lucky. I can only hope that you made backups of your data and "researches", since I agree with Chris that your chances of ever getting the MacBook back are not good.
You posted in the iTunes for Windows forum, by the way; just so you're aware for future questions.
Regards. -
I have recently purchased a hybred 750GbHDD as an upgrade for my MAC Book Pro (Intell Version) I have a boot camp partition to the original 500GB HDD. How can I expand both partitions to fit the new drive?
I have tried bootcamp and have had no luck due to the fact that boot camp doesn't see the additional HDD space of 250Gb. What am I not doing?Ouch, well there is a problem.
This is the stack of partitions on your old drive
EFI (hidden)
Lion (50GB say)
Bootcamp (50GB say)
Lion Recovery Partiton (hidden)
This is the same stack on your new drive imaged from the old one.
EFI (hidden)
Lion (50GB say)
Bootcamp (50GB say)
Lion Recovery Partiton (hidden)
Emtpy Space (100GB say)
This is what you want
EFI (hidden)
Lion (100GB say)
Bootcamp (100GB say)
Lion Recovery Partiton (hidden)
EFI has to be at the top of the drive and Lion Recovery has to be at the bottom of the drive.
And you only have four partitions.
You can't move the Lion Recovery Partition or Bootcamp partiton, however you can expand the Lion Partition into empty space below it. (but can't delete or move the Lion Recovery partition)
Your Duplicator duplicated perfectly, too perfectly Likely would work with same sized drives/partitions.
This is what your going to need to do.
You need to move the Bootcamp partition to a blank external drive using WinClone and disconnect. This is so you have two backups of it. (one on your old 500GB drive)
You will need a drive enclousre or IDE/SATA to USB adapter cable for the older 500GB drive and option key boot from it. (some enclosures can't be booted from so check first Other World Computing is good place to ask)
Download the free Carbon Copy Cloner, grab any new files off the new 750GB internal drive to the old 500GB your booted from.
Open Apple's Disk Utility and Erase with Zero option the entire internal 750GB drive and let it rip, this will map off as many bad sectors and improve reliability.
Now use Carbon Copy Cloner to clone the 500GB Lion + Lion Recovery Partitions to the internal 750GB, it will "fix" things and place Lion Recovery at the bottom of the drive where it belongs, give all the extra space to OS X Lion.
Next your going to have to follow WinClones instructions to restore your Bootcamp, likely you will have to recreate the Bootcamp partition first (in Bootcamp) to the size you want and then clone. Likely Winclone may "fix" Windows to recognize it's in a new larger partition now. I don't know you'll have to check as I haven't used it.
When Bootcamp creates the partition it will place it near the bottom next to the Lion Recovery Partition.
As you know you will have to re-validate Windows with Lord Redmond or it expires as you changed the hardware. -
my boyfriend wants to play is mac book pro through our television. what do we need? i want to get this for him for x-mas
MiniDisplayPort-to-? adapter, available at Apple stores and Best Buy and antplace selling Apple. Plugs into the Thunderbolt or "lightning bolt" port.
Replace ? with HDMI or VGA or DVI.
Know that TVs spave pixels further apart, for viewing at 10-15 ft instead of close as monitors do. Makes viewing small text at 10 ft difficult sometimes.
Another poster also recently reported that using the mouse on the external display is "laggy". Some models of Mac have only a graphics card integrated into the CPU (which can be challenged by running a big external TV) and some have a "discrete" or "second" graphics card that handles TVs better. -
My mac book pro 2.3ghz intel core i7 will not start up. I get the apple and the circle thing but thats it. Please help!!!
Give this a try:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Hi All, I recently bought a Mac Book Pro and transferred all my photos from my hard drive onto the Mac. I realised that there were some folders which didn't have the camera information embedded in the files and these files refuse to open on iPhoto. I know that the folders that have the problem were not transferred to the hard drive via a photo transfer application (I have a Canon camera) but I simply copied them out of the photo card and onto my old PC.
Is there some way I can open these pictures on my Mac? They work fine on a PC.Thanks for your reply.
The files don't open in preview either. In preview I get the error message 'The file "xxxx_xxx.jpg" could not be opened. It may be damaged or use a file format that Preview doesn't recognize'. The folders with these un-openable pictures do not even get imported into iPhoto. When I try to import them I get an error message about the files being unreadable.
The color profile information on the un-openable files is not visible but I see that all the other files from my old drive are RGB. -
I downloaded Mountain Lion on my Mac Book Pro but when I go to install it, it says "OS X cannot be installed on Lion." Any advice?
Right-Click the "Install OS X Mountain Lion" installer under /Applications and select Show Package Contents and drill down through the folders; Contents/SharedSupport. Drag the InstallESD.dmg file to your desktop. Grab an 8GB USB stick as the file is 4.35GB's and might not fit on a 4GB USB stick. Then mount the DMG by double-clicking it and stick your 8GB USB stick in and that will mount then you can use Disk Utility to restore the DMG to the 8GB USB stick. Then shutdown and reboot while holding the Option key and select the USB drive. See if that will let you install Mountain Lion.
One more thing, you have to format the USB Stick first and ensure it's set to GUID mode (under Partition tab Options button) or it won't boot.
More detailed instructions:
http://osxdaily.com/2012/02/17/make-bootable-os-x-10-8-mountain-lion-usb-install -drive/ -
I keep getting the error message "Restore Windows" When I click an icon on the desktop on my Mac Book Pro, it is not reaponding.
While holding down the option key, select "Go>Library" from the Finder. Navigate to the Preferences folder and you'll find "com.apple.finder.plist". Delete that file and restart.
Good luck,
Clinton -
I have 224GB of 8MB Bands within the sparsebundle on my Mac Book Pro
I have 224GB of 8MB bands within the sparsebundle on my Mac Book Pro. Can I delete them?
Their are 28,939 of these "Band" files dating back to day or at least to the month I purchased this Mac (2011). All the bands have different names like "303f" and "2ff1".
Please, what are they and how can I delete them? Thanks!iCloud on the Mac needs Mac OS X 10.7.2.
-
I have purchased the last Creative Suite available on disk. It will load on my old Mac Book Pro. I just bought a new Mac Book Pro and just realized there is no place to put a disk. Is there any way to load the programs to my new computer?
Buy an external optical drive such as the Apple USB SuperDrive that is made specifically for that model.
Use the optical drive of your old MBP to clone the DVDs to USB flash drives, then install from the flash drives.
Connect both computers to your local network and then share the optical drive to install the software. -
I have downloades Logic Pro 9 onto my older modfel Mac Book Pro 1,1 with OS 10.6.8 and 2 GB RAM, according to the rquirements for Logic 9. the program should run on OS 10.6.8. with 2 GB RAM, 4 GB better, but it won't open. Is my configutation too slow?
Looks as if you're just at the minimum specs - http://www.apple.com/logicpro/specs/. Says 2GB minimum, 4GB recommended. And 2GB of RAM is all the RAM the 1,1 can handle. If I were you I would call Apple's App Store service center - you have the minimum requirements, as I read it, but perhaps you need a faster processor?
I had a 1,1 but sold it when I bought my late 2011 in March of this year - maybe it's time to look at a new machine?
Clinton
Maybe you are looking for
-
Memory Leak in terminateConnection() function. How to resolve it ???
Hi, We are facing a memory leak issue in terminateConnection() function. Here is a sample code regarding that. We have run around 1.5 hours simultaneously and it was consuming around 250MB for this simple program. How could I resolve this problem ? b
-
No free Memory available in Class PERM
Hi when the user is incresed, Am getting error msg on Dev_W0. "Memory allocation failed" But my production not affected. If any one faced this kind of problem kindly share with me to avoid this issue. Thanks Jibin.
-
Windows 8.1 64bit. Webcam works with "Camera" app but not with Skype.
I've spent a few hours googling and trying out various things - all listed below. I give up - any ideas??? OS: Windows 8.1 64bitMemory: 32GBWebCam: Microsoft VX-7000. As per subject - the webcam works with the "Camera" app but not with Skype for desk
-
Hi all, this is my post, I need to integrate two VRFs, that is, a Banking corporation will expand its operations and will integrate with a financial group. These two, are customers of the same service provider, and represent each a different VRF. Now
-
I've run into a dilemma with adding a Watermark to scanned PDF files. Before adding the Watermark, they print in a wonderful grayscale with a healthy white background. After adding the watermark, all whites in the document turn a little green, even w