BEFW11S4 for an advanced user

Being a user who knows what they are doing I would like to request access to source code based information so that I may customize my router (LIKE DDWRT).  I already know you are not supported by DDWRT.  I would be looking for information that would assist me in disassembling and decompiling the firmware code?

You must not that not all routers have "open-source" source code that any can look at.

Similar Messages

  • Simple ruleset for ufw - advanced users welcomed to read and review

    Since tcp_wrappers is now flushed, I think it's time to add a firewall
    I have a very simplistic setup here and want to make sure I'm understanding this applications. My goal:
    1) Allow incoming "LAN" traffic (all ports/protocols from machines in my subsnet).  This will encompass services such as CIFS, Samba, Printing, distcc, etc. etc.
    2) Allow incoming bittorrent traffic from the entire Internal via the [Deluge] preset
    3) Allow incoming ssh connections from the entire Internet AND allow port forwarding therein.  I access my machine via tunneling through ssh.
    # ufw default deny
    Default incoming policy changed to 'deny'
    (be sure to update your rules accordingly)
    # ufw allow from 192.168.0.0/24
    Rules updated
    # ufw allow Deluge
    Rules updated
    # ufw allow SSH
    Rules updated
    Is this it?  Do I need to worry about localhost or 127.0.0.1 to facilitate the port forwarding?  For example, vnc only accepts connections from 127.0.0.1 since again, I tunnel into it from outside the LAN.  I do the same from my lighttpd.
    # ufw status
    Status: active
    To Action From
    Anywhere ALLOW 192.168.0.0/24
    Deluge ALLOW Anywhere
    SSH ALLOW Anywhere
    Last edited by graysky (2011-07-16 18:26:14)

    graysky wrote:In any file under /etc/ufw/applications.d/ although you'd have it give it a non-standard identifier since the standard one already exists in the PKG files... after looking at the PKGBUILD for ufw I don't believe that any file that the PKG installed will be spared from being overwritten.  I believe only files in the backups array are spared.
    Yup, this was spot on.  I've created a ufw-custom file and just appended My to the front of each identifier, MySamba, MySSH etc.
    [MySamba]
    title=Windows file and printer server for Unix
    description=Tools to access a server's filespace and printers via SMB
    ports=111,111/udp|111,111/tcp
    [MySSH]
    title=SSH server
    description=SSH server
    ports=11111/tcp
    [MyTransmission]
    title=Transmission
    description=Transmission BitTorrent client
    ports=11111/tcp
    Ports changed ofc
    Larsson wrote:Do one need to ad booth iptables and ufw to the daemons array in /etc/rc.conf ?
    Just ufw, make sure you
    #ufw enable
    before you do though.
    Last edited by Meyithi (2011-07-17 10:08:36)

  • E52 bug list for advanced users

    I wanted to start the compilation of a bug list for advanced users. Here is my first suggestion:
    1. SMS Functionality: 
    When trying to send SMS to a distribution list, the phone interface will ask you to choose between number and email addresses, even though the phone does understand that this is a SMS and not an email ("Text Message" appering on top)
    This happens even when the contact has one phone number only (and an email address) in the phonebook
    This does not happen when you use PC Suite to do the same task
    2. Mail for Exchange client:
    I will not go through the many -most already reported- bugs and general instability of the client. However, I will mention two that I have not seen reported anywhere so far:
    When forwarding emails, only the header (From/To/Date/Subject) is forwarded. The rest of the text, as well as possible atachments are not forwarded. This is happening -to my epxerience- every time you try to forward an email
    The client doesn't provide information (like the previous, installable client for devices such as E51, E71, etc.) as to when was the last time that sync took place, while it also doesn't show a real-time progress like the previous one. These two functionalities were very useful for controlling the Mail for Exchange process and understanding proactively if there was an issue. I consider these a must for any Business user (going through the log files to understand the same thing is obviously utterly impractical)
    The client doesn't synchronise the "Deleted Items" folder from the mail server but only locally (which means it includes emails that were deleted only from the device itself).
    The synchronization of the folders other than "Inbox" should be happening ad-hoc whenever the user is accessing these folders and requesting a sunchronization. Otherwise, we see the phenomenon of extremely lengthy synchronizations
    3.  Screen/Display:
    It would be nice, when using the smallest font, to also accordingly compress the menu choices, in order to be able to fit more on the screen. Otherwise, with the present implementation, the fonts get smaller, but the relevant menu icons are not, resulting in an assymetrical look
    4. Ovi suite:
    As a general comment, I would like to mention that -apart from totally unknown NOKIA policy with regards to Ovi vis-a-vis PC Suite- it is not appropriate for Ovi to contain less functionality than PC Suite (I am referring to SMS presentation, etc.). In general, I find Ovi much clunkier and more clumsy than PC Suite which has actually evolved well over the years as the absolute PC phone tool (and still a differentiator for Nokia). So, NOKIA, please do not screw up PC Suite for something that may be "hype" accoridng to you, but is used as a tool by many of your customers.
    5. Log:
    As in previous phones/firmware versions, when setting the Log to 30 days, only 7 or ten days are actually retained. Maybe related to phone memory, but in any case it is a nuissance
    6. SMS/VMs/Missed calls notifications:
    This is not a bug, but at least personally, I preffered the way the SMS/VMs/Missed calls notifications were displayed in the previous devices (E51, etc.), just below the active stand-by applications "ribbon", instead of at the bottom of the screen. The new implementation makes it harder to access these items than before (at least for me)
    I appeal to NOKIA to consider and fix these issues in the next firmware release(s).
    Timos Tsokanis

    @Timos , great compilation. I hope Nokia will work to resolve these quickly.
    I have been using phone since last 2-3 days and find few things in Email client really annoying.
    Also I want to understand few settings in Email client (version 2.1.0). They have made settings too complicated.
    1)Any folder except Inbox doesn't show unread email count in brackets next to folder names.
    i.e. If i delete or move 2 emails which I have not read to any folder(Deleted etc) , then deleted folder should be like Deleted(2). But right now it doesnt show anything. Strange.
    I have checked with E72 and this bug is not there.
    2) I have Gmail, Hotmail and Ovi mail as part of Nokia Messaging. But only Gmail and Hotmail actually show up when I open Messaging. All 3 show up if I open Email.
    3)What does "Download Notification" under Global settings do? Notification icon control?
    4) Why my Name field in Mailbox setting is picked from account at email.nokia.com, also even though secure connection is Yes under server settings in email.nokia.com, for same email its No in email client.
    5) Why I am not allowed to change settings in "What to sync" , e.g. Hide email older than
    6) what do settings "synchronise new updates" , "timed sync" do? No explaining in help.
    7) Setting ->Gmail(or any other)->Account settings->Account Info, why number is blank? Also please make this work with destinations support. Also connectivity setting should be in global settings.
    Best Regards,
    Suyog

  • LabVIEW Book for advanced users? German or english

    Hello,
    I am searching for a book about LabVIEW (ideally 7.1. but later versions are also ok) for advanced users.
    All the books I find on amazon are introductions for beginers.
    I have done the LabVIEW Tutorial and I am programming since a couple of years, so my level ist something like beginer II or intermediate I (compared to LabVIEW classes).
    Now I would like to improve my programing style and learn something about different VI architectures, professional design, performance optimizing, etc.
    Are there any good books in english or german?  
    Johannes
    Message Edited by johanneshoer on 09-23-2009 07:10 AM
    Greetings Johannes
    Using LabVIEW 7.1 and 2009 recently
    Solved!
    Go to Solution.

    Hi,
    have a look at this LabVIEW wiki page.
    I advice 'A software engineering approach to LabVIEW'
    Ton
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!

  • C4C Advanced Users for Marketing?

    Hello,
    I am finding it difficult to get information on the Marketing changes going on within the solution.  I understand that the major move was to the Hybris Marketing Bag, but what does that mean for the marketing functionality within Cloud for Customer?
    I have a customer who wants to add 5 Marketing Users, which is probably too small for the Hybris solution.  So what Enhanced Marketing Functionality do these users get as part of the Advanced User for Marketing role?
    The customer wants to be live with these users by end of the month, so timing is critical.
    Thank you for your guidance
    Neil Roosevelt
    YASH Technologies

    Dear Neil,
    Please work with your organizations dedicated partner contact from SAP to be able to get the right set of details relevant to this matter.
    Thank you.

  • How to create a jobsteps for a new user to run a report on portal

    Hello Experts,
    Is there any program that automatically creates a jobsteps for the new users for
    a role??
    My company BW roles are mapped with R/3. so whenever a new user is created in a R/3 role
    it comes and maps with BW Role and creates that users automatically in BW.
    Now the problem is if any new users are created in r/3 and mapped with BW. the report
    fails to run for the new users unless and until they really login in to the system.
    For ex: I have 5 new users which are created in R/3 and properly mapped with BW. But
    report fails to runs for the new users.
    ERROR: Jobs step fails for the User X
    Is there any programe that automatically creates a jobsteps for the new users??
    Please advice.
    Thanks in advance,
    Harish

    Hello Kedar,
    Do you manually add a new users to the role??
    How the reports run for new users in your company??
    Thanks,
    Harish

  • Draft Documents View is empty for a specific user

    Hi,
    For a specific user, when he goes on the Document Draft Reports, the Sales Document sub-form is empty. Meaning that when he ticks the "Sales Documents" option, the boxes to choose specific Sales Document does not exist (e.g. Sales Quotation, Sales Orders etc.). This happens no matter what are the other options (e.g Open Only or User Option).
    The other lists (Purchasing and Stock) are working properly. Again, all the other users do not experience the same issue as the form is working properly
    The installation is on 2007A SP01
    Any ideas?
    Thanks in advance
    Gerasimos

    Hi Gerasimos.......
    I'm sure this is a Bug in your system. If you have any of the adons then please Disconnect it and also try to create new Super User and give him license and then check with this new user for the same output.......
    Else I'm afraid you need to raise a support ticket to SAP.......
    Regards,
    Rahul

  • Multiple sessions for the same user

    Hi,
    The scenario is like this. The user is logged into the system using JAAS and
    has a session object created. I want to create a new session for the same user
    with the already available credentials. This is to provide the same user the access
    to the application in another window with different session object. How can do
    that in Weblogic 8.1 server ?
    thanks in advance,
    Krishna.

    Hi
    I think it would be easier to enable session time out settings using GPO considering you work in a domain environment..
    Having session timeouts settings you could say... hey after 15 min of inactivity disconnect the user and then after 15 min of disconnected session log him off
    Take a look at this URL: http://technet.microsoft.com/en-us/library/cc754272.aspx
    Hope this helps
    Best regards
    Joaquin Camarero Muñoz

  • NAC Guest Server, How to change the password for a single user?

    We have a NAC Guest Server which creates a complex password for all new users created.
    We would like to have normal/simple password for a single user. How can I get this done on a NAC Guest Server.
    Thanks in advance.

    Hi,
    You can setup 3 different flavours of passwords:
    http://www.cisco.com/en/US/docs/security/nac/guestserver/configuration_guide/20/g_guestpol.html#wp1063249.
    a. Username Policy 1 - Email address as username
    Use the guest's email address as the username. If an overlapping account with the same email address exists, a random number is added to the end of the email address to make the username unique. Overlapping accounts are accounts that have the same email address and are valid for an overlapping period of time.
    b. Username Policy 2 - Create username based on first and last names
    Create a username based on combining the first name and last name of the guest. You can set a Minimum username length for this username from 1 to 20 characters (default is 10). User names shorter than the minimum length are padded up to the minimum specified length with a random number.
    c. Username Policy 3 - Create random username
    Create a username based upon a random mixture of Alphabetic, Numeric or Other characters. Type the characters to include to generate the random characters and the number to use from each set of characters.
    Note: The total length of the username is determined by the total number of characters included.
    HTH,
    Tiago
    If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.

  • Purchase Orders form in Query Only mode for a single user

    Hi All,
    I want to make the Purchase Orders form as query only for a single user. I tried by giving 'Query_only=Yes' in the parameters section. I am getting 'FRM-04151: You cannot query records here' message more than 10 time. I know we get this message and this is applicable to all the users. But this message is comming more than 10 times.
    Is there anyway that I can restrict the Query only mode to a single user and please suggest about the message also.
    Thanks in Advance,
    Naresh

    Please post this question here: OA Framework
    There are so many special conditions and restrictions for E-Biz Suite that this forum is not the right place to ask these questions. The Apps forum at this location is the right place.

  • 500 internal server error for only single user

    Hi Experts,
    Pls help me that
    I am getting the problem of 500 Internal server error for a single user .
    Except that user remaining users are not getting this error, They are working fine
    i.e it is ESS & MSS  Package all other application working fine , this iview came from  Webdynpro .
    Regards
    Krishna

    Hi Arun,
    where can i check with that whether in DEV/PROD system...?
    I don't have access to PROD system and SU01 system too.
    Can you please guide me with the steps to get it done.
    Please check the below log which is getting displayed for the User, when he is logging in.
    Error summary
    While processing the current request, an exception occurred which could not be handled by the application or the framework.
    If the information contained on this page doesnu2019t help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this
    Root Cause
    The initial exception that caused the request to fail, was:
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: ComponentUsage(FPMConfigurationUsage): Active component must exist when getting  interface controller
    at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.ensureActiveComponent(ComponentUsage.java:773)
    at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceControllerInternal(ComponentUSage.java:348)
    at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceController(ComponentUsage.java:335)
    at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdGetFPMConfigurationUsageInterface(InternalFPMComponent.java.245)
    at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.changeToExceptionPerspective(FPMComponent.java:862)
    u2026 59 more
    Please provide me any help.
    Thanks in advance.
    Regards,
    Ponneswari A.

  • How can I create a custom environment for the guest user in Mavericks?

    Hello Mavericks insiders
    I need to setup several new MacBooks running Mavericks for school use. We want to use guest because everything is reset at each login. However, I first need to permanently customise the environment for the guest user:
    - doing program first runs
    - adjusting printer settings
    - dock settings
    - wallpper
    I think I have to copy certain library files in the Terminal. Which files exactly? From where to where? What is the correct Terminal syntax to do so?
    Many thanks in advance!
    Morgy

    Hello,
    I am not sure how I wound-up in the server forum. I am using the desktop version of OS X 10.7.4.
    Thanks

  • Remote Desktop Service Manager - configure permissions for Remote Desktop Users to Send Message, Disconnect, Logoff

    Hello, dear colleagues.
    We are using Windows Server 2012 R2 as Remote Desktop Server. Also use Windows Server 2008 R2 with Remote Desktop Service Manager to control RDS user sessions (Send Message, Disconnect, Logoff, Query Info). 
    Send Message, Disconnect, Logoff options works only for users in Administrators group.
    I can't to configure permissions for Remote Desktop Users, specific user or AD group. 
    To set permissions I'm running RDS Host Configuration on Windows Server 2008 R2 and connect to Windows Server 2012 R2. Then double-click
    RDP-Tcp, Security tab, add specific user account , AD group or configure
    advanced permissions
    for Remote Desktop Users.  
    But, as I sad above, these options works only for users in Administrators group. How to make it work for Remote Desktop Users or specific user, AD group?
    Thanks.
    P.S. If move specific user from Remote Desktop Users group to Administrators group on
    Windows Server 2012 R2 - it works. 

    Hi,
    You can prevent administrators from changing the permissions for a connection by applying the
    Do not allow local administrators to customize permissions Group Policy setting. 
    This Group Policy setting is located in Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Security
    Apart there is one command with which you can set the permission for that check the related
    article. Additionally checkthis
    thread for more detail.
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • How to get the list of collaboration rooms for a particular user??

    Hello Experts,
    I have a requirement to get the list of all the collaboration rooms for a given user. I have started developing the Web Dynpro application by reusing necessary jars required to the web dynpro application.
    on some action I am trying to execute the below code:
    IRooms roomsAPI = (IRooms) PortalRuntime.getRuntimeResources().getService(IRooms.PORTAL_SERVICE_ID);
    which I have got from help.sap.com
    But, there's some exception being raised and not able to retrieve the list of rooms.
    Could somebody tell me what am I doing wrong.
    Regards,
    Raghu.

    Hi,
    the below is the code that I have used to get the list of rooms. But I'm getting into the NullPointerException .
    I have added the catch block for time being, but could you please let me know the reason for NullPointerException?
    public void onActiongetRooms(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
        //@@begin onActiongetRooms(ServerEvent)
         IWDMessageManager msgMgr = wdComponentAPI.getMessageManager();
         try{
              IService service = PortalRuntime.getRuntimeResources().getService(IRooms.KM_SERVICE_ID);
              IRooms roomsAPI = (IRooms) service;
              String roomID = "00bd6231-fdca-2c10-919c-97bf74054b7d";
              IRoom room = roomsAPI.getRoom(roomID);
              String roomname = room.getName();
              msgMgr.reportSuccess(roomname);
         } catch (NullPointerException e) {
              // TODO: handle exception
              msgMgr.reportException("Null Error:"+e.getMessage(), true);
         catch (RoomInstantiationException e) {
              // TODO: handle exception
              msgMgr.reportException("Error :"+e.getMessage(), true);
        //@@end
    Any thoughts are much appreciated.
    Thanks in advance.
    Raghu

  • Step by step to disable Folder Redirection for a single user - Windows 7 and SBS 2011 Essentials

    OK...I got chewed (by someone I have a lot of respect for) for pounding on an old thread, so I'm starting a new one. I've got the Windows 7 Value Pack Plugin for SBS 2011 Essentials and Folder Redirection is working for everybody. What I'm looking for is
    exactly how to go into Group Policy and disable the FD for a single user. I'm not looking for quick, incomplete answers. If you don't have time to give me the 'For Dummies' version, don't bother. Sorry, but I've done all the Googling I can stand for one day
    and I'm over it! (and a little grumpy)
    Thanks in advance!
    Wayne S. CompTIA A+ CompTIA Network+ Microsoft MCP

    ... I've got the Windows 7 Value Pack Plugin for SBS 2011 Essentials and Folder Redirection is working for everybody. What I'm looking for is exactly how to go into Group Policy and disable the FD for a single user. I'm not looking for quick, incomplete
    answers....
    Hi Wayne,
    Here's what I'd do. 
    1) create a Security Group in your AD environment. Call it 'Folder Redirection Members' or something like that. Put all the user accounts in your AD environment who you want to have their folders continue to be redirected to the server, do not include the
    one user who you wish to exclude.  in other words, you're going to use a specific security group to target the Folder Redirection policy (right now, it's Domain Users, which is everyone).
    2) Edit the Group Policy that the W7PP created in your AD environment. It's likely called "W7PVP Folder Redirection".  Start with verification under the Settings tab, expand Folder Redirection beneath User Configuration states that
    Policy Removal Behaviouris set to Restore Contents.  Then proceed using the Editor, to make adjustments under the Scope tab; verify membership in Security Filtering.  Remove Domain Users,
    add in Folder Redirection Members (or whatever you named your group in step 1).
    3) on your workstation that your user you are applying the change to disable folder redirection, Log on to the domain account while connected to your network, elevate a command prompt, and perform a 'gpupdate /force' command and then reboot your computer. 
    Folder redirection configuration should be removed from the system and redirected contents should be restored back to your local path. Verify with inspection of the My Documents or other folders.
    Hope this helps. Keep in mind, no warranty implied or expressed in this advice.
    Try not to be so darn grumpy. :-/
    Jason Miller B.Comm (Hons), MCSA:Win7, MCITP, Microsoft MVP

Maybe you are looking for