Beginner in BPS- Transactional Cube - Data

Hi All,
I am presently working on a project on BPS.
and i am beginner to this area.we are supposed to create some Queries in Bex, I was intially thinking much of knowledge is required about BPS for the work I am doing.
but in one of the meeting i came to know that, the query in bex takes some of the data from InfoCube ( Transactional ) and some data from BPS.
Now I am confused. my questions are
1. Is that the case? some data from Txn InfoCube and some data from BPS? If yes, where from BPS?
2.whats the source ?
3.how do we check the data present in BPS?
4.(and some million q's like this)
can anyone please answer some of these Questions or redirect me to some of the resources where i can find answer to these questions.
any kind of help will be appreciated( with points )
Thanks
AB

Hi,
In BPS while creating the planning area in tcode BPS0, you need to give the transaction cube name .
The data which you are entering in the layout will be stored in the transaction cube.
The main difference between the transaction cube and basic cube is that in transaction cube you can read and also write the data and this is not possible with basic cubes as you can only read but cannot write the data.
We have an option to switch the Tranasaction cube such as "Loding allowed and Planning not allowed" and "Planning allowed and loading not allowed".
Once you entered the data in BPS layout, you need to swicth the transaction cube to make the request from yellow to green.
You can use this data for reporting.
Hope this helps.
Regards,
K.Manikandan.

Similar Messages

  • Incorrect product in the transactional cube for opportunity planning data.

    Hi,
    We're loading our Opportunity planning data of  CRM  in a transactional cube in BW side. Later this transactional cube data is then uploaded into a standard cube.
    For an opportunity, user enter some planning data for a given product (A). which was duly stored in transactional and then later in the standard cube.  Then  user deleted the product (A) and entered a new product (B) on CRM side.  However in the transactional cube, records for the previous product (A) also exist and the same flows to the standard cube as well.
    Fyi, delta load mechanism is in place for loading of both types of cubes.
    Could someone throw some light why the old item (product A) is still there in the cubes. coz this gives a wrong picture in the report, though the key figures for product A  are 0.
    Regards,
    Nagendra.

    A daily compression would remove the loading details of the cube that are visible to us for any back-tracking, Normally we do the compression for load requests older than 2 weeks.
    But the suggestion is good, incase i do not come up with any other soln, will think of implementing this.
    Maybe my delta load knowledge is not good enough.
    Please answer the following.
    What happens, when we're using standard data sources (with delta load) for loading data from (say) CRM to BW and for a given header guid, a item guid record is later deleted in CRM. On BW side, whether this item_guid record will still be present in the cube or be deleted.
    Regards,
    Nagendra.

  • How to load data in realtime/transactional cube for BPS

    hello all,
    I have installed the neccessary cube from business content and all the neccesary content. how do I get data in that real time/transactional cube. SInce we dont have any rules or datasource or anything so its confusing me can someone please help me.
    If you have any other imp point to share about this please help.
    Thanks in advance

    Hi Raj,
    Transactional cubes are filled with data using the BPS layouts. They do not require any update rules for this purpose.
    However you can also load the data from your source system into this cube and for this you will need to usual Update rules, InfoSource etc. Before loading data you may need to check if the Cube is enabled for Reporting (in RSA1 > right click> Swtich transactional cube.
    Hope this helps...

  • May i know how to create Transactional Infocube, Data from cube to cube

    Hi All,
    I need to create a Transactional Infocube. Can anyone help me how to create that. and how it differs from Basic cube while creating Transactional Infocube.
    My other question is how to load data from one cube to another.( is it possible from basic to transactional )
    It's urgent.
    regards,
    Ali

    Hi Ali,
    http://help.sap.com/saphelp_sem60ep1/helpdata/en/7b/a90e78d10311d4b3490050dadfb23f/frameset.htm
    Transactional InfoCubes differ from Basic InfoCubes in their ability to support parallel write accesses. Basic InfoCubes are technically optimized for read accesses .
    Use
    Transactional InfoCubes are used in connection with the entry of planning data. See also Overview of Planning with BW-BPS. The data from this kind of InfoCube is accessed transactionally, meaning data is written to the InfoCube (possibly by several users at the same time). Basic InfoCubes are not suitable for this. You should use Basic InfoCubes for read-only access (for example, when reading reference data).
    transactional infocubes can be filled with data using two different methods: using the transaction of BW-BPS to enter planning data and using BW staging, whereas planning data then cannot be loaded simultaneously.
    Anyway, the data from this kind of infocube is accessed transactionally, meaning data is written to the infocube (possibly by several users at the same time); basic infocubes are not suitable for this. I think this is the only proper use of this type of cube...
    We have an option to switch the Tranasaction cube such as "Loding allowed and Planning not allowed" and "Planning allowed and loading not allowed".
    please check these links,
    http://help.sap.com/saphelp_nw04/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm
    function module to read and write to a transactional infocube
    read and write to transactional infocube
    read and write to a transactional infocube
    Regards,
    Priyanka

  • How to write plan data into Transactional Cube from Visual Composer ?

    Dear experts,
    Visual Composer is very powerfull to build a 'nice-looking' web-report (I think is much better than Web Application Designer in term of freely position the chart/graph/table/selection parameter in anywhere we like. We can't have this flexibility in WAD) plus it also has strong integration to R/3 for posting the  transactions via RFC-Enabled Function Module (such as changing customer credit limit, approve PO, approve Sales Order, etc), so that the R/3 user won't even have to know the TrxCode.
    In addition to this, I just wondering if VC also capable to write plan data into transactional cube via Write-Enable Query. We can simply insert a BW Query into VC as planning layout (set the edit-mode to "editable") plus having some Wizards to make it more user-friendly and self-explanatory for the users.
    But I am not sure how to save the changes back to transactional cube from VC.
    Could anyone please kindly advise how to achieve this.
    "Seeing is believing" is always my learning method, so I would appreciate some "actioanable" explanation or hints.
    Many thanks,
    Sen

    Hi Sen,
    As far as I know, it's not possible to write data into transactional cubes directly from a table in Visual Composer through standar method, but it's possible to integrate a WAD with your input ready query into a URL element in VC (You can fill entry variables in VC and call WAD dinamically), so it's possible to create a planning application in VC calling dinamically WAD's.
    Another way to interact through VC is creating button objects that calls planning sequences (with BAPI calling RSPLS_PLSEQ_EXECUTE). Also can fill variables in VC and pass them to sequence.
    Regards,
    Enrique

  • Read data from transactional cube in version SEM 6.40

    Hi,
    In an exit function of the transaction BPS0, I want to read transaction datas in a transactional cube. In version BW 2.1C - SEM 3.0A, I used the function RSDPL_CUBE_DATA_READ. Now the system is in version BW 3.5 - SEM 6.40 and the function just read datas which are in request's status 'OK' (watch transaction RSA1, 'manage' on the cube). If the request as status 'indifferent; not yet finished', the function don't read its data.
    How can't I read all the transaction datas in a transactional cube.

    Dear All,
    Restamtent functionality did not help at this issue.
    What we did a Copy of the Version and attached the "old" hierachy.
    This was the only solution.
    Regards
    Oliver

  • Data from transaction cubes to text file in bw directories

    hi all
    i have 2 transactional planning cubes in BW. the data in these cubes in bw needs to be uploaded monthly in to a single text file so that APO system can access the data for some purpose.
    my question is how to upload the data from transactional cubes to the text file, which is more detailed. is that use ful to construct a ODS or CUBE(basic) on top of the transactional cubes.
    if i keep the file in BW directory whethere APO can access that.?..
    please help me out
    praveen.

    You can load data directly from the BW cubes to APO if the BW system is set up as a source system.
    If you need the file then you may want to investigate using open hub.

  • Need Help to copy data into transactional cube

    Hi,
    I am stuck in following situation, please help
    Basic Cube – cube1
    Transactional Cube – cube2
    Planning Area – PA1 for cube1
    Planning Area – PA2 for cube2
    Multi Planning Area – MPA over PA1 and PA2
    Now how do I copy all the data from cube1 and cube2? Please can anyone provide me with the steps?
    Thank you,
    sam

    Hi Sam,
    Use need to use a copy function.This function should on a level in the Multilplanning area which  includes all the characteristics and Key figures present in both Cube1 and Cube2. Create a Copy Function with fields to be changed as Planning areas i.e in the from use PA1 and in to use PA2.Now when the function is executed all the data is copied from PA1 to PA2.
    Another way would be a FOX formula ,but a copy function mentioned above should do the job.
    regards
    Sai Vishnubhatla

  • Data from transactional cube to a text file in directories

    hi all
    i have 2 transactional planning cubes in BW. the data in these cubes in bw needs to be uploaded monthly in to a single text file so that APO system can access the data for some purpose.
    my question is how to upload the data from transactional cubes to the text file, which is more detailed. is that use ful to construct a ODS or CUBE(basic) on top of the transactional cubes.
    if i keep the file in BW directory whethere APO can access that.?..
    please help me out
    praveen.

    Hello PraVeeN,
    How r u ?
    Is this not possible with InfoSpokes ???
    Best Regards....
    Sankar Kumar
    +91 98403 47141

  • How to write data from Basic Cube to Transactional Cube

    Hi experts,
    My problem is the following: I have a Transactional Infocube (IC1) and a basic Infocube (IC2). They have both the same structure. IC2 is loaded with data and other data is keyed in IC1.
    I would like to write data from IC2 to IC1 and eliminate data redundancy if there can be some.
    Can anyone tell me how I can do that?
    Thanks in advance

    Hi,
    Yes , you have to create a multiplanning area ..
      In the planning level , filter the value which you want to copy from basic to transactional cube .
    Fields to be changed : Planning area and others as per your need..
    Field for condition :  if you want to copy data from 2006 then give calyear as field for condition.
    Parameter group : give the value 'from' as basic cube  'to' as your transactional cube ..

  • How to recover selectively deleted data in Transaction cube ?

    hi Experts,
    We load data in transaction cube from manual entry layout, flat file source as well and then subsequently to basic cube.
    <b>Selective deletion has been done in transactin cube and corresponding basic cube without giving proper selection condition.</b> Therefore all the actual data for the month was deleted.
    <i><b>How can we recover all the months data ??</b></i>
    Its highly importantto recover the data as soon as possible. Quick reply will be really appreciated.
    Thanks in advance,
    Somenath

    Hello
    How r u ?
    Is there any ODS or PSA inbetween, If yes then you can load the Data from them again. Otherwise you have to load the data again.
    Best Regards....
    Sankar Kumar
    +91 98403 47141

  • Automated data load from APO to SEM transactional cube

    Hi ,
    We have BW-SEM system integrated with APO system.
    I could see automated data loads from APO to SEM transactional cube ..
    Infopackage name as "Request loaded using the APO interface without monitor log" ..
    I don't see any infopackage by this name in both the systems ( APO & SEM )..
    I am not sure how it configured ..
    Appreciate any inputs on how its happens .....
    Thanks in advance

    Hi,
    As I mentioned the starting point will be the tcode BPS0. There will be 2 planning areas created (if I am correct) one for SEM cube and the other for APO cube. The better way to find it will be goto tcode se16 and enter UPC_BW_AREA and key in the cube names in the cube field. this will give you the planning area names now look for a multiplanning area which has the 2 areas included in them (this is available in table UPC_AREAM).
    then goto BPS0 and you will have to find which function is being used to post the data.
    thanks

  • What is the diff b/w transactional cube and std cube

    What is the diff b/w transactional cube and std cube

    Hi Main differences,
    1) Trasactional infocube are optimized for writing data that is multiple user can simultaneously write data into it without much effect on the performance where as the std infocube are optimized to read the data ie.e through queries.
    2) transactional inofcubes can be loaded through SEM process as well normal laoding process.Std can be loaded only thorugh normal loading process.
    3) the way data is stored is same but the indexing and partionong aspects are different since one is optimized for writing and another one for reading.
    Thanks
    Message was edited by:
            Ajeet Singh

  • Remote and Transactional Cube

    Dear Friends,
    How a Basic Cube differs from a Transactional and Remote Cube ?
    A Small Example-  Cube Carries the Transaction data of Customer ,Material, Sales details ( characteristics) and price, Quantity and Revenue (keyfigures) .
    When do we Really have to Change or to Create the Other Cubes to hold those Data ?
    What is the Exact Purpose that a Scenario Needs the Remote and Transactional Cube ?
    I hope Remote Cube Can be created with "Infoservices" and "Source system" . What is the demand for both these options?
    Thanks well in advance ,
    Ramesh

    hi,
    Remotecbue will have  only structure and It does't hold any data.
    and it is used to bring live data to BW ..At the time of reporting only the data fetches from the source system. So it takes more time to execute.
    it will not hav update rules...
    Transactional InfoCubes are used only in conjunction with SEM. The data from this kind of InfoCube is accessed transactionally, meaning data is written to the InfoCube (possibly by several users at the same time) and reread as soon as possible. Basic InfoCubes are not suitable for this. You should use Basic InfoCubes for read-only access (for example, when reading reference data).
    Rfer
    http://help.sap.com/saphelp_bw33/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm
    thanks
    (Assign points if useful..)

  • Cube to Cube Data Transfer (Request by Request)

    Dear All,
    1. We have a cube for example: X (Transactional Cube)
    Requirement is:
    a. Create a New Cube for example: Y (Copy of the above cube)
    b. Data in Cube X should be transferred to cube Y (see the below note).
    Imp note: Data from source cube (X) to Target cube (Y) should be request by request. suppose if I have 100 requests in cube Cube X, I should get all the 100 requests into cube Y.
    How is this possible?
    Thanks in advance,
    Best Regards,
    Rama

    Why not just use ethernet and copy the files from the cube to the new iMac? You don't have to use the migration assistant. File sharing will work just fine.
    It's easy to set up a simple network between two Macs.
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh914.html

Maybe you are looking for